Bug#703464: Acer Aspire 3810T laptop hotkeys produce ACPI exceptions & errors in dmesg log
Package: src:linux
Version: 3.2.35-2
Severity: minor
Dear Maintainer,
my Acer Aspire 3810T laptop hotkeys (+) seem to function good,
but when pressed, they produce some kernel log messages like this:
ACPI Exception: AE_AML_PACKAGE_LIMIT ...
ACPI Error: Method parse/execution failed ...
(look at the tail of kernel log for more details).
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=... ro
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 26.980943] sirdev_receive - too early: ffff880137c5cc9a / 1!
[ 26.983009] sirdev_receive - too early: (null) / 0!
[ 26.985038] sirdev_receive - too early: (null) / 0!
[ 26.986954] sirdev_receive - too early: (null) / 0!
[ 26.988814] sirdev_receive - too early: ffff880137c5cca0 / 3!
[ 30.866958] Bluetooth: Core ver 2.16
[ 30.868926] NET: Registered protocol family 31
[ 30.870804] Bluetooth: HCI device and connection manager initialized
[ 30.872718] Bluetooth: HCI socket layer initialized
[ 30.874569] Bluetooth: L2CAP socket layer initialized
[ 30.876418] Bluetooth: SCO socket layer initialized
[ 30.913041] Bluetooth: RFCOMM TTY layer initialized
[ 30.914885] Bluetooth: RFCOMM socket layer initialized
[ 30.916718] Bluetooth: RFCOMM ver 1.11
[ 30.993990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.995787] Bluetooth: BNEP filters: protocol multicast
[ 31.349671] lp: driver loaded but no devices found
[ 31.508076] ppdev: user-space parallel port driver
[ 32.069922] vboxdrv: Found 2 processor cores.
[ 32.070107] vboxdrv: fAsync=0 offMin=0x193 offMax=0x7f2
[ 32.072252] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 32.074179] vboxdrv: Successfully loaded version 4.2.6 (interface 0x001a0004).
[ 33.315332] vboxpci: IOMMU not found (not registered)
[ 34.425477] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 34.428979] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 34.545166] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 34.548269] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 34.596618] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.661449] atl1c 0000:02:00.0: irq 46 for MSI/MSI-X
[ 34.721214] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 124.688338] NOHZ: local_softirq_pending 08
[ 124.775098] NOHZ: local_softirq_pending 08
[ 124.863335] NOHZ: local_softirq_pending 08
[ 124.951332] NOHZ: local_softirq_pending 08
[ 125.039335] NOHZ: local_softirq_pending 08
[ 125.127331] NOHZ: local_softirq_pending 08
[ 125.217306] NOHZ: local_softirq_pending 08
[ 127.696324] NOHZ: local_softirq_pending 08
[ 127.783319] NOHZ: local_softirq_pending 08
[ 127.871315] NOHZ: local_softirq_pending 08
[ 131.181869] wlan0: authenticate with 11:22:33:44:55:66 (try 1)
[ 131.380294] wlan0: authenticate with 11:22:33:44:55:66 (try 2)
[ 131.382478] wlan0: authenticated
[ 131.387612] wlan0: associate with 11:22:33:44:55:66 (try 1)
[ 131.584299] wlan0: associate with 11:22:33:44:55:66 (try 2)
[ 131.587891] wlan0: RX AssocResp from 11:22:33:44:55:66 (capab=0x431 status=0 aid=1)
[ 131.587901] wlan0: associated
[ 131.597601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 142.800247] wlan0: no IPv6 routers present
[ 647.844458] cfg80211: Calling CRDA to update world regulatory domain
[ 647.855260] cfg80211: World regulatory domain updated:
[ 647.855360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 647.855490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 647.855614] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 647.855737] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 647.855863] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 647.855986] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 906.511841] iwlwifi 0000:01:00.0: RF_KILL bit toggled to disable radio.
[ 906.536288] iwlwifi 0000:01:00.0: Not sending command - RF KILL
[ 906.543432] iwlwifi 0000:01:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 906.550410] iwlwifi 0000:01:00.0: Error clearing ASSOC_MSK on BSS (-5)
[ 907.044350] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 907.808281] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 907.818516] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 907.878203] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 992.113239] wlan0: authenticate with 11:22:33:44:55:66 (try 1)
[ 992.115141] wlan0: authenticated
[ 992.119297] wlan0: associate with 11:22:33:44:55:66 (try 1)
[ 992.123115] wlan0: RX AssocResp from 11:22:33:44:55:66 (capab=0x431 status=0 aid=1)
[ 992.123124] wlan0: associated
[ 992.129305] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1003.024127] wlan0: no IPv6 routers present
[ 1727.033517] fuse init (API version 7.17)
[ 1767.558259] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 1767.558293] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 1767.558318] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 1767.774982] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 1767.775003] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 1767.775019] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 3954.145078] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 3954.145113] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 3954.145139] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4631.767985] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 4631.768056] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4631.768094] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.453681] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 4636.453718] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.453745] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.559850] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 4636.559871] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.559886] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.666683] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 4636.666719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4636.666745] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4692.273605] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 4692.273641] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 4692.273667] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 5029.085887] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 5029.085922] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 5029.085947] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
** Model information
sys_vendor: Acer
product_name: Aspire 3810T
product_version: V1.28
chassis_vendor: Acer
chassis_version: None
bios_vendor: Acer
bios_version: V1.28
board_vendor: Acer
board_name: Aspire 3810T
board_version: PSMBOU-1234567
** Loaded modules:
fuse
cryptd
aes_x86_64
aes_generic
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
snd_hrtimer
ma600_sir
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
irtty_sir
sir_dev
irda
crc_ccitt
binfmt_misc
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
kvm_intel
kvm
uvcvideo
videodev
v4l2_compat_ioctl32
pl2303
media
usbserial
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
arc4
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
iwlwifi
snd_seq_midi_event
snd_rawmidi
acer_wmi
snd_seq
joydev
i915
mac80211
sparse_keymap
cfg80211
snd_seq_device
snd_timer
drm_kms_helper
drm
rfkill
snd
i2c_algo_bit
i2c_i801
acpi_cpufreq
mperf
i2c_core
iTCO_wdt
ac
processor
psmouse
pcspkr
battery
serio_raw
evdev
power_supply
button
video
soundcore
coretemp
iTCO_vendor_support
wmi
ext4
crc16
jbd2
mbcache
microcode
sg
sd_mod
crc_t10dif
ahci
libahci
libata
uhci_hcd
thermal
thermal_sys
ehci_hcd
atl1c
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at e4505c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e3500000-e44fffff
Prefetchable memory behind bridge: 00000000e0400000-00000000e13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2500000-e34fffff
Prefetchable memory behind bridge: 00000000e1400000-00000000e23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 30a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e4505800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 3108 [size=8]
Region 1: I/O ports at 311c [size=4]
Region 2: I/O ports at 3100 [size=8]
Region 3: I/O ports at 3118 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at e4505000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4506000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e4504000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 ABG [8086:1306]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e3500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e2500000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 1000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 064e:a133 Suyin Corp.
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 2:4.05+dfsg-6+deb7u1
ii grub-pc 1.99-27
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
----
Best wishes, Bob
Reply to: