Your message dated Sat, 01 Jun 2013 19:07:16 +0100 with message-id <1370110036.3469.510.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#710700: Kernel 3.2.0-4-686-pae: i915 module will not load. has caused the Debian Bug report #710700, regarding Kernel 3.2.0-4-686-pae: i915 module will not load. to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 710700: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=710700 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Kernel 3.2.0-4-686-pae: i915 module will not load.
- From: Melmi <hascii@gmx.net>
- Date: Sat, 1 Jun 2013 19:12:26 +0200 (CEST)
- Message-id: <[🔎] trinity-01fefa35-452e-45ad-bab3-3416e579f657-1370106745956@3capp-gmx-bs08>
Package: linux-image-3.2.0-4-686-pae Version: 3.2.41-2 After doing an "apt-get upgrade" after a few month, xorg won't start. It says it's because the i915 module is not loading. When trying a manual "modprobe -v i915" it says: ERROR: could not insert 'i915': Invalid argument Please find below output of dmesg and lspci. Please let me know if other information is needed. Best regards Markus ----- DMESG Output ------ [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) [ 0.000000] BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 7659AB7/7659AB7, BIOS 7LETB0WW (2.10 ) 01/21/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7d6b0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07E000000 mask FFE000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07D700000 mask FFFF00000 uncachable [ 0.000000] 3 base 07D800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f6900] f6900 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000 [ 0.000000] RAMDISK: 36b8a000 - 375bd000 [ 0.000000] ACPI: RSDP 000f68d0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 7d6bb731 0009C (v01 LENOVO TP-7L 00002100 LTP 00000000) [ 0.000000] ACPI: FACP 7d6bb800 000F4 (v03 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-529) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 7d6bbc1d 0FF1F (v01 LENOVO TP-7L 00002100 MSFT 03000000) [ 0.000000] ACPI: FACS 7d6e4000 00040 [ 0.000000] ACPI: SSDT 7d6bb9b4 00269 (v01 LENOVO TP-7L 00002100 MSFT 03000000) [ 0.000000] ACPI: ECDT 7d6cbb3c 00052 (v01 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI: TCPA 7d6cbb8e 00032 (v02 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI: APIC 7d6cbbc0 00068 (v01 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI: MCFG 7d6cbc28 0003C (v01 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI: HPET 7d6cbc64 00038 (v01 LENOVO TP-7L 00002100 LNVO 00000001) [ 0.000000] ACPI: SLIC 7d6cbdf0 00176 (v01 LENOVO TP-7L 00002100 LTP 00000000) [ 0.000000] ACPI: BOOT 7d6cbf66 00028 (v01 LENOVO TP-7L 00002100 LTP 00000001) [ 0.000000] ACPI: ASF! 7d6cbf8e 00072 (v16 LENOVO TP-7L 00002100 PTL 00000001) [ 0.000000] ACPI: SSDT 7d6e26d9 0025F (v01 LENOVO TP-7L 00002100 INTL 20050513) [ 0.000000] ACPI: SSDT 7d6e2938 000A6 (v01 LENOVO TP-7L 00002100 INTL 20050513) [ 0.000000] ACPI: SSDT 7d6e29de 004F7 (v01 LENOVO TP-7L 00002100 INTL 20050513) [ 0.000000] ACPI: SSDT 7d6e2ed5 008BD (v01 LENOVO TP-7L 00002100 INTL 20050513) [ 0.000000] ACPI: SSDT 7d6e3792 0069C (v01 LENOVO TP-7L 00002100 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1116MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007d6b0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007d6b0 [ 0.000000] On node 0 totalpages: 513597 [ 0.000000] free_area_init_node: node 0, pgdat c1412180, node_mem_map f5bda200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2234 pages used for memmap [ 0.000000] HighMem zone: 283640 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7e000000 (gap: 7e000000:72000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79d5000 s33280 r0 d24064 u57344 [ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509583 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/root_crypt ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007d6b0) [ 0.000000] Memory: 2021692k/2054848k available (2845k kernel code, 32696k reserved, 1353k data, 416k init, 1143496k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB) [ 0.000000] .data : 0xc12c7484 - 0xc1419a80 (1353 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c7484 (2845 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.047 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.09 BogoMIPS (lpj=7980188) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004042] Security Framework initialized [ 0.004047] AppArmor: AppArmor disabled by boot time parameter [ 0.004062] Mount-cache hash table entries: 512 [ 0.004185] Initializing cgroup subsys cpuacct [ 0.004191] Initializing cgroup subsys memory [ 0.004198] Initializing cgroup subsys devices [ 0.004200] Initializing cgroup subsys freezer [ 0.004203] Initializing cgroup subsys net_cls [ 0.004205] Initializing cgroup subsys blkio [ 0.004210] Initializing cgroup subsys perf_event [ 0.004239] CPU: Physical Processor ID: 0 [ 0.004241] CPU: Processor Core ID: 0 [ 0.004244] mce: CPU supports 6 MCE banks [ 0.004252] CPU0: Thermal monitoring enabled (TM2) [ 0.004255] using mwait in idle threads. [ 0.004652] ACPI: Core revision 20110623 [ 0.016057] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057498] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0b [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] CPU 1 irqstacks, hard=f54d2000 soft=f54d4000 [ 0.060003] Booting Node 0, Processors #1 Ok. [ 0.060003] smpboot cpu 1: start_ip = 99000 [ 0.008000] Initializing CPU#1 [ 0.148008] TSC synchronization [CPU#0 -> CPU#1]: [ 0.148008] Measured 1029200 cycles TSC warp between CPUs, turning off TSC clock. [ 0.148008] Marking TSC unstable due to check_tsc_sync_source failed [ 0.148039] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148074] Brought up 2 CPUs [ 0.148077] Total of 2 processors activated (7980.06 BogoMIPS). [ 0.150220] devtmpfs: initialized [ 0.150220] PM: Registering ACPI NVS region at 7d6cc000 (212992 bytes) [ 0.150220] print_constraints: dummy: [ 0.150220] NET: Registered protocol family 16 [ 0.150220] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.150220] ACPI: bus type pci registered [ 0.150220] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.150220] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.150220] PCI: Using MMCONFIG for extended config space [ 0.150220] PCI: Using configuration type 1 for base access [ 0.150220] bio: create slab <bio-0> at 0 [ 0.150220] ACPI: Added _OSI(Module Device) [ 0.150220] ACPI: Added _OSI(Processor Device) [ 0.150220] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.150220] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150220] ACPI: Added _OSI(Linux) [ 0.154100] ACPI: EC: EC description table is found, configuring boot EC [ 0.161206] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.168404] ACPI: SSDT 7d6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.168944] ACPI: Dynamic OEM Table Load: [ 0.168947] ACPI: SSDT (null) 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.169110] ACPI: SSDT 7d6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.172354] ACPI: Dynamic OEM Table Load: [ 0.172357] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.184262] ACPI: SSDT 7d6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.184794] ACPI: Dynamic OEM Table Load: [ 0.184797] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.184900] ACPI: SSDT 7d6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.185423] ACPI: Dynamic OEM Table Load: [ 0.185426] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.196237] ACPI: Interpreter enabled [ 0.196245] ACPI: (supports S0 S3 S4 S5) [ 0.196267] ACPI: Using IOAPIC for interrupt routing [ 0.200058] ACPI: Power Resource [PUBS] (on) [ 0.205085] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.208149] ACPI: ACPI Dock Station Driver: 4 docks/bays found [ 0.208151] HEST: Table not found. [ 0.208156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.208422] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.208488] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.208491] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.208494] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.208498] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.208500] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.208503] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.208507] pci_root PNP0A08:00: host bridge window [mem 0x7e000000-0xfebfffff] [ 0.208509] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.208526] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.208580] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.208595] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit] [ 0.208605] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.208612] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.208655] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.208668] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit] [ 0.208849] pci 0000:00:19.0: [8086:1049] type 0 class 0x000200 [ 0.208906] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff] [ 0.208932] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff] [ 0.208952] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.209151] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.209192] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.209331] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.209432] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.209567] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.209697] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.209747] pci 0000:00:1a.7: reg 10: [mem 0xfe226400-0xfe2267ff] [ 0.209973] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.210043] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.210091] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.210338] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.210410] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.210674] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.210753] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.211012] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.211092] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.211358] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.211438] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.211694] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.211767] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.212032] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.212106] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.212249] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf] [ 0.212350] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.212492] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df] [ 0.212592] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.212730] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff] [ 0.212864] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.212921] pci 0000:00:1d.7: reg 10: [mem 0xfe226800-0xfe226bff] [ 0.213183] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.213242] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.213458] pci 0000:00:1f.0: [8086:2811] type 0 class 0x000601 [ 0.213645] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.213655] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.213662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.213669] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.213676] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.213800] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101 [ 0.213846] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.213872] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.213901] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.213924] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.213950] pci 0000:00:1f.2: reg 20: [io 0x1c30-0x1c3f] [ 0.213979] pci 0000:00:1f.2: reg 24: [io 0x1c20-0x1c2f] [ 0.214085] pci 0000:00:1f.2: PME# supported from D3hot [ 0.214127] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.214167] pci 0000:00:1f.3: reg 10: [mem 0xfe226c00-0xfe226cff] [ 0.214272] pci 0000:00:1f.3: reg 20: [io 0x1c40-0x1c5f] [ 0.214511] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.214521] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.214529] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.214544] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.214756] pci 0000:03:00.0: [8086:4230] type 0 class 0x000280 [ 0.214815] pci 0000:03:00.0: reg 10: [mem 0xdf3fe000-0xdf3fffff 64bit] [ 0.215054] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.215191] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.215201] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.215210] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.215228] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.215373] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.215383] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.215393] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.215410] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.215551] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.215560] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.215570] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.215586] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.215726] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.215736] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.215743] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.215761] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.215868] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 [ 0.215911] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) [ 0.215914] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller [ 0.215948] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff] [ 0.216039] pci 0000:15:00.0: supports D1 D2 [ 0.216041] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216091] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00 [ 0.216140] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff] [ 0.216352] pci 0000:15:00.1: supports D1 D2 [ 0.216355] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216409] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805 [ 0.216456] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff] [ 0.216678] pci 0000:15:00.2: supports D1 D2 [ 0.216680] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216738] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880 [ 0.216787] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff] [ 0.217001] pci 0000:15:00.4: supports D1 D2 [ 0.217003] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217052] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880 [ 0.217097] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff] [ 0.217316] pci 0000:15:00.5: supports D1 D2 [ 0.217318] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217466] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.217476] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.217486] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.217503] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.217507] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.217510] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.217513] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.217516] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.217519] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.217522] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.217526] pci 0000:00:1e.0: bridge window [mem 0x7e000000-0xfebfffff] (subtractive decode) [ 0.217529] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode) [ 0.217700] pci_bus 0000:00: on NUMA node 0 [ 0.217703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.217846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.217884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.217921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.217957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.217999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.218040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.218357] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.218779] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.224992] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.225076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225156] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225235] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225471] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.225655] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.225655] vgaarb: loaded [ 0.225655] vgaarb: bridge control possible 0000:00:02.0 [ 0.225655] PCI: Using ACPI for IRQ routing [ 0.228428] PCI: pci_cache_line_size set to 64 bytes [ 0.228567] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.228570] reserve RAM buffer: 000000007d6b0000 - 000000007fffffff [ 0.228685] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.228692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.228697] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.232110] Switching to clocksource hpet [ 0.233924] pnp: PnP ACPI init [ 0.233939] ACPI: bus type pnp registered [ 0.234379] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.234382] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.234384] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.234387] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.234389] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.234391] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.234394] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.234397] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.234399] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled] [ 0.234402] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.234404] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.234407] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.234409] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.234411] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.234414] pnp 00:00: [mem 0x00100000-0x7dffffff] [ 0.234416] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.234419] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.234492] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.234496] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.234500] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.234503] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.234510] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.234513] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.234517] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.234520] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.234524] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.234527] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.234531] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.234534] system 00:00: [mem 0x00100000-0x7dffffff] could not be reserved [ 0.234538] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.234541] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.234545] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.234568] pnp 00:01: [bus 00-ff] [ 0.234571] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.234573] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.234576] pnp 00:01: [io 0x0d00-0xffff window] [ 0.234580] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.234583] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.234586] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.234588] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.234591] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.234593] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.234596] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.234599] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.234601] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.234604] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.234607] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.234609] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.234612] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.234615] pnp 00:01: [mem 0x7e000000-0xfebfffff window] [ 0.234617] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.234670] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.234714] pnp 00:02: [io 0x0010-0x001f] [ 0.234717] pnp 00:02: [io 0x0090-0x009f] [ 0.234719] pnp 00:02: [io 0x0024-0x0025] [ 0.234722] pnp 00:02: [io 0x0028-0x0029] [ 0.234724] pnp 00:02: [io 0x002c-0x002d] [ 0.234726] pnp 00:02: [io 0x0030-0x0031] [ 0.234729] pnp 00:02: [io 0x0034-0x0035] [ 0.234731] pnp 00:02: [io 0x0038-0x0039] [ 0.234733] pnp 00:02: [io 0x003c-0x003d] [ 0.234735] pnp 00:02: [io 0x00a4-0x00a5] [ 0.234738] pnp 00:02: [io 0x00a8-0x00a9] [ 0.234740] pnp 00:02: [io 0x00ac-0x00ad] [ 0.234742] pnp 00:02: [io 0x00b0-0x00b5] [ 0.234744] pnp 00:02: [io 0x00b8-0x00b9] [ 0.234747] pnp 00:02: [io 0x00bc-0x00bd] [ 0.234749] pnp 00:02: [io 0x0050-0x0053] [ 0.234751] pnp 00:02: [io 0x0072-0x0077] [ 0.234754] pnp 00:02: [io 0x164e-0x164f] [ 0.234756] pnp 00:02: [io 0x002e-0x002f] [ 0.234758] pnp 00:02: [io 0x1000-0x107f] [ 0.234760] pnp 00:02: [io 0x1180-0x11bf] [ 0.234763] pnp 00:02: [io 0x0800-0x080f] [ 0.234765] pnp 00:02: [io 0x15e0-0x15ef] [ 0.234767] pnp 00:02: [io 0x1600-0x165f] [ 0.234770] pnp 00:02: [mem 0xf0000000-0xf3ffffff] [ 0.234772] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.234775] pnp 00:02: [mem 0xfed14000-0xfed17fff] [ 0.234777] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.234780] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.234782] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.234881] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.234884] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.234888] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.234891] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.234894] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.234897] system 00:02: [io 0x1600-0x165f] could not be reserved [ 0.234901] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.234904] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.234908] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.234911] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.234914] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.234918] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.234921] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234960] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.234994] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.235005] pnp 00:04: [io 0x0000-0x000f] [ 0.235009] pnp 00:04: [io 0x0080-0x008f] [ 0.235011] pnp 00:04: [io 0x00c0-0x00df] [ 0.235014] pnp 00:04: [dma 4] [ 0.235046] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.235055] pnp 00:05: [io 0x0061] [ 0.235086] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.235096] pnp 00:06: [io 0x00f0] [ 0.235105] pnp 00:06: [irq 13] [ 0.235138] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.235148] pnp 00:07: [io 0x0070-0x0071] [ 0.235154] pnp 00:07: [irq 8] [ 0.235187] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.235198] pnp 00:08: [io 0x0060] [ 0.235200] pnp 00:08: [io 0x0064] [ 0.235206] pnp 00:08: [irq 1] [ 0.235238] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.235251] pnp 00:09: [irq 12] [ 0.235286] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.235600] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.235884] pnp 00:0b: [io 0x03bc-0x03be] [ 0.235891] pnp 00:0b: [irq 7] [ 0.235971] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.236204] pnp 00:0c: [mem 0xfed40000-0xfed44fff] [ 0.236242] pnp 00:0c: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.236899] pnp: PnP ACPI: found 13 devices [ 0.236902] ACPI: ACPI bus type pnp unregistered [ 0.236905] PnPBIOS: Disabled by ACPI PNP [ 0.274341] PCI: max bus depth: 2 pci_try_num: 3 [ 0.274411] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.274416] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.274423] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.274429] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.274439] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.274443] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.274450] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.274456] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.274465] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.274469] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.274477] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.274483] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.274492] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.274496] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.274503] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.274509] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.274518] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.274522] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.274530] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.274536] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.274551] pci 0000:15:00.0: BAR 16: assigned [mem 0x80000000-0x83ffffff] [ 0.274554] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] [ 0.274558] pci 0000:15:00.0: BAR 14: assigned [io 0x7000-0x70ff] [ 0.274561] pci 0000:15:00.0: BAR 13: assigned [io 0x7400-0x74ff] [ 0.274564] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.274567] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff] [ 0.274573] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff] [ 0.274580] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.274586] pci 0000:15:00.0: bridge window [mem 0x80000000-0x83ffffff] [ 0.274593] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.274597] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.274605] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.274611] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.274635] pci 0000:00:1c.0: setting latency timer to 64 [ 0.274649] pci 0000:00:1c.1: setting latency timer to 64 [ 0.274665] pci 0000:00:1c.2: setting latency timer to 64 [ 0.274678] pci 0000:00:1c.3: setting latency timer to 64 [ 0.274689] pci 0000:00:1c.4: setting latency timer to 64 [ 0.274695] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.274703] pci 0000:00:1e.0: setting latency timer to 64 [ 0.274719] pci 0000:15:00.0: setting latency timer to 64 [ 0.274724] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.274727] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.274730] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.274733] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.274735] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.274738] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.274741] pci_bus 0000:00: resource 10 [mem 0x7e000000-0xfebfffff] [ 0.274744] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.274746] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.274749] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff] [ 0.274752] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.274755] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.274757] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff] [ 0.274760] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.274763] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.274766] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff] [ 0.274769] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.274771] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.274774] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff] [ 0.274777] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.274780] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff] [ 0.274782] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.274785] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.274788] pci_bus 0000:15: resource 0 [io 0x7000-0xafff] [ 0.274790] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff] [ 0.274793] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.274796] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.274799] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.274801] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.274804] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.274807] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.274809] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff] [ 0.274812] pci_bus 0000:15: resource 10 [mem 0x7e000000-0xfebfffff] [ 0.274815] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.274818] pci_bus 0000:16: resource 0 [io 0x7400-0x74ff] [ 0.274820] pci_bus 0000:16: resource 1 [io 0x7000-0x70ff] [ 0.274823] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.274826] pci_bus 0000:16: resource 3 [mem 0x80000000-0x83ffffff] [ 0.274882] NET: Registered protocol family 2 [ 0.274947] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.275191] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.275554] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.275733] TCP: Hash tables configured (established 131072 bind 65536) [ 0.275735] TCP reno registered [ 0.275738] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.275747] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.275823] NET: Registered protocol family 1 [ 0.275837] pci 0000:00:02.0: Boot video device [ 0.275878] pci 0000:00:1a.1: power state changed by ACPI to D0 [ 0.275881] pci 0000:00:1a.1: power state changed by ACPI to D0 [ 0.275911] pci 0000:00:1a.7: power state changed by ACPI to D0 [ 0.275916] pci 0000:00:1a.7: power state changed by ACPI to D0 [ 0.275971] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.275974] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.276052] pci 0000:00:1d.2: power state changed by ACPI to D0 [ 0.276055] pci 0000:00:1d.2: power state changed by ACPI to D0 [ 0.276088] pci 0000:00:1d.7: power state changed by ACPI to D0 [ 0.276093] pci 0000:00:1d.7: power state changed by ACPI to D0 [ 0.276156] PCI: CLS 64 bytes, default 64 [ 0.276212] Unpacking initramfs... [ 0.579531] Freeing initrd memory: 10444k freed [ 0.585517] Simple Boot Flag at 0x35 set to 0x1 [ 0.586068] audit: initializing netlink socket (disabled) [ 0.586084] type=2000 audit(1370112030.580:1): initialized [ 0.606244] highmem bounce pool size: 64 pages [ 0.606250] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.606749] VFS: Disk quotas dquot_6.5.2 [ 0.606788] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.606869] msgmni has been set to 1735 [ 0.607056] alg: No test for stdrng (krng) [ 0.607087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.607092] io scheduler noop registered [ 0.607094] io scheduler deadline registered [ 0.607109] io scheduler cfq registered (default) [ 0.607227] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.607296] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.607432] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.607493] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.607624] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.607686] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.607818] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.607879] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.608029] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.608090] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.608250] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.608257] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.608283] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.608285] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.608291] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.608316] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.608322] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.608346] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.608352] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.608377] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.608383] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.608405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.608488] pciehp: Using ACPI for slot detection. [ 0.608527] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 17aa ss_did 20ad [ 0.608555] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.608571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.608573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.609004] intel_idle: does not run on family 6 model 15 [ 0.609033] ERST: Table is not found! [ 0.609035] GHES: HEST is not enabled! [ 0.609050] isapnp: Scanning for PnP cards... [ 0.963576] isapnp: No Plug & Play device found [ 0.963651] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.968171] serial 00:0a: [io 0x03f8-0x03ff] [ 0.968251] serial 00:0a: [irq 4] [ 0.968528] serial 00:0a: activated [ 0.989111] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.989383] Linux agpgart interface v0.103 [ 0.989525] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.989619] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.990794] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.990928] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.991120] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.998736] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.998744] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.998889] mousedev: PS/2 mouse device common for all mice [ 0.998947] rtc_cmos 00:07: RTC can wake from S4 [ 0.999082] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.999116] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.999127] cpuidle: using governor ladder [ 0.999129] cpuidle: using governor menu [ 0.999357] TCP cubic registered [ 0.999399] NET: Registered protocol family 10 [ 0.999922] Mobile IPv6 [ 0.999925] NET: Registered protocol family 17 [ 0.999929] Registering the dns_resolver key type [ 0.999950] Using IPI No-Shortcut mode [ 1.000081] PM: Hibernation image not present or could not be loaded. [ 1.000092] registered taskstats version 1 [ 1.000768] rtc_cmos 00:07: setting system clock to 2013-06-01 18:40:31 UTC (1370112031) [ 1.000834] Initializing network drop monitor service [ 1.000918] Freeing unused kernel memory: 416k freed [ 1.001092] Write protecting the kernel text: 2848k [ 1.001130] Write protecting the kernel read-only data: 1092k [ 1.001132] NX-protecting the kernel data: 3296k [ 1.003585] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.054127] udevd[52]: starting version 175 [ 1.075279] usbcore: registered new interface driver usbfs [ 1.075307] usbcore: registered new interface driver hub [ 1.089425] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.089428] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.089472] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.089604] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1.107204] usbcore: registered new device driver usb [ 1.107665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.112531] SCSI subsystem initialized [ 1.128680] uhci_hcd: USB Universal Host Controller Interface driver [ 1.136086] libata version 3.00 loaded. [ 1.137846] firewire_ohci 0000:15:00.1: setting latency timer to 64 [ 1.141317] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.141320] ACPI: Thermal Zone [THM0] (57 C) [ 1.142243] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.142246] ACPI: Thermal Zone [THM1] (58 C) [ 1.148943] sdhci: Secure Digital Host Controller Interface driver [ 1.148946] sdhci: Copyright(c) Pierre Ossman [ 1.200072] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.200260] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 1.201302] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.201309] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 1.201328] mmc0: no vmmc regulator found [ 1.202355] Registered led device: mmc0:: [ 1.204421] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.422346] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:37:8c:13:71 [ 1.422350] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.422449] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF [ 1.423036] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1.423043] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1.423064] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.423068] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.423095] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.427009] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.427027] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226400 [ 1.441665] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.441702] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.441705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.441708] usb usb1: Product: EHCI Host Controller [ 1.441710] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 1.441713] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.444453] hub 1-0:1.0: USB hub found [ 1.444459] hub 1-0:1.0: 4 ports detected [ 1.444557] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.444562] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.444571] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.444610] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.444646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.444649] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.444652] usb usb2: Product: UHCI Host Controller [ 1.444655] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 1.444657] usb usb2: SerialNumber: 0000:00:1a.0 [ 1.444769] hub 2-0:1.0: USB hub found [ 1.444774] hub 2-0:1.0: 2 ports detected [ 1.444854] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 1.444858] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 1.444869] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.444873] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.444881] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 1.444916] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.444950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.444953] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.444956] usb usb3: Product: UHCI Host Controller [ 1.444958] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 1.444960] usb usb3: SerialNumber: 0000:00:1a.1 [ 1.445144] hub 3-0:1.0: USB hub found [ 1.445149] hub 3-0:1.0: 2 ports detected [ 1.445225] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.445229] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.445241] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.445245] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.445253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.445290] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.445324] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.445327] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.445330] usb usb4: Product: UHCI Host Controller [ 1.445332] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 1.445334] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.445511] hub 4-0:1.0: USB hub found [ 1.445516] hub 4-0:1.0: 2 ports detected [ 1.445598] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.445602] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.445611] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.445637] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.445673] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.445676] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.445678] usb usb5: Product: UHCI Host Controller [ 1.445681] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 1.445683] usb usb5: SerialNumber: 0000:00:1d.1 [ 1.446451] hub 5-0:1.0: USB hub found [ 1.446456] hub 5-0:1.0: 2 ports detected [ 1.446536] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 1.446540] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 1.446551] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.446556] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.446565] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.446591] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.446625] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.446628] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.446631] usb usb6: Product: UHCI Host Controller [ 1.446634] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 1.446636] usb usb6: SerialNumber: 0000:00:1d.2 [ 1.447407] hub 6-0:1.0: USB hub found [ 1.447412] hub 6-0:1.0: 2 ports detected [ 1.447686] ata_piix 0000:00:1f.2: version 2.13 [ 1.447701] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.600032] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.600396] scsi0 : ata_piix [ 1.600492] scsi1 : ata_piix [ 1.601019] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c30 irq 14 [ 1.601023] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c38 irq 15 [ 1.601057] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.601064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.601089] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.601093] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.601104] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 1.601133] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.605013] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.605032] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe226800 [ 1.620021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.620039] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.620043] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.620045] usb usb7: Product: EHCI Host Controller [ 1.620048] usb usb7: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 1.620050] usb usb7: SerialNumber: 0000:00:1d.7 [ 1.620186] hub 7-0:1.0: USB hub found [ 1.620191] hub 7-0:1.0: 6 ports detected [ 1.704100] firewire_core: created device fw0: GUID 00061b032a1f03d5, S400 [ 1.764597] ata1.00: ATA-8: SAMSUNG HN-M101MBB, 2AR10001, max UDMA/133 [ 1.764601] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.764669] ata2.00: ATAPI: MATSHITADVD-RAM UJ-852, RB02, max UDMA/33 [ 1.772362] ata1.00: configured for UDMA/133 [ 1.772498] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HN-M101M 2AR1 PQ: 0 ANSI: 5 [ 1.780389] ata2.00: configured for UDMA/33 [ 1.782702] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852 RB02 PQ: 0 ANSI: 5 [ 1.787310] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.787367] sd 0:0:0:0: [sda] Write Protect is off [ 1.787370] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.787394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.816461] sda: sda1 sda2 sda3 [ 1.816845] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.818806] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.818898] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.819732] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.819735] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.819850] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.868027] usb 1-4: new high-speed USB device number 3 using ehci_hcd [ 2.000826] usb 1-4: New USB device found, idVendor=04b3, idProduct=4485 [ 2.000830] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.000990] hub 1-4:1.0: USB hub found [ 2.001073] hub 1-4:1.0: 4 ports detected [ 2.227711] device-mapper: uevent: version 1.0.3 [ 2.227856] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.240022] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 2.409652] usb 2-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 2.409656] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.409659] usb 2-1: Product: BCM2045B [ 2.409661] usb 2-1: Manufacturer: Broadcom Corp [ 2.484084] usb 1-4.2: new high-speed USB device number 4 using ehci_hcd [ 2.576329] usb 1-4.2: New USB device found, idVendor=0424, idProduct=2502 [ 2.576332] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.576623] hub 1-4.2:1.0: USB hub found [ 2.576701] hub 1-4.2:1.0: 2 ports detected [ 2.664081] usb 1-4.4: new low-speed USB device number 5 using ehci_hcd [ 2.777454] usb 1-4.4: New USB device found, idVendor=046d, idProduct=c046 [ 2.777458] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.777461] usb 1-4.4: Product: USB Optical Mouse [ 2.777463] usb 1-4.4: Manufacturer: Logitech [ 2.784806] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input1 [ 2.784892] generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-4.4/input0 [ 2.784908] usbcore: registered new interface driver usbhid [ 2.784910] usbhid: USB HID core driver [ 2.864084] usb 1-4.2.1: new high-speed USB device number 6 using ehci_hcd [ 2.956328] usb 1-4.2.1: New USB device found, idVendor=0424, idProduct=2602 [ 2.956332] usb 1-4.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.956493] hub 1-4.2.1:1.0: USB hub found [ 2.956578] hub 1-4.2.1:1.0: 4 ports detected [ 3.044083] usb 1-4.2.2: new high-speed USB device number 7 using ehci_hcd [ 3.136953] usb 1-4.2.2: New USB device found, idVendor=04f9, idProduct=002a [ 3.136956] usb 1-4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.136959] usb 1-4.2.2: Product: HL-5240 [ 3.136961] usb 1-4.2.2: Manufacturer: Brother [ 3.136963] usb 1-4.2.2: SerialNumber: L7J365005 [ 3.228079] usb 1-4.2.1.1: new high-speed USB device number 8 using ehci_hcd [ 3.406829] usb 1-4.2.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 3.406833] usb 1-4.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.406835] usb 1-4.2.1.1: Product: Flash Card Reader [ 3.406838] usb 1-4.2.1.1: Manufacturer: Generic [ 3.406840] usb 1-4.2.1.1: SerialNumber: 071031300789 [ 3.408990] usbcore: registered new interface driver uas [ 3.410059] Initializing USB Mass Storage driver... [ 3.410165] scsi2 : usb-storage 1-4.2.1.1:1.0 [ 3.410240] usbcore: registered new interface driver usb-storage [ 3.410242] USB Mass Storage support registered. [ 4.417731] scsi 2:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4.421104] scsi 2:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4.422083] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.422369] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 4.521960] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.525959] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 13.552072] kjournald starting. Commit interval 5 seconds [ 13.552306] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 15.870253] udevd[434]: starting version 175 [ 16.422738] wmi: Mapper loaded [ 16.455317] ACPI: AC Adapter [AC] (on-line) [ 16.479851] ACPI: Battery Slot [BAT0] (battery present) [ 16.547770] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 16.547952] ACPI: Lid Switch [LID] [ 16.548027] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 16.548032] ACPI: Sleep Button [SLPB] [ 16.548103] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 16.548107] ACPI: Power Button [PWRF] [ 16.735297] ACPI: Requesting acpi_cpufreq [ 16.738380] Monitor-Mwait will be used to enter C-1 state [ 16.738387] Monitor-Mwait will be used to enter C-2 state [ 16.738392] Monitor-Mwait will be used to enter C-3 state [ 16.738405] ACPI: acpi_idle registered with cpuidle [ 16.854473] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 17.112899] Non-volatile memory driver v1.3 [ 17.272438] cfg80211: Calling CRDA to update world regulatory domain [ 17.453325] iTCO_vendor_support: vendor-support=0 [ 17.454564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 17.454670] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 17.454844] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.591324] parport_pc 00:0b: reported by Plug and Play ACPI [ 17.591400] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 17.725209] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 17.829100] tpm_tis 00:0c: 1.2 TPM (device-id 0x3203, rev-id 9) [ 17.852720] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16 [ 17.852725] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 17.852731] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x7000-0xafff] [ 17.852734] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0xafff: excluding 0x7000-0x70ff 0x7400-0x74ff [ 17.875319] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff] [ 17.875322] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff: excluding 0xf8300000-0xf86cffff [ 17.875338] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref] [ 17.875341] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff: excluding 0xf4000000-0xf7ffffff [ 17.876839] r592 0000:15:00.4: setting latency timer to 64 [ 17.876919] r592: driver successfully loaded [ 18.040565] [drm] Initialized drm 1.1.0 20060810 [ 18.148300] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 18.148303] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 18.148368] iwl4965 0000:03:00.0: setting latency timer to 64 [ 18.148397] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 18.186972] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 18.187019] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 18.187116] iwl4965 0000:03:00.0: irq 46 for MSI/MSI-X [ 18.262441] Bluetooth: Core ver 2.16 [ 18.262462] NET: Registered protocol family 31 [ 18.262465] Bluetooth: HCI device and connection manager initialized [ 18.262468] Bluetooth: HCI socket layer initialized [ 18.262470] Bluetooth: L2CAP socket layer initialized [ 18.262476] Bluetooth: SCO socket layer initialized [ 18.274248] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 18.274250] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 18.274253] thinkpad_acpi: ThinkPad BIOS 7LETB0WW (2.10 ), EC 7KHT24WW-1.08 [ 18.274255] thinkpad_acpi: Lenovo ThinkPad T61, model 7659AB7 [ 18.274619] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 18.285879] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 18.285945] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 18.285981] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 18.304107] thinkpad_acpi: ACPI backlight control delay disabled [ 18.304309] thinkpad_acpi: radio switch found; radios are enabled [ 18.307027] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 18.307702] Registered led device: tpacpi::thinklight [ 18.307737] Registered led device: tpacpi::power [ 18.307761] Registered led device: tpacpi::standby [ 18.307785] Registered led device: tpacpi::thinkvantage [ 18.310225] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 18.310750] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 18.312627] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 18.432998] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0 [ 18.433006] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 18.472591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 18.620428] iwl4965 0000:03:00.0: firmware: agent loaded iwlwifi-4965-2.ucode into memory [ 18.620433] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24 [ 18.620680] Registered led device: phy0-led [ 18.642622] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 18.643475] usbcore: registered new interface driver btusb [ 18.654012] i915: disagrees about version of symbol intel_gtt_get [ 18.654016] i915: Unknown symbol intel_gtt_get (err -22) [ 18.678251] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 18.680068] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 18.680909] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.681561] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.682253] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 18.682289] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 18.682325] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 18.682359] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.734323] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 18.934212] r852 0000:15:00.5: setting latency timer to 64 [ 18.934275] r852: driver loaded successfully [ 19.017108] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 19.636804] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04F9 pid 0x002A [ 19.636823] usbcore: registered new interface driver usblp [ 21.805196] EXT3-fs (dm-0): using internal journal [ 22.505735] loop: module loaded [ 22.661750] thinkpad_ec: thinkpad_ec 0.41 loaded. [ 22.662790] tp_smapi 0.41 loading... [ 22.662924] tp_smapi successfully loaded (smapi_port=0xb2). [ 23.144054] kjournald starting. Commit interval 5 seconds [ 23.144251] EXT3-fs (sda2): using internal journal [ 23.144256] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 24.050735] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 24.276171] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 24.816747] RPC: Registered named UNIX socket transport module. [ 24.816750] RPC: Registered udp transport module. [ 24.816753] RPC: Registered tcp transport module. [ 24.816755] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 24.897292] FS-Cache: Loaded [ 24.936402] FS-Cache: Netfs 'nfs' registered for caching [ 24.956273] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 25.341447] fuse init (API version 7.17) [ 28.369091] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10 [ 30.388337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.388340] Bluetooth: BNEP filters: protocol multicast [ 30.389745] Bluetooth: RFCOMM TTY layer initialized [ 30.389749] Bluetooth: RFCOMM socket layer initialized [ 30.389752] Bluetooth: RFCOMM ver 1.11 [ 31.811653] lp0: using parport0 (interrupt-driven). [ 32.076326] ppdev: user-space parallel port driver [ 33.726255] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 33.780142] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 33.780385] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.021913] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.149546] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 36.149738] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.767041] wlan0: authenticate with 00:12:bf:bb:aa:6f (try 1) [ 39.768645] wlan0: authenticated [ 39.787666] wlan0: associate with 00:12:bf:bb:aa:6f (try 1) [ 39.792514] wlan0: RX AssocResp from 00:12:bf:bb:aa:6f (capab=0x471 status=0 aid=3) [ 39.792520] wlan0: associated [ 39.820112] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.628094] smapi smapi: set_real_thresh: set start to 79 for bat=0 [ 43.951631] i915: disagrees about version of symbol intel_gtt_get [ 43.951636] i915: Unknown symbol intel_gtt_get (err -22) [ 47.081580] i915: disagrees about version of symbol intel_gtt_get [ 47.081584] i915: Unknown symbol intel_gtt_get (err -22) [ 50.154212] i915: disagrees about version of symbol intel_gtt_get [ 50.154216] i915: Unknown symbol intel_gtt_get (err -22) [ 134.838606] i915: disagrees about version of symbol intel_gtt_get [ 134.838610] i915: Unknown symbol intel_gtt_get (err -22) [ 137.929498] i915: disagrees about version of symbol intel_gtt_get [ 137.929501] i915: Unknown symbol intel_gtt_get (err -22) [ 141.005603] i915: disagrees about version of symbol intel_gtt_get [ 141.005607] i915: Unknown symbol intel_gtt_get (err -22) [ 397.452667] i915: disagrees about version of symbol intel_gtt_get [ 397.452671] i915: Unknown symbol intel_gtt_get (err -22) [ 477.713491] i915: disagrees about version of symbol intel_gtt_get [ 477.713501] i915: Unknown symbol intel_gtt_get (err -22) [ 487.638003] i915: disagrees about version of symbol intel_gtt_get [ 487.638013] i915: Unknown symbol intel_gtt_get (err -22) [ 491.389714] i915: disagrees about version of symbol intel_gtt_get [ 491.389718] i915: Unknown symbol intel_gtt_get (err -22) ------ lspci Ouput ---------------------------- 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
--- End Message ---
--- Begin Message ---
- To: 710700-done@bugs.debian.org
- Subject: Re: Bug#710700: Kernel 3.2.0-4-686-pae: i915 module will not load.
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sat, 01 Jun 2013 19:07:16 +0100
- Message-id: <1370110036.3469.510.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] trinity-01fefa35-452e-45ad-bab3-3416e579f657-1370106745956@3capp-gmx-bs08>
- References: <[🔎] trinity-01fefa35-452e-45ad-bab3-3416e579f657-1370106745956@3capp-gmx-bs08>
On Sat, 2013-06-01 at 19:12 +0200, Melmi wrote: > Package: linux-image-3.2.0-4-686-pae > Version: 3.2.41-2 > > After doing an "apt-get upgrade" after a few month, xorg won't start. It says it's because the i915 module is not loading. > > When trying a manual "modprobe -v i915" it says: > ERROR: could not insert 'i915': Invalid argument > > Please find below output of dmesg and lspci. Please let me know if other information is needed. > > Best regards > Markus > > ----- DMESG Output ------ > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 [...] You are still running version 3.2.35-2. You need to reboot to complete the upgrade. Ben. -- Ben Hutchings If at first you don't succeed, you're doing about average.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---