[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#487452: marked as done (quirk needed for some USB disk enclosures)

Your message dated Tue, 4 Jun 2013 00:28:24 +0200
with message-id <20130603222824.GA5604@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #487452,
regarding quirk needed for some USB disk enclosures
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
487452: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487452
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports
Version: 2.35
Severity: normal

Image version: http://www.cyrius.com/debian/nslu2/files/tmp/debian-armel-5.0beta2.zip

Machine: nslu2

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [E]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

There was no /etc/environment installed. pam already has a long-open bug about
that.

I always forget to select the usb-storage and ext3 modules when
installing a slug, and this time was no exception; I ended up having to go
back from partman twice to get all the necessary bits for it to see the drive.

For some reason, partman did not detect that my existing /dev/hda3 was a
pre-formatted ext3 filesystem with /home on it. So I couldn't set up the
mounting of that in partman (without reformatting it).

/etc/fstab ended up with an /media/floppy mountpoint for /dev/sda. Which 
was weird, because /dev/sda is a (very cheap) USB ide laptop disk enclosure;
/dev/sda1 is the root filesystem. Seems to happen because ID_TYPE is
reported as floppy:

root@slug:/etc/ssl/certs>udevinfo -q env -p /block/sda   
ID_VENDOR=Myson_Century,_Inc.
ID_MODEL=USB_Mass_Storage_Device
ID_REVISION=b008
ID_SERIAL=Myson_Century,_Inc._USB_Mass_Storage_Device_100
ID_SERIAL_SHORT=100
ID_TYPE=floppy
ID_BUS=usb
ID_PATH=pci-0000:00:01.2-usb-0:1:1.0-scsi-0:0:0:0

I don't know if this is a kernel or a hardware bug. I do wonder if d-i
should trust the ID_TYPE at all.

Armel is so much faster on this de-underclocked slug than arm that
it's a pleasure to use!

-- 

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20080522"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux snail 2.6.24-1-ixp4xx #1 Tue May 13 10:43:34 UTC 2008 armv5tel unknown
lspci -knn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: 	Kernel driver in use: ohci_hcd
lspci -knn: 	Kernel modules: ohci-hcd
lspci -knn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: 	Kernel driver in use: ohci_hcd
lspci -knn: 	Kernel modules: ohci-hcd
lspci -knn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
lspci -knn: 	Kernel driver in use: ehci_hcd
lspci -knn: 	Kernel modules: ehci-hcd
lsmod: Module                  Size  Used by
lsmod: reiserfs              259572  0 
lsmod: sd_mod                 26896  3 
lsmod: usb_storage            84263  2 
lsmod: scsi_mod              120276  2 sd_mod,usb_storage
lsmod: ext3                  138056  1 
lsmod: jbd                    49748  1 ext3
lsmod: vfat                   13024  0 
lsmod: fat                    55228  1 vfat
lsmod: ext2                   73320  0 
lsmod: mbcache                 9088  2 ext3,ext2
lsmod: ehci_hcd               34252  0 
lsmod: ohci_hcd               21284  0 
lsmod: evdev                  11520  0 
lsmod: ixp4xx_eth             16088  0 
lsmod: ixp4xx_npe              8608  2 ixp4xx_eth
lsmod: firmware_class         10048  1 ixp4xx_npe
lsmod: ixp4xx_beeper           3488  0 
lsmod: ixp4xx_qmgr             6040  6 ixp4xx_eth
lsmod: usbcore               139032  4 usb_storage,ehci_hcd,ohci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                    14848        20     14828   0% /dev
df: tmpfs                    14848        20     14828   0% /dev
df: /dev/sda1              2893628    545252   2201384  20% /target
df: /dev/sda1              2893628    545252   2201384  20% /dev/.static/dev
df: tmpfs                    14848        20     14828   0% /target/dev
free:               total         used         free       shared      buffers
free:   Mem:        29700        27908         1792            0          752
free:  Swap:       136544         4080       132464
free: Total:       166244        31988       134256
/proc/cpuinfo: Processor	: XScale-IXP42x Family rev 1 (v5l)
/proc/cpuinfo: BogoMIPS	: 266.24
/proc/cpuinfo: Features	: swp half fastmult edsp 
/proc/cpuinfo: CPU implementer	: 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant	: 0x0
/proc/cpuinfo: CPU part	: 0x41f
/proc/cpuinfo: CPU revision	: 1
/proc/cpuinfo: Cache type	: undefined 5
/proc/cpuinfo: Cache clean	: undefined 5
/proc/cpuinfo: Cache lockdown	: undefined 5
/proc/cpuinfo: Cache format	: Harvard
/proc/cpuinfo: I size		: 32768
/proc/cpuinfo: I assoc		: 32
/proc/cpuinfo: I line length	: 32
/proc/cpuinfo: I sets		: 32
/proc/cpuinfo: D size		: 32768
/proc/cpuinfo: D assoc		: 32
/proc/cpuinfo: D line length	: 32
/proc/cpuinfo: D sets		: 32
/proc/cpuinfo: 
/proc/cpuinfo: Hardware	: Linksys NSLU2
/proc/cpuinfo: Revision	: 0000
/proc/cpuinfo: Serial		: 0000000000000000
/proc/ioports: 00000000-0000ffff : PCI I/O Space
/proc/iomem: 00000000-01ffffff : System RAM
/proc/iomem:   00022000-00294fff : Kernel text
/proc/iomem:   00296000-002cfd77 : Kernel data
/proc/iomem: 48000000-4bffffff : PCI Memory Space
/proc/iomem:   48000000-48000fff : 0000:00:01.0
/proc/iomem:     48000000-48000fff : ohci_hcd
/proc/iomem:   48001000-48001fff : 0000:00:01.1
/proc/iomem:     48001000-48001fff : ohci_hcd
/proc/iomem:   48002000-480020ff : 0000:00:01.2
/proc/iomem:     48002000-480020ff : ehci_hcd
/proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0
/proc/iomem:   50000000-50ffffff : IXP4XXFlash
/proc/iomem: 60000000-60003fff : IXP4xx Queue Manager
/proc/iomem: c8000000-c8000fff : serial8250.0
/proc/iomem:   c8000000-c800001f : serial
/proc/iomem: c8001000-c8001fff : serial8250.0
/proc/iomem:   c8001000-c800101f : serial
/proc/iomem: c8007000-c8007fff : NPE-B
/proc/iomem: c8008000-c8008fff : NPE-C
/proc/iomem: c8009000-c8009fff : eth0
/proc/iomem: c800b000-c800bfff : pxa2xx-udc
/proc/interrupts:            CPU0
/proc/interrupts:   3:     114292      IXP4xx  IXP4xx Queue Manager
/proc/interrupts:   5:     899769      IXP4xx  timer1
/proc/interrupts:  11:       1319      IXP4xx  ixp4xx-beeper
/proc/interrupts:  15:        976      IXP4xx  serial
/proc/interrupts:  22:          0      IXP4xx  NSLU2 power button
/proc/interrupts:  26:    3389432      IXP4xx  ehci_hcd:usb3
/proc/interrupts:  27:          0      IXP4xx  ohci_hcd:usb2
/proc/interrupts:  28:          8      IXP4xx  ohci_hcd:usb1
/proc/interrupts:  29:          0      IXP4xx  NSLU2 reset button
/proc/interrupts: Err:          0
/proc/meminfo: MemTotal:        29700 kB
/proc/meminfo: MemFree:          1776 kB
/proc/meminfo: Buffers:           752 kB
/proc/meminfo: Cached:          19264 kB
/proc/meminfo: SwapCached:       1720 kB
/proc/meminfo: Active:          12572 kB
/proc/meminfo: Inactive:         9716 kB
/proc/meminfo: SwapTotal:      136544 kB
/proc/meminfo: SwapFree:       132464 kB
/proc/meminfo: Dirty:             396 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:        2084 kB
/proc/meminfo: Mapped:           1560 kB
/proc/meminfo: Slab:             2916 kB
/proc/meminfo: SReclaimable:     1244 kB
/proc/meminfo: SUnreclaim:       1672 kB
/proc/meminfo: PageTables:        300 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: CommitLimit:    151392 kB
/proc/meminfo: Committed_AS:     9620 kB
/proc/meminfo: VmallocTotal:   991232 kB
/proc/meminfo: VmallocUsed:     16876 kB
/proc/meminfo: VmallocChunk:   966652 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="ixp4xx beeper"
/proc/bus/input/devices: P: Phys=ixp4xx/gpio
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event0 
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices: 

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.24-1-ixp4xx
Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

installation-report depends on no packages.

Versions of packages installation-report recommends:
ii  pciutils                      1:3.0.0-4  Linux PCI Utilities
ii  reportbug                     3.41       reports bugs in the Debian distrib

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: