--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.24-etchnhalf.1-686: Randomly kernel Oops in etch and half kernel image
- From: Paolo Sala <piviul@riminilug.it>
- Date: Wed, 10 Dec 2008 16:29:15 +0100
- Message-id: <20081210152915.3399.45689.reportbug@localhost.localdomain>
Package: linux-image-2.6.24-etchnhalf.1-686
Version: 2.6.24-6~etchnhalf.5
Severity: normal
I was having frequently kernel oops in etch:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481346.
Now I have installed etch and half and kernel oops are very rarelyi but I've had one today.
These are the messages shown in the ssh console I received:
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: Oops: 0000 [#1] SMP
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: Process postmaster (pid: 2918, ti=f6624000 task=f7cce730 task.ti=f6624000)
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: Stack: e5ed7908 00000001 0000073b c02c7885 00000000 00000000 f6a7a6ac 00001000
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: 00002000 0000000d 00000000 00001000 e5ed7908 f6625cf8 fffff000 c49893ec
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: fffff000 00002000 c0194337 00001000 424420e3 c17087c0 0000c000 00000000
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: Call Trace:
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0194337>] __getblk+0x23/0x27e
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0195392>] block_write_begin+0x83/0xe0
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f895764b>] ext3_get_block+0x0/0xd0 [ext3]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f8922b24>] journal_start+0x7d/0xa9 [jbd]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f8958add>] ext3_write_begin+0xd9/0x18a [ext3]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f895764b>] ext3_get_block+0x0/0xd0 [ext3]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c015bb09>] generic_file_buffered_write+0x10a/0x5a1
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f895d987>] __ext3_journal_stop+0x19/0x34 [ext3]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0190d69>] __mark_inode_dirty+0xc9/0x144
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c015c431>] __generic_file_aio_write_nolock+0x491/0x4f0
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c015c4e5>] generic_file_aio_write+0x55/0xb3
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0180fa0>] do_path_lookup+0x162/0x1c4
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<f8955014>] ext3_file_write+0x24/0x8f [ext3]
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0178593>] do_sync_write+0xc7/0x10a
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0181c87>] open_namei+0x276/0x558
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0135489>] autoremove_wake_function+0x0/0x35
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c01784cc>] do_sync_write+0x0/0x10a
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0178dd8>] vfs_write+0xa1/0x14d
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c01793f3>] sys_write+0x41/0x67
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: [<c0103e66>] sysenter_past_esp+0x6b/0xa1
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: =======================
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: Code: 24 2c 8b 5c 24 14 89 44 24 20 2b 44 24 2c 39 5c 24 44 89 44 24 1c 76 08 8b 54 24 68 39 d0 72 1f 8b 45 00 a8 08 0f 84 d2 01 00 00 <8b> 01 a8 01 0f 85 c8 01 00 00 90 0f ba 29 00 e9 be 01 00 00 8b
Message from syslogd@localhost at Wed Dec 10 15:54:06 2008 ...
localhost kernel: EIP: [<c0195071>] __block_prepare_write+0x110/0x37e SS:ESP 0068:f6625cb0
Have a great day
Piviul
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.5) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Sep 8 06:19:11 UTC 2008
** Command line:
root=/dev/md1 ro
** Not tainted
** Kernel log:
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.3: irq 10, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:09.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL8139 at 0xb800, 00:40:f4:36:0b:63, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
hdc: cache flushes supported
hdc: hdc1 hdc2 < hdc5 > hdc3
md: raid1 personality registered for level 1
md: md1 stopped.
md: bind<hdc3>
md: bind<hda3>
raid1: raid set md1 active with 2 out of 2 mirrors
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: md1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 7962696
ext3_orphan_cleanup: deleting unreferenced inode 7536649
ext3_orphan_cleanup: deleting unreferenced inode 7536648
ext3_orphan_cleanup: deleting unreferenced inode 7536647
ext3_orphan_cleanup: deleting unreferenced inode 7536646
ext3_orphan_cleanup: deleting unreferenced inode 7536645
EXT3-fs: md1: 6 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport_pc: VIA parallel port: io=0x378, irq=7
Linux agpgart interface v0.102
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 32M @ 0xfc000000
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Adding 449780k swap on /dev/hda5. Priority:-1 extents:1 across:449780k
Adding 449780k swap on /dev/hdc5. Priority:-2 extents:1 across:449780k
EXT3 FS on md1, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
md: md0 stopped.
md: bind<hdc1>
md: bind<hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
** Loaded modules:
Module Size Used by
nfs 228264 0
nfsd 204432 17
lockd 60968 3 nfs,nfsd
nfs_acl 3584 2 nfs,nfsd
auth_rpcgss 39904 1 nfsd
sunrpc 171484 11 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4832 1 nfsd
ppdev 8900 0
lp 11204 0
ipv6 242212 27
dm_snapshot 17060 0
dm_mirror 21792 0
dm_mod 56004 2 dm_snapshot,dm_mirror
ide_cd 36352 0
cdrom 32672 1 ide_cd
floppy 54724 0
button 8528 0
via686a 13868 0
psmouse 36656 0
pcspkr 3264 0
serio_raw 6788 0
i2c_viapro 8468 0
i2c_core 22656 1 i2c_viapro
rtc 13148 0
via_agp 10048 1
agpgart 31912 1 via_agp
parport_pc 26340 1
parport 34472 3 ppdev,lp,parport_pc
shpchp 31220 0
pci_hotplug 27840 1 shpchp
evdev 11200 0
ext3 123272 2
jbd 43892 1 ext3
mbcache 8480 1 ext3
raid1 22336 2
md_mod 73652 3 raid1
ide_generic 1280 0 [permanent]
ide_disk 15776 8
8139too 25728 0
ata_generic 7556 0
libata 144560 1 ata_generic
scsi_mod 141516 1 libata
8139cp 22048 0
mii 5344 2 8139too,8139cp
uhci_hcd 23568 0
via82cxxx 8036 0 [permanent]
generic 4484 0 [permanent]
usbcore 127724 2 uhci_hcd
ide_core 108740 5 ide_cd,ide_generic,ide_disk,via82cxxx,generic
thermal 16092 0
processor 36840 2 thermal
fan 4868 0
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev c4)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80e7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80e7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge [0600]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller [0300]: S3 Inc. 86c764/765 [Trio32/64/64V+] [5333:8811] (rev 54) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at 50000000 [disabled] [size=64K]
-- System Information:
Debian Release: 4.0
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'oldstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-686
Locale: LANG=it_IT@euro, LC_CTYPE=it_IT@euro (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-2.6.24-etchnhalf.1-686: false
linux-image-2.6.24-etchnhalf.1-686/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/initrd-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-install-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/prerm/removing-running-kernel-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/old-initrd-link-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/bootloader-initrd-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/elilo-initrd-2.6.24-etchnhalf.1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-overwrite-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/overwriting-modules-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/postinst/old-system-map-link-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-686: false
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-initrd-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-test-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/create-kimage-link-2.6.24-etchnhalf.1-686: true
--- End Message ---