[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#517748: marked as done (linux-image-2.6.26-1-686 System locks up under heavy disk load (MD Resync e.g.))



Your message dated Mon, 3 Jun 2013 19:03:10 +0200
with message-id <20130603170310.GC5319@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #517748,
regarding linux-image-2.6.26-1-686 System locks up under heavy disk load (MD Resync e.g.)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
517748: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517748
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal

Upgraded the system from Etch to Lenny, last week of february. First of march was periodic mdadm check of the RAID arrays (md0 RAID1, md1+md2 RAID5) revealed a serious issue: 
The system locked up pretty bad, it stops responding for anywhere between 10~15 minutes. Inspection in /var/log/messages and dmesg revealed loads of soft lockups. Since the system did respond normal in the breef periods between the lockups, I began suspecting disk failure or something similar. CPU and MEM load showed no abnormality. In /proc/mdstat I noticed a resync of the md devices was active, a process which under etch took at most 2 hours to sync all arrays now took around 8 to 10 hours.

Some additional info:
- Contains Promise FastTrack TX4310 fakeraid (Reason for rapid upgrade to Lenny: Known issues with the Etch kernel which *could* cause corruption).
- Contains 4 samsung spinpoint disks, all attached to the Promise controller.

Another (possibly unrelated) issue I noticed at boot time. The system seems to hang for a minute or 5 during around the network initialisation, possibly also related to heavy diskio during boot?

mdadm periodic checks/resync disabled until the bug is fixed, the concerning machine is a production server. This, unfortunately, also rules out the machine as a testbox for possible fixes... I'll try if I can reproduce this issue on a different hardware platform.

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=/dev/md0 ro 

** Not tainted

** Kernel log:
[219328.329768]  disk 0, o:1, dev:sdc3
[219328.329768]  disk 1, o:1, dev:sdb3
[219328.329768]  disk 2, o:1, dev:sdd3
[219328.329768]  disk 3, o:1, dev:sda3
[219405.132574] md: md1: data-check done.
[219405.278752] RAID5 conf printout:
[219405.278752]  --- rd:4 wd:4
[219405.278752]  disk 0, o:1, dev:sdc2
[219405.278752]  disk 1, o:1, dev:sdb2
[219405.278752]  disk 2, o:1, dev:sdd2
[219405.278752]  disk 3, o:1, dev:sda2
[219719.856024] BUG: soft lockup - CPU#0 stuck for 96s! [pickup:12604]
[219719.856024] Modules linked in: ppdev parport_pc lp parport sit tunnel4 ipt_MASQUERADE xt_multiport xt_tcpudp xt_state ip6table_filter iptable_nat nf_nat nf_conntrack_ipv4 iptable_filter ip_tables jfs dm_snapshot dm_mirror dm_log dm_mod ip6t_rt ip6table_mangle ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table fuse nf_conntrack_ftp nf_conntrack usb_storage ntfs nls_base loop snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr i2c_viapro button i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache usbhid hid ff_memless raid456 async_xor async_memcpy async_tx xor raid1 md_mod sd_mod ide_pci_generic via82cxxx ide_core sata_promise via_rhine mii ata_generic libata ehci_hcd uhci_hcd usbcore scsi_mod dock thermal processor fan thermal_sys
[219719.856024] 
[219719.856024] Pid: 12604, comm: pickup Not tainted (2.6.26-1-686 #1)
[219719.856024] EIP: 0060:[<c0117c73>] EFLAGS: 00000286 CPU: 0
[219719.856024] EIP is at kunmap_atomic+0x61/0x8a
[219719.856024] EAX: fffb6000 EBX: fffb6000 ECX: c0007ed8 EDX: fffb6000
[219719.856024] ESI: 00000000 EDI: c0007ed8 EBP: dafc0200 ESP: d2ac9d64
[219719.856024]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[219719.856024] CR0: 8005003b CR2: b7fe10a4 CR3: 1ae4c000 CR4: 00000690
[219719.856024] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[219719.856024] DR6: ffff0ff0 DR7: 00000400
[219719.856024]  [<c0161c62>] ? __do_fault+0x102/0x34d
[219719.856024]  [<c0163d4e>] ? handle_mm_fault+0x2d2/0x690
[219719.856024]  [<c015fc56>] ? vma_prio_tree_insert+0x17/0x2a
[219719.856024]  [<c0166361>] ? vma_link+0xa3/0xbd
[219719.856024]  [<c01669c9>] ? mmap_region+0x2dd/0x393
[219719.856024]  [<c0115b4f>] ? do_page_fault+0x29b/0x5b8
[219719.856024]  [<c0166dc0>] ? do_mmap_pgoff+0x266/0x2b9
[219719.856024]  [<c01158b4>] ? do_page_fault+0x0/0x5b8
[219719.856024]  [<c02b980a>] ? error_code+0x72/0x78
[219719.856024]  [<c01e1b8d>] ? clear_user+0x27/0x32
[219719.856024]  [<c019a969>] ? padzero+0x16/0x24
[219719.856024]  [<c019b2dd>] ? load_elf_binary+0x661/0x108a
[219719.856024]  [<c0161330>] ? page_address+0x73/0x93
[219719.856024]  [<c0161330>] ? page_address+0x73/0x93
[219719.856024]  [<c017769e>] ? copy_strings+0x169/0x173
[219719.856024]  [<c0177763>] ? search_binary_handler+0x8f/0x1a4
[219719.856024]  [<c017889d>] ? do_execve+0x138/0x1c6
[219719.856024]  [<c010213b>] ? sys_execve+0x2a/0x4a
[219719.856024]  [<c0103853>] ? sysenter_past_esp+0x78/0xb1
[219719.856024]  =======================
[220012.144017] BUG: soft lockup - CPU#0 stuck for 75s! [snmpd:6113]
[220012.144017] Modules linked in: ppdev parport_pc lp parport sit tunnel4 ipt_MASQUERADE xt_multiport xt_tcpudp xt_state ip6table_filter iptable_nat nf_nat nf_conntrack_ipv4 iptable_filter ip_tables jfs dm_snapshot dm_mirror dm_log dm_mod ip6t_rt ip6table_mangle ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table fuse nf_conntrack_ftp nf_conntrack usb_storage ntfs nls_base loop snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr i2c_viapro button i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache usbhid hid ff_memless raid456 async_xor async_memcpy async_tx xor raid1 md_mod sd_mod ide_pci_generic via82cxxx ide_core sata_promise via_rhine mii ata_generic libata ehci_hcd uhci_hcd usbcore scsi_mod dock thermal processor fan thermal_sys
[220012.144017] 
[220012.144017] Pid: 6113, comm: snmpd Not tainted (2.6.26-1-686 #1)
[220012.144017] EIP: 0060:[<c01e05b0>] EFLAGS: 00200202 CPU: 0
[220012.144017] EIP is at skip_atoi+0x12/0x2c
[220012.144017] EAX: 00000000 EBX: c0330736 ECX: 00000004 EDX: 00000034
[220012.144017] ESI: ebc7bdc8 EDI: ebc7bf10 EBP: 00000004 ESP: ebc7bda0
[220012.144017]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[220012.144017] CR0: 8005003b CR2: b7f2c000 CR3: 2bd02000 CR4: 00000690
[220012.144017] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[220012.144017] DR6: ffff0ff0 DR7: 00000400
[220012.144017]  [<c01e0f32>] ? vsnprintf+0xf6/0x452
[220012.144017]  [<c015b0fb>] ? __alloc_pages_internal+0xb5/0x34e
[220012.144017]  [<c0163cd3>] ? handle_mm_fault+0x257/0x690
[220012.144017]  [<c018a54d>] ? seq_open+0x4d/0x6a
[220012.144017]  [<c018a58c>] ? __seq_open_private+0x22/0x3d
[220012.144017]  [<c01a770f>] ? seq_open_net+0x24/0x31
[220012.144017]  [<c0165cfd>] ? vma_adjust+0x1c6/0x399
[220012.144017]  [<c018a201>] ? seq_printf+0x2b/0x48
[220012.144017]  [<c0257445>] ? dev_seq_show+0x73/0x7b
[220012.144017]  [<c018a7b3>] ? seq_read+0x196/0x26f
[220012.144017]  [<c018a61d>] ? seq_read+0x0/0x26f
[220012.144017]  [<c01a12ba>] ? proc_reg_read+0x58/0x6b
[220012.144017]  [<c01a1262>] ? proc_reg_read+0x0/0x6b
[220012.144017]  [<c0174992>] ? vfs_read+0x81/0x11e
[220012.144017]  [<c0174de3>] ? sys_read+0x3c/0x63
[220012.144017]  [<c0103853>] ? sysenter_past_esp+0x78/0xb1
[220012.144017]  =======================
[220098.688014] BUG: soft lockup - CPU#0 stuck for 68s! [snmpd:6113]
[220098.688014] Modules linked in: ppdev parport_pc lp parport sit tunnel4 ipt_MASQUERADE xt_multiport xt_tcpudp xt_state ip6table_filter iptable_nat nf_nat nf_conntrack_ipv4 iptable_filter ip_tables jfs dm_snapshot dm_mirror dm_log dm_mod ip6t_rt ip6table_mangle ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table fuse nf_conntrack_ftp nf_conntrack usb_storage ntfs nls_base loop snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr i2c_viapro button i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache usbhid hid ff_memless raid456 async_xor async_memcpy async_tx xor raid1 md_mod sd_mod ide_pci_generic via82cxxx ide_core sata_promise via_rhine mii ata_generic libata ehci_hcd uhci_hcd usbcore scsi_mod dock thermal processor fan thermal_sys
[220098.688014] 
[220098.688014] Pid: 6113, comm: snmpd Not tainted (2.6.26-1-686 #1)
[220098.688014] EIP: 0060:[<c01a7053>] EFLAGS: 00200246 CPU: 0
[220098.688014] EIP is at proc_sys_lookup_table_one+0x38/0x3d
[220098.688014] EAX: 00000000 EBX: 00000000 ECX: 00000010 EDX: dbf17c88
[220098.688014] ESI: dbf17c88 EDI: dbf17cf0 EBP: ebc7bdfc ESP: ebc7bddc
[220098.688014]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[220098.688014] CR0: 8005003b CR2: b7f2b000 CR3: 2bd02000 CR4: 00000690
[220098.688014] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[220098.688014] DR6: ffff0ff0 DR7: 00000400
[220098.688014]  [<c01a70c3>] ? do_proc_sys_lookup+0x22/0x3d
[220098.688014]  [<c01a70f2>] ? proc_sys_revalidate+0x14/0x33
[220098.688014]  [<c017a599>] ? do_lookup+0x114/0x153
[220098.688014]  [<c017bccd>] ? __link_path_walk+0x2c4/0xb0b
[220098.688014]  [<c0115b4f>] ? do_page_fault+0x29b/0x5b8
[220098.688014]  [<c017c54b>] ? path_walk+0x37/0x70
[220098.688014]  [<c017c7fa>] ? do_path_lookup+0x122/0x184
[220098.688014]  [<c017d1dc>] ? __path_lookup_intent_open+0x42/0x72
[220098.688014]  [<c017d25b>] ? path_lookup_open+0xf/0x13
[220098.688014]  [<c017d2e6>] ? do_filp_open+0x87/0x684
[220098.688014]  [<c0164853>] ? free_pgtables+0x86/0x93
[220098.688014]  [<c010f6b9>] ? flush_tlb_mm+0x39/0x60
[220098.688014]  [<c0172bc4>] ? do_sys_open+0x40/0xb0
[220098.688014]  [<c0172c78>] ? sys_open+0x1e/0x23
[220098.688014]  [<c0103853>] ? sysenter_past_esp+0x78/0xb1
[220098.688014]  =======================

** Loaded modules:
Module                  Size  Used by
ppdev                   6468  0 
parport_pc             22500  0 
lp                      8164  0 
parport                30988  3 ppdev,parport_pc,lp
sit                     8932  0 
tunnel4                 3016  1 sit
ipt_MASQUERADE          2592  1 
xt_multiport            2816  7 
xt_tcpudp               2816  4 
xt_state                2016  1 
ip6table_filter         2432  1 
iptable_nat             4680  1 
nf_nat                 15576  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      12268  4 iptable_nat,nf_nat
iptable_filter          2624  1 
ip_tables              10160  2 iptable_nat,iptable_filter
jfs                   148812  1 
dm_snapshot            14340  0 
dm_mirror              15104  0 
dm_log                  8452  1 dm_mirror
dm_mod                 46184  3 dm_snapshot,dm_mirror,dm_log
ip6t_rt                 2496  0 
ip6table_mangle         2400  0 
ip6_tables             11376  3 ip6table_filter,ip6t_rt,ip6table_mangle
x_tables               13284  8 ipt_MASQUERADE,xt_multiport,xt_tcpudp,xt_state,iptable_nat,ip_tables,ip6t_rt,ip6_tables
ipv6                  235300  44 sit,ip6table_mangle
cpufreq_ondemand        6476  1 
acpi_cpufreq            6796  0 
freq_table              4224  2 cpufreq_ondemand,acpi_cpufreq
fuse                   42908  1 
nf_conntrack_ftp        6852  0 
nf_conntrack           55508  6 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
usb_storage            76032  0 
ntfs                  185856  0 
nls_base                6820  2 jfs,ntfs
loop                   12748  0 
snd_pcm                62596  0 
snd_timer              17800  1 snd_pcm
snd                    45604  2 snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7816  1 snd_pcm
pcspkr                  2432  0 
i2c_viapro              6836  0 
button                  6096  0 
i2c_core               19828  1 i2c_viapro
shpchp                 25528  0 
pci_hotplug            23460  1 shpchp
via_agp                 7744  1 
agpgart                28776  1 via_agp
evdev                   8000  0 
ext3                  105512  1 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
usbhid                 35904  1 
hid                    33184  1 usbhid
ff_memless              4392  1 usbhid
raid456               117264  2 
async_xor               3520  1 raid456
async_memcpy            2304  1 raid456
async_tx                6316  3 raid456,async_xor,async_memcpy
xor                    14696  2 raid456,async_xor
raid1                  18016  1 
md_mod                 67036  5 raid456,raid1
sd_mod                 22200  16 
ide_pci_generic         3908  0 [permanent]
via82cxxx               6948  0 [permanent]
ide_core               96168  2 ide_pci_generic,via82cxxx
sata_promise            9796  12 
via_rhine              18664  0 
mii                     4896  1 via_rhine
ata_generic             4676  0 
libata                140384  2 sata_promise,ata_generic
ehci_hcd               28428  0 
uhci_hcd               18672  0 
usbcore               118160  6 usb_storage,usbhid,ehci_hcd,uhci_hcd
scsi_mod              129356  3 usb_storage,sd_mod,libata
dock                    8304  1 libata
thermal                15228  0 
processor              32576  2 acpi_cpufreq,thermal
fan                     4164  0 
thermal_sys            10856  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324] (rev 03)
	Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 8
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [80] AGP version 3.5
		Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: agpgart-via
	Kernel modules: via-agp

00:00.1 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324]
	Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324]
	Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:3324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324]
	Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:7324]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fc900000-fe9fffff
	Prefetchable memory behind bridge: 9ff00000-dfefffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: shpchp

00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller [1106:5324] (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. Device [1106:0581]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at fc00 [size=16]
	Capabilities: [b0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: VIA_IDE
	Kernel modules: via82cxxx

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at ec00 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 22
	Region 4: I/O ports at e880 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at e800 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [88] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge [1106:8324]
	Subsystem: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge [1106:8324]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: i2c-viapro

00:11.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e]
	Subsystem: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128
	Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:13.0 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:324b] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:13.1 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge [1106:324a] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] [1106:3157] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Device [0908:1975]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at a0000000 (32-bit, prefetchable) [size=512M]
	Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at fe9f0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

03:08.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 8d)
	Subsystem: VIA Technologies, Inc. Device [1106:0107]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at feafec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: via-rhine
	Kernel modules: via-rhine

03:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 8d)
	Subsystem: VIA Technologies, Inc. Device [1106:0107]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at d000 [size=256]
	Region 1: Memory at feafe800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: via-rhine
	Kernel modules: via-rhine

03:0f.0 RAID bus controller [0104]: Promise Technology, Inc. PDC40719 [FastTrak TX4300/TX4310] [105a:3515] (rev 02)
	Subsystem: Promise Technology, Inc. PDC40719 [FastTrak TX4300/TX4310] [105a:3515]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 88 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at dc00 [size=128]
	Region 2: I/O ports at d800 [size=256]
	Region 3: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
	Region 4: Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at 40000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_promise
	Kernel modules: sata_promise



-- System Information:
Debian Release: 5.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
  linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
  linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: