[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#705345: linux-image-3.2.0-4-amd64: alx module crashes and requires reboot



Package: src:linux
Version: 3.2.41-2
Severity: critical
Justification: breaks the whole system

Dear Maintainer,

Periodically, the alx kernel driver crashes and requires a reboot to bring the interface back up.

Stack trace from `dmesg` from when this happens:

[174873.336429] alx 0000:02:00.0: eth0: error when reset mac
[175657.940856] ------------[ cut here ]------------
[175657.940867] WARNING: at /build/buildd-linux_3.2.39-2-amd64-G5_nN0/linux-3.2.39/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
[175657.940871] Hardware name: To be filled by O.E.M.
[175657.940874] NETDEV WATCHDOG: eth0 (alx): transmit queue 0 timed out
[175657.940876] Modules linked in: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc xfs loop snd_hda_codec_hdmi snd_hda_codec_realtek evdev coretemp crc32c_intel ghash_clmulni_intel pcspkr cryptd psmouse serio_raw i915 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm video i2c_i801 snd_page_alloc drm_kms_helper iTCO_wdt snd_timer drm iTCO_vendor_support snd soundcore i2c_algo_bit i2c_core acpi_cpufreq mperf button processor ext4 crc16 jbd2 mbcache raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq md_mod sg sd_mod crc_t10dif ata_generic ehci_hcd ata_piix fan thermal thermal_sys alx(C) xhci_hcd libata scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[175657.940933] Pid: 0, comm: swapper/0 Tainted: G         C   3.2.0-4-amd64 #1 Debian 3.2.39-2
[175657.940936] Call Trace:
[175657.940938]  <IRQ>  [<ffffffff81046a35>] ? warn_slowpath_common+0x78/0x8c
[175657.940948]  [<ffffffff81046ae1>] ? warn_slowpath_fmt+0x45/0x4a
[175657.940953]  [<ffffffff812a5cb1>] ? netif_tx_lock+0x40/0x75
[175657.940959]  [<ffffffff812a5e21>] ? dev_watchdog+0xf2/0x151
[175657.940963]  [<ffffffff810521d4>] ? run_timer_softirq+0x19a/0x261
[175657.940967]  [<ffffffff812a5d2f>] ? netif_tx_unlock+0x49/0x49
[175657.940973]  [<ffffffff81065ead>] ? timekeeping_get_ns+0xd/0x2a
[175657.940978]  [<ffffffff8104c060>] ? __do_softirq+0xb9/0x177
[175657.940982]  [<ffffffff81354bac>] ? call_softirq+0x1c/0x30
[175657.940987]  [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[175657.940991]  [<ffffffff8104c2c8>] ? irq_exit+0x3c/0x9a
[175657.940996]  [<ffffffff810241e0>] ? smp_apic_timer_interrupt+0x74/0x82
[175657.941000]  [<ffffffff8135341e>] ? apic_timer_interrupt+0x6e/0x80
[175657.941002]  <EOI>  [<ffffffff81023ea8>] ? lapic_next_event+0xe/0x13
[175657.941010]  [<ffffffff811ed2ed>] ? intel_idle+0xea/0x119
[175657.941013]  [<ffffffff811ed2cc>] ? intel_idle+0xc9/0x119
[175657.941018]  [<ffffffff8126edeb>] ? cpuidle_idle_call+0xec/0x179
[175657.941022]  [<ffffffff8100d243>] ? cpu_idle+0xa5/0xf2
[175657.941027]  [<ffffffff816abb38>] ? start_kernel+0x3b8/0x3c3
[175657.941031]  [<ffffffff816ab140>] ? early_idt_handlers+0x140/0x140
[175657.941035]  [<ffffffff816ab3c4>] ? x86_64_start_kernel+0x104/0x111
[175657.941038] ---[ end trace 58f0fed758729cc5 ]---
[175657.941691] alx 0000:02:00.0: eth0: error when reset mac
[177350.957296] alx 0000:02:00.0: eth0: error when reset mac
[179048.975222] alx 0000:02:00.0: eth0: error when reset mac

The last message is repeated periodically until I reboot the box.

I've tried removing and re-inserting the module, to no avail.

Regards,
Kim Tore Jensen


-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2

** Command line:
auto BOOT_IMAGE=Linux ro root=UUID=045ed463-dcd5-4132-b7d3-10bf720e27ce quiet

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[    2.851689]  sdd: sdd1
[    2.851883] sd 2:0:0:0: [sdd] Attached SCSI disk
[    2.867181]  sdc: sdc1
[    2.867435] sd 1:0:0:0: [sdc] Attached SCSI disk
[    2.873294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.873333] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.873366] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.873399] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    2.963457]  sda: sda1
[    2.980192]  sdb: sdb1
[    2.988770] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.988787] sd 0:0:1:0: [sdb] Attached SCSI disk
[    3.551146] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    3.842253] udevd[377]: starting version 175
[    3.870603] ACPI: Requesting acpi_cpufreq
[    3.879234] iTCO_vendor_support: vendor-support=0
[    3.880135] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    3.880229] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    3.882179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.882187] ACPI: Power Button [PWRB]
[    3.882252] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.882256] ACPI: Power Button [PWRF]
[    3.887287] [drm] Initialized drm 1.1.0 20060810
[    3.900980] ACPI: resource 0000:00:1f.3 [io  0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
[    3.900984] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.903735] i915 0000:00:02.0: setting latency timer to 64
[    3.927771] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    3.928738] Error: Driver 'pcspkr' is already registered, aborting...
[    3.951941] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    3.951945] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    3.952189] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    3.952194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.952195] [drm] Driver supports precise vblank timestamp query.
[    3.952228] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.996695] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.190501] No connectors reported connected with modes
[    4.190508] [drm] Cannot find any crtc or sizes - going 1024x768
[    4.195123] fbcon: inteldrmfb (fb0) is primary device
[    4.200902] Console: switching to colour frame buffer device 128x48
[    4.205489] fb0: inteldrmfb frame buffer device
[    4.205492] drm: registered panic notifier
[    4.263060] acpi device:4d: registered as cooling_device9
[    4.263351] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    4.263416] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.263438] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.263562] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    4.263599] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    4.818031] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[    4.818223] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    5.153969] md: md0 stopped.
[    5.156856] md: bind<sdb1>
[    5.158502] md: bind<sdc1>
[    5.158693] md: bind<sda1>
[    5.165530] async_tx: api initialized (async)
[    5.166076] xor: automatically using best checksumming function: generic_sse
[    5.185269]    generic_sse:  7038.000 MB/sec
[    5.185274] xor: using function: generic_sse (7038.000 MB/sec)
[    5.253189] raid6: int64x1   2777 MB/s
[    5.321117] raid6: int64x2   2670 MB/s
[    5.389026] raid6: int64x4   2527 MB/s
[    5.456955] raid6: int64x8   2060 MB/s
[    5.524870] raid6: sse2x1    6989 MB/s
[    5.592789] raid6: sse2x2    8617 MB/s
[    5.660711] raid6: sse2x4   10042 MB/s
[    5.660713] raid6: using algorithm sse2x4 (10042 MB/s)
[    5.665615] md: raid6 personality registered for level 6
[    5.665618] md: raid5 personality registered for level 5
[    5.665620] md: raid4 personality registered for level 4
[    5.665973] bio: create slab <bio-1> at 1
[    5.665991] md/raid:md0: device sda1 operational as raid disk 0
[    5.665994] md/raid:md0: device sdc1 operational as raid disk 2
[    5.665996] md/raid:md0: device sdb1 operational as raid disk 1
[    5.666298] md/raid:md0: allocated 3228kB
[    5.666330] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
[    5.666333] RAID conf printout:
[    5.666335]  --- level:5 rd:3 wd:3
[    5.666337]  disk 0, o:1, dev:sda1
[    5.666339]  disk 1, o:1, dev:sdb1
[    5.666341]  disk 2, o:1, dev:sdc1
[    5.666373] md0: detected capacity change from 0 to 4000526106624
[    5.713976]  md0: p1
[    6.158565] EXT4-fs (sdd1): re-mounted. Opts: (null)
[    6.206181] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro
[    6.238794] loop: module loaded
[    6.615283] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    6.615625] SGI XFS Quota Management subsystem
[    6.637351] XFS (md0p1): Mounting Filesystem
[    6.978422] XFS (md0p1): Ending clean mount
[    7.292109] RPC: Registered named UNIX socket transport module.
[    7.292115] RPC: Registered udp transport module.
[    7.292118] RPC: Registered tcp transport module.
[    7.292121] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.297568] FS-Cache: Loaded
[    7.306387] FS-Cache: Netfs 'nfs' registered for caching
[    7.311182] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.679120] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    7.680207] NFSD: starting 90-second grace period
[    7.954473] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.955407] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.469761] eth0: no IPv6 routers present

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z77-DS3H
board_version: x.x

** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xfs
loop
raid456
async_raid6_recov
async_memcpy
async_pq
raid6_pq
async_xor
xor
async_tx
md_mod
snd_hda_codec_hdmi
snd_hda_codec_realtek
coretemp
crc32c_intel
evdev
ghash_clmulni_intel
cryptd
pcspkr
psmouse
serio_raw
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
i915
i2c_i801
video
drm_kms_helper
drm
button
i2c_algo_bit
i2c_core
iTCO_wdt
acpi_cpufreq
iTCO_vendor_support
mperf
processor
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ata_generic
fan
thermal
thermal_sys
xhci_hcd
ata_piix
ehci_hcd
libata
scsi_mod
alx(C)
usbcore
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet static
    address 10.0.0.3
    netmask 255.255.255.0
    gateway 10.0.0.1
    up true

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 90:2b:34:57:8a:3a brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.3/24 brd 10.0.0.255 scope global eth0
    inet6 fe80::922b:34ff:fe57:8a3a/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:    5620      96    0    0    0     0          0         0     5620      96    0    0    0     0       0          0
  eth0: 6716022   72158    0    0    0     0          0         0 132125781  115685    0    0    0     0       1          0

*** Protocol statistics:
Ip:
    72216 total packets received
    0 forwarded
    0 incoming packets discarded
    72216 incoming packets delivered
    57369 requests sent out
    4 dropped because of missing route
Icmp:
    229 ICMP messages received
    61 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 224
        timeout in transit: 5
    730 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 730
IcmpMsg:
        InType3: 224
        InType11: 5
        OutType3: 730
Tcp:
    4442 active connections openings
    213 passive connection openings
    339 failed connection attempts
    65 connection resets received
    4 connections established
    70766 segments received
    107021 segments send out
    7744 segments retransmited
    4 bad segments received.
    43 resets sent
Udp:
    276 packets received
    730 packets to unknown port received.
    0 packet receive errors
    229 packets sent
UdpLite:
TcpExt:
    1 invalid SYN cookies received
    12 resets received for embryonic SYN_RECV sockets
    259 TCP sockets finished time wait in fast timer
    1 packets rejects in established connections because of timestamp
    777 delayed acks sent
    18 delayed acks further delayed because of locked socket
    Quick ack mode was activated 73 times
    2 packets directly queued to recvmsg prequeue.
    4730 packet headers predicted
    34520 acknowledgments not containing data payload received
    23314 predicted acknowledgments
    339 times recovered from packet loss by selective acknowledgements
    9 congestion windows recovered without slow start by DSACK
    115 congestion windows recovered without slow start after partial ack
    929 TCP data loss events
    TCPLostRetransmit: 6
    2 timeouts after SACK recovery
    908 fast retransmits
    2 forward retransmits
    1 retransmits in slow start
    1647 other TCP timeouts
    59 DSACKs sent for old packets
    19 DSACKs received
    28 connections reset due to early user close
    3 connections aborted due to timeout
    TCPDSACKIgnoredNoUndo: 8
    TCPSackShifted: 5373
    TCPSackMerged: 3009
    TCPSackShiftFallback: 843
    TCPChallengeACK: 4
    TCPSYNChallenge: 4
IpExt:
    InBcastPkts: 363
    OutBcastPkts: 55
    InOctets: 5715362
    OutOctets: 128137510
    InBcastOctets: 60644
    OutBcastOctets: 8348


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
	Subsystem: Giga-byte Technology Device [1458:5000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Giga-byte Technology Device [1458:d000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Giga-byte Technology Device [1458:5007]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Giga-byte Technology Device [1458:1c3a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f7d19000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Giga-byte Technology Device [1458:a002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f7c00000-f7cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7d16000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
	Subsystem: Giga-byte Technology Device [1458:5001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode] [8086:1e00] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Giga-byte Technology Device [1458:b005]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at f110 [size=8]
	Region 1: I/O ports at f100 [size=4]
	Region 2: I/O ports at f0f0 [size=8]
	Region 3: I/O ports at f0e0 [size=4]
	Region 4: I/O ports at f0d0 [size=16]
	Region 5: I/O ports at f0c0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Giga-byte Technology Device [1458:5001]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode] [8086:1e08] (rev 04) (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Device [1458:b002]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at f0b0 [size=8]
	Region 1: I/O ports at f0a0 [size=4]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f070 [size=16]
	Region 5: I/O ports at f060 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10)
	Subsystem: Giga-byte Technology Device [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at e000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: alx

03:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub


-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27
ii  lilo                    1:23.2-4
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:


Reply to: