Bug#702885: linux-image-3.8-trunk-amd64: Samsung NP900X3C display does not resume from suspend
Package: src:linux
Version: 3.8.2-1~experimental.1
Severity: important
Since upgrading to kernel 3.8.2-1~experimental.1 my Samsung NP900X3C
freezes when I try to resume from sleep/suspend. I noticed that the caps
lock key was usually still working (however, on one occasion it wasn't,
so I presume the machine had totally locked), so I tried ssh'ing in and
discovered I could recover it by restarting gdm3.
I realise the ability to restart X makes it look more like a userland
bug, and that these Samsung Ultrabook/laptops are notorious for broken
ACPI behaviour, but this problem seems to be specific to kernel 3.8. On
downgrading to 3.2.39-2 or 3.7.8-1~experimental.1 the problem goes away.
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.2-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64 root=UUID=051093c4-6567-4984-a8ea-3ffbd736402f ro elevator=noop quiet
** Not tainted
** Kernel log:
[ 139.684324] r8169 0000:02:00.0: System wakeup disabled by ACPI
[ 139.685734] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 139.907624] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 140.002530] btusb 1-1.5:1.0: no reset_resume for driver btusb?
[ 140.002532] btusb 1-1.5:1.1: no reset_resume for driver btusb?
[ 140.003339] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 140.005747] ata1.00: configured for UDMA/133
[ 140.019452] sd 0:0:0:0: [sda] Starting disk
[ 140.071498] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[ 140.755475] PM: resume of devices complete after 1072.659 msecs
[ 140.755915] PM: Finishing wakeup.
[ 140.755917] Restarting tasks ... done.
[ 140.763229] video LNXVIDEO:00: Restoring backlight state
[ 141.009715] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 141.016387] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 141.250245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 141.367794] r8169 0000:02:00.0 eth0: link down
[ 141.367853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 141.653851] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 147.811872] wlan0: authenticate with 00:24:b2:49:13:e4
[ 147.819039] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 147.820021] wlan0: send auth to 00:24:b2:49:13:e4 (try 1/3)
[ 147.822302] wlan0: authenticated
[ 147.826000] wlan0: associate with 00:24:b2:49:13:e4 (try 1/3)
[ 147.830257] wlan0: RX AssocResp from 00:24:b2:49:13:e4 (capab=0x411 status=0 aid=4)
[ 147.853269] wlan0: associated
[ 147.853379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 317.899938] wlan0: deauthenticating from 00:24:b2:49:13:e4 by local choice (reason=3)
[ 317.929155] cfg80211: Calling CRDA to update world regulatory domain
[ 317.934752] cfg80211: World regulatory domain updated:
[ 317.934756] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 317.934759] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 317.934761] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 317.934762] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 317.934764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 317.934765] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 319.004721] PM: Syncing filesystems ... done.
[ 319.005229] PM: Preparing system for mem sleep
[ 319.042057] (NULL device *): firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory
[ 319.042267] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 319.057512] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 319.073476] PM: Entering mem sleep
[ 319.073526] Suspending console(s) (use no_console_suspend to debug)
[ 319.073747] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 319.073823] sd 0:0:0:0: [sda] Stopping disk
[ 320.192089] PM: suspend of devices complete after 1119.799 msecs
[ 320.192220] PM: late suspend of devices complete after 0.129 msecs
[ 320.208381] r8169 0000:02:00.0: System wakeup enabled by ACPI
[ 320.271968] PM: noirq suspend of devices complete after 79.840 msecs
[ 320.272190] ACPI: Preparing to enter system sleep state S3
[ 320.296039] PM: Saving platform NVS memory
[ 320.298301] Disabling non-boot CPUs ...
[ 320.300133] smpboot: CPU 1 is now offline
[ 320.403741] smpboot: CPU 2 is now offline
[ 320.405630] smpboot: CPU 3 is now offline
[ 320.405975] Extended CMOS year: 2000
[ 320.407237] ACPI: Low-level resume complete
[ 320.407285] PM: Restoring platform NVS memory
[ 320.407672] Extended CMOS year: 2000
[ 320.407741] Enabling non-boot CPUs ...
[ 320.407900] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 320.421951] CPU1 is up
[ 320.422088] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 320.436118] CPU2 is up
[ 320.436274] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 320.450496] CPU3 is up
[ 320.454845] ACPI: Waking up from system sleep state S3
[ 320.629447] PM: noirq resume of devices complete after 128.142 msecs
[ 320.629586] PM: early resume of devices complete after 0.093 msecs
[ 320.629621] i915 0000:00:02.0: setting latency timer to 64
[ 320.629674] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 320.629733] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 320.629761] ahci 0000:00:1f.2: setting latency timer to 64
[ 320.629771] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 320.629864] r8169 0000:02:00.0: System wakeup disabled by ACPI
[ 320.853196] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 320.947977] btusb 1-1.5:1.0: no reset_resume for driver btusb?
[ 320.947979] btusb 1-1.5:1.1: no reset_resume for driver btusb?
[ 320.948838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 320.950961] ata1.00: configured for UDMA/133
[ 320.964942] sd 0:0:0:0: [sda] Starting disk
[ 321.016991] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[ 321.700959] PM: resume of devices complete after 1072.648 msecs
[ 321.701428] PM: Finishing wakeup.
[ 321.701429] Restarting tasks ... done.
[ 321.710097] video LNXVIDEO:00: Restoring backlight state
[ 321.938401] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 321.945045] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 322.175698] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 322.289274] r8169 0000:02:00.0 eth0: link down
[ 322.289358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 322.427504] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 328.782491] wlan0: authenticate with 00:24:b2:49:13:e4
[ 328.789724] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 328.790664] wlan0: send auth to 00:24:b2:49:13:e4 (try 1/3)
[ 328.792895] wlan0: authenticated
[ 328.795483] wlan0: associate with 00:24:b2:49:13:e4 (try 1/3)
[ 328.799686] wlan0: RX AssocResp from 00:24:b2:49:13:e4 (capab=0x411 status=0 aid=4)
[ 328.823489] wlan0: associated
[ 328.823615] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 900X3C/900X4C/900X4D
product_version: 0.1
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: 0.1
bios_vendor: Phoenix Technologies Ltd.
bios_version: P01AAC
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: SAMSUNG_NP1234567890
board_version: FAB1
** Loaded modules:
hidp
hid
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
snd_hda_codec_hdmi
snd_hda_codec_realtek
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
joydev
coretemp
kvm_intel
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
arc4
iTCO_wdt
iTCO_vendor_support
evdev
iwldvm
mac80211
samsung_laptop
microcode
battery
psmouse
snd_hda_intel
iwlwifi
snd_hda_codec
i915
serio_raw
snd_hwdep
snd_pcm
snd_page_alloc
video
snd_seq
drm_kms_helper
snd_seq_device
drm
btusb
snd_timer
pcspkr
acpi_cpufreq
bluetooth
cfg80211
ac
mperf
i2c_i801
lpc_ich
i2c_algo_bit
snd
mfd_core
i2c_core
mei
rfkill
processor
button
soundcore
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
r8169
mii
fan
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
ehci_pci
xhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether e8:03:9a:b7:de:92 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether c4:85:08:34:26:5f brd ff:ff:ff:ff:ff:ff
inet 192.168.0.12/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::c685:8ff:fe34:265f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 1760 28 0 0 0 0 0 0 1760 28 0 0 0 0 0 0
wlan0: 2362865 1864 0 0 0 0 0 0 181917 1341 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1915 total packets received
0 forwarded
0 incoming packets discarded
1884 incoming packets delivered
1292 requests sent out
2 dropped because of missing route
Icmp:
17 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 17
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 17
OutType3: 8
Tcp:
15 active connections openings
2 passive connection openings
6 failed connection attempts
0 connection resets received
1 connections established
1761 segments received
1159 segments send out
18 segments retransmited
0 bad segments received.
6 resets sent
Udp:
98 packets received
8 packets to unknown port received.
0 packet receive errors
101 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
1 TCP sockets finished time wait in fast timer
17 delayed acks sent
4 packets directly queued to recvmsg prequeue.
1368 packet headers predicted
46 acknowledgments not containing data payload received
93 predicted acknowledgments
18 retransmits in slow start
8 packets collapsed in receive queue due to low socket buffer
TCPRcvCoalesce: 136
TCPOFOQueue: 136
IpExt:
InNoRoutes: 3
InMcastPkts: 58
OutMcastPkts: 64
InBcastPkts: 17
InOctets: 2347354
OutOctets: 125546
InMcastOctets: 10855
OutMcastOctets: 11035
InBcastOctets: 4043
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0705000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC Controller [8086:1e5d] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f0708000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Renesas Technology Corp. Device [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07da Intel Corp.
Bus 001 Device 004: ID 2232:1024
-- System Information:
Debian Release: 7.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.110
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.8-trunk-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-trunk-amd64/prerm/removing-running-kernel-3.8-trunk-amd64: true
linux-image-3.8-trunk-amd64/postinst/depmod-error-initrd-3.8-trunk-amd64: false
* linux-image-3.8-trunk-amd64/postinst/missing-firmware-3.8-trunk-amd64:
linux-image-3.8-trunk-amd64/postinst/ignoring-ramdisk:
Reply to: