Bug#703522: linux-image-3.2.0-0.bpo.4-rt-686-pae: Upgrading to 3.2.39-2~bpo60+1 fails with error (file mising)
Package: src:linux
Version: 3.2.35-2~bpo60+1
Severity: normal
I used linux-image-3.2.0-0.bpo.4-rt from a while.
I can not upgrading last updating with 3.2.39-2~bpo60+1.
Preparing to replace linux-image-3.2.0-0.bpo.4-rt-686-pae 3.2.35-2~bpo60+1 (using .../linux-image-3.2.0-0.bpo.4-rt-686-pae_3.2.39-2~bpo60+1_i386.deb) ...
Unpacking replacement linux-image-3.2.0-0.bpo.4-rt-686-pae ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae...
E: /usr/share/syslinux/themes/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-0.bpo.4-rt-686-pae.postrm line 212.
dpkg: warning: subprocess old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae...
E: /usr/share/syslinux/themes/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/tmp.ci/postrm line 212.
dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-0.bpo.4-rt-686-pae_3.2.39-2~bpo60+1_i386.deb (--unpack):
subprocess new post-removal script returned error exit status 1
configured to not write apport reports
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.2.0-0.bpo.4-rt-686-pae /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae...
E: /usr/share/syslinux/themes/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/tmp.ci/postrm line 212.
dpkg: error while cleaning up:
subprocess new post-removal script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/linux-image-3.2.0-0.bpo.4-rt-686-pae_3.2.39-2~bpo60+1_i386.deb
-- Package-specific info:
** Version:
Linux version 3.2.0-0.bpo.4-rt-686-pae (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT RT Debian 3.2.35-2~bpo60+1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae root=UUID=310f205d-4dfc-4293-966c-8b952c4d258b ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 7.043350] [TTM] Zone highmem: Available graphics memory: 516894 kiB.
[ 7.043355] [TTM] Initializing pool allocator.
[ 7.043474] [drm] radeon: 64M of VRAM memory ready
[ 7.043481] [drm] radeon: 64M of GTT memory ready.
[ 7.075549] radeon 0000:01:00.0: WB disabled
[ 7.081625] [drm] Loading R100 Microcode
[ 7.589839] platform radeon_cp.0: firmware: agent loaded radeon/R100_cp.bin into memory
[ 7.591115] [drm] radeon: ring at 0x00000000E0001000
[ 7.591142] [drm] ring test succeeded in 1 usecs
[ 7.591864] [drm] radeon: ib pool ready.
[ 7.594950] [drm] ib test succeeded in 0 usecs
[ 7.600431] [drm] Radeon Display Connectors
[ 7.600439] [drm] Connector 0:
[ 7.600443] [drm] VGA
[ 7.600449] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 7.600453] [drm] Encoders:
[ 7.600457] [drm] CRT1: INTERNAL_DAC1
[ 7.600461] [drm] Connector 1:
[ 7.600464] [drm] DVI-I
[ 7.600467] [drm] HPD1
[ 7.600472] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 7.600476] [drm] Encoders:
[ 7.600479] [drm] CRT2: INTERNAL_DAC2
[ 7.600483] [drm] DFP1: INTERNAL_TMDS1
[ 7.600486] [drm] Connector 2:
[ 7.600490] [drm] S-video
[ 7.600493] [drm] Encoders:
[ 7.600496] [drm] TV1: INTERNAL_DAC2
[ 7.751918] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:11.3/usb4/4-2/4-2:1.0/input/input5
[ 7.752658] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.3-2/input0
[ 7.753465] usbcore: registered new interface driver usbhid
[ 7.753472] usbhid: USB HID core driver
[ 7.867858] [drm] fb mappable at 0xD0040000
[ 7.867866] [drm] vram apper at 0xD0000000
[ 7.867870] [drm] size 3145728
[ 7.867874] [drm] fb depth is 24
[ 7.867878] [drm] pitch is 4096
[ 7.873297] fbcon: radeondrmfb (fb0) is primary device
[ 7.952271] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 8.030989] Console: switching to colour frame buffer device 128x48
[ 8.047557] fb0: radeondrmfb frame buffer device
[ 8.047562] drm: registered panic notifier
[ 8.047581] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 9.468957] Adding 1052252k swap on /dev/sda3. Priority:-1 extents:1 across:1052252k
[ 9.505724] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 10.080290] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 10.270962] loop: module loaded
[ 10.396765] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 10.397403] ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region HWMT [io 0x295-0x296]
[ 10.397410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.231965] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.355407] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.455703] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.557856] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 14.711284] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.793702] nf_conntrack version 0.5.0 (16152 buckets, 64608 max)
[ 15.020325] 8139too 0000:00:09.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 17.864612] RPC: Registered named UNIX socket transport module.
[ 17.864620] RPC: Registered udp transport module.
[ 17.864624] RPC: Registered tcp transport module.
[ 17.864628] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.947155] FS-Cache: Loaded
[ 18.018047] FS-Cache: Netfs 'nfs' registered for caching
[ 18.063921] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.840684] via-rhine 0000:00:08.0: eth0: link down
[ 19.841204] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.920030] eth1: no IPv6 routers present
[ 27.463173] lp0: using parport0 (interrupt-driven).
[ 27.734740] ppdev: user-space parallel port driver
[ 52.064719] sshd (3909): /proc/3909/oom_adj is deprecated, please use /proc/3909/oom_score_adj instead.
[ 53.985624] vboxdrv: Found 1 processor cores.
[ 53.997142] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 53.997153] vboxdrv: Successfully loaded version 4.0.18 (interface 0x00180000).
[ 6282.996035] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 6283.129371] usb 1-5: New USB device found, idVendor=04e8, idProduct=1f02
[ 6283.129380] usb 1-5: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[ 6283.129385] usb 1-5: Product: Samsung S2 Portable
[ 6283.129390] usb 1-5: Manufacturer: JMicron
[ 6283.129394] usb 1-5: SerialNumber: 0000002CE09310500A62
[ 6283.237693] Initializing USB Mass Storage driver...
[ 6283.238037] scsi5 : usb-storage 1-5:1.0
[ 6283.238321] usbcore: registered new interface driver usb-storage
[ 6283.238326] USB Mass Storage support registered.
[ 6284.252810] scsi 5:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
[ 6284.259757] sd 5:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 6284.259852] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 6284.260644] sd 5:0:0:0: [sdc] Write Protect is off
[ 6284.260652] sd 5:0:0:0: [sdc] Mode Sense: 3c 00 00 00
[ 6284.261507] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6284.287029] sdc: sdc1
[ 6284.294348] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 6285.630308] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 6629.670050] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6629.671335] SGI XFS Quota Management subsystem
[ 6629.691200] JFS: nTxBlock = 8076, nTxLock = 64611
[ 6629.745528] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 6629.804349] QNX4 filesystem 0.2.3 registered.
[ 6629.901920] Btrfs loaded
[ 6630.499100] fuse init (API version 7.17)
[ 6691.313380] usb 1-5: USB disconnect, device number 2
** Model information
not available
** Loaded modules:
fuse
btrfs
zlib_deflate
crc32c
libcrc32c
ufs
qnx4
hfsplus
hfs
minix
ntfs
msdos
jfs
xfs
reiserfs
ext3
jbd
ext2
nls_utf8
nls_cp437
vfat
fat
usb_storage
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
snd_hrtimer
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
ppdev
lp
xt_limit
xt_tcpudp
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
binfmt_misc
ipt_LOG
ipt_MASQUERADE
xt_DSCP
ipt_REJECT
nf_conntrack_irc
nf_conntrack_ftp
xt_state
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
iptable_mangle
iptable_filter
ip_tables
x_tables
hwmon_vid
loop
firewire_sbp2
snd_via82xx
gameport
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
usbhid
snd_mpu401_uart
hid
snd_seq_midi
snd_rawmidi
radeon
snd_seq_midi_event
ttm
drm_kms_helper
snd_seq
sg
drm
snd_timer
sr_mod
i2c_algo_bit
tpm_tis
tpm
snd_seq_device
ohci_hcd
uhci_hcd
i2c_viapro
ehci_hcd
tpm_bios
cdrom
i2c_core
floppy
processor
8139too
firewire_ohci
sata_promise
button
usbcore
power_supply
evdev
parport_pc
via_rhine
8139cp
firewire_core
snd
shpchp
pcspkr
thermal_sys
parport
usb_common
via_ircc
mii
irda
soundcore
crc_itu_t
crc_ccitt
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
ata_generic
pata_via
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfffe800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
00:06.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Packard Bell B.V. Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:06.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Packard Bell B.V. Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:06.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Packard Bell B.V. Device [1631:1600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at dfffe700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:07.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) [105a:3373] (rev 02)
Subsystem: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) [105a:3373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 576 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=64]
Region 1: I/O ports at e800 [size=16]
Region 2: I/O ports at e400 [size=128]
Region 3: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at dffc0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at dffe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sata_promise
00:08.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 86)
Subsystem: VIA Technologies, Inc. VT6106S [Rhine-III] [1106:0105]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at dfffe600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at dfffe500 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 8139too
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 10)
Subsystem: Avance Logic Inc. MSI K7T266 Pro2-RU (MSI-6380 v2) onboard audio (Realtek/ALC 200/200P) [4005:4710]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_via82xx
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited RV100 QY [Sapphire Radeon VE 7000] [174b:7112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 8800 [size=256]
Region 2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-0.bpo.4-rt-686-pae (SMP w/1 CPU core; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-0.bpo.4-rt-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii dracut [linux-initramfs-too 005-1 modular, event-driven initramfs in
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-0.bpo.4-rt-686-pae recommends:
ii firmware-linux-free 2.6.32-48squeeze1 Binary firmware for various driver
ii libc6-i686 2.11.3-4 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.2.0-0.bpo.4-rt-686-pae suggests:
pn debian-kernel- <none> (no description available)
ii extlinux 2:4.05+dfsg-2~bpo60+1 collection of boot loaders (ext2/3
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-0.bpo.4-rt-686-pae is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwima <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.36+wheezy.1~bpo60+1 Binary firmware for various driver
ii firmware-linux-non 0.36+wheezy.1~bpo60+1 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.36+wheezy.1~bpo60+1 Binary firmware for Ralink wireles
ii firmware-realtek 0.36+wheezy.1~bpo60+1 Binary firmware for Realtek wired
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-0.bpo.4-rt-686-pae/postinst/missing-firmware-3.2.0-0.bpo.4-rt-686-pae:
linux-image-3.2.0-0.bpo.4-rt-686-pae/prerm/removing-running-kernel-3.2.0-0.bpo.4-rt-686-pae: true
linux-image-3.2.0-0.bpo.4-rt-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-0.bpo.4-rt-686-pae/postinst/depmod-error-initrd-3.2.0-0.bpo.4-rt-686-pae: false
Reply to: