--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-686: ftdi_sio disconnects FT232RL after bitbanging
- From: "FDi @ r00t3d" <tribat@r00t3d.com>
- Date: Thu, 01 Oct 2009 06:12:34 -0400
- Message-id: <20091001101234.3501.1091.reportbug@AI.koti>
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19
Severity: normal
1. Hooked the FT232RL to USB
[ 1038.709289] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1038.709396] ftdi_sio: Detected FT232RL
[ 1038.709509] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1038.714366] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1038.714443] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1038.714505] usb 1-1: Product: FT245R USB FIFO
[ 1038.714560] usb 1-1: Manufacturer: FTDI
[ 1038.714615] usb 1-1: SerialNumber: A6005qyc
2. sudo apt-get install libftdi-dev
3. gcc -lftdi -o /usr/share/doc/libftdi-dev/examples/bitbang2 /usr/share/doc/libftdi-dev/examples/bitbang2.c
4. /usr/share/doc/libftdi-dev/examples/bitbang2 -d 1 0x00
5. It works, but this appears in dmesg
[ 1046.425463] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1046.425567] ftdi_sio 1-1:1.0: device disconnected
6. /usr/share/doc/libftdi-dev/examples/bitbang2 -d 1 0xff
7. Doesn't work anymore :(
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
** Command line:
root=/dev/sda1 ro
** Not tainted
** Kernel log:
[ 12.963940] usbcore: registered new interface driver usbserial
[ 12.964044] usbserial: USB Serial support registered for generic
[ 12.964147] usbcore: registered new interface driver usbserial_generic
[ 12.964206] usbserial: USB Serial Driver core
[ 13.011865] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 13.011973] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 13.012087] ftdi_sio: Detected FT232RL
[ 13.012207] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 13.012299] usbcore: registered new interface driver ftdi_sio
[ 13.012356] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 13.320715] lirc_dev: IR Remote Control driver registered, major 61
[ 13.347738] lirc_dev: lirc_register_plugin: sample_rate: 80
[ 13.409848] input: Power Button (FF) as /class/input/input0
[ 13.426919] ACPI: Power Button (FF) [PWRF]
[ 13.427169] input: Power Button (CM) as /class/input/input1
[ 13.436587] ACPI: Power Button (CM) [PWRB]
[ 13.938683] usbcore: registered new interface driver lirc_mceusb
[ 13.938754] lirc_mceusb: USB Microsoft IR Transceiver Driver v0.2
[ 14.298636] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.368060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.446325] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.446329] intel_rng: don't want to disable this in firmware setup, and if
[ 14.446332] intel_rng: you are certain that your system has a functional
[ 14.446334] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 14.620734] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.931979] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.932146] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 14.984650] input: PC Speaker as /class/input/input2
[ 15.290666] parport_pc 00:0d: reported by Plug and Play ACPI
[ 15.290784] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 15.304088] intel8x0_measure_ac97_clock: measured 54624 usecs
[ 15.304153] intel8x0: clocking to 48000
[ 16.337625] EXT3 FS on sda1, internal journal
[ 16.913387] loop: module loaded
[ 17.119093] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[ 23.676135] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 27.310090] NET: Registered protocol family 10
[ 27.310879] lo: Disabled Privacy Extensions
[ 37.920016] eth0: no IPv6 routers present
[ 182.936366] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 182.936470] ftdi_sio 1-1:1.0: device disconnected
[ 1036.560062] usb 1-1: USB disconnect, address 2
[ 1038.508016] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 1038.704004] usb 1-1: configuration #1 chosen from 1 choice
[ 1038.709289] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1038.709396] ftdi_sio: Detected FT232RL
[ 1038.709509] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1038.714366] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1038.714443] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1038.714505] usb 1-1: Product: FT245R USB FIFO
[ 1038.714560] usb 1-1: Manufacturer: FTDI
[ 1038.714615] usb 1-1: SerialNumber: A6005qyc
[ 1046.425463] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1046.425567] ftdi_sio 1-1:1.0: device disconnected
[ 1145.747427] usbcore: deregistering interface driver ftdi_sio
[ 1145.747545] usbserial: USB Serial deregistering driver FTDI USB Serial Device
[ 1150.570026] usbcore: deregistering interface driver usbserial_generic
[ 1150.570146] usbserial: USB Serial deregistering driver generic
[ 1150.570222] usbcore: deregistering interface driver usbserial
[ 1171.020027] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1195.772023] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1197.604041] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1202.952031] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1208.316017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1229.408018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1229.960016] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1232.484017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1236.556025] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1286.776017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1329.588018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1333.564020] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1333.984023] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1339.084025] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1344.156020] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1345.964019] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 3800.196020] usb 3-3: reset high speed USB device using ehci_hcd and address 3
[ 5290.436018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 5300.316017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 5329.524043] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 6892.832059] usb 1-1: USB disconnect, address 3
[ 6894.564013] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 6894.760004] usb 1-1: configuration #1 chosen from 1 choice
[ 6894.770328] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 6894.770370] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6894.770396] usb 1-1: Product: FT245R USB FIFO
[ 6894.770417] usb 1-1: Manufacturer: FTDI
[ 6894.770437] usb 1-1: SerialNumber: A6005qyc
[ 6894.850546] usbcore: registered new interface driver usbserial
[ 6894.850601] usbserial: USB Serial support registered for generic
[ 6894.850661] usbcore: registered new interface driver usbserial_generic
[ 6894.850686] usbserial: USB Serial Driver core
[ 6894.857834] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 6894.857925] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 6894.857989] ftdi_sio: Detected FT232RL
[ 6894.858070] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 6894.858115] usbcore: registered new interface driver ftdi_sio
[ 6894.858139] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 6911.332044] usb 1-1: reset full speed USB device using uhci_hcd and address 4
[ 6911.493474] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 6911.493474] ftdi_sio 1-1:1.0: device disconnected
** Loaded modules:
Module Size Used by
ftdi_sio 44264 0
usbserial 26472 1 ftdi_sio
ipv6 235396 10
smsc47m1 8168 0
lm90 11784 0
loop 12748 0
evdev 8000 0
parport_pc 22500 0
parport 30988 1 parport_pc
pcspkr 2432 0
serio_raw 4740 0
snd_intel8x0 26268 0
snd_ac97_codec 88452 1 snd_intel8x0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62660 2 snd_intel8x0,snd_ac97_codec
snd_seq 41456 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
psmouse 32336 0
snd 45636 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_i801 7920 0
i2c_core 19828 2 lm90,i2c_i801
soundcore 6368 1 snd
rng_core 3940 0
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
shpchp 25528 0
pci_hotplug 23460 1 shpchp
container 3456 0
button 6096 0
lirc_mceusb 7648 1
lirc_dev 10548 1 lirc_mceusb
intel_agp 22524 1
agpgart 28808 1 intel_agp
ext3 105576 1
jbd 39476 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 2
usb_storage 77120 1
floppy 47716 0
ata_generic 4676 0
libata 140448 1 ata_generic
scsi_mod 129548 3 sd_mod,usb_storage,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
e100 28908 0
mii 4896 1 e100
piix 6568 0 [permanent]
ide_core 96168 2 ide_pci_generic,piix
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 7 ftdi_sio,usbserial,lirc_mceusb,usb_storage,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) (prog-if 00 [VGA controller])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel modules: i2c-i810, intelfb
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0100000-c01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1840 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at c0080c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0080800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller [8086:1039] (rev 81)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100, eepro100
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---