Bug#711187: linux-image-3.2.0-4-amd64: kernel should not rename mountpoint if nfs server is dead/unreachable
Package: src:linux
Version: 3.2.41-2
Severity: normal
Dear Maintainer,
* What led up to the situation?
nfs mount via fstab, move notebook to a different network so nfs server gets
unrachable.
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
No reaction on the mountpoint.
Related to http://bugs.debian.org/711183 and http://bugs.debian.org/711184 which are both
agains mount beeing unable to unmount the broken nfs mount or mount new ones.
After the NFS Server gets unreachable the mountpoint gets renamed:
flo@p2:~$ cat /proc/mounts | grep nfs4
pobox:/scratch/local /scratch/pobox\040(deleted) nfs4 rw,nosuid,nodev,noexec,relatime,vers=4,rsize=262144,wsize=262144,namlen=255,hard,proto=tcp,port=0,timeo=600,retra
+ns=2,sec=sys,clientaddr=192.168.177.145,minorversion=0,local_lock=none,addr=192.168.177.1 0 0
This seems to stem from the kernel fs/dcache.c
A mountpoint should not be renamed by the kernel to an ambigous name which could clash.
Flo
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/p2-root ro
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 6120.675883] ata5: SATA link down (SStatus 0 SControl 300)
[ 6120.755455] usb 1-1.4: reset full-speed USB device number 4 using ehci_hcd
[ 6120.839414] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6120.839473] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6120.853640] btusb 1-1.4:1.0: no reset_resume for driver btusb?
[ 6120.853645] btusb 1-1.4:1.1: no reset_resume for driver btusb?
[ 6120.871343] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6120.872179] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6120.886533] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6120.886959] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6120.888626] ata2.00: configured for UDMA/100
[ 6120.891869] firewire_core: rediscovered device fw0
[ 6120.923438] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
[ 6121.093959] usb 2-1.4: reset high-speed USB device number 7 using ehci_hcd
[ 6121.191348] usb 2-1.4: device firmware changed
[ 6122.279853] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6122.518181] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6122.518187] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6122.518192] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6122.522359] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6122.522365] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6122.522370] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6122.524189] ata1.00: configured for UDMA/100
[ 6122.565759] PM: resume of devices complete after 2233.298 msecs
[ 6122.684145] PM: Finishing wakeup.
[ 6122.684147] Restarting tasks ... done.
[ 6122.693587] usb 2-1.4: USB disconnect, device number 7
[ 6122.701872] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 6122.705085] qcserial 2-1.4:1.1: device disconnected
[ 6122.707435] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 6122.710560] qcserial 2-1.4:1.2: device disconnected
[ 6122.714494] video LNXVIDEO:00: Restoring backlight state
[ 6122.718666] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
[ 6122.718816] qcserial 2-1.4:1.3: device disconnected
[ 6122.794638] usb 2-1.4: new high-speed USB device number 8 using ehci_hcd
[ 6122.892528] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
[ 6122.892535] usb 2-1.4: config 1 has no interface number 0
[ 6122.894323] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
[ 6122.894328] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 6122.894331] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 6122.894333] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 6122.895872] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 6122.895954] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 6122.970156] usb 1-1.5: new high-speed USB device number 6 using ehci_hcd
[ 6123.066203] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
[ 6123.066208] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6123.066666] hub 1-1.5:1.0: USB hub found
[ 6123.066758] hub 1-1.5:1.0: 6 ports detected
[ 6123.337401] usb 1-1.5.1: new low-speed USB device number 7 using ehci_hcd
[ 6123.451644] usb 1-1.5.1: New USB device found, idVendor=04b3, idProduct=3025
[ 6123.451655] usb 1-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6123.451660] usb 1-1.5.1: Product: USB NetVista Full Width Keyboard.
[ 6123.451664] usb 1-1.5.1: Manufacturer: LITE-ON Technology
[ 6123.514103] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input12
[ 6123.514491] generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1a.0-1.5.1/input0
[ 6123.514573] usbcore: registered new interface driver usbhid
[ 6123.514595] usbhid: USB HID core driver
[ 6123.529063] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 6123.540771] usb 1-1.5.2: new low-speed USB device number 8 using ehci_hcd
[ 6123.584594] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 6123.586129] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6123.588766] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 6123.589062] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 6123.637644] usb 1-1.5.2: New USB device found, idVendor=045e, idProduct=0040
[ 6123.637652] usb 1-1.5.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 6123.637657] usb 1-1.5.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 6123.637661] usb 1-1.5.2: Manufacturer: Microsoft
[ 6123.640511] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input13
[ 6123.640849] generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.5.2/input0
[ 6123.712487] usb 1-1.5.4: new high-speed USB device number 9 using ehci_hcd
[ 6123.734846] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6123.821654] usb 1-1.5.4: New USB device found, idVendor=045e, idProduct=075d
[ 6123.821662] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6123.821667] usb 1-1.5.4: Product: Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM)
[ 6123.821671] usb 1-1.5.4: Manufacturer: Microsoft
[ 6123.823096] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM) (045e:075d)
[ 6123.828595] input: Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input14
[ 6124.494309] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 4: -110 (exp. 2).
[ 6124.793760] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 4: -110 (exp. 2).
[ 6125.072875] 9:3:1: cannot get freq at ep 0x82
[ 6125.074905] usbcore: registered new interface driver snd-usb-audio
[ 6126.215677] usb 2-1.4: USB disconnect, device number 8
[ 6126.215965] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 6126.216004] qcserial 2-1.4:1.1: device disconnected
[ 6126.278073] 9:3:1: cannot get freq at ep 0x82
[ 6126.383941] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 6126.385174] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6127.179984] usb 2-1.4: new high-speed USB device number 9 using ehci_hcd
[ 6127.274955] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
[ 6127.274962] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 6127.274967] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 6127.274970] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 6127.278097] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 6127.278236] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 6127.279389] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
[ 6127.279515] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 6127.280212] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
[ 6127.280335] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 6127.403243] 9:3:1: cannot get freq at ep 0x82
[ 6136.552088] eth0: no IPv6 routers present
** Model information
sys_vendor: LENOVO
product_name: 25379UG
product_version: ThinkPad T410
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6IET74WW (1.34 )
board_vendor: LENOVO
board_name: 25379UG
board_version: Not Available
** Loaded modules:
snd_usb_audio
snd_usbmidi_lib
usbhid
tun
hidp
hid
ip6table_filter
ip6_tables
ebtable_nat
ebtables
parport_pc
ppdev
lp
parport
bnep
rfcomm
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
pci_stub
vboxpci(O)
vboxnetadp(O)
binfmt_misc
vboxnetflt(O)
vboxdrv(O)
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
ip_tables
x_tables
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
loop
firewire_sbp2
kvm_intel
kvm
uvcvideo
videodev
v4l2_compat_ioctl32
media
qcserial
usb_wwan
usbserial
snd_hda_codec_hdmi
snd_hda_codec_conexant
i915
snd_hda_intel
snd_hda_codec
snd_hwdep
btusb
bluetooth
snd_pcm_oss
snd_mixer_oss
thinkpad_acpi
snd_pcm
nvram
snd_page_alloc
arc4
joydev
snd_seq_midi
drm_kms_helper
snd_seq_midi_event
drm
snd_rawmidi
i2c_algo_bit
iwlwifi
snd_seq
coretemp
mac80211
cfg80211
snd_seq_device
iTCO_wdt
iTCO_vendor_support
i2c_i801
i2c_core
snd_timer
mxm_wmi
intel_ips
snd
ac
battery
acpi_cpufreq
psmouse
soundcore
power_supply
wmi
tpm_tis
mperf
tpm
evdev
processor
video
button
tpm_bios
pcspkr
serio_raw
rfkill
ext4
crc16
jbd2
mbcache
sha256_generic
dm_crypt
dm_mod
microcode
sg
sr_mod
sd_mod
cdrom
crc_t10dif
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
sdhci_pci
firewire_ohci
sdhci
mmc_core
aes_generic
cryptd
firewire_core
crc_itu_t
thermal
thermal_sys
ahci
libahci
libata
ehci_hcd
e1000e
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Lenovo Device [17aa:2193]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21d6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Lenovo Device [17aa:215f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2827800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
Subsystem: Lenovo Device [17aa:2153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2828000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: Lenovo Device [17aa:215e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 40
Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2400000-f24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Memory behind bridge: f2500000-f25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2828400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 06)
Subsystem: Lenovo Device [17aa:2166]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:2168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 1860 [size=8]
Region 1: I/O ports at 1814 [size=4]
Region 2: I/O ports at 1818 [size=8]
Region 3: I/O ports at 1810 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at f2827000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: Lenovo Device [17aa:2167]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2828800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
Subsystem: Lenovo Device [17aa:2190]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2626000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1111]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0d:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01)
Subsystem: Lenovo Device [17aa:2133]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0d:00.1 System peripheral [0880]: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller] [1180:e230] (rev 01)
Subsystem: Lenovo Device [17aa:2134]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f2500400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0d:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 01) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:2136]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2500800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877]
Bus 002 Device 009: ID 05c6:9205 Qualcomm, Inc.
Bus 001 Device 006: ID 17ef:100a Lenovo ThinkPad Mini Dock Plus Series 3
Bus 001 Device 007: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard
Bus 001 Device 008: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 001 Device 009: ID 045e:075d Microsoft Corp. LifeCam Cinema
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: