Bug#702668: not possible to select screen left of other screen, only clone mode is possible
Package: src:linux
Version: 3.2.35-2
Severity: normal
It is not possible to select a screen right or left of other screen, only clone
mode is possible (gnome-control-center display). With linux-image-3.2.0-3-amd64
this works perfect.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/volume_group_1-root_2 ro splash vga=795 quiet
** Not tainted
** Kernel log:
[ 6.063718] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.063725] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.063730] usb usb7: Product: UHCI Host Controller
[ 6.063735] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 6.063740] usb usb7: SerialNumber: 0000:00:10.2
[ 6.065381] hub 7-0:1.0: USB hub found
[ 6.065399] hub 7-0:1.0: 2 ports detected
[ 6.065629] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 6.065650] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
[ 6.065697] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
[ 6.065802] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.065809] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.065815] usb usb8: Product: UHCI Host Controller
[ 6.065820] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 6.065825] usb usb8: SerialNumber: 0000:00:10.3
[ 6.071252] hub 8-0:1.0: USB hub found
[ 6.071272] hub 8-0:1.0: 2 ports detected
[ 6.277582] [drm] radeon kernel modesetting disabled; it requires firmware-linux-nonfree.
[ 6.278772] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.278781] [drm] No driver support for vblank timestamp query.
[ 6.278789] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 6.340224] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 6.340236] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.341567] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.346620] sr1: scsi3-mmc drive: 126x/52x cd/rw xa/form2 cdda tray
[ 6.347602] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 6.416058] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 6.486261] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.486360] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 6.486450] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 6.549392] usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
[ 6.549402] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.549408] usb 2-4: Product: USB2.0 Hub
[ 6.549984] hub 2-4:1.0: USB hub found
[ 6.550262] hub 2-4:1.0: 4 ports detected
[ 6.756041] hub 2-0:1.0: over-current condition on port 5
[ 6.819637] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 6.964049] hub 2-0:1.0: over-current condition on port 6
[ 7.204109] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 7.379610] usb 5-1: New USB device found, idVendor=046d, idProduct=c058
[ 7.379617] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.379622] usb 5-1: Product: USB Optical Mouse
[ 7.379625] usb 5-1: Manufacturer: Logitech
[ 7.576038] snd_via82xx_modem 0000:00:11.6: setting latency timer to 64
[ 8.080313] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
[ 8.081991] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 8.357159] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/input/input5
[ 8.357576] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0
[ 8.358046] usbcore: registered new interface driver usbhid
[ 8.358051] usbhid: USB HID core driver
[ 8.595911] codec_read: codec 0 is not valid [0xfe0000]
[ 8.604186] codec_read: codec 0 is not valid [0xfe0000]
[ 8.612521] codec_read: codec 0 is not valid [0xfe0000]
[ 8.620803] codec_read: codec 0 is not valid [0xfe0000]
[ 12.061512] Adding 489932k swap on /dev/sda9. Priority:-1 extents:1 across:489932k
[ 12.093577] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 12.656840] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 12.848672] loop: module loaded
[ 15.719459] EXT4-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[ 15.719812] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 15.835983] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 15.941579] EXT4-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended
[ 15.948736] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: user_xattr
[ 16.042058] kjournald starting. Commit interval 5 seconds
[ 16.042326] EXT3-fs (dm-3): using internal journal
[ 16.042337] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 16.134559] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 16.242840] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.367192] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 16.498808] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 17.583871] skge 0000:00:0a.0: eth0: enabling interface
[ 19.271313] skge 0000:00:0a.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 24.106186] RPC: Registered named UNIX socket transport module.
[ 24.106196] RPC: Registered udp transport module.
[ 24.106200] RPC: Registered tcp transport module.
[ 24.106205] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.158828] FS-Cache: Loaded
[ 24.234942] FS-Cache: Netfs 'nfs' registered for caching
[ 24.270645] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 31.122854] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[ 31.122888] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 31.122989] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 31.425620] [drm] Setting GART location based on new memory map
[ 31.425750] [drm] Loading R300 Microcode
[ 31.455633] platform radeon_cp.0: firmware: agent aborted loading radeon/R300_cp.bin (not found?)
[ 31.456061] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 33.689782] Bluetooth: Core ver 2.16
[ 33.689832] NET: Registered protocol family 31
[ 33.689837] Bluetooth: HCI device and connection manager initialized
[ 33.689845] Bluetooth: HCI socket layer initialized
[ 33.689850] Bluetooth: L2CAP socket layer initialized
[ 33.690220] Bluetooth: SCO socket layer initialized
[ 33.797613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.797622] Bluetooth: BNEP filters: protocol multicast
[ 33.817952] Bluetooth: RFCOMM TTY layer initialized
[ 33.817965] Bluetooth: RFCOMM socket layer initialized
[ 33.817970] Bluetooth: RFCOMM ver 1.11
[ 35.164361] lp: driver loaded but no devices found
[ 35.339988] ppdev: user-space parallel port driver
[ 106.903807] fuse init (API version 7.17)
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1007.001
board_vendor: ASUSTeK Computer Inc.
board_name: K8VB
board_version: Rev 1.xx
** Loaded modules:
fuse
parport_pc
ppdev
lp
parport
rfcomm
bnep
bluetooth
rfkill
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
loop
usbhid
hid
snd_via82xx
snd_mpu401_uart
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_via82xx_modem
snd_ac97_codec
snd_pcm
sg
snd_page_alloc
sr_mod
cdrom
snd_seq
ata_generic
radeon
ttm
drm_kms_helper
uhci_hcd
ehci_hcd
usbcore
drm
amd64_edac_mod
snd_seq_device
snd_timer
pata_via
snd
gameport
power_supply
edac_mce_amd
i2c_algo_bit
edac_core
soundcore
k8temp
powernow_k8
skge
ac97_bus
shpchp
usb_common
evdev
pcspkr
mperf
i2c_viapro
i2c_core
processor
button
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
microcode
sd_mod
crc_t10dif
sata_via
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge [1106:3188] (rev 01)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/K8V-X motherboard [1043:80a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at <ignored> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd100000-fd6fffff
Prefetchable memory behind bridge: b5000000-f4ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:09.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:09.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 62) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdd00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0a.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdc00000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at c000 [size=256]
Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at b000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fd800000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX]) [1043:80b0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at dc00 [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_via82xx
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 1000 [size=256]
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV350 AQ [Radeon 9600] [1002:4151] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A9600SE [1043:c004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at fd600000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fd500000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: Advanced Micro Devices [AMD] nee ATI RV350 AQ [Radeon 9600] (Secondary) [1002:4171]
Subsystem: ASUSTeK Computer Inc. A9600SE (Secondary) [1043:c005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fd400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 005 Device 002: ID 046d:c058 Logitech, Inc. M115 Mouse
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27
ii lilo 1:23.2-4
ii linux-doc-3.2 3.2.35-2
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: