A colleague just helped me get serial console-enabled boot logs from the same thinkcentre m78 reported in http://bugs.debian.org/701054. We booted the machine with "verbose console=ttyS0,115200n8" on each of three different debian-packaged kernels: 3.2.0-4-686-pae 3.7-trunk-686-pae 3.8-trunk-686-pae We were *not* blacklisting any kernel modules. Attached is the serial log that covers each of those three boots. just after the disk detection completes, some part of the boot process hangs, and needs a "ctrl+C" to continue -- you can see this, for example, in the gap between 6.97299 and 171.020358 on the first boot (3.2.0-4-686-pae). If we blacklist the snd_hda_* modules, then this hang doesn't happen (but of course no audio card is available either). Of particular interest between the three boots is: * all three boots: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored * just 3.2: [ 1.676960] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [ 1.690776] [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [ 1.700255] Failed to setup IBS, -22 * various hda-intel weirdnesses. please let me know if there are other diagnostics we can run with any of these kernels, or if you'd like me to try anything different. --dkg
[H[J Booting a command list
Loading Linux 3.2.0-4-686-pae ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ada18000 (usable)
[ 0.000000] BIOS-e820: 00000000ada18000 - 00000000adcf8000 (reserved)
[ 0.000000] BIOS-e820: 00000000adcf8000 - 00000000add03000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000add03000 - 00000000ae929000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae929000 - 00000000aee92000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee92000 - 00000000aee93000 (usable)
[ 0.000000] BIOS-e820: 00000000aee93000 - 00000000af099000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000af099000 - 00000000af4c0000 (usable)
[ 0.000000] BIOS-e820: 00000000af4c0000 - 00000000af7f2000 (reserved)
[ 0.000000] BIOS-e820: 00000000af7f2000 - 00000000af800000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100001000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fd870] fd870
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] RAMDISK: 3717f000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 3630e000 - 3717e266
[ 0.000000] Move RAMDISK from 000000003717f000 - 0000000037fef265 to 3630e000 - 3717e265
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT adcfa080 00084 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FACP add00b40 0010C (v05 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT adcfa198 069A2 (v02 LENOVO TC-9Z 00001210 INTL 20051117)
[ 0.000000] ACPI: FACS ae920080 00040
[ 0.000000] ACPI: APIC add00c50 00072 (v03 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FPDT add00cc8 00044 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: TCPA add00d10 00032 (v02 LENOVO TC-9Z 00001210 MSFT 01000013)
[ 0.000000] ACPI: MCFG add00d48 0003C (v01 LENOVO TC-9Z 00001210 MSFT 00010013)
[ 0.000000] ACPI: SLIC add00d88 00176 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: BGRT add00f00 00038 (v00 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: SSDT add00f38 00C04 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: SSDT add01b40 004B7 (v02 LENOVO TC-9Z 00001210 MSFT 04000000)
[ 0.000000] ACPI: IVRS add01ff8 00070 (v02 LENOVO TC-9Z 00001210 AMD 00000000)
[ 0.000000] ACPI: CRAT add02068 002A8 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: HPET add02310 00038 (v01 LENOVO TC-9Z 00001210 AMI 00000005)
[ 0.000000] 3974MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000ada18
[ 0.000000] 0: 0x000aee92 -> 0x000aee93
[ 0.000000] 0: 0x000af099 -> 0x000af4c0
[ 0.000000] 0: 0x000af7f2 -> 0x000af800
[ 0.000000] 0: 0x00100001 -> 0x00130000
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at af800000 (gap: af800000:4f400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33280 r0 d24064 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 899034
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/krazy-root ro verbose console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:00130000)
[ 0.000000] Memory: 3575020k/4980736k available (2845k kernel code, 60032k reserved, 1353k data, 416k init, 2724156k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c7484 - 0xc1419a80 (1353 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c7484 (2845 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3193.999 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.99 BogoMIPS (lpj=12775996)
[ 0.014879] pid_max: default: 32768 minimum: 301
[ 0.016026] Security Framework initialized
[ 0.020005] AppArmor: AppArmor disabled by boot time parameter
[ 0.024013] Mount-cache hash table entries: 512
[ 0.028077] Initializing cgroup subsys cpuacct
[ 0.032006] Initializing cgroup subsys memory
[ 0.036008] Initializing cgroup subsys devices
[ 0.040004] Initializing cgroup subsys freezer
[ 0.044004] Initializing cgroup subsys net_cls
[ 0.048004] Initializing cgroup subsys blkio
[ 0.052007] Initializing cgroup subsys perf_event
[ 0.056022] CPU: Physical Processor ID: 0
[ 0.060005] CPU: Processor Core ID: 0
[ 0.064006] mce: CPU supports 7 MCE banks
[ 0.068285] ACPI: Core revision 20110623
[ 0.084011] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.088309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.135415] CPU0: AMD A8-5500B APU with Radeon(tm) HD Graphics stepping 01
[ 0.144008] Performance Events: AMD Family 15h PMU driver.
[ 0.144010] ... version: 0
[ 0.148009] ... bit width: 48
[ 0.152009] ... generic registers: 6
[ 0.156010] ... value mask: 0000ffffffffffff
[ 0.160010] ... max period: 00007fffffffffff
[ 0.164010] ... fixed-purpose events: 0
[ 0.168010] ... event mask: 000000000000003f
[ 0.172105] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.176092] Booting Node 0, Processors #1
[ 0.012000] Initializing CPU#1
[ 0.280037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.284104] #2
[ 0.012000] Initializing CPU#2
[ 0.384036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.388099] #3 Ok.
[ 0.012000] Initializing CPU#3
[ 0.488040] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.492049] Brought up 4 CPUs
[ 0.496032] Total of 4 processors activated (25551.39 BogoMIPS).
[ 0.500822] devtmpfs: initialized
[ 0.504164] PM: Registering ACPI NVS region at add03000 (12738560 bytes)
[ 0.508220] PM: Registering ACPI NVS region at aee93000 (2121728 bytes)
[ 0.512178] print_constraints: dummy:
[ 0.516086] NET: Registered protocol family 16
[ 0.520151] Extended Config Space enabled on 0 nodes
[ 0.524057] ACPI: bus type pci registered
[ 0.528080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.532035] PCI: not using MMCONFIG
[ 0.544275] PCI: Using configuration type 1 for base access
[ 0.548035] PCI: Using configuration type 1 for extended access
[ 0.556222] bio: create slab <bio-0> at 0
[ 0.560097] ACPI: Added _OSI(Module Device)
[ 0.564036] ACPI: Added _OSI(Processor Device)
[ 0.568036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.572037] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.580740] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.589323] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.592521] ACPI: Interpreter enabled
[ 0.596040] ACPI: (supports S0 S3 S4 S5)
[ 0.601189] ACPI: Using IOAPIC for interrupt routing
[ 0.604146] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.608065] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.612039] PCI: Using MMCONFIG for extended config space
[ 0.633941] ACPI: No dock devices found.
[ 0.636042] HEST: Table not found.
[ 0.640043] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.644225] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.648229] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
[ 0.652042] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.656042] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
[ 0.660042] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.664042] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.668043] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.672043] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.677629] pci 0000:00:14.4: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.680101] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 0.696080] pci 0000:00:15.2: PCI bridge to [bus 03-03]
[ 0.700382] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.704152] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.713307] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.720089] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.726424] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.734025] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.740961] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.746406] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.750406] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.757523] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.764596] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.768057] vgaarb: loaded
[ 0.770764] vgaarb: bridge control possible 0000:00:01.0
[ 0.772083] PCI: Using ACPI for IRQ routing
[ 0.784067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.789015] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.796062] Switching to clocksource hpet
[ 0.801158] pnp: PnP ACPI init
[ 0.804214] ACPI: bus type pnp registered
[ 0.808446] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.815478] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.821402] system 00:02: [io 0x040b] has been reserved
[ 0.826724] system 00:02: [io 0x04d6] has been reserved
[ 0.832045] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.837972] system 00:02: [io 0x0c14] has been reserved
[ 0.843294] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.849221] system 00:02: [io 0x0c52] has been reserved
[ 0.854544] system 00:02: [io 0x0c6c] has been reserved
[ 0.859862] system 00:02: [io 0x0c6f] has been reserved
[ 0.865175] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.871095] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.877023] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.882944] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.888873] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.894799] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.900728] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.906654] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.912573] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.918494] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.924424] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.931389] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.938010] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.944625] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.951246] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.957867] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.964487] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 0.971247] system 00:03: [io 0x0e80-0x0eaf] has been reserved
[ 0.977176] system 00:03: [io 0x0eb0-0x0ebf] has been reserved
[ 0.983105] system 00:03: [io 0x0f40-0x0f4f] has been reserved
[ 0.989627] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.995731] system 00:0c: [mem 0xb0000000-0xcfffffff] has been reserved
[ 1.002430] system 00:0d: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 1.009202] pnp: PnP ACPI: found 15 devices
[ 1.013395] ACPI: ACPI bus type pnp unregistered
[ 1.018022] PnPBIOS: Disabled by ACPI PNP
[ 1.058741] pci 0000:00:14.4: PCI bridge to [bus 09-09]
[ 1.063988] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 1.069221] pci 0000:00:15.2: PCI bridge to [bus 03-03]
[ 1.074453] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 1.080555] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.087481] NET: Registered protocol family 2
[ 1.091904] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.099247] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.106884] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.113618] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.120237] TCP reno registered
[ 1.123378] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.129315] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.135755] NET: Registered protocol family 1
[ 1.384100] Unpacking initramfs...
[ 1.668780] Freeing initrd memory: 14788k freed
[ 1.676960] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 1.690776] [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[ 1.700255] Failed to setup IBS, -22
[ 1.703991] audit: initializing netlink socket (disabled)
[ 1.709405] type=2000 audit(1362592926.708:1): initialized
[ 1.726081] highmem bounce pool size: 64 pages
[ 1.730539] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.737629] VFS: Disk quotas dquot_6.5.2
[ 1.741587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.748171] msgmni has been set to 1690
[ 1.752216] alg: No test for stdrng (krng)
[ 1.756351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.763747] io scheduler noop registered
[ 1.767679] io scheduler deadline registered
[ 1.771987] io scheduler cfq registered (default)
[ 1.776984] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.783965] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.790933] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.797466] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 1.804014] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[ 1.810546] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[ 1.817094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.822685] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.829298] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.835967] ERST: Table is not found!
[ 1.839639] GHES: HEST is not enabled!
[ 1.843406] isapnp: Scanning for PnP cards...
[ 2.201018] isapnp: No Plug & Play device found
[ 2.205599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[ 2.232575] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
�[ 2.260939] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.280430] Linux agpgart interface v0.103
[ 2.284721] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.291953] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.296940] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.302140] mousedev: PS/2 mouse device common for all mice
[ 2.307756] rtc_cmos 00:06: RTC can wake from S4
[ 2.312472] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.318585] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.325389] cpuidle: using governor ladder
[ 2.329495] cpuidle: using governor menu
[ 2.333584] TCP cubic registered
[ 2.336900] NET: Registered protocol family 10
[ 2.341719] Mobile IPv6
[ 2.344178] NET: Registered protocol family 17
[ 2.348633] Registering the dns_resolver key type
[ 2.353362] Using IPI No-Shortcut mode
[ 2.357233] registered taskstats version 1
[ 2.361885] rtc_cmos 00:06: setting system clock to 2013-03-06 18:02:08 UTC (1362592928)
[ 2.370109] Initializing network drop monitor service
[ 2.375376] Freeing unused kernel memory: 416k freed
[ 2.380668] Write protecting the kernel text: 2848k
[ 2.385773] Write protecting the kernel read-only data: 1092k
[ 2.391748] NX-protecting the kernel data: 3296k
Loading, please wait...
[ 2.409237] udev[59]: starting version 164
[ 2.427450] usbcore: registered new interface driver usbfs
[ 2.431650] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.431658] ACPI: Power Button [PWRB]
[ 2.431725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.431728] ACPI: Power Button [PWRF]
[ 2.475447] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.476949] usbcore: registered new interface driver hub
[ 2.487123] usbcore: registered new device driver usb
[ 2.489077] r8169 0000:03:00.0: eth0: RTL8168dp/8111dp at 0xf820e000, 74:27:ea:32:37:7e, XID 08b00000 IRQ 42
[ 2.489080] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.512551] SCSI subsystem initialized
[ 2.516597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.523406] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.528946] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.536902] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 2.542947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.550062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.557619] usb usb1: Product: xHCI Host Controller
[ 2.562725] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd
[ 2.569163] usb usb1: SerialNumber: 0000:00:10.0
[ 2.574118] hub 1-0:1.0: USB hub found
[ 2.578071] hub 1-0:1.0: 2 ports detected
[ 2.582300] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.587764] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.595465] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.602566] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.610131] usb usb2: Product: xHCI Host Controller
[ 2.615226] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd
[ 2.621692] usb usb2: SerialNumber: 0000:00:10.0
[ 2.626608] hub 2-0:1.0: USB hub found
[ 2.630529] hub 2-0:1.0: 2 ports detected
[ 2.668077] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.673512] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.681223] Refined TSC clocksource calibration: 3194.030 MHz.
[ 2.687318] Switching to clocksource tsc
[ 2.688357] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 2.688818] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.688825] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.688829] usb usb3: Product: xHCI Host Controller
[ 2.688833] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd
[ 2.688836] usb usb3: SerialNumber: 0000:00:10.1
[ 2.689280] hub 3-0:1.0: USB hub found
[ 2.689298] hub 3-0:1.0: 2 ports detected
[ 2.689518] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.689532] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 2.691690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.691697] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.691703] usb usb4: Product: xHCI Host Controller
[ 2.691706] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd
[ 2.691710] usb usb4: SerialNumber: 0000:00:10.1
[ 2.692135] hub 4-0:1.0: USB hub found
[ 2.692148] hub 4-0:1.0: 2 ports detected
[ 2.824086] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.829559] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 2.837226] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.846329] ehci_hcd 0000:00:12.2: debug port 1
[ 2.851049] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 2.868028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.874051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.881127] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.888657] usb usb5: Product: EHCI Host Controller
[ 2.893719] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.900201] usb usb5: SerialNumber: 0000:00:12.2
[ 2.905203] hub 5-0:1.0: USB hub found
[ 2.909178] hub 5-0:1.0: 5 ports detected
[ 2.913466] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.918918] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 2.926631] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.935696] ehci_hcd 0000:00:13.2: debug port 1
[ 2.940433] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 3.000039] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 3.012036] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.018033] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.025085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.032609] usb usb6: Product: EHCI Host Controller
[ 3.037688] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 3.044128] usb usb6: SerialNumber: 0000:00:13.2
[ 3.049037] hub 6-0:1.0: USB hub found
[ 3.052910] hub 6-0:1.0: 5 ports detected
[ 3.057306] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x23 impl SATA mode
[ 3.065850] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 3.070754] usb 3-2: New USB device found, idVendor=04b3, idProduct=3025
[ 3.070757] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.070759] usb 3-2: Product: USB NetVista Full Width Keyboard
[ 3.070760] usb 3-2: Manufacturer: CHICONY
[ 3.070856] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.109770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.116344] scsi0 : ahci
[ 3.119107] scsi1 : ahci
[ 3.121905] scsi2 : ahci
[ 3.124628] scsi3 : ahci
[ 3.127339] scsi4 : ahci
[ 3.130038] scsi5 : ahci
[ 3.132944] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 53
[ 3.134936] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input2
[ 3.134989] generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:10.1-2/input0
[ 3.135006] usbcore: registered new interface driver usbhid
[ 3.135008] usbhid: USB HID core driver
[ 3.176675] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 53
[ 3.184400] ata3: DUMMY
[ 3.186931] ata4: DUMMY
[ 3.189485] ata5: DUMMY
[ 3.192046] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 53
[ 3.199821] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.205294] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 3.213000] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 3.228037] usb 5-3: new high-speed USB device number 2 using ehci_hcd
[ 3.276043] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.283132] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.290680] usb usb7: Product: OHCI Host Controller
[ 3.295776] usb usb7: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 3.302247] usb usb7: SerialNumber: 0000:00:12.0
[ 3.307206] hub 7-0:1.0: USB hub found
[ 3.311158] hub 7-0:1.0: 5 ports detected
[ 3.315402] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.320854] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 3.328581] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 3.380523] usb 5-3: New USB device found, idVendor=0bda, idProduct=0184
[ 3.387514] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.392074] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.392080] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.392085] usb usb8: Product: OHCI Host Controller
[ 3.392095] usb usb8: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 3.392099] usb usb8: SerialNumber: 0000:00:13.0
[ 3.392561] hub 8-0:1.0: USB hub found
[ 3.392577] hub 8-0:1.0: 5 ports detected
[ 3.392869] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.392890] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 3.392940] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 3.452049] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.452056] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.452062] usb usb9: Product: OHCI Host Controller
[ 3.452066] usb usb9: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 3.452069] usb usb9: SerialNumber: 0000:00:14.5
[ 3.452451] hub 9-0:1.0: USB hub found
[ 3.452477] hub 9-0:1.0: 2 ports detected
[ 3.492432] usb 5-3: Product: USB2.0-CRW
[ 3.496713] usb 5-3: Manufacturer: Generic
[ 3.500975] usb 5-3: SerialNumber: 20100818841300000
[ 3.512619] Initializing USB Mass Storage driver...
[ 3.517813] scsi6 : usb-storage 5-3:1.0
[ 3.521855] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.521897] usbcore: registered new interface driver usb-storage
[ 3.521899] USB Mass Storage support registered.
[ 3.704030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.712960] ata2.00: ATAPI: PLDS DVD-RW DH16ACSH, JL3B, max UDMA/100
[ 3.720376] ata2.00: configured for UDMA/100
[ 3.768033] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.776067] ata1.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[ 3.783251] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.792337] ata1.00: configured for UDMA/100
[ 3.796958] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 19.0 PQ: 0 ANSI: 5
[ 3.808930] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DH16ACSH JL3B PQ: 0 ANSI: 5
[ 3.821394] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.829264] sd 0:0:0:0: [sda] Write Protect is off
[ 3.834283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.849319] sda: sda1 sda2
[ 3.852502] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.863506] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.871351] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.878567] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.884204] sr 1:0:0:0: Attached scsi generic sg1 type 5
Begin: Loading essential drivers[ 4.187557] microcode: CPU0: patch_level=0x06001116
... [ 4.195768] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 4.209366] microcode: CPU0: new patch_level=0x06001119
[ 4.217057] microcode: CPU1: patch_level=0x06001116
[ 4.224679] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 4.238339] microcode: CPU1: new patch_level=0x06001119
[ 4.245875] microcode: CPU2: patch_level=0x00000000
[ 4.253601] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 4.267259] microcode: CPU2: new patch_level=0x06001119
[ 4.275057] microcode: CPU3: patch_level=0x00000000
[ 4.282732] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 4.296361] microcode: CPU3: new patch_level=0x06001119
[ 4.304074] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting[ 4.319789] device-mapper: uevent: version 1.0.3
root file syste[ 4.325896] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
m ... Begin: Running /scripts/local-top ... done.
Begin: Running /[ 4.451183] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 4.481701] kjournald starting. Commit interval 5 seconds
[ 4.481724] EXT3-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... [ 4.522514] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.533758] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.545019] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.556373] scsi 6:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
done.
[ 4.567647] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/M.S.PRO 1.00 PQ: 0 ANSI: 0 CCS
[ 4.576975] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.582668] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 4.588336] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 4.594127] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 4.599818] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 4.609997] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 4.616750] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.627994] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 4.631882] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 4.633868] sd 6:0:0:4: [sdf] Attached SCSI removable disk
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[468]: spec[ 5.562029] udev[469]: starting version 164
ified group 'arduino' unknown
.
Synthesizing the initial hotplug events...done.
udevd[469]: specified group 'arduino' unknown
Waiting for /dev to be fully populated...[ 5.872613] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.911663] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.945303] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.017655] ipmi message handler version 39.2
[ 6.147891] IPMI System Interface driver.
[ 6.152137] ipmi_si 0000:03:00.3: probing via PCI
[ 6.156843] ipmi_si 0000:03:00.3: [io 0xe000-0xe0ff] regsize 1 spacing 1 irq 17
[ 6.164720] ipmi_si: Adding PCI-specified kcs state machine
[ 6.170548] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0xe000, slave address 0x0, irq 17
[ 6.437415] powernow-k8: Found 1 AMD A8-5500B APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
[ 6.448050] powernow-k8: Core Performance Boosting: on.
[ 6.453580] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 6.458706] powernow-k8: 1 : pstate 1 (2900 MHz)
[ 6.463789] powernow-k8: 2 : pstate 2 (2600 MHz)
[ 6.468855] powernow-k8: 3 : pstate 3 (2200 MHz)
[ 6.473973] powernow-k8: 4 : pstate 4 (1800 MHz)
[ 6.479043] powernow-k8: 5 : pstate 5 (1400 MHz)
[ 6.798992] Too many HDMI devices
[ 6.802599] Too many HDMI devices
[ 6.806188] Too many HDMI devices
[ 6.809802] Too many HDMI devices
[ 6.813365] Too many HDMI devices
[ 6.816962] Too many HDMI devices
[ 6.820692] hda-codec: out of range cmd 0:0:aa88:707:0
[ 6.826207] hda-codec: out of range cmd 0:0:aa88:708:aa88
[ 6.832158] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.838835] HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
[ 6.845513] HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
[ 6.852187] HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
[ 6.858852] hda-codec: out of range cmd 0:0:aa88:f00:c
[ 6.864201] hda-codec: out of range cmd 0:0:aa88:709:0
[ 6.869563] hda-codec: out of range cmd 0:0:aa88:f09:0
[ 6.874910] HDMI status: Codec=0 Pin=43656 Presence_Detect=1 ELD_Valid=1
[ 6.881878] hda-codec: out of range cmd 0:0:aa88:f2e:8
[ 6.887235] hda-codec: out of range cmd 0:0:aa88:709:0
[ 6.892590] hda-codec: out of range cmd 0:0:aa88:f09:0
[ 6.897976] HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
[ 6.904706] hda_codec: cannot build controls for #0 (error -16)
[ 6.972299] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
^CSetting preliminary keymap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-root: clean, 133927/249984 fil[ 170.872620] EXT3-fs (dm-0): using internal journal
es, 917058/999424 blocks
done.
Cleaning up ifupdown....
[ 171.020358] loop: module loaded
Loading kernel modules...done.
Setting up networking....
[ 171.305353] RPC: Registered named UNIX socket transport module.
[ 171.311741] RPC: Registered udp transport module.
[ 171.316862] RPC: Registered tcp transport module.
[ 171.321973] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 171.385873] FS-Cache: Loaded
[ 171.421845] FS-Cache: Netfs 'nfs' registered for caching
[ 171.433788] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
hostname: Name or service not known
Starting NFS common utilities:mount: mount point /var/lib/nfs/rpc_pipefs does not exist
.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "krazy" using metadata type lvm2
5 logical volume(s) in volume group "krazy" now active
.
Activating lvm and md swap...[ 171.900795] Adding 499708k swap on /dev/mapper/krazy-swap_1. Priority:-1 extents:1 across:499708k
done.
Checking file systems...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/sda1: clean, 240/62248 files, 106892/248832 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-home: clean, 689/29859840 files, 1925467/119409664 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-tmp: clean, 16/62464 files, 8342/249856 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-var: clean, 8258/312624 files, 155445/1249280 blocks
done.
Mounting local filesystems...[ 172.858589] kjournald starting. Commit interval 5 seconds
[ 172.858837] EXT3-fs (sda1): using internal journal
[ 172.858845] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 172.931575] kjournald starting. Commit interval 5 seconds
[ 172.932363] EXT3-fs (dm-4): using internal journal
[ 172.932385] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 172.982020] kjournald starting. Commit interval 5 seconds
[ 172.982251] EXT3-fs (dm-2): using internal journal
[ 172.982259] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 173.045032] kjournald starting. Commit interval 5 seconds
[ 173.050980] EXT3-fs (dm-3): using internal journal
[ 173.056154] EXT3-fs (dm-3): mounted filesystem with ordered data mode
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up ALSA...done.
[ 173.666249] fuse init (API version 7.17)
Setting console screen modes.
]Rcannot (un)set powersave mode
[9;30][14;30]Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...done.
Setting kernel variables ...done.
rpcbind: Cannot open '/var/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory)
rpcbind: Cannot open '/var/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory)
Starting rpcbind daemon....
[ 174.259609] r8169 0000:03:00.0: eth0: link down
[ 174.264809] ADDRCONF(NETDEV_UP): eth0: link is not ready
startpar: service(s) returned failure: udev ... [31mfailed![3
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting rpcbind daemon...Already running..
cachefilesd disabled, please set RUN=yes in /etc/default/cachefilesd ... [31mfailed![39;49m
Starting enhanced syslogd: rsyslogd.
Checking battery state...done.
Starting deferred execution scheduler: atd.
Starting ACPI services....
Starting anac(h)ronistic cron: anacron.
[ 175.449747] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
Starting acpi_fakekey daemon...done.
Starting periodic command scheduler: cron.
Starting NTP server: ntpd.
hostname: Name or service not known
Starting NFS common utilities: idmapd gssd svcgssd [31mfailed![39;49m
[ 176.166286] sshd (2133): /proc/2133/oom_adj is deprecated, please use /proc/2133/oom_score_adj instead.
Starting OpenBSD Secure Shell server: sshd.
Starting system message bus: dbus.
Starting Postfix Mail Transport Agent: postfix.
Starting GNOME Display Manager: gdm3.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting bluetooth: bluetoothd[ 179.144484] Bluetooth: Core ver 2.16
[ 179.148394] NET: Registered protocol family 31
[ 179.153237] Bluetooth: HCI device and connection manager initialized
[ 179.160136] Bluetooth: HCI socket layer initialized
[ 179.165478] Bluetooth: L2CAP socket layer initialized
[ 179.170977] Bluetooth: SCO socket layer initialized
[ 179.210755] Bluetooth: RFCOMM TTY layer initialized
[ 179.216076] Bluetooth: RFCOMM socket layer initialized
[ 179.221626] Bluetooth: RFCOMM ver 1.11
.
[ 179.253951] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 179.259731] Bluetooth: BNEP filters: protocol multicast
[ 179.318902] Bridge firewalling registered
Starting Hardware abstraction layer: hald.
Stopping the hotplug events dispatcher: udevd[ 185.639887] BUG: unable to handle kernel NULL pointer dereference.
Starting the at (null)
hotplug events d[ 185.640005] IP:ispatcher: udevd [< (null)>] (null)
[ 185.640005] *pdpt = 000000003350d001 *pde = 0000000000000000
[ 185.640005] Oops: 0010 [#1] SMP
[ 185.640005] Modules linked in: bridge stp bnep rfcomm bluetooth rfkill crc16 rpcsec_gss_krb5 uinput fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc loop snd_hda_codec_realtek snd_hda_codec_hdmi powernow_k8 mperf crc32c_intel snd_hda_intel aesni_intel snd_hda_codec psmouse serio_raw cryptd ipmi_si(+) snd_seq snd_seq_device aes_i586 snd_hwdep snd_pcm snd_timer
[ 185.699960] udev[2570]: starting version 164
[ 185.640005] aes_generic evdev ipmi_msghandler processor thermal_sys tpm_tis.
tpm tpm_bios snd soundcore i2c_piix4 i2c_core pcspkr snd_page_alloc ext3 jbd mbcache dm_mod microcode sg sr_mod sd_mod cdrom crc_t10dif usb_storage usbhid hid ohci_hcd ahci libahci libata ehci_hcd xhci_hcd scsi_mod r8169 mii usbcore button usb_common [last unloaded: scsi_wait_scan]
[ 185.640005]
[ 185.640005] Pid: 2563, comm: pulseaudio Not tainted 3.2.0-4-686-pae #1 Debian 3.2.35-2 LENOVO 4865A14/Annapurna CRB
[ 185.742935] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 3
[ 185.742935] EIP is at 0x0
[ 185.742935] EAX: f6cb0e2c EBX: 00000080 ECX: f68e8480 EDX: f6d7c800
[ 185.742935] ESI: f843905c EDI: f375cbe0 EBP: f361864c ESP: f2cebd98
[ 185.742935] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 185.742935] Process pulseaudio (pid: 2563, ti=f2cea000 task=f2c9e080 task.ti=f2cea000)
[ 185.742935] Stack:
[ 185.742935] f8436515 00000080 00000080 f6f57c00 f68e8480 f6f59200 f6cb0e2c f375cbe0
[ 185.742935] f6f59238 f2cebe04 00000000 f843a518 f6e53200 f847bbcb f68e8480 f3721000
[ 185.742935] f2c9e080 f847bcbf f2cebe04 f3721118 f372112c 00000000 00000000 f2c9e080
[ 185.742935] Call Trace:
[ 185.742935] [<f8436515>] ? azx_pcm_open+0x171/0x1f7 [snd_hda_intel]
[ 185.742935] [<f847bbcb>] ? snd_pcm_open_substream+0x36/0x68 [snd_pcm]
[ 185.742935] [<f847bcbf>] ? snd_pcm_open+0xc2/0x1be [snd_pcm]
[ 185.742935] [<c10320e5>] ? try_to_wake_up+0x155/0x155
[ 185.742935] [<f847be33>] ? snd_pcm_playback_open+0x31/0x46 [snd_pcm]
[ 185.742935] [<f83ae49e>] ? snd_open+0xf5/0x133 [snd]
[ 185.742935] [<c10cf2d7>] ? chrdev_open+0xf3/0x111
[ 185.742935] [<c10cafb3>] ? __dentry_open+0x17a/0x253
[ 185.742935] [<c10cbd01>] ? nameidata_to_filp+0x3a/0x45
[ 185.742935] [<c10cf1e4>] ? cdev_put+0x17/0x17
[ 185.742935] [<c10d5dac>] ? do_last+0x4f8/0x513
[ 185.742935] [<c10d606e>] ? path_openat+0xa1/0x28b
[ 185.742935] [<c10d6301>] ? do_filp_open+0x23/0x5c
[ 185.742935] [<c102a0e5>] ? should_resched+0x5/0x1e
[ 185.742935] [<c12c0c39>] ? _cond_resched+0x5/0x18
[ 185.742935] [<c10cbd60>] ? do_sys_open+0x54/0xcd
[ 185.742935] [<c10d6f81>] ? do_fcntl+0x151/0x3b0
[ 185.742935] [<c10cbdf7>] ? sys_open+0x1e/0x23
[ 185.742935] [<c12c641f>] ? sysenter_do_call+0x12/0x28
[ 185.742935] Code: Bad EIP value.startpar: servic
e(s) returned fa[ 185.742935] EIP: [<00000000>] ilure: nfs-commo0x0n ... SS:ESP 0068:f2cebd98
[ 185.742935] CR2: 0000000000000000
[ 185.939113] ---[ end trace 9980e47e02417717 ]---
[31mfailed![39;49m
[ 227.426194] r8169 0000:03:00.0: eth0: link up
[ 227.430847] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 238.304024] eth0: no IPv6 routers present
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Using makefile-style concurrent boot in runlevel 6.
Stopping anac(h)ronistic cron: anacron.
Stopping rpcbind daemon....
cachefilesd disabled, please set RUN=yes in /etc/default/cachefilesd ... [31mfailed![39;49m
Stopping deferred execution scheduler: atd.
Stopping Postfix Mail Transport Agent: postfix.
Stopping bluetooth: bluetoothd.
Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ 332.367714] fuse exit
Shutting down ALSA...done.
Stopping GNOME Display Manager: gdm3[ 333.541208] mtrr: no MTRR for d0000000,1000000 found
.
Asking all remaining processes to terminate...done.
Currently running processes (pstree):
init-+-modprobe
|-rc---startpar---sendsigs---pstree
`-rsyslogd---3*[{rsyslogd}]
Killing all remaining processes...[31mfailed.[39;49m
Stopping enhanced syslogd: rsyslogd.
Stopping NFS common utilities: svcgssd gssd idmapd.
Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/74:27:ea:32:37:7e
Sending on LPF/eth0/74:27:ea:32:37:7e
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.23.84 port 67
done.
Cleaning up ifupdown....
Saving the system clock.
Deactivating swap...done.
Unmounting local filesystems...umount2: Device or resource busy
umount: /dev/mapper/krazy-var busy - remounted read-only
done.
Shutting down LVM Volume Groups Can't deactivate volume group "krazy" with 2 open logical volume(s)
[31mfailed![39;49m
Will now restart.
[ 348.144692] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 348.161418] Disabling non-boot CPUs ...
[ 348.476577] Restarting system.
[ 348.479906] machine restart
[ 348.483129] ACPI MEMORY or I/O RESET_REG.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.7.8-1~experimental.1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ada17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ada18000-0x00000000adcf7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adcf8000-0x00000000add02fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000add03000-0x00000000ae928fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae929000-0x00000000aee91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aee92000-0x00000000aee92fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aee93000-0x00000000af098fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af099000-0x00000000af4bffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af4c0000-0x00000000af7f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af7f2000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [c00fd870]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] RAMDISK: [mem 0x370e7000-0x37feffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x361de000-0x370e6f2e]
[ 0.000000] Move RAMDISK from [mem 0x370e7000-0x37feff2e] to [mem 0x361de000-0x370e6f2e]
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT adcfa080 00084 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FACP add00b40 0010C (v05 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
[ 0.000000] ACPI: DSDT adcfa198 069A2 (v02 LENOVO TC-9Z 00001210 INTL 20051117)
[ 0.000000] ACPI: FACS ae920080 00040
[ 0.000000] ACPI: APIC add00c50 00072 (v03 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FPDT add00cc8 00044 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: TCPA add00d10 00032 (v02 LENOVO TC-9Z 00001210 MSFT 01000013)
[ 0.000000] ACPI: MCFG add00d48 0003C (v01 LENOVO TC-9Z 00001210 MSFT 00010013)
[ 0.000000] ACPI: SLIC add00d88 00176 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: BGRT add00f00 00038 (v00 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: SSDT add00f38 00C04 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: SSDT add01b40 004B7 (v02 LENOVO TC-9Z 00001210 MSFT 04000000)
[ 0.000000] ACPI: IVRS add01ff8 00070 (v02 LENOVO TC-9Z 00001210 AMD 00000000)
[ 0.000000] ACPI: CRAT add02068 002A8 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: HPET add02310 00038 (v01 LENOVO TC-9Z 00001210 AMI 00000005)
[ 0.000000] 3974MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0x2fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xada17fff]
[ 0.000000] node 0: [mem 0xaee92000-0xaee92fff]
[ 0.000000] node 0: [mem 0xaf099000-0xaf4bffff]
[ 0.000000] node 0: [mem 0xaf7f2000-0xaf7fffff]
[ 0.000000] node 0: [mem 0x00001000-0x2fffffff]
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xaf800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33728 r0 d23616 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 899034
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7-trunk-686-pae root=/dev/mapper/krazy-root ro verbose console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:00130000)
[ 0.000000] Memory: 3574096k/4980736k available (3000k kernel code, 60956k reserved, 1503k data, 432k init, 2724156k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1466000 - 0xc14d2000 ( 432 kB)
[ 0.000000] .data : 0xc12ee240 - 0xc1465f00 (1503 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12ee240 (3000 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3194.087 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.17 BogoMIPS (lpj=12776348)
[ 0.010693] pid_max: default: 32768 minimum: 301
[ 0.015322] Security Framework initialized
[ 0.019423] AppArmor: AppArmor disabled by boot time parameter
[ 0.025260] Mount-cache hash table entries: 512
[ 0.029921] Initializing cgroup subsys cpuacct
[ 0.034360] Initializing cgroup subsys memory
[ 0.038717] Initializing cgroup subsys devices
[ 0.043158] Initializing cgroup subsys freezer
[ 0.047597] Initializing cgroup subsys net_cls
[ 0.052033] Initializing cgroup subsys blkio
[ 0.056298] Initializing cgroup subsys perf_event
[ 0.061014] CPU: Physical Processor ID: 0
[ 0.065017] CPU: Processor Core ID: 0
[ 0.068680] mce: CPU supports 7 MCE banks
[ 0.072703] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.072703] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.072703] tlb_flushall_shift: 5
[ 0.087937] Freeing SMP alternatives: 8k freed
[ 0.092617] ACPI: Core revision 20120913
[ 0.120129] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.125822] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.171423] smpboot: CPU0: AMD A8-5500B APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.285128] Performance Events:
[ 0.288181] perf: AMD core performance counters detected
[ 0.293683] AMD PMU driver.
[ 0.296476] ... version: 0
[ 0.300482] ... bit width: 48
[ 0.304571] ... generic registers: 6
[ 0.308580] ... value mask: 0000ffffffffffff
[ 0.313882] ... max period: 00007fffffffffff
[ 0.319183] ... fixed-purpose events: 0
[ 0.323188] ... event mask: 000000000000003f
[ 0.328640] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.336690] smpboot: Booting Node 0, Processors #1[ 0.351664] Initializing CPU#1
[ 0.357137] #2[ 0.368638] Initializing CPU#2
[ 0.374081] #3 OK
[ 0.386038] Initializing CPU#3
[ 0.391181] Brought up 4 CPUs
[ 0.394151] smpboot: Total of 4 processors activated (25552.69 BogoMIPS)
[ 0.401747] devtmpfs: initialized
[ 0.405232] PM: Registering ACPI NVS region [mem 0xadd03000-0xae928fff] (12738560 bytes)
[ 0.413482] PM: Registering ACPI NVS region [mem 0xaee93000-0xaf098fff] (2121728 bytes)
[ 0.421587] regulator-dummy: no parameters
[ 0.425741] NET: Registered protocol family 16
[ 0.430293] ACPI: bus type pci registered
[ 0.434339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.443622] PCI: not using MMCONFIG
[ 0.452435] PCI: Using configuration type 1 for base access
[ 0.458000] PCI: Using configuration type 1 for extended access
[ 0.464455] bio: create slab <bio-0> at 0
[ 0.468554] ACPI: Added _OSI(Module Device)
[ 0.472732] ACPI: Added _OSI(Processor Device)
[ 0.477169] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.481867] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.488769] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.497345] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.503828] ACPI: Interpreter enabled
[ 0.507491] ACPI: (supports S0 S3 S4 S5)
[ 0.511510] ACPI: Using IOAPIC for interrupt routing
[ 0.516573] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.525881] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.534557] PCI: Using MMCONFIG for extended config space
[ 0.558439] ACPI: No dock devices found.
[ 0.562365] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.571661] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.578014] PCI host bridge to bus 0000:00
[ 0.582110] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.587583] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.593753] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.599921] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.606088] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.612255] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.619116] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.625975] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.634433] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode)
[ 0.641268] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.652460] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.657753] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.663513] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.673317] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.680222] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.687125] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.694026] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.700919] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.707805] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.714689] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.721569] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.728503] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.736576] vgaarb: loaded
[ 0.739286] vgaarb: bridge control possible 0000:00:01.0
[ 0.744625] PCI: Using ACPI for IRQ routing
[ 0.755772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.760749] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.768589] Switching to clocksource hpet
[ 0.773752] pnp: PnP ACPI init
[ 0.776821] ACPI: bus type pnp registered
[ 0.781029] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.788053] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.793966] system 00:02: [io 0x040b] has been reserved
[ 0.799276] system 00:02: [io 0x04d6] has been reserved
[ 0.804586] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.810505] system 00:02: [io 0x0c14] has been reserved
[ 0.815816] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.821733] system 00:02: [io 0x0c52] has been reserved
[ 0.827042] system 00:02: [io 0x0c6c] has been reserved
[ 0.832355] system 00:02: [io 0x0c6f] has been reserved
[ 0.837666] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.843583] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.849499] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.855417] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.861335] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.867251] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.873169] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.879086] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.885003] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.890920] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.896835] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.903792] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.910400] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.917010] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.923617] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.930226] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.936837] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 0.943576] system 00:03: [io 0x0e80-0x0eaf] has been reserved
[ 0.949493] system 00:03: [io 0x0eb0-0x0ebf] has been reserved
[ 0.955408] system 00:03: [io 0x0f40-0x0f4f] has been reserved
[ 0.961892] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.967963] system 00:0c: [mem 0xb0000000-0xcfffffff] has been reserved
[ 0.974638] system 00:0d: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.981390] pnp: PnP ACPI: found 15 devices
[ 0.985571] ACPI: ACPI bus type pnp unregistered
[ 0.990181] PnPBIOS: Disabled by ACPI PNP
[ 1.030558] pci 0000:00:14.4: PCI bridge to [bus 09]
[ 1.035530] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 1.040503] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 1.045470] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 1.051562] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.058453] NET: Registered protocol family 2
[ 1.062966] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.070576] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.077294] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.083923] TCP: reno registered
[ 1.087156] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.093077] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.099492] NET: Registered protocol family 1
[ 1.343643] Unpacking initramfs...
[ 1.643426] Freeing initrd memory: 15396k freed
[ 1.651371] LVT offset 0 assigned for vector 0x400
[ 1.656186] perf: AMD IBS detected (0x000000ff)
[ 1.660932] audit: initializing netlink socket (disabled)
[ 1.666348] type=2000 audit(1362593411.428:1): initialized
[ 1.683410] bounce pool size: 64 pages
[ 1.687164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.693979] VFS: Disk quotas dquot_6.5.2
[ 1.697936] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.704520] msgmni has been set to 1690
[ 1.708595] alg: No test for stdrng (krng)
[ 1.712743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.720185] io scheduler noop registered
[ 1.724108] io scheduler deadline registered
[ 1.728409] io scheduler cfq registered (default)
[ 1.733390] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.740369] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.747320] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.753839] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 1.760355] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[ 1.766875] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[ 1.773416] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.779006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.785611] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.792285] GHES: HEST is not enabled!
[ 1.796050] isapnp: Scanning for PnP cards...
[ 2.153010] isapnp: No Plug & Play device found
[ 2.157619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[ 2.184571] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.190634] Linux agpgart interface v0.103
[ 2.195074] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.202272] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.207238] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.212414] mousedev: PS/2 mouse device common for all mice
[ 2.218017] rtc_cmos 00:06: RTC can wake from S4
[ 2.222734] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.228843] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.235628] cpuidle: using governor ladder
[ 2.239722] cpuidle: using governor menu
[ 2.243674] drop_monitor: Initializing network drop monitor service
[ 2.249997] TCP: cubic registered
[ 2.253355] NET: Registered protocol family 10
[ 2.257959] mip6: Mobile IPv6
[ 2.260925] NET: Registered protocol family 17
[ 2.265595] Using IPI No-Shortcut mode
[ 2.269456] registered taskstats version 1
[ 2.274119] rtc_cmos 00:06: setting system clock to 2013-03-06 18:10:13 UTC (1362593413)
[ 2.282509] Freeing unused kernel memory: 432k freed
[ 2.287789] Write protecting the kernel text: 3004k
[ 2.292902] Write protecting the kernel read-only data: 1192k
[ 2.298872] NX-protecting the kernel data: 3140k
Loading, please wait...
[ 2.316632] udev[69]: starting version 164
[ 2.325646] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.337266] ACPI: bus type usb registered
[ 2.344711] [drm] Initialized drm 1.1.0 20060810
[ 2.349579] microcode: CPU0: patch_level=0x06001116
[ 2.357441] ACPI: Power Button [PWRB]
[ 2.360183] usbcore: registered new interface driver usbfs
[ 2.360194] usbcore: registered new interface driver hub
[ 2.377140] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.379150] usbcore: registered new device driver usb
[ 2.390022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.391663] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 2.405640] microcode: CPU0: new patch_level=0x06001119
[ 2.412587] SCSI subsystem initialized
[ 2.416689] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.424559] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.425202] r8169 0000:03:00.0 eth0: RTL8168dp/8111dp at 0xf820e000, 74:27:ea:32:37:7e, XID 08b00000 IRQ 42
[ 2.425204] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.432709] microcode: CPU1: patch_level=0x06001116
[ 2.432730] microcode: CPU2: patch_level=0x00000000
[ 2.446701] microcode: CPU2: new patch_level=0x06001119
[ 2.465396] microcode: CPU3: patch_level=0x00000000
[ 2.465480] ACPI: Power Button [PWRF]
[ 2.465742] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.466026] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 2.466301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.466303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.466305] usb usb1: Product: xHCI Host Controller
[ 2.466306] usb usb1: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 2.466307] usb usb1: SerialNumber: 0000:00:10.0
[ 2.466425] hub 1-0:1.0: USB hub found
[ 2.466433] hub 1-0:1.0: 2 ports detected
[ 2.466520] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.466523] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.469376] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.469378] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.469380] usb usb2: Product: xHCI Host Controller
[ 2.469381] usb usb2: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 2.469382] usb usb2: SerialNumber: 0000:00:10.0
[ 2.469493] hub 2-0:1.0: USB hub found
[ 2.469498] hub 2-0:1.0: 2 ports detected
[ 2.569297] ACPI: bus type scsi registered
[ 2.589045] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.598337] [drm] radeon kernel modesetting enabled.
[ 2.603599] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.609193] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 2.617148] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.626526] ehci_hcd 0000:00:12.2: debug port 1
[ 2.631414] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 2.649133] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.649150] tsc: Refined TSC clocksource calibration: 3194.031 MHz
[ 2.649162] Switching to clocksource tsc
[ 2.666263] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.673304] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.680808] usb usb3: Product: EHCI Host Controller
[ 2.685885] usb usb3: Manufacturer: Linux 3.7-trunk-686-pae ehci_hcd
[ 2.692499] usb usb3: SerialNumber: 0000:00:12.2
[ 2.697404] hub 3-0:1.0: USB hub found
[ 2.701312] hub 3-0:1.0: 5 ports detected
[ 2.705599] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.711018] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.718717] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.727769] ehci_hcd 0000:00:13.2: debug port 1
[ 2.732509] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 2.748941] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.754935] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.761987] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.769519] usb usb4: Product: EHCI Host Controller
[ 2.774604] usb usb4: Manufacturer: Linux 3.7-trunk-686-pae ehci_hcd
[ 2.781205] usb usb4: SerialNumber: 0000:00:13.2
[ 2.786113] hub 4-0:1.0: USB hub found
[ 2.790006] hub 4-0:1.0: 5 ports detected
[ 2.794442] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x23 impl SATA mode
[ 2.802899] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.811596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.812263] scsi0 : ahci
[ 2.820766] scsi1 : ahci
[ 2.823516] scsi2 : ahci
[ 2.826216] scsi3 : ahci
[ 2.828895] scsi4 : ahci
[ 2.831589] scsi5 : ahci
[ 2.834270] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 48
[ 2.841966] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 48
[ 2.849637] ata3: DUMMY
[ 2.852172] ata4: DUMMY
[ 2.854715] ata5: DUMMY
[ 2.857268] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 48
[ 2.865156] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9904 0x17AA:0x3089).
[ 2.873569] [drm] register mmio base: 0xFEB00000
[ 2.878373] [drm] register mmio size: 262144
[ 2.882926] ATOM BIOS: 113
[ 2.885758] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.894816] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 2.903047] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.908026] [drm] RAM width 64bits DDR
[ 2.911986] [TTM] Zone kernel: Available graphics memory: 432888 kiB
[ 2.918680] [TTM] Zone highmem: Available graphics memory: 1794966 kiB
[ 2.925479] [TTM] Initializing pool allocator
[ 2.929997] [TTM] Initializing DMA pool allocator
[ 2.934917] [drm] radeon: 512M of VRAM memory ready
[ 2.939985] [drm] radeon: 512M of GTT memory ready.
[ 2.945058] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.951922] [drm] Driver supports precise vblank timestamp query.
[ 2.958292] radeon 0000:00:01.0: radeon: using MSI.
[ 2.963617] [drm] radeon: irq initialized.
[ 2.967877] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.974882] [drm] Loading ARUBA Microcode
[ 2.979065] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_pfp.bin into memory
[ 2.987591] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_me.bin into memory
[ 2.996005] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_rlc.bin into memory
[ 3.028423] usb 3-3: new high-speed USB device number 2 using ehci_hcd
[ 3.037002] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 3.044217] radeon 0000:00:01.0: WB enabled
[ 3.048545] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffa6bc00
[ 3.059008] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffa6bc04
[ 3.069510] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffa6bc08
[ 3.098679] [drm] ring test on 0 succeeded in 3 usecs
[ 3.112585] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.119172] [drm] Radeon Display Connectors
[ 3.123505] [drm] Connector 0:
[ 3.126663] [drm] DP-1
[ 3.129309] [drm] HPD1
[ 3.131945] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.139640] [drm] Encoders:
[ 3.142725] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.147137] [drm] Connector 1:
[ 3.150288] [drm] VGA-1
[ 3.152994] [drm] HPD2
[ 3.155647] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.163296] [drm] Encoders:
[ 3.166385] [drm] CRT1: INTERNAL_UNIPHY2
[ 3.170817] [drm] CRT1: NUTMEG
[ 3.176559] usb 3-3: New USB device found, idVendor=0bda, idProduct=0184
[ 3.183585] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.190992] usb 3-3: Product: USB2.0-CRW
[ 3.191031] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.200645] usb 3-3: Manufacturer: Generic
[ 3.204907] usb 3-3: SerialNumber: 20100818841300000
[ 3.215728] Initializing USB Mass Storage driver...
[ 3.220874] scsi6 : usb-storage 3-3:1.0
[ 3.224952] usbcore: registered new interface driver usb-storage
[ 3.231172] USB Mass Storage support registered.
[ 3.237236] [drm] Internal thermal controller without fan control
[ 3.243563] [drm] radeon: power management initialized
[ 3.363796] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.370359] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.377014] ata1.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[ 3.384140] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.391557] ata2.00: ATAPI: PLDS DVD-RW DH16ACSH, JL3B, max UDMA/100
[ 3.399977] ata1.00: configured for UDMA/100
[ 3.404625] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 19.0 PQ: 0 ANSI: 5
[ 3.408454] [drm] fb mappable at 0xD114C000
[ 3.408455] [drm] vram apper at 0xD0000000
[ 3.408455] [drm] size 5242880
[ 3.408456] [drm] fb depth is 24
[ 3.408456] [drm] pitch is 5120
[ 3.408526] fbcon: radeondrmfb (fb0) is primary device
[ 3.408603] ata2.00: configured for UDMA/100
[ 3.446964] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DH16ACSH JL3B PQ: 0 ANSI: 5
[ 3.451441] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.451495] sd 0:0:0:0: [sda] Write Protect is off
[ 3.451513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.456285] sda: sda1 sda2
[ 3.456532] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.458426] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.458427] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.461085] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.461121] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.568412] Console: switching to colour frame buffer device 160x64
[ 3.641649] fb0: radeondrmfb frame buffer device
[ 3.646454] drm: registered panic notifier
[ 3.650730] [drm] Initialized radeon 2.24.0 20080528 for 0000:00:01.0 on minor 0
[ 3.658455] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 3.663898] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 3.671782] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 3.677829] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.684892] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.692398] usb usb5: Product: xHCI Host Controller
[ 3.697465] usb usb5: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 3.704067] usb usb5: SerialNumber: 0000:00:10.1
[ 3.708978] hub 5-0:1.0: USB hub found
[ 3.712880] hub 5-0:1.0: 2 ports detected
[ 3.717107] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 3.722512] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 3.730185] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.737252] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.744760] usb usb6: Product: xHCI Host Controller
[ 3.749836] usb usb6: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 3.756402] usb usb6: SerialNumber: 0000:00:10.1
[ 3.761306] hub 6-0:1.0: USB hub found
[ 3.765204] hub 6-0:1.0: 2 ports detected
[ 3.769478] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.775065] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 3.783017] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 3.846889] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.853946] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.861439] usb usb7: Product: OHCI Host Controller
[ 3.866515] usb usb7: Manufacturer: Linux 3.7-trunk-686-pae ohci_hcd
[ 3.873089] usb usb7: SerialNumber: 0000:00:12.0
[ 3.878040] hub 7-0:1.0: USB hub found
[ 3.881931] hub 7-0:1.0: 5 ports detected
[ 3.886182] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.891591] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 3.899243] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 3.962687] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.969733] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.977219] usb usb8: Product: OHCI Host Controller
[ 3.982253] usb usb8: Manufacturer: Linux 3.7-trunk-686-pae ohci_hcd
[ 3.988836] usb usb8: SerialNumber: 0000:00:13.0
[ 3.993779] hub 8-0:1.0: USB hub found
[ 3.997684] hub 8-0:1.0: 5 ports detected
[ 4.001940] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.007359] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 4.015039] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 4.030559] usb 5-2: new low-speed USB device number 2 using xhci_hcd
[ 4.078464] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.085523] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.087601] usb 5-2: New USB device found, idVendor=04b3, idProduct=3025
[ 4.087608] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.087612] usb 5-2: Product: USB NetVista Full Width Keyboard
[ 4.087615] usb 5-2: Manufacturer: CHICONY
[ 4.087871] usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.126676] usb usb9: Product: OHCI Host Controller
[ 4.131725] usb usb9: Manufacturer: Linux 3.7-trunk-686-pae ohci_hcd
[ 4.138306] usb usb9: SerialNumber: 0000:00:14.5
[ 4.143206] hub 9-0:1.0: USB hub found
[ 4.147114] hub 9-0:1.0: 2 ports detected
[ 4.163535] usbcore: registered new interface driver usbhid
[ 4.169315] usbhid: USB HID core driver
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting[ 4.193619] device-mapper: uevent: version 1.0.3
root file syste[ 4.199025] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
m ... Begin: Running /scripts/local-top ... [ 4.224483] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.234580] bio: create slab <bio-1> at 1
[ 4.238792] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.249941] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.261301] scsi 6:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 4.272524] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/M.S.PRO 1.00 PQ: 0 ANSI: 0 CCS
[ 4.281877] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.286612] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.293356] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 4.299663] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 4.305483] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 4.311343] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 4.319534] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 4.364567] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 4.373056] sd 6:0:0:3: [sde] Attached SCSI removable disk
done.
[ 4.381033] sd 6:0:0:4: [sdf] Attached SCSI removable disk
Begin: Running /[ 4.387827] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 4.411895] kjournald starting. Commit interval 5 seconds
[ 4.411922] EXT3-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[539]: spec[ 5.515200] udev[540]: starting version 164
ified group 'arduino' unknown
.
Synthesizing the initial hotplug events...done.
udevd[540]: specified group 'arduino' unknown
Waiting for /dev to be fully populated...[ 5.896805] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.932563] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.940684] ipmi message handler version 39.2
[ 5.997526] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:10.1/usb5/5-2/5-2:1.0/input/input3
[ 6.009387] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:10.1-2/input0
[ 6.135036] IPMI System Interface driver.
[ 6.139309] ipmi_si 0000:03:00.3: probing via PCI
[ 6.144227] ipmi_si 0000:03:00.3: [io 0xe000-0xe0ff] regsize 1 spacing 1 irq 17
[ 6.151986] ipmi_si: Adding PCI-specified kcs state machine
[ 6.157823] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0xe000, slave address 0x0, irq 17
[ 6.180777] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.246438] tpm_tis 00:0b: TPM is disabled/deactivated (0x6)
[ 6.645823] kvm: Nested Virtualization enabled
[ 6.650429] kvm: Nested Paging enabled
[ 6.689926] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.707173] hda-intel: Force to non-snoop mode
[ 6.735315] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 6.834541] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 6.843666] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 6.853361] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 6.862903] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 6.872963] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A^[[A\A^CSetting preliminary keymap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-root: clean, 133926/249984 fil[ 39.438026] EXT3-fs (dm-0): using internal journal
es, 917058/999424 blocks
done.
Cleaning up ifupdown....
[ 39.587646] loop: module loaded
Loading kernel modules...done.
Setting up networking....
[ 39.771450] RPC: Registered named UNIX socket transport module.
[ 39.777651] RPC: Registered udp transport module.
[ 39.782605] RPC: Registered tcp transport module.
[ 39.787569] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 39.851767] Key type dns_resolver registered
[ 39.859446] FS-Cache: Loaded
[ 39.881070] FS-Cache: Netfs 'nfs' registered for caching
[ 39.940783] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
hostname: Name or service not known
Starting NFS common utilities:mount: mount point /var/lib/nfs/rpc_pipefs does not exist
.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "krazy" using metadata type lvm2
5 logical volume(s) in volume group "krazy" now active
.
Activating lvm and md swap...[ 40.405982] Adding 499708k swap on /dev/mapper/krazy-swap_1. Priority:-1 extents:1 across:499708k
done.
Checking file systems...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/sda1: clean, 241/62248 files, 106900/248832 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-home: clean, 689/29859840 files, 1925467/119409664 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-tmp: clean, 16/62464 files, 8342/249856 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-var: clean, 8258/312624 files, 155526/1249280 blocks
done.
Mounting local filesystems...[ 41.345364] kjournald starting. Commit interval 5 seconds
[ 41.351182] EXT3-fs (sda1): using internal journal
[ 41.356235] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 41.409920] kjournald starting. Commit interval 5 seconds
[ 41.410516] EXT3-fs (dm-4): using internal journal
[ 41.410519] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 41.446883] kjournald starting. Commit interval 5 seconds
[ 41.452692] EXT3-fs (dm-2): using internal journal
[ 41.457743] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 41.506507] kjournald starting. Commit interval 5 seconds
[ 41.506804] EXT3-fs (dm-3): using internal journal
[ 41.506807] EXT3-fs (dm-3): mounted filesystem with ordered data mode
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...[ 41.940401] NET: Registered protocol family 3
[ 41.960213] NET: Registered protocol family 6
[ 41.980222] NET: Registered protocol family 11
[ 41.998877] NET: Registered protocol family 4
[ 42.028815] NET: Registered protocol family 5
done.
Cleaning up temporary files....
Setting up ALSA...done.
[ 42.317934] fuse init (API version 7.20)
Setting console screen modes.
]Rcannot (un)set powersave mode
[9;30][14;30]Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...[ 42.659720] r8169 0000:03:00.0 eth0: link down
[ 42.659738] r8169 0000:03:00.0 eth0: link down
[ 42.669172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
Setting kernel variables ...done.
rpcbind: Cannot open '/var/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory)
rpcbind: Cannot open '/var/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory)
Starting rpcbind daemon....
startpar: service(s) returned failure: udev ... [31mfailed![3
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
cachefilesd disabled, please set RUN=yes in /etc/default/cachefilesd ... [31mfailed![39;49m
Starting rpcbind daemon...Already running..
Starting enhanced syslogd: rsyslogd.
hostname: Name or service not known
Starting NFS common utilities: idmapd gssd svcgssd [31mfailed![39;49m
Starting system message bus: dbus.
[ 44.098040] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
Starting acpi_fakekey daemon...done.
Starting GNOME Display Manager: gdm3.
Checking battery state...done.
Starting ACPI services....
Starting anac(h)ronistic cron: anacron.
Starting deferred execution scheduler: atd.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting bluetooth: bluetoothd[ 45.426501] r8169 0000:03:00.0 eth0: link up
[ 45.431043] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 45.513160] Bluetooth: Core ver 2.16
[ 45.516968] NET: Registered protocol family 31
[ 45.521680] Bluetooth: HCI device and connection manager initialized
[ 45.528461] Bluetooth: HCI socket layer initialized
[ 45.533569] Bluetooth: L2CAP socket layer initialized
[ 45.538809] Bluetooth: SCO socket layer initialized
[ 45.545809] Bluetooth: RFCOMM TTY layer initialized
[ 45.550893] Bluetooth: RFCOMM socket layer initialized
[ 45.556251] Bluetooth: RFCOMM ver 1.11
[ 45.576739] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 45.582337] Bluetooth: BNEP filters: protocol multicast
[ 45.587828] Bluetooth: BNEP socket layer initialized
.
[ 45.720779] Bridge firewalling registered
Starting periodic command scheduler: cron.
Starting Hardware abstraction layer: hald[ 47.905062] NFS: Registering the id_resolver key type
[ 47.910469] Key type id_resolver registered
[ 47.914916] Key type id_legacy registered
.
Starting NTP server: ntpd.
Starting Postfix Mail Transport Agent: postfix.
Starting OpenBSD Secure Shell server: sshd[ 50.338628] sshd (2437): /proc/2437/oom_adj is deprecated, please use /proc/2437/oom_score_adj instead.
.
Stopping the hotplug events dispatcher: udevd[ 53.100822] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
.
Starting the hotplug events dispatcher: udevd[ 55.670921] udev[2556]: starting version 164
.
startpar: service(s) returned failure: nfs-common ... [31mfailed![39;49m
[ 241.926360] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 241.952840] JFS: nTxBlock = 8192, nTxLock = 65536
[ 241.974961] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 242.029974] QNX4 filesystem 0.2.3 registered.
[ 242.070693] Btrfs loaded
Switching to runlevel: 6
INIT: Sending processes the TERM signal
Using makefile-style concurrent boot in runlevel 6.
Stopping rpcbind daemon....
Stopping deferred execution scheduler: atd.
Stopping anac(h)ronistic cron: anacron.
cachefilesd disabled, please set RUN=yes in /etc/default/cachefilesd ... [31mfailed![39;49m
Stopping bluetooth: bluetoothd.
Stopping Postfix Mail Transport Agent: postfix.
Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Stopping GNOME Display Manager: gdm3.
Shutting down ALSA...done.
Asking all remaining processes to terminate...done.
Currently running processes (pstree):
init-+-modprobe
|-rc---startpar---sendsigs---pstree
`-rsyslogd---3*[{rsyslogd}]
Killing all remaining processes...[31mfailed.[39;49m
Stopping enhanced syslogd: rsyslogd.
Stopping NFS common utilities: svcgssd gssd idmapd.
Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/74:27:ea:32:37:7e
Sending on LPF/eth0/74:27:ea:32:37:7e
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.23.84 port 67
done.
Cleaning up ifupdown....
Saving the system clock.
Deactivating swap...done.
Unmounting local filesystems...umount2: Device or resource busy
umount: /dev/mapper/krazy-var busy - remounted read-only
done.
Shutting down LVM Volume Groups Can't deactivate volume group "krazy" with 2 open logical volume(s)
[31mfailed![39;49m
Will now restart.
[ 702.029053] kvm: exiting hardware virtualization
[ 702.235183] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 702.253007] Disabling non-boot CPUs ...
[ 702.263449] Restarting system.
[ 702.266696] reboot: machine restart
�[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8-1~experimental.1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ada17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ada18000-0x00000000adcf7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000adcf8000-0x00000000add02fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000add03000-0x00000000ae928fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae929000-0x00000000aee91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aee92000-0x00000000aee92fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aee93000-0x00000000af098fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af099000-0x00000000af4bffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af4c0000-0x00000000af7f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af7f2000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [c00fd870]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] RAMDISK: [mem 0x370ca000-0x37feffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x361a4000-0x370c9091]
[ 0.000000] Move RAMDISK from [mem 0x370ca000-0x37fef091] to [mem 0x361a4000-0x370c9091]
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT adcfa080 00084 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FACP add00b40 0010C (v05 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT adcfa198 069A2 (v02 LENOVO TC-9Z 00001210 INTL 20051117)
[ 0.000000] ACPI: FACS ae920080 00040
[ 0.000000] ACPI: APIC add00c50 00072 (v03 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: FPDT add00cc8 00044 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: TCPA add00d10 00032 (v02 LENOVO TC-9Z 00001210 MSFT 01000013)
[ 0.000000] ACPI: MCFG add00d48 0003C (v01 LENOVO TC-9Z 00001210 MSFT 00010013)
[ 0.000000] ACPI: SLIC add00d88 00176 (v01 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: BGRT add00f00 00038 (v00 LENOVO TC-9Z 00001210 AMI 00010013)
[ 0.000000] ACPI: SSDT add00f38 00C04 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: SSDT add01b40 004B7 (v02 LENOVO TC-9Z 00001210 MSFT 04000000)
[ 0.000000] ACPI: IVRS add01ff8 00070 (v02 LENOVO TC-9Z 00001210 AMD 00000000)
[ 0.000000] ACPI: CRAT add02068 002A8 (v01 LENOVO TC-9Z 00001210 AMD 00000001)
[ 0.000000] ACPI: HPET add02310 00038 (v01 LENOVO TC-9Z 00001210 AMI 00000005)
[ 0.000000] 3974MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0x2fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xada17fff]
[ 0.000000] node 0: [mem 0xaee92000-0xaee92fff]
[ 0.000000] node 0: [mem 0xaf099000-0xaf4bffff]
[ 0.000000] node 0: [mem 0xaf7f2000-0xaf7fffff]
[ 0.000000] node 0: [mem 0x00001000-0x2fffffff]
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xaf800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33792 r0 d23552 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 899034
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-trunk-686-pae root=/dev/mapper/krazy-root ro verbose console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:00130000)
[ 0.000000] Memory: 3573908k/4980736k available (3034k kernel code, 61144k reserved, 1530k data, 436k init, 2724156k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1476000 - 0xc14e3000 ( 436 kB)
[ 0.000000] .data : 0xc12f68de - 0xc1475300 (1530 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12f68de (3034 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3194.133 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.26 BogoMIPS (lpj=12776532)
[ 0.010699] pid_max: default: 32768 minimum: 301
[ 0.015331] Security Framework initialized
[ 0.019429] AppArmor: AppArmor disabled by boot time parameter
[ 0.025266] Mount-cache hash table entries: 512
[ 0.029919] Initializing cgroup subsys cpuacct
[ 0.034360] Initializing cgroup subsys memory
[ 0.038723] Initializing cgroup subsys devices
[ 0.043165] Initializing cgroup subsys freezer
[ 0.047602] Initializing cgroup subsys net_cls
[ 0.052042] Initializing cgroup subsys blkio
[ 0.056313] Initializing cgroup subsys perf_event
[ 0.061028] CPU: Physical Processor ID: 0
[ 0.065034] CPU: Processor Core ID: 0
[ 0.068695] mce: CPU supports 7 MCE banks
[ 0.072719] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.072719] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.072719] tlb_flushall_shift: 5
[ 0.087953] Freeing SMP alternatives: 8k freed
[ 0.092632] ACPI: Core revision 20121018
[ 0.114380] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.120073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.165680] smpboot: CPU0: AMD A8-5500B APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.281141] Performance Events:
[ 0.284187] perf: AMD core performance counters detected
[ 0.289695] AMD PMU driver.
[ 0.292484] ... version: 0
[ 0.296490] ... bit width: 48
[ 0.300583] ... generic registers: 6
[ 0.304588] ... value mask: 0000ffffffffffff
[ 0.309892] ... max period: 00007fffffffffff
[ 0.315194] ... fixed-purpose events: 0
[ 0.319198] ... event mask: 000000000000003f
[ 0.324651] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.332703] smpboot: Booting Node 0, Processors #1[ 0.347673] Initializing CPU#1
[ 0.353161] #2[ 0.364665] Initializing CPU#2
[ 0.370106] #3 OK
[ 0.382063] Initializing CPU#3
[ 0.387209] Brought up 4 CPUs
[ 0.390177] smpboot: Total of 4 processors activated (25553.06 BogoMIPS)
[ 0.397800] devtmpfs: initialized
[ 0.401285] PM: Registering ACPI NVS region [mem 0xadd03000-0xae928fff] (12738560 bytes)
[ 0.409534] PM: Registering ACPI NVS region [mem 0xaee93000-0xaf098fff] (2121728 bytes)
[ 0.417644] regulator-dummy: no parameters
[ 0.421793] NET: Registered protocol family 16
[ 0.426348] ACPI: bus type pci registered
[ 0.430401] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.439684] PCI: not using MMCONFIG
[ 0.448499] PCI: Using configuration type 1 for base access
[ 0.454060] PCI: Using configuration type 1 for extended access
[ 0.460527] bio: create slab <bio-0> at 0
[ 0.464635] ACPI: Added _OSI(Module Device)
[ 0.468819] ACPI: Added _OSI(Processor Device)
[ 0.473257] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.477953] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.484874] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.493451] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.499937] ACPI: Interpreter enabled
[ 0.503597] ACPI: (supports S0 S3 S4 S5)
[ 0.507622] ACPI: Using IOAPIC for interrupt routing
[ 0.512689] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.522004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.530678] PCI: Using MMCONFIG for extended config space
[ 0.542565] ACPI: No dock devices found.
[ 0.546486] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.555718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.562129] pci_root PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.568577] pci_root PNP0A03:00: ACPI _OSC control (0x1d) granted
[ 0.574850] PCI host bridge to bus 0000:00
[ 0.578941] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.584417] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.590583] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.596752] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.602918] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.609086] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.615946] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.622805] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.631259] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode)
[ 0.638090] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.649342] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.659074] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.665978] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.672883] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.679783] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.686678] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.693567] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.700449] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.707335] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.714290] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.722371] vgaarb: loaded
[ 0.725080] vgaarb: bridge control possible 0000:00:01.0
[ 0.730421] PCI: Using ACPI for IRQ routing
[ 0.741575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.746550] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.754394] Switching to clocksource hpet
[ 0.759588] pnp: PnP ACPI init
[ 0.762654] ACPI: bus type pnp registered
[ 0.766740] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.773716] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.779628] system 00:01: [io 0x040b] has been reserved
[ 0.784939] system 00:01: [io 0x04d6] has been reserved
[ 0.790250] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.796167] system 00:01: [io 0x0c14] has been reserved
[ 0.801477] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.807396] system 00:01: [io 0x0c52] has been reserved
[ 0.812707] system 00:01: [io 0x0c6c] has been reserved
[ 0.818017] system 00:01: [io 0x0c6f] has been reserved
[ 0.823329] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.829247] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.835163] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.841079] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.846998] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.852913] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.858822] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.864740] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.870654] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.876565] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.882483] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.889436] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.896045] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.902654] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.909263] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.915873] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.922483] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.929212] system 00:02: [io 0x0e80-0x0eaf] has been reserved
[ 0.935129] system 00:02: [io 0x0eb0-0x0ebf] has been reserved
[ 0.941044] system 00:02: [io 0x0f40-0x0f4f] has been reserved
[ 0.947483] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.953547] system 00:0b: [mem 0xb0000000-0xcfffffff] has been reserved
[ 0.960213] system 00:0c: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.966961] pnp: PnP ACPI: found 14 devices
[ 0.971141] ACPI: ACPI bus type pnp unregistered
[ 0.975760] PnPBIOS: Disabled by ACPI PNP
[ 1.016151] pci 0000:00:14.4: PCI bridge to [bus 09]
[ 1.021123] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 1.026094] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 1.031054] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 1.037148] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.044038] NET: Registered protocol family 2
[ 1.048545] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.055605] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.062054] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.068412] TCP: reno registered
[ 1.071643] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.077561] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.083962] NET: Registered protocol family 1
[ 1.329454] Unpacking initramfs...
[ 1.633453] Freeing initrd memory: 15512k freed
[ 1.641567] LVT offset 0 assigned for vector 0x400
[ 1.646382] perf: AMD IBS detected (0x000000ff)
[ 1.651103] audit: initializing netlink socket (disabled)
[ 1.656506] type=2000 audit(1362594255.472:1): initialized
[ 1.673297] bounce pool size: 64 pages
[ 1.677049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.683841] VFS: Disk quotas dquot_6.5.2
[ 1.687788] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.694373] msgmni has been set to 1689
[ 1.698444] alg: No test for stdrng (krng)
[ 1.702575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.710006] io scheduler noop registered
[ 1.713931] io scheduler deadline registered
[ 1.718216] io scheduler cfq registered (default)
[ 1.723188] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.730153] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.737108] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.743629] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 1.750142] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[ 1.756658] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[ 1.763193] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.768771] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.775375] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.782030] GHES: HEST is not enabled!
[ 1.785790] isapnp: Scanning for PnP cards...
[ 2.142757] isapnp: No Plug & Play device found
[ 2.147350] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[ 2.174289] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.180369] Linux agpgart interface v0.103
[ 2.184806] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.192029] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.197005] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.202185] mousedev: PS/2 mouse device common for all mice
[ 2.207794] rtc_cmos 00:05: RTC can wake from S4
[ 2.212515] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.218621] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.225409] cpuidle: using governor ladder
[ 2.229503] cpuidle: using governor menu
[ 2.233459] drop_monitor: Initializing network drop monitor service
[ 2.239789] TCP: cubic registered
[ 2.243158] NET: Registered protocol family 10
[ 2.247751] mip6: Mobile IPv6
[ 2.250718] NET: Registered protocol family 17
[ 2.255387] Using IPI No-Shortcut mode
[ 2.259248] registered taskstats version 1
[ 2.263912] rtc_cmos 00:05: setting system clock to 2013-03-06 18:24:17 UTC (1362594257)
[ 2.272301] Freeing unused kernel memory: 436k freed
[ 2.277610] Write protecting the kernel text: 3036k
[ 2.282732] Write protecting the kernel read-only data: 1220k
[ 2.288731] NX-protecting the kernel data: 3108k
Loading, please wait...
[ 2.306719] udev[68]: starting version 164
[ 2.317507] ACPI: bus type usb registered
[ 2.321890] usbcore: registered new interface driver usbfs
[ 2.327837] usbcore: registered new interface driver hub
[ 2.333561] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.333619] usbcore: registered new device driver usb
[ 2.347828] [drm] Initialized drm 1.1.0 20060810
[ 2.347836] ACPI: Power Button [PWRB]
[ 2.348013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.348020] ACPI: Power Button [PWRF]
[ 2.368920] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.374494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.374713] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.375069] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 2.375587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.375593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.375597] usb usb1: Product: xHCI Host Controller
[ 2.375601] usb usb1: Manufacturer: Linux 3.8-trunk-686-pae xhci_hcd
[ 2.375609] usb usb1: SerialNumber: 0000:00:10.0
[ 2.375767] hub 1-0:1.0: USB hub found
[ 2.375775] hub 1-0:1.0: 2 ports detected
[ 2.375860] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.375864] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.378369] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.378371] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.378372] usb usb2: Product: xHCI Host Controller
[ 2.378374] usb usb2: Manufacturer: Linux 3.8-trunk-686-pae xhci_hcd
[ 2.378375] usb usb2: SerialNumber: 0000:00:10.0
[ 2.378476] hub 2-0:1.0: USB hub found
[ 2.378483] hub 2-0:1.0: 2 ports detected
[ 2.487630] microcode: CPU0: patch_level=0x06001116
[ 2.492894] platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
[ 2.503563] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.509581] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.509588] microcode: CPU0: new patch_level=0x06001119
[ 2.509740] microcode: CPU1: patch_level=0x06001116
[ 2.525634] microcode: CPU2: patch_level=0x00000000
[ 2.536817] microcode: CPU2: new patch_level=0x06001119
[ 2.542456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.543324] r8169 0000:03:00.0 eth0: RTL8168dp/8111dp at 0xf8238000, 74:27:ea:32:37:7e, XID 08b00000 IRQ 47
[ 2.543326] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.543349] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.543614] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 2.543874] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.543876] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.543877] usb usb3: Product: xHCI Host Controller
[ 2.543879] usb usb3: Manufacturer: Linux 3.8-trunk-686-pae xhci_hcd
[ 2.543880] usb usb3: SerialNumber: 0000:00:10.1
[ 2.543992] hub 3-0:1.0: USB hub found
[ 2.543999] hub 3-0:1.0: 2 ports detected
[ 2.544080] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.544084] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 2.545668] microcode: CPU3: patch_level=0x00000000
[ 2.545788] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.547384] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.547386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.547387] usb usb4: Product: xHCI Host Controller
[ 2.547389] usb usb4: Manufacturer: Linux 3.8-trunk-686-pae xhci_hcd
[ 2.547390] usb usb4: SerialNumber: 0000:00:10.1
[ 2.547490] hub 4-0:1.0: USB hub found
[ 2.547497] hub 4-0:1.0: 2 ports detected
[ 2.692087] [drm] radeon kernel modesetting enabled.
[ 2.692113] tsc: Refined TSC clocksource calibration: 3194.030 MHz
[ 2.692124] Switching to clocksource tsc
[ 2.709262] SCSI subsystem initialized
[ 2.714270] ACPI: bus type scsi registered
[ 2.719105] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9904 0x17AA:0x3089).
[ 2.727739] [drm] register mmio base: 0xFEB00000
[ 2.732712] [drm] register mmio size: 262144
[ 2.737495] ATOM BIOS: 113
[ 2.740381] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.749422] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 2.757636] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.762619] [drm] RAM width 64bits DDR
[ 2.766599] [TTM] Zone kernel: Available graphics memory: 432854 kiB
[ 2.773321] [TTM] Zone highmem: Available graphics memory: 1794932 kiB
[ 2.780087] [TTM] Initializing pool allocator
[ 2.784606] [TTM] Initializing DMA pool allocator
[ 2.789528] [drm] radeon: 512M of VRAM memory ready
[ 2.794593] [drm] radeon: 512M of GTT memory ready.
[ 2.799675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.806548] [drm] Driver supports precise vblank timestamp query.
[ 2.812954] radeon 0000:00:01.0: radeon: using MSI.
[ 2.818292] [drm] radeon: irq initialized.
[ 2.822556] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.829518] [drm] Loading ARUBA Microcode
[ 2.833714] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_pfp.bin into memory
[ 2.842240] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_me.bin into memory
[ 2.850681] platform radeon_cp.0: firmware: agent loaded radeon/ARUBA_rlc.bin into memory
[ 2.890199] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.897409] radeon 0000:00:01.0: WB enabled
[ 2.901757] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffa70c00
[ 2.912258] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffa70c04
[ 2.922754] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffa70c08
[ 2.926408] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 2.939889] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffa70c0c
[ 2.950375] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffa70c10
[ 2.979625] [drm] ring test on 0 succeeded in 2 usecs
[ 2.984872] usb 3-2: New USB device found, idVendor=04b3, idProduct=3025
[ 2.984918] [drm] ring test on 3 succeeded in 0 usecs
[ 2.984929] [drm] ring test on 4 succeeded in 1 usecs
[ 2.994206] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.994776] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.995342] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.996605] [drm] Radeon Display Connectors
[ 2.996606] [drm] Connector 0:
[ 2.996607] [drm] DP-1
[ 2.996607] [drm] HPD1
[ 2.996609] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.996610] [drm] Encoders:
[ 2.996611] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.996611] [drm] Connector 1:
[ 2.996612] [drm] VGA-1
[ 2.996612] [drm] HPD2
[ 2.996614] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.996614] [drm] Encoders:
[ 2.996614] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.996615] [drm] CRT1: NUTMEG
[ 3.047476] [drm] Internal thermal controller without fan control
[ 3.047493] [drm] radeon: power management initialized
[ 3.087718] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.095124] usb 3-2: Product: USB NetVista Full Width Keyboard
[ 3.101203] usb 3-2: Manufacturer: CHICONY
[ 3.105566] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.131042] usbcore: registered new interface driver usbhid
[ 3.136856] usbhid: USB HID core driver
[ 3.212228] [drm] fb mappable at 0xD114C000
[ 3.216611] [drm] vram apper at 0xD0000000
[ 3.220856] [drm] size 5242880
[ 3.224048] [drm] fb depth is 24
[ 3.227395] [drm] pitch is 5120
[ 3.231007] fbcon: radeondrmfb (fb0) is primary device
[ 3.362712] Console: switching to colour frame buffer device 160x64
[ 3.373741] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.380459] radeon 0000:00:01.0: registered panic notifier
[ 3.386180] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[ 3.393941] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.399377] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 3.407046] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 3.469378] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.476444] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.483942] usb usb5: Product: OHCI Host Controller
[ 3.489003] usb usb5: Manufacturer: Linux 3.8-trunk-686-pae ohci_hcd
[ 3.495603] usb usb5: SerialNumber: 0000:00:12.0
[ 3.500539] hub 5-0:1.0: USB hub found
[ 3.504473] hub 5-0:1.0: 5 ports detected
[ 3.508763] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.514181] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 3.521873] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 3.585161] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.592205] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.599722] usb usb6: Product: OHCI Host Controller
[ 3.604799] usb usb6: Manufacturer: Linux 3.8-trunk-686-pae ohci_hcd
[ 3.611420] usb usb6: SerialNumber: 0000:00:13.0
[ 3.616353] hub 6-0:1.0: USB hub found
[ 3.620248] hub 6-0:1.0: 5 ports detected
[ 3.624532] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.629969] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 3.637687] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 3.700946] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.708009] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.715539] usb usb7: Product: OHCI Host Controller
[ 3.720631] usb usb7: Manufacturer: Linux 3.8-trunk-686-pae ohci_hcd
[ 3.727257] usb usb7: SerialNumber: 0000:00:14.5
[ 3.732201] hub 7-0:1.0: USB hub found
[ 3.736119] hub 7-0:1.0: 2 ports detected
[ 3.740501] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x23 impl SATA mode
[ 3.749020] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 3.758245] scsi0 : ahci
[ 3.760953] scsi1 : ahci
[ 3.763655] scsi2 : ahci
[ 3.766353] scsi3 : ahci
[ 3.769066] scsi4 : ahci
[ 3.771756] scsi5 : ahci
[ 3.774422] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 54
[ 3.782129] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 54
[ 3.789861] ata3: DUMMY
[ 3.792411] ata4: DUMMY
[ 3.794954] ata5: DUMMY
[ 3.797499] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 54
[ 3.864642] usb 5-3: new full-speed USB device number 2 using ohci_hcd
[ 4.032360] usb 5-3: not running at top speed; connect to a high speed hub
[ 4.054329] usb 5-3: New USB device found, idVendor=0bda, idProduct=0184
[ 4.061312] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.068723] usb 5-3: Product: USB2.0-CRW
[ 4.072811] usb 5-3: Manufacturer: Generic
[ 4.077068] usb 5-3: SerialNumber: 20100818841300000
[ 4.092324] Initializing USB Mass Storage driver...
[ 4.097518] scsi6 : usb-storage 5-3:1.0
[ 4.101633] usbcore: registered new interface driver usb-storage
[ 4.107872] USB Mass Storage support registered.
[ 4.124169] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.299837] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.306309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.312791] ata2.00: ATAPI: PLDS DVD-RW DH16ACSH, JL3B, max UDMA/100
[ 4.319657] ata1.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[ 4.326930] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.335001] ata2.00: configured for UDMA/100
[ 4.339789] ata1.00: configured for UDMA/100
[ 4.344366] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 19.0 PQ: 0 ANSI: 5
[ 4.354324] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DH16ACSH JL3B PQ: 0 ANSI: 5
[ 4.366385] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.374243] sd 0:0:0:0: [sda] Write Protect is off
[ 4.379231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.385146] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.385152] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.404110] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.409682] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.413941] sda: sda1 sda2
[ 4.414225] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting[ 4.730312] device-mapper: uevent: version 1.0.3
root file syste[ 4.735787] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
m ... Begin: Running /scripts/local-top ... [ 4.762581] bio: create slab <bio-1> at 1
done.
Begin: Running /[ 4.891029] PM: Starting manual resume from disk
scripts/local-premount ... done.
[ 4.920355] kjournald starting. Commit interval 5 seconds
[ 4.920378] EXT3-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 5.105398] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 5.118362] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 5.131337] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.144321] scsi 6:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 5.157292] scsi 6:0:0:4: Direct-Access Generic- SD/MMC/M.S.PRO 1.00 PQ: 0 ANSI: 0 CCS
[ 5.166707] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5.172393] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 5.178084] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 5.183712] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 5.189337] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 5.258085] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.278048] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 5.301015] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 5.311004] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 5.323976] sd 6:0:0:4: [sdf] Attached SCSI removable disk
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[515]: spec[ 6.073512] udev[516]: starting version 164
ified group 'arduino' unknown
.
Synthesizing the initial hotplug events...done.
udevd[516]: specified group 'arduino' unknown
Waiting for /dev to be fully populated...[ 6.371096] ehci-pci: EHCI PCI platform driver
[ 6.375760] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 6.381277] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 8
[ 6.389348] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.397402] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 6.406504] ehci-pci 0000:00:12.2: debug port 1
[ 6.411243] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 6.417167] usb 5-3: USB disconnect, device number 2
[ 6.427868] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 6.433892] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.440947] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.448439] usb usb8: Product: EHCI Host Controller
[ 6.453500] usb usb8: Manufacturer: Linux 3.8-trunk-686-pae ehci_hcd
[ 6.460113] usb usb8: SerialNumber: 0000:00:12.2
[ 6.465082] hub 8-0:1.0: USB hub found
[ 6.468994] hub 8-0:1.0: 5 ports detected
[ 6.473292] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 6.478763] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 6.486537] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 6.495601] ehci-pci 0000:00:13.2: debug port 1
[ 6.500421] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 6.515690] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 6.521716] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.528896] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.536679] ipmi message handler version 39.2
[ 6.536681] usb usb9: Product: EHCI Host Controller
[ 6.536690] usb usb9: Manufacturer: Linux 3.8-trunk-686-pae ehci_hcd
[ 6.536698] usb usb9: SerialNumber: 0000:00:13.2
[ 6.536999] hub 9-0:1.0: USB hub found
[ 6.537003] hub 9-0:1.0: 5 ports detected
[ 6.569387] IPMI System Interface driver.
[ 6.573734] ipmi_si 0000:03:00.3: probing via PCI
[ 6.573855] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.584872] ipmi_si 0000:03:00.3: [io 0xe000-0xe0ff] regsize 1 spacing 1 irq 17
[ 6.585017] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input3
[ 6.585091] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:10.1-2/input0
[ 6.619247] ipmi_si: Adding PCI-specified kcs state machine
[ 6.625384] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0xe000, slave address 0x0, irq 17
[ 6.636464] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.643522] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 6.783195] usb 8-3: new high-speed USB device number 2 using ehci-pci
[ 6.844271] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 6.860769] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 6.931368] usb 8-3: New USB device found, idVendor=0bda, idProduct=0184
[ 6.938367] usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.945798] usb 8-3: Product: USB2.0-CRW
[ 6.949874] usb 8-3: Manufacturer: Generic
[ 6.954119] usb 8-3: SerialNumber: 20100818841300000
[ 6.963012] scsi7 : usb-storage 8-3:1.0
[ 7.012037] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 7.021267] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 7.030799] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 7.040473] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 7.050649] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 7.195210] kvm: Nested Virtualization enabled
[ 7.199831] kvm: Nested Paging enabled
[ 7.351324] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.967321] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 7.978569] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 7.989795] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 8.001135] scsi 7:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 8.012359] scsi 7:0:0:4: Direct-Access Generic- SD/MMC/M.S.PRO 1.00 PQ: 0 ANSI: 0 CCS
[ 8.022717] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 8.029025] sd 7:0:0:1: Attached scsi generic sg3 type 0
[ 8.036070] sd 7:0:0:2: Attached scsi generic sg4 type 0
[ 8.042039] sd 7:0:0:3: Attached scsi generic sg5 type 0
[ 8.050226] sd 7:0:0:4: Attached scsi generic sg6 type 0
[ 8.089809] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 8.109407] sd 7:0:0:2: [sdd] Attached SCSI removable disk
[ 8.117393] sd 7:0:0:3: [sde] Attached SCSI removable disk
[ 8.135851] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 8.151695] sd 7:0:0:4: [sdf] Attached SCSI removable disk
^CSetting preliminary keymap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-root: clean, 134589/249984 fil[ 40.112941] EXT3-fs (dm-0): using internal journal
es, 928036/999424 blocks
done.
Cleaning up ifupdown....
[ 40.268301] loop: module loaded
Loading kernel modules...done.
Setting up networking....
[ 40.460591] RPC: Registered named UNIX socket transport module.
[ 40.466853] RPC: Registered udp transport module.
[ 40.471833] RPC: Registered tcp transport module.
[ 40.476816] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 40.572520] Key type dns_resolver registered
[ 40.590110] FS-Cache: Loaded
[ 40.635433] FS-Cache: Netfs 'nfs' registered for caching
[ 40.715676] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
hostname: Name or service not known
Starting NFS common utilities:mount: mount point /var/lib/nfs/rpc_pipefs does not exist
.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "krazy" using metadata type lvm2
5 logical volume(s) in volume group "krazy" now active
.
Activating lvm and md swap...[ 41.180686] Adding 499708k swap on /dev/mapper/krazy-swap_1. Priority:-1 extents:1 across:499708k
done.
Checking file systems...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/sda1: clean, 241/62248 files, 113939/248832 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-home: clean, 828/29859840 files, 1937216/119409664 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-tmp: clean, 23/62464 files, 8345/249856 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/mapper/krazy-var: clean, 8364/312624 files, 173274/1249280 blocks
done.
Mounting local filesystems...[ 42.294740] kjournald starting. Commit interval 5 seconds
[ 42.300570] EXT3-fs (sda1): using internal journal
[ 42.305639] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 42.387080] kjournald starting. Commit interval 5 seconds
[ 42.387731] EXT3-fs (dm-4): using internal journal
[ 42.387734] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 42.437889] kjournald starting. Commit interval 5 seconds
[ 42.443700] EXT3-fs (dm-2): using internal journal
[ 42.448735] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 42.471511] kjournald starting. Commit interval 5 seconds
[ 42.477329] EXT3-fs (dm-3): using internal journal
[ 42.482404] EXT3-fs (dm-3): mounted filesystem with ordered data mode
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...[ 43.027048] NET: Registered protocol family 3
[ 43.062983] NET: Registered protocol family 6
[ 43.082180] NET: Registered protocol family 11
[ 43.173614] NET: Registered protocol family 4
[ 43.197807] NET: Registered protocol family 5
done.
Setting kernel variables ...done.
Cleaning up temporary files....
[ 43.443798] fuse init (API version 7.20)
Setting up ALSA...done.
rpcbind: Cannot open '/var/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory)
rpcbind: Cannot open '/var/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory)
Starting rpcbind daemon....
Setting console screen modes.
]Rcannot (un)set powersave mode
[9;30][14;30]Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...done.
startpar: service(s) returned failure: udev ... [31mfailed![3
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
cachefilesd disabled, please set RUN=yes in /etc/default/cachefilesd ... [31mfailed![39;49m
Starting rpcbind daemon...Already running..
Starting enhanced syslogd: rsyslogd.
[ 44.434169] r8169 0000:03:00.0 eth0: link down
[ 44.434205] r8169 0000:03:00.0 eth0: link down
[ 44.443616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Checking battery state...done.
Starting anac(h)ronistic cron: anacron.
Starting ACPI services....
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting NTP server: ntpd.
[ 45.280336] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
Starting acpi_fakekey daemon...done.
Starting system message bus: dbus.
[ 46.511286] sshd (2085): /proc/2085/oom_adj is deprecated, please use /proc/2085/oom_score_adj instead.
Starting OpenBSD Secure Shell server: sshd.
hostname: Name or service not known
Starting NFS common utilities: idmapd gssd svcgssd [31mfailed![39;49m
[ 47.074184] r8169 0000:03:00.0 eth0: link up
[ 47.078722] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting GNOME Display Manager: gdm3.
Starting Postfix Mail Transport Agent: postfix.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting bluetooth: bluetoothd[ 48.428488] Bluetooth: Core ver 2.16
[ 48.432319] NET: Registered protocol family 31
[ 48.437009] Bluetooth: HCI device and connection manager initialized
[ 48.443753] Bluetooth: HCI socket layer initialized
[ 48.448850] Bluetooth: L2CAP socket layer initialized
[ 48.454129] Bluetooth: SCO socket layer initialized
[ 48.530769] Bluetooth: RFCOMM TTY layer initialized
[ 48.535963] Bluetooth: RFCOMM socket layer initialized
[ 48.541404] Bluetooth: RFCOMM ver 1.11
.
[ 48.636003] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.641640] Bluetooth: BNEP filters: protocol multicast
[ 48.647192] Bluetooth: BNEP socket layer initialized
[ 48.784854] Bridge firewalling registered
Starting Hardware abstraction layer: hald[ 50.137081] NFS: Registering the id_resolver key type
[ 50.137090] Key type id_resolver registered
[ 50.137090] Key type id_legacy registered
.
Stopping the hotplug events dispatcher: udevd[ 55.268276] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
.
Starting the hotplug events dispatcher: udevd[ 56.516260] udev[2696]: starting version 164
.
startpar: service(s) returned failure: nfs-common ... [31mfailed![39;49m
Attachment:
signature.asc
Description: OpenPGP digital signature