--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-powerpc: kernel oops on reading from HFS plus filesystem
- From: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Date: Wed, 25 Feb 2009 05:03:02 +0000
- Message-id: <20090225050302.9101.70109.reportbug@debirf-rescue>
Package: linux-image-2.6.26-1-powerpc
Version: 2.6.26-13
Severity: normal
I had mounted a journaled HFS plus filesystem read-only to access a single file on that filesystem.
The only file i was accessing at all was an 80G disk image stored at /Users/xxx/Desktop/laptop.dmg.
no other hfsplus filesystems were mounted. In fact, the only non-tmpfs filesystem in use was
a vfat filesystem.
I was running photorec on the laptop.dmg file to try to recover data from it, when i got the kernel oops below.
--dkg
-- Package-specific info:
** Version:
Linux version 2.6.26-1-powerpc (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Sat Jan 10 14:00:38 CET 2009
** Command line:
root=/dev/ram ro ramdisk_size=70000000
** Tainted: G D (128)
** Kernel log:
[ 263.225298] usb 4-2: Manufacturer: USB
[ 263.234473] usb 4-2: SerialNumber: XZ187S087WMGK8IG
[ 263.285729] usb-storage: device found at 2
[ 263.285738] usb-storage: waiting for device to settle before scanning
[ 263.789714] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 263.799193] Uniform CD-ROM driver Revision: 3.20
[ 263.895416] PowerMac i2c bus pmu 2 registered
[ 263.904572] PowerMac i2c bus pmu 1 registered
[ 263.913502] PowerMac i2c bus mac-io 0 registered
[ 263.922371] PowerMac i2c bus uni-n 1 registered
[ 263.931152] PowerMac i2c bus uni-n 0 registered
[ 264.645907] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe346eba]
[ 264.884913] b43-phy0: Broadcom 4306 WLAN found
[ 264.982274] phy0: Selected rate control algorithm 'pid'
[ 265.529072] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 265.561573] snd-aoa-fabric-layout: found bus with layout 51
[ 265.570172] snd-aoa-fabric-layout: Using direct GPIOs
[ 265.594474] snd-aoa-codec-tas: found 'deq' node
[ 265.594512] snd-aoa-fabric-layout: can use this codec
[ 265.672897] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a
[ 268.263068] device-mapper: uevent: version 1.0.3
[ 268.272791] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 268.293782] usb-storage: device scan complete
[ 268.294832] scsi 1:0:0:0: Direct-Access USB DISK 2.0 1219 PQ: 0 ANSI: 0 CCS
[ 268.639061] Driver 'sd' needs updating - please use bus_type methods
[ 268.665639] sd 1:0:0:0: [sda] 1957888 512-byte hardware sectors (1002 MB)
[ 268.674967] sd 1:0:0:0: [sda] Write Protect is off
[ 268.683191] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 268.683196] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 268.721810] sd 1:0:0:0: [sda] 1957888 512-byte hardware sectors (1002 MB)
[ 268.741738] sd 1:0:0:0: [sda] Write Protect is off
[ 268.750258] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 268.750262] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 268.758731] sda: [mac] sda1 sda2 sda3
[ 268.775102] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 587.801824] ieee1394: Error parsing configrom for node 0-00:1023
[ 587.809815] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 604.334145] ieee1394: Node added: ID:BUS[0-00:1023] GUID[00d04b00e0000550]
[ 604.515561] scsi2 : SBP-2 IEEE-1394
[ 605.528565] ieee1394: sbp2: Logged into SBP-2 device
[ 605.537136] ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
[ 605.548466] scsi 2:0:0:0: Direct-Access-RBC IC35L060 AVER07-0 ER6O PQ: 0 ANSI: 4
[ 605.593723] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 605.613742] sd 2:0:0:0: [sdb] Write Protect is off
[ 605.622222] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 605.634084] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 605.643655] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 605.665714] sd 2:0:0:0: [sdb] Write Protect is off
[ 605.674342] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 605.686083] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 605.694909] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[ 605.740840] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 676.248786] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 676.254318] sd 2:0:0:0: [sdb] Write Protect is off
[ 676.257912] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 676.261261] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 676.265197] sdb: sdb1
[ 718.761870] eth0: Link is up at 100 Mbps, full-duplex.
[ 729.506089] eth0: Link is up at 100 Mbps, full-duplex.
[ 729.512471] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 2568.590413] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[ 4968.702722] Unable to handle kernel paging request for data at address 0x00000628
[ 4968.702983] Faulting instruction address: 0xf25b8f9c
[ 4968.703155] Oops: Kernel access of bad area, sig: 11 [#1]
[ 4968.703326] PowerMac
[ 4968.703398] Modules linked in: hfsplus nls_utf8 nls_cp437 vfat fat nls_base sbp2 sd_mod dm_crypt dm_mod snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa arc4 ecb crypto_blkcipher b43 rfkill rng_core mac80211 cfg80211 input_polldev i2c_powermac ide_cd_mod cdrom snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc snd soundcore snd_aoa_soundbus ohci1394 sungem sungem_phy ieee1394 ide_disk usb_storage ehci_hcd scsi_mod usbhid hid ff_memless ssb pcmcia yenta_socket rsrc_nonstatic firmware_class pcmcia_core uninorth_agp agpgart evdev
[ 4968.705320] NIP: f25b8f9c LR: f25bb8a8 CTR: c00890f8
[ 4968.705478] REGS: c3639b30 TRAP: 0300 Not tainted (2.6.26-1-powerpc)
[ 4968.705683] MSR: 00009032 <EE,ME,IR,DR> CR: 24024484 XER: 20000000
[ 4968.705946] DAR: 00000628, DSISR: 40000000
[ 4968.706076] TASK = c522b0d0[4753] 'photorec' THREAD: c3638000
[ 4968.706255] GPR00: 00000000 c3639be0 c522b0d0 00000628 c364ac8c 0000004c 0000000c 00000000
[ 4968.706585] GPR08: 00009032 c03bbad0 c041b114 00000000 a1f16000 1006f120 bfe33234 105ad000
[ 4968.706914] GPR16: f25b60bc 00000000 d4ebac88 00000000 00000000 c3686998 c3638000 00001000
[ 4968.707244] GPR24: 00000000 000074e7 00000000 00000863 c364ac8c c50b82ec 0000000c 0000000c
[ 4968.707575] NIP [f25b8f9c] hfsplus_bnode_read+0x50/0x1ec [hfsplus]
[ 4968.707802] LR [f25bb8a8] __hplusfs_brec_find+0x6c/0x138 [hfsplus]
[ 4968.708010] Call Trace:
[ 4968.708090] [c3639be0] [c011a6fc] elv_merged_request+0x38/0x64 (unreliable)
[ 4968.708330] [c3639c00] [f25bb8a8] __hplusfs_brec_find+0x6c/0x138 [hfsplus]
[ 4968.708558] [c3639c40] [f25bba20] hfsplus_brec_find+0xac/0x134 [hfsplus]
[ 4968.708782] [c3639c80] [f25b5b6c] hfsplus_ext_read_extent+0xa8/0x164 [hfsplus]
[ 4968.709021] [c3639cd0] [f25b6198] hfsplus_get_block+0xdc/0x210 [hfsplus]
[ 4968.709244] [c3639d00] [c00caaec] block_read_full_page+0x138/0x3d0
[ 4968.709456] [c3639d70] [f25b45c8] hfsplus_readpage+0x1c/0x2c [hfsplus]
[ 4968.709674] [c3639d80] [c00834e0] __do_page_cache_readahead+0x18c/0x1ec
[ 4968.709899] [c3639dc0] [c007d300] generic_file_aio_read+0x224/0x544
[ 4968.710105] [c3639e30] [c00a0a08] do_sync_read+0xb8/0x10c
[ 4968.710291] [c3639ef0] [c00a1550] vfs_read+0xc0/0x19c
[ 4968.719646] [c3639f10] [c00a1af8] sys_pread64+0x64/0x94
[ 4968.728920] [c3639f40] [c0013968] ret_from_syscall+0x0/0x40
[ 4968.738251] --- Exception: c01 at 0xfda7078
[ 4968.747523] LR = 0xfda701c
[ 4968.756678] Instruction dump:
[ 4968.765756] 54bb053e 7ca56670 23fb1000 54a5103a 7f9f3000 38a50030 7fa32a14 409d0008
[ 4968.775141] 7cdf3378 7c63282e 3d20c03c 3929bad0 <81630000> 556b17be 1d6b0298 7d6b4a14
[ 4968.784730] ---[ end trace dad8d3d0672ae302 ]---
[ 5487.124585] NET: Registered protocol family 10
[ 5487.125950] lo: Disabled Privacy Extensions
[ 5498.121710] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 287816 10
hfsplus 84228 1
nls_utf8 5248 2
nls_cp437 8992 1
vfat 14208 1
fat 52188 1 vfat
nls_base 10624 5 hfsplus,nls_utf8,nls_cp437,vfat,fat
sbp2 23116 1
sd_mod 28656 2
dm_crypt 17316 0
dm_mod 60524 1 dm_crypt
snd_aoa_codec_tas 15200 2
snd_aoa_fabric_layout 14408 0
snd_aoa 19840 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
arc4 5184 2
ecb 6464 2
crypto_blkcipher 21188 2 dm_crypt,ecb
b43 134400 0
rfkill 10132 1 b43
rng_core 8036 1 b43
mac80211 169868 1 b43
cfg80211 29328 1 mac80211
input_polldev 7752 1 b43
i2c_powermac 7552 0
ide_cd_mod 35812 0
cdrom 40216 1 ide_cd_mod
snd_aoa_i2sbus 22820 1
snd_pcm 79780 1 snd_aoa_i2sbus
snd_timer 25508 1 snd_pcm
snd_page_alloc 12392 1 snd_pcm
snd 61876 6 snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 10244 1 snd
snd_aoa_soundbus 9060 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
ohci1394 35888 1
sungem 32772 0
sungem_phy 14848 1 sungem
ieee1394 91584 2 sbp2,ohci1394
ide_disk 16448 2
usb_storage 92232 0
ehci_hcd 41132 0
scsi_mod 153836 3 sbp2,sd_mod,usb_storage
usbhid 48196 0
hid 45256 1 usbhid
ff_memless 8520 1 usbhid
ssb 45924 1 b43
pcmcia 38928 2 b43,ssb
yenta_socket 28332 1
rsrc_nonstatic 13216 1 yenta_socket
firmware_class 11296 2 b43,pcmcia
pcmcia_core 41112 5 b43,ssb,pcmcia,yenta_socket,rsrc_nonstatic
uninorth_agp 12008 1
agpgart 37884 1 uninorth_agp
evdev 13728 0
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
Kernel modules: uninorth-agp
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f1000000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
0001:10:17.0 Class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 27
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 28
0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0002:24:0d.0 Class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
Kernel modules: sungem
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.26-1-powerpc
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-powerpc depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-powerpc recommends no packages.
Versions of packages linux-image-2.6.26-1-powerpc suggests:
pn linux-doc-2.6.26 <none> (no description available)
pn mkvmlinuz <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-powerpc/preinst/abort-install-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/preinst/overwriting-modules-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/postinst/old-dir-initrd-link-2.6.26-1-powerpc: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-powerpc/postinst/depmod-error-2.6.26-1-powerpc: false
linux-image-2.6.26-1-powerpc/prerm/would-invalidate-boot-loader-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/postinst/create-kimage-link-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/postinst/old-initrd-link-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/initrd-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/preinst/abort-overwrite-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/prerm/removing-running-kernel-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/failed-to-move-modules-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-powerpc/preinst/elilo-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/lilo-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/bootloader-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-powerpc/postinst/bootloader-test-error-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/depmod-error-initrd-2.6.26-1-powerpc: false
linux-image-2.6.26-1-powerpc/postinst/bootloader-error-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/old-system-map-link-2.6.26-1-powerpc: true
--- End Message ---