When the boot works I see a nice /dev/md126 device with a bunch of
partitions:[ 3.504096] md: md127 stopped. [ 3.507032] md: bind<sda> [ 3.508637] md: bind<sdb> [ 3.510070] md: could not open unknown-block(8,3). [ 3.520709] md: md126 stopped. [ 3.522176] md: bind<sdb> [ 3.523570] md: bind<sda> [ 3.525962] md: raid0 personality registered for level 0 [ 3.527585] md/raid0:md126: md_size is 500129792 sectors. [ 3.528903] md: RAID0 configuration for md126 - 1 zone [ 3.530206] md: zone0=[sda/sdb] [ 3.531517] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 3.532841] [ 3.534108] md126: detected capacity change from 0 to 256066453504 [ 3.536741] md126: p1 p2 p3 p4 < p5 p6 > When it fails I see [ 3.452899] md: md127 stopped. [ 3.453703] md: bind<sda3> [ 3.453752] md: could not open unknown-block(8,0). [ 3.453871] md: bind<sdb> [ 3.462045] md: md126 stopped. [ 3.462130] md: bind<sdb> [ 3.462192] md: bind<sda3> [ 3.462976] md: raid0 personality registered for level 0 [ 3.463140] md/raid0:md126: md_size is 500129792 sectors. [ 3.463141] md: RAID0 configuration for md126 - 1 zone [ 3.463142] md: zone0=[sda3/sdb] [ 3.463144] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 3.463145] [ 3.463157] md126: detected capacity change from 0 to 256066453504 [ 3.463897] md126: unknown partition tableNote that mdadm has asked the kernel to make the /dev/md/imsm0 and /dev/md/Volume0 devices out of /dev/sdb and /dev/sda3 instead of /dev/sdb and /dev/sda. So maybe this is a mdadm bug. |
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/coal-root ro init=/bin/systemd [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Sony Corporation VPCZ22AGX/VAIO, BIOS R1010H5 07/28/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a87000, 0x01a87fff] PGTABLE [ 0.000000] BRK [0x01a88000, 0x01a88fff] PGTABLE [ 0.000000] BRK [0x01a89000, 0x01a89fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M [ 0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ae3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9adfffff] page 2M [ 0.000000] [mem 0x9ae00000-0x9ae3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff] [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35252000-0x36920fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony) [ 0.000000] ACPI: XSDT 000000009affe120 000A4 (v01 Sony VAIO 20110728 01000013) [ 0.000000] ACPI: FACP 000000009affb000 000F4 (v04 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: DSDT 000000009afef000 085DF (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: FACS 000000009af6e000 00040 [ 0.000000] ACPI: TCPA 000000009affd000 00032 (v02 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: HPET 000000009affa000 00038 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: APIC 000000009aff9000 0008C (v02 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SLIC 000000009afee000 00176 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: WDAT 000000009afed000 00224 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afec000 00CA6 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: BOOT 000000009afea000 00028 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe8000 0022B (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: ASPT 000000009afe5000 00034 (v07 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe4000 00846 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe3000 00996 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe2000 00EE8 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe1000 002DD (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf6000-0x25fdf9fff] [ 0.000000] [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880257400000-ffff88025e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00100000-0x9ae3efff] [ 0.000000] node 0: [mem 0x9afff000-0x9affffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2075598 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 142 pages reserved [ 0.000000] DMA zone: 3982 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8618 pages used for memmap [ 0.000000] DMA32 zone: 630336 pages, LIFO batch:31 [ 0.000000] Normal zone: 19705 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ae3f000-0x9aebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s85952 r8192 d20544 u262144 [ 0.000000] pcpu-alloc: s85952 r8192 d20544 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047077 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/coal-root ro init=/bin/systemd [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8083664K/8302392K available (4629K kernel code, 659K rwdata, 1576K rodata, 968K init, 928K bss, 218728K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2793.628 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.25 BogoMIPS (lpj=11174512) [ 0.000119] pid_max: default: 32768 minimum: 301 [ 0.000195] Security Framework initialized [ 0.000254] AppArmor: AppArmor disabled by boot time parameter [ 0.000312] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000732] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002202] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002875] Mount-cache hash table entries: 256 [ 0.003066] Initializing cgroup subsys memory [ 0.003130] Initializing cgroup subsys devices [ 0.003187] Initializing cgroup subsys freezer [ 0.003245] Initializing cgroup subsys net_cls [ 0.003302] Initializing cgroup subsys blkio [ 0.003358] Initializing cgroup subsys perf_event [ 0.003433] CPU: Physical Processor ID: 0 [ 0.003489] CPU: Processor Core ID: 0 [ 0.003548] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003548] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003629] mce: CPU supports 7 MCE banks [ 0.003694] CPU0: Thermal monitoring enabled (TM1) [ 0.003757] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003757] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003757] tlb_flushall_shift: 5 [ 0.003931] Freeing SMP alternatives memory: 20K (ffffffff81998000 - ffffffff8199d000) [ 0.005098] ACPI: Core revision 20130517 [ 0.010055] ACPI: All ACPI Tables successfully acquired [ 0.022196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061987] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.062181] TSC deadline timer enabled [ 0.062188] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.062462] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.062536] ... version: 3 [ 0.062592] ... bit width: 48 [ 0.062648] ... generic registers: 4 [ 0.062704] ... value mask: 0000ffffffffffff [ 0.062761] ... max period: 0000ffffffffffff [ 0.062818] ... fixed-purpose events: 3 [ 0.062874] ... event mask: 000000070000000f [ 0.076436] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.063139] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.103594] Brought up 4 CPUs [ 0.103702] smpboot: Total of 4 processors activated (22349.02 BogoMIPS) [ 0.107013] devtmpfs: initialized [ 0.108068] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.108282] NET: Registered protocol family 16 [ 0.108419] ACPI: bus type PCI registered [ 0.108476] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.108585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.108660] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.124146] PCI: Using configuration type 1 for base access [ 0.124727] bio: create slab <bio-0> at 0 [ 0.124875] ACPI: Added _OSI(Module Device) [ 0.124932] ACPI: Added _OSI(Processor Device) [ 0.124989] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.125046] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126143] ACPI: EC: Look up EC in DSDT [ 0.127149] ACPI: Executed 1 blocks of module-level executable AML code [ 0.135728] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.138437] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20110728 INTL 20100121) [ 0.138856] ACPI: Dynamic OEM Table Load: [ 0.138990] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20110728 INTL 20100121) [ 0.150679] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.151127] ACPI: Dynamic OEM Table Load: [ 0.151261] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.159829] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.160238] ACPI: Dynamic OEM Table Load: [ 0.160371] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.580773] ACPI: Interpreter enabled [ 0.580834] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.580988] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.581149] ACPI: (supports S0 S3 S4 S5) [ 0.581204] ACPI: Using IOAPIC for interrupt routing [ 0.581283] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.581748] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.597894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.597983] \_SB_.PCI0:_OSC invalid UUID [ 0.597984] _OSC request data:1 8 0 [ 0.598011] \_SB_.PCI0:_OSC invalid UUID [ 0.598012] _OSC request data:1 1f 0 [ 0.598015] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.598088] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.598653] PCI host bridge to bus 0000:00 [ 0.598711] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.598770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.598829] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.598890] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.598951] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.599017] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.599082] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.599091] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.599096] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.599100] pci 0000:00:02.0: reg 0x20: [io 0xa000-0xa03f] [ 0.599182] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.599204] pci 0000:00:16.0: reg 0x10: [mem 0xd9404000-0xd940400f 64bit] [ 0.599277] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.599343] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.599642] pci 0000:00:1a.0: reg 0x10: [mem 0xd9409000-0xd94093ff] [ 0.601387] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.601434] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.601525] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.601540] pci 0000:00:1b.0: reg 0x10: [mem 0xd9400000-0xd9403fff 64bit] [ 0.601605] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.601639] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.601726] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.601801] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.601836] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.601924] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.601998] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.602033] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.602118] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.602193] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.602228] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.602313] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.602388] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.602423] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.602516] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.602646] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.602691] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.602781] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.603080] pci 0000:00:1d.0: reg 0x10: [mem 0xd9408000-0xd94083ff] [ 0.604823] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.604868] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.604957] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 0.605110] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.605128] pci 0000:00:1f.2: reg 0x10: [io 0xa088-0xa08f] [ 0.605135] pci 0000:00:1f.2: reg 0x14: [io 0xa094-0xa097] [ 0.605143] pci 0000:00:1f.2: reg 0x18: [io 0xa080-0xa087] [ 0.605151] pci 0000:00:1f.2: reg 0x1c: [io 0xa090-0xa093] [ 0.605158] pci 0000:00:1f.2: reg 0x20: [io 0xa060-0xa07f] [ 0.605166] pci 0000:00:1f.2: reg 0x24: [mem 0xd9407000-0xd94077ff] [ 0.605208] pci 0000:00:1f.2: PME# supported from D3hot [ 0.605261] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.605275] pci 0000:00:1f.3: reg 0x10: [mem 0xd9405000-0xd94050ff 64bit] [ 0.605295] pci 0000:00:1f.3: reg 0x20: [io 0xa040-0xa05f] [ 0.605570] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000 [ 0.605716] pci 0000:02:00.0: reg 0x10: [mem 0xd8400000-0xd8401fff 64bit] [ 0.606411] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.606555] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.612813] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.612873] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.612877] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.612883] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.612970] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.612991] pci 0000:03:00.0: reg 0x10: [mem 0xd7400000-0xd7400fff] [ 0.613146] pci 0000:03:00.0: supports D1 D2 [ 0.613147] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.613177] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.620708] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.620799] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.620803] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.620809] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.620943] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.620969] pci 0000:04:00.0: reg 0x10: [mem 0xd6400000-0xd6401fff 64bit] [ 0.621099] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.621133] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.628771] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.628846] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.628850] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.628856] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.628998] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.629065] pci 0000:05:00.0: reg 0x10: [io 0x6000-0x60ff] [ 0.629184] pci 0000:05:00.0: reg 0x18: [mem 0xd3404000-0xd3404fff 64bit pref] [ 0.629257] pci 0000:05:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref] [ 0.629585] pci 0000:05:00.0: supports D1 D2 [ 0.629586] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.629698] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.636779] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.636858] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.636862] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.636868] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.636966] acpiphp: Slot [1] registered [ 0.637028] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.637090] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.637095] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.637103] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.637615] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.638234] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.638799] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.639366] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.639931] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.640547] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.641205] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.641771] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.642594] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.642732] ACPI: \_SB_.PCI0: notify handler is installed [ 0.642775] Found 1 acpi root devices [ 0.642808] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.642926] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.643000] vgaarb: loaded [ 0.643054] vgaarb: bridge control possible 0000:00:02.0 [ 0.643140] PCI: Using ACPI for IRQ routing [ 0.649950] PCI: pci_cache_line_size set to 64 bytes [ 0.650098] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff] [ 0.650100] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff] [ 0.650101] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 0.650102] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.650186] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.650593] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.652670] Switched to clocksource hpet [ 0.653918] pnp: PnP ACPI init [ 0.653981] ACPI: bus type PNP registered [ 0.654101] pnp 00:00: [dma 4] [ 0.654116] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.654132] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.654201] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.654224] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.654258] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.654319] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.654379] system 00:04: [io 0xffff] has been reserved [ 0.654439] system 00:04: [io 0xffff] has been reserved [ 0.654499] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.654559] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.654621] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.654681] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.654741] system 00:04: [io 0x2000] has been reserved [ 0.654800] system 00:04: [io 0x2004] has been reserved [ 0.654859] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.654878] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.654908] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.654969] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.654992] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.655016] pnp 00:08: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active) [ 0.655044] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.655144] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.655204] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.655264] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.655325] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.655385] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.655445] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.655510] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.655570] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.655631] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.655693] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.655754] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.656198] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 0.656261] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved [ 0.656323] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.656335] pnp: PnP ACPI: found 12 devices [ 0.656392] ACPI: bus type PNP unregistered [ 0.662646] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.662706] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.662769] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.662831] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.662908] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.662967] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.663029] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.663091] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.663167] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.663227] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.663289] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.663352] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.663428] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.663487] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.663549] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.663612] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.663688] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.663748] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.663812] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.663875] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.664119] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.664121] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.664123] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.664124] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.664126] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.664127] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff] [ 0.664128] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.664130] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.664131] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff] [ 0.664132] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.664134] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 0.664135] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff] [ 0.664137] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.664138] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.664139] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff] [ 0.664141] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.664142] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff] [ 0.664143] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff] [ 0.664145] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.664196] NET: Registered protocol family 2 [ 0.664440] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.664698] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.664876] TCP: Hash tables configured (established 65536 bind 65536) [ 0.664952] TCP: reno registered [ 0.665016] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.665100] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.665240] NET: Registered protocol family 1 [ 0.665305] pci 0000:00:02.0: Boot video device [ 0.708826] PCI: CLS 64 bytes, default 64 [ 0.708859] Unpacking initramfs... [ 1.048858] Freeing initrd memory: 23356K (ffff880035252000 - ffff880036921000) [ 1.048936] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.048997] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff880096e3f000-ffff88009ae3efff] [ 1.049094] Simple Boot Flag at 0x44 set to 0x1 [ 1.049538] audit: initializing netlink socket (disabled) [ 1.049606] type=2000 audit(1386767639.040:1): initialized [ 1.059944] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.060450] VFS: Disk quotas dquot_6.5.2 [ 1.060527] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.060652] msgmni has been set to 15834 [ 1.060895] alg: No test for stdrng (krng) [ 1.060975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.061075] io scheduler noop registered [ 1.061134] io scheduler deadline registered [ 1.061211] io scheduler cfq registered (default) [ 1.061530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.061598] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.061697] intel_idle: MWAIT substates: 0x21120 [ 1.061698] intel_idle: v0.4 model 0x2A [ 1.061699] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.061735] GHES: HEST is not enabled! [ 1.061828] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.062736] Linux agpgart interface v0.103 [ 1.062861] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.065903] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.065962] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.066105] mousedev: PS/2 mouse device common for all mice [ 1.066193] rtc_cmos 00:05: RTC can wake from S4 [ 1.066366] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.066450] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.066527] Intel P-state driver initializing. [ 1.066591] Intel pstate controlling: cpu 0 [ 1.066660] Intel pstate controlling: cpu 1 [ 1.066726] Intel pstate controlling: cpu 2 [ 1.066790] Intel pstate controlling: cpu 3 [ 1.066929] cpuidle: using governor ladder [ 1.067065] cpuidle: using governor menu [ 1.067122] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.067182] AMD IOMMUv2 functionality not available on this system [ 1.067299] TCP: cubic registered [ 1.067409] NET: Registered protocol family 10 [ 1.067608] mip6: Mobile IPv6 [ 1.067664] NET: Registered protocol family 17 [ 1.067722] mpls_gso: MPLS GSO support [ 1.067958] PM: Hibernation image not present or could not be loaded. [ 1.067966] registered taskstats version 1 [ 1.068659] rtc_cmos 00:05: setting system clock to 2013-12-11 13:13:59 UTC (1386767639) [ 1.069245] Freeing unused kernel memory: 968K (ffffffff818a6000 - ffffffff81998000) [ 1.069318] Write protecting the kernel read-only data: 8192k [ 1.072224] Freeing unused kernel memory: 1504K (ffff880001488000 - ffff880001600000) [ 1.073179] Freeing unused kernel memory: 472K (ffff88000178a000 - ffff880001800000) [ 1.083972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.159825] systemd-udevd[70]: starting version 204 [ 1.171725] [drm] Initialized drm 1.1.0 20060810 [ 1.172454] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.172570] ACPI: Lid Switch [LID0] [ 1.174521] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.174607] ACPI: Power Button [PWRB] [ 1.175091] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.175162] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.175489] r8169 0000:05:00.0: irq 40 for MSI/MSI-X [ 1.175676] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c28000, 54:42:49:99:f8:a4, XID 0c900800 IRQ 40 [ 1.175762] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.175853] ACPI: bus type USB registered [ 1.175938] usbcore: registered new interface driver usbfs [ 1.176006] usbcore: registered new interface driver hub [ 1.178738] usbcore: registered new device driver usb [ 1.179288] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.179359] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 [ 1.179630] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X [ 1.179638] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 1.179644] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.179650] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.179657] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.179784] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.179851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.179929] usb usb1: Product: xHCI Host Controller [ 1.179991] usb usb1: Manufacturer: Linux 3.11-2-amd64 xhci_hcd [ 1.180056] usb usb1: SerialNumber: 0000:04:00.0 [ 1.180193] xHCI xhci_add_endpoint called for root hub [ 1.180195] xHCI xhci_check_bandwidth called for root hub [ 1.180226] hub 1-0:1.0: USB hub found [ 1.180291] hub 1-0:1.0: 2 ports detected [ 1.180434] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.180494] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.180619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.180885] ehci-pci: EHCI PCI platform driver [ 1.181022] [drm] Memory usable by graphics device = 2048M [ 1.181144] i915 0000:00:02.0: setting latency timer to 64 [ 1.182949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.183019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.183094] usb usb2: Product: xHCI Host Controller [ 1.183154] usb usb2: Manufacturer: Linux 3.11-2-amd64 xhci_hcd [ 1.183216] usb usb2: SerialNumber: 0000:04:00.0 [ 1.183357] xHCI xhci_add_endpoint called for root hub [ 1.183359] xHCI xhci_check_bandwidth called for root hub [ 1.183387] hub 2-0:1.0: USB hub found [ 1.183452] hub 2-0:1.0: 2 ports detected [ 1.183929] rtsx_pci 0000:03:00.0: irq 46 for MSI/MSI-X [ 1.183945] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 [ 1.186021] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.186085] ACPI: Thermal Zone [TZ01] (62 C) [ 1.197836] SCSI subsystem initialized [ 1.199107] ACPI: bus type ATA registered [ 1.203806] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 1.203818] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.203884] [drm] Driver supports precise vblank timestamp query. [ 1.203962] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 1.204192] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 1.204474] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.205996] libata version 3.00 loaded. [ 1.208700] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 1.241876] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1.241936] [drm] This can cause pipe underruns and display issues. [ 1.241994] [drm] Please upgrade your BIOS to fix this. [ 1.259945] fbcon: inteldrmfb (fb0) is primary device [ 2.050418] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 2.831543] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.017578] Console: switching to colour frame buffer device 240x67 [ 3.023593] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.023629] i915 0000:00:02.0: registered panic notifier [ 3.023830] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.023903] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.023976] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.024050] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.024123] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.024196] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.024270] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.025207] acpi device:3e: registered as cooling_device0 [ 3.025354] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.025426] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input3 [ 3.025468] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.025591] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 3.025601] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.025633] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.025686] ehci-pci 0000:00:1a.0: debug port 2 [ 3.029635] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.029653] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000 [ 3.039745] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.039812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.039842] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.039881] usb usb3: Product: EHCI Host Controller [ 3.039914] usb usb3: Manufacturer: Linux 3.11-2-amd64 ehci_hcd [ 3.039935] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.040163] hub 3-0:1.0: USB hub found [ 3.040191] hub 3-0:1.0: 2 ports detected [ 3.040371] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 3.040377] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.040400] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.040437] ehci-pci 0000:00:1d.0: debug port 2 [ 3.044359] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.044377] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000 [ 3.052015] Switched to clocksource tsc [ 3.055755] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.055831] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.055857] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.055882] usb usb4: Product: EHCI Host Controller [ 3.055900] usb usb4: Manufacturer: Linux 3.11-2-amd64 ehci_hcd [ 3.055920] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.056133] hub 4-0:1.0: USB hub found [ 3.056160] hub 4-0:1.0: 2 ports detected [ 3.056267] ahci 0000:00:1f.2: version 3.0 [ 3.056385] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 3.056437] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 3.057280] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst [ 3.057955] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.058281] scsi0 : ahci [ 3.059320] scsi1 : ahci [ 3.060150] scsi2 : ahci [ 3.061134] scsi3 : ahci [ 3.061973] scsi4 : ahci [ 3.062816] scsi5 : ahci [ 3.063638] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 48 [ 3.064450] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 48 [ 3.065260] ata3: DUMMY [ 3.066076] ata4: DUMMY [ 3.066896] ata5: DUMMY [ 3.067722] ata6: DUMMY [ 3.352159] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.388195] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.390893] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.394994] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM03S1Q, max UDMA/133 [ 3.397485] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.401690] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM03S1Q, max UDMA/133 [ 3.404254] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.407088] ata1.00: configured for UDMA/133 [ 3.409899] ata2.00: configured for UDMA/133 [ 3.410070] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 3.415709] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 3.424553] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.424559] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.424694] sd 1:0:0:0: [sdb] Write Protect is off [ 3.424699] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.424752] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.425693] sdb: unknown partition table [ 3.426079] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.437074] sd 0:0:0:0: [sda] Write Protect is off [ 3.438953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.438976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.441201] sda: sda1 sda2 sda3 sda4 < > [ 3.443155] sda: partition table partially beyond EOD, enabling native capacity [ 3.445479] sda: sda1 sda2 sda3 sda4 < > [ 3.447382] sda: partition table partially beyond EOD, truncated [ 3.449450] sda: p3 size 242958336 extends beyond EOD, truncated [ 3.451249] sda: p4 start 272339454 is beyond EOD, truncated [ 3.453239] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.457093] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.458891] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.484565] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.484567] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.484855] hub 3-1:1.0: USB hub found [ 3.484906] hub 3-1:1.0: 6 ports detected [ 3.504096] md: md127 stopped. [ 3.507032] md: bind<sda> [ 3.508637] md: bind<sdb> [ 3.510070] md: could not open unknown-block(8,3). [ 3.520709] md: md126 stopped. [ 3.522176] md: bind<sdb> [ 3.523570] md: bind<sda> [ 3.525962] md: raid0 personality registered for level 0 [ 3.527585] md/raid0:md126: md_size is 500129792 sectors. [ 3.528903] md: RAID0 configuration for md126 - 1 zone [ 3.530206] md: zone0=[sda/sdb] [ 3.531517] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 3.532841] [ 3.534108] md126: detected capacity change from 0 to 256066453504 [ 3.536741] md126: p1 p2 p3 p4 < p5 p6 > [ 3.559497] device-mapper: uevent: version 1.0.3 [ 3.560778] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 3.596336] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 3.729111] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.729121] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.729729] hub 4-1:1.0: USB hub found [ 3.729868] hub 4-1:1.0: 8 ports detected [ 3.800925] usb 3-1.1: new full-speed USB device number 3 using ehci-pci [ 3.895535] usb 3-1.1: New USB device found, idVendor=08ff, idProduct=168f [ 3.895545] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.895550] usb 3-1.1: Product: Fingerprint Sensor [ 3.965105] usb 3-1.2: new full-speed USB device number 4 using ehci-pci [ 4.062281] usb 3-1.2: New USB device found, idVendor=8086, idProduct=0189 [ 4.062290] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.133295] usb 3-1.3: new high-speed USB device number 5 using ehci-pci [ 4.231562] usb 3-1.3: New USB device found, idVendor=05c8, idProduct=0318 [ 4.231572] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.231577] usb 3-1.3: Product: USB2.0 Camera [ 4.231581] usb 3-1.3: Manufacturer: Ricoh Company Ltd. [ 4.231585] usb 3-1.3: SerialNumber: 145839811AP0B00003KBF65R0 [ 4.301499] usb 3-1.4: new high-speed USB device number 6 using ehci-pci [ 4.399393] usb 3-1.4: New USB device found, idVendor=12d1, idProduct=14f1 [ 4.399403] usb 3-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 4.399407] usb 3-1.4: Product: Huawei EM680 w/Gobi Technology [ 4.399412] usb 3-1.4: Manufacturer: HUAWEI Incorporated [ 39.563416] bio: create slab <bio-1> at 1 [ 40.007217] bio: create slab <bio-1> at 1 [ 40.128284] PM: Starting manual resume from disk [ 40.128291] PM: Hibernation image partition 253:2 present [ 40.128294] PM: Looking for hibernation image. [ 40.128604] PM: Image not found (code -22) [ 40.128609] PM: Hibernation image not present or could not be loaded. [ 40.147046] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem [ 40.149101] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 40.271786] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 40.274953] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 40.306265] systemd[1]: Inserted module 'autofs4' [ 40.306704] systemd[1]: Set hostname to <coal>. [ 40.428898] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. [ 40.429342] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 40.429475] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 40.429505] systemd[1]: Starting Syslog Socket. [ 40.432817] systemd[1]: Listening on Syslog Socket. [ 40.432843] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 40.436004] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 40.436025] systemd[1]: Starting Delayed Shutdown Socket. [ 40.439240] systemd[1]: Listening on Delayed Shutdown Socket. [ 40.439287] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 40.442653] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 40.442778] systemd[1]: Starting udev Kernel Socket. [ 40.445948] systemd[1]: Listening on udev Kernel Socket. [ 40.446072] systemd[1]: Starting udev Control Socket. [ 40.449187] systemd[1]: Listening on udev Control Socket. [ 40.449215] systemd[1]: Starting Journal Socket. [ 40.452336] systemd[1]: Listening on Journal Socket. [ 40.452373] systemd[1]: Starting Syslog. [ 40.455430] systemd[1]: Reached target Syslog. [ 40.455532] systemd[1]: Starting udev Coldplug all Devices... [ 40.459302] systemd[1]: Mounting POSIX Message Queue File System... [ 40.463274] systemd[1]: Starting Journal Service... [ 40.470700] systemd[1]: Started Journal Service. [ 40.471054] systemd[1]: Starting Create static device nodes in /dev... [ 40.476503] systemd[1]: Mounting Debug File System... [ 40.492201] systemd[1]: Starting Load Kernel Modules... [ 40.497461] systemd-journald[402]: Failed to resolve 'systemd-journal' group: No such process [ 40.497637] systemd[1]: Starting Apply Kernel Variables... [ 40.503588] systemd[1]: Expecting device dev-disk-by\x2duuid-e4dd8c41\x2db938\x2d4b43\x2d9f58\x2d37186c17268d.device... [ 40.503671] fuse init (API version 7.22) [ 40.508982] systemd[1]: Expecting device dev-mapper-md126p6_crypt.device... [ 40.510559] loop: module loaded [ 40.516157] systemd[1]: Started Set Up Additional Binary Formats. [ 40.516222] systemd[1]: Mounting Huge Pages File System... [ 40.522266] systemd[1]: Expecting device dev-mapper-coal\x2dswap.device... [ 40.527452] systemd[1]: Starting File System Check on Root Device... [ 40.533531] systemd[1]: Expecting device dev-disk-by\x2duuid-c80f0960\x2de576\x2d4704\x2d86a8\x2dfd5f8a01df21.device... [ 40.538852] systemd[1]: Expecting device dev-mapper-coal\x2dhome.device... [ 40.551405] systemd[1]: Mounted POSIX Message Queue File System. [ 40.557125] systemd[1]: Started Create static device nodes in /dev. [ 40.562365] systemd[1]: Mounted Debug File System. [ 40.567841] systemd[1]: Started Load Kernel Modules. [ 40.573339] systemd[1]: Started Apply Kernel Variables. [ 40.578515] systemd[1]: Mounted Huge Pages File System. [ 40.585174] systemd[1]: Started udev Coldplug all Devices. [ 40.588680] systemd[1]: Started File System Check on Root Device. [ 40.588887] systemd[1]: Started Show Plymouth Boot Screen. [ 40.588939] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. [ 40.588963] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 40.589044] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 40.589065] systemd[1]: Starting Paths. [ 40.592187] systemd[1]: Reached target Paths. [ 40.592226] systemd[1]: Mounted Configuration File System. [ 40.592259] systemd[1]: Mounting FUSE Control File System... [ 40.595893] systemd[1]: Starting udev Kernel Device Manager... [ 40.604694] systemd[1]: Mounted FUSE Control File System. [ 40.606800] systemd-udevd[425]: starting version 204 [ 40.611710] systemd[1]: Started udev Kernel Device Manager. [ 40.611837] systemd[1]: Starting LSB: QEMU KVM module loading script... [ 40.615601] systemd[1]: Starting LSB: Tune IDE hard disks... [ 40.621357] systemd[1]: Starting LSB: MD array assembly... [ 40.625741] systemd[1]: Starting LSB: Set preliminary keymap... [ 40.631114] systemd[1]: Starting LSB: Braille terminal driver... [ 40.801439] mei_me 0000:00:16.0: setting latency timer to 64 [ 40.801523] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X [ 40.821159] ACPI: Requesting acpi_cpufreq [ 40.832183] ACPI: AC Adapter [ADP1] (off-line) [ 40.862270] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 40.875589] ACPI: Battery Slot [BAT1] (battery present) [ 40.884119] sony_laptop: Sony Notebook Control Driver v0.6 [ 40.884388] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4 [ 40.884598] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5 [ 40.896066] ACPI: Battery Slot [BAT2] (battery present) [ 40.908745] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 40.925565] sony_laptop: brightness ignored, must be controlled by ACPI video driver [ 40.958498] cfg80211: Calling CRDA to update world regulatory domain [ 40.968635] usbcore: registered new interface driver usbserial [ 40.968666] usbcore: registered new interface driver usbserial_generic [ 40.970902] Bluetooth: Core ver 2.16 [ 40.970976] usbserial: USB Serial support registered for generic [ 40.971122] NET: Registered protocol family 31 [ 40.971125] Bluetooth: HCI device and connection manager initialized [ 40.971272] Bluetooth: HCI socket layer initialized [ 40.971277] Bluetooth: L2CAP socket layer initialized [ 40.971290] Bluetooth: SCO socket layer initialized [ 40.981483] usbcore: registered new interface driver option [ 40.981518] usbserial: USB Serial support registered for GSM modem (1-port) [ 40.981775] option 3-1.4:1.0: GSM modem (1-port) converter detected [ 40.987005] usbcore: registered new interface driver btusb [ 40.988112] usb 3-1.4: GSM modem (1-port) converter now attached to ttyUSB0 [ 40.988167] option 3-1.4:1.1: GSM modem (1-port) converter detected [ 40.988717] usb 3-1.4: GSM modem (1-port) converter now attached to ttyUSB1 [ 40.988781] option 3-1.4:1.2: GSM modem (1-port) converter detected [ 40.989990] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 40.989997] Copyright(c) 2003-2013 Intel Corporation [ 40.990226] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 40.990508] iwlwifi 0000:02:00.0: irq 50 for MSI/MSI-X [ 40.993792] usb 3-1.4: GSM modem (1-port) converter now attached to ttyUSB2 [ 40.993854] option 3-1.4:1.3: GSM modem (1-port) converter detected [ 40.996230] usb 3-1.4: GSM modem (1-port) converter now attached to ttyUSB3 [ 41.000021] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory [ 41.000309] usbcore: registered new interface driver qcserial [ 41.000344] usbserial: USB Serial support registered for Qualcomm USB modem [ 41.000444] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 41.007320] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 41.007340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 41.007349] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 41.007361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 41.007366] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 41.007381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 41.007386] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251) [ 41.007396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 41.007401] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 41.022554] media: Linux media interface: v0.10 [ 41.023536] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 41.023546] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 41.023552] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 41.023558] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled [ 41.023565] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 41.023705] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 41.030927] usbcore: registered new interface driver cdc_wdm [ 41.034406] Linux video capture interface: v2.00 [ 41.038389] usbcore: registered new interface driver qmi_wwan [ 41.047042] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318) [ 41.051094] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 [ 41.052410] usbcore: registered new interface driver uvcvideo [ 41.052417] USB Video Class driver (1.1.1) [ 41.053063] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 41.053199] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 41.055114] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251) [ 41.055133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 41.075055] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 41.078974] tpm_tis 00:09: TPM is disabled/deactivated (0x7) [ 41.079860] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory [ 41.079900] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 41.081159] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 41.081184] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 41.081225] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory [ 41.081251] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 41.082066] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 41.082087] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 41.082136] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory [ 41.082173] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 41.082995] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 41.083012] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 41.083061] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory [ 41.083093] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 41.083912] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 41.083919] perf_event_intel: PEBS enabled due to microcode update [ 41.084525] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 41.116551] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 41.138890] hda_codec: ALC275: SKU not ready 0x411111f0 [ 41.147927] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 41.160359] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 41.160570] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 41.243841] Adding 15622140k swap on /dev/mapper/coal-swap. Priority:-1 extents:1 across:15622140k [ 41.252352] iTCO_vendor_support: vendor-support=0 [ 41.263857] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 41.263921] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 41.306329] cfg80211: World regulatory domain updated: [ 41.306331] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 41.306336] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.306339] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.306343] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 41.306346] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.306349] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 41.334503] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem [ 41.340995] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 41.380873] EXT4-fs (md126p5): mounting ext3 file system using the ext4 subsystem [ 41.383297] EXT4-fs (md126p5): mounted filesystem with ordered data mode. Opts: (null) [ 41.841403] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x850300/0x120c00, board id: 1690, fw id: 880280 [ 41.876427] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 41.923467] lp: driver loaded but no devices found [ 41.952414] ppdev: user-space parallel port driver [ 42.669685] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 42.676718] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 42.950129] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 42.957154] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 43.030340] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 43.036324] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.058858] r8169 0000:05:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory [ 43.159430] r8169 0000:05:00.0 eth0: link down [ 43.159492] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 49.457529] wlan0: authenticate with 00:23:69:04:19:88 [ 49.463510] wlan0: send auth to 00:23:69:04:19:88 (try 1/3) [ 49.509324] wlan0: authenticated [ 49.509535] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 49.509540] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 49.513190] wlan0: associate with 00:23:69:04:19:88 (try 1/3) [ 49.543028] wlan0: associate with 00:23:69:04:19:88 (try 2/3) [ 49.546591] wlan0: RX AssocResp from 00:23:69:04:19:88 (capab=0x411 status=0 aid=1) [ 49.549899] wlan0: associated [ 49.549947] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/coal-root ro init=/bin/systemd quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Sony Corporation VPCZ22AGX/VAIO, BIOS R1010H5 07/28/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a87000, 0x01a87fff] PGTABLE [ 0.000000] BRK [0x01a88000, 0x01a88fff] PGTABLE [ 0.000000] BRK [0x01a89000, 0x01a89fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M [ 0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ae3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9adfffff] page 2M [ 0.000000] [mem 0x9ae00000-0x9ae3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff] [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35252000-0x36920fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony) [ 0.000000] ACPI: XSDT 000000009affe120 000A4 (v01 Sony VAIO 20110728 01000013) [ 0.000000] ACPI: FACP 000000009affb000 000F4 (v04 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: DSDT 000000009afef000 085DF (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: FACS 000000009af6e000 00040 [ 0.000000] ACPI: TCPA 000000009affd000 00032 (v02 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: HPET 000000009affa000 00038 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: APIC 000000009aff9000 0008C (v02 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SLIC 000000009afee000 00176 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: WDAT 000000009afed000 00224 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afec000 00CA6 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: BOOT 000000009afea000 00028 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe8000 0022B (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: ASPT 000000009afe5000 00034 (v07 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe4000 00846 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe3000 00996 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe2000 00EE8 (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe1000 002DD (v01 Sony VAIO 20110728 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf6000-0x25fdf9fff] [ 0.000000] [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880257400000-ffff88025e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00100000-0x9ae3efff] [ 0.000000] node 0: [mem 0x9afff000-0x9affffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2075598 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 142 pages reserved [ 0.000000] DMA zone: 3982 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8618 pages used for memmap [ 0.000000] DMA32 zone: 630336 pages, LIFO batch:31 [ 0.000000] Normal zone: 19705 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ae3f000-0x9aebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s85952 r8192 d20544 u262144 [ 0.000000] pcpu-alloc: s85952 r8192 d20544 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047077 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/coal-root ro init=/bin/systemd quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8083664K/8302392K available (4629K kernel code, 659K rwdata, 1576K rodata, 968K init, 928K bss, 218728K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2793.695 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.39 BogoMIPS (lpj=11174780) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000027] AppArmor: AppArmor disabled by boot time parameter [ 0.000028] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000389] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001800] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002410] Mount-cache hash table entries: 256 [ 0.002545] Initializing cgroup subsys memory [ 0.002554] Initializing cgroup subsys devices [ 0.002555] Initializing cgroup subsys freezer [ 0.002556] Initializing cgroup subsys net_cls [ 0.002557] Initializing cgroup subsys blkio [ 0.002558] Initializing cgroup subsys perf_event [ 0.002577] CPU: Physical Processor ID: 0 [ 0.002578] CPU: Processor Core ID: 0 [ 0.002582] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002582] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002585] mce: CPU supports 7 MCE banks [ 0.002594] CPU0: Thermal monitoring enabled (TM1) [ 0.002601] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002601] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002601] tlb_flushall_shift: 5 [ 0.002684] Freeing SMP alternatives memory: 20K (ffffffff81998000 - ffffffff8199d000) [ 0.003764] ACPI: Core revision 20130517 [ 0.008677] ACPI: All ACPI Tables successfully acquired [ 0.020875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060609] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.060615] TSC deadline timer enabled [ 0.060622] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.060627] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.060629] ... version: 3 [ 0.060629] ... bit width: 48 [ 0.060630] ... generic registers: 4 [ 0.060631] ... value mask: 0000ffffffffffff [ 0.060632] ... max period: 0000ffffffffffff [ 0.060633] ... fixed-purpose events: 3 [ 0.060633] ... event mask: 000000070000000f [ 0.074066] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.060842] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.100555] Brought up 4 CPUs [ 0.100559] smpboot: Total of 4 processors activated (22349.56 BogoMIPS) [ 0.103811] devtmpfs: initialized [ 0.104806] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.104947] NET: Registered protocol family 16 [ 0.105029] ACPI: bus type PCI registered [ 0.105031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.105080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.105082] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.120495] PCI: Using configuration type 1 for base access [ 0.121020] bio: create slab <bio-0> at 0 [ 0.121111] ACPI: Added _OSI(Module Device) [ 0.121112] ACPI: Added _OSI(Processor Device) [ 0.121113] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.121115] ACPI: Added _OSI(Processor Aggregator Device) [ 0.122155] ACPI: EC: Look up EC in DSDT [ 0.123161] ACPI: Executed 1 blocks of module-level executable AML code [ 0.132692] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.135453] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20110728 INTL 20100121) [ 0.135721] ACPI: Dynamic OEM Table Load: [ 0.135723] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20110728 INTL 20100121) [ 0.147673] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.147971] ACPI: Dynamic OEM Table Load: [ 0.147973] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.156795] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.157055] ACPI: Dynamic OEM Table Load: [ 0.157056] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20110728 INTL 20100121) [ 0.577752] ACPI: Interpreter enabled [ 0.577758] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.577762] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.577774] ACPI: (supports S0 S3 S4 S5) [ 0.577775] ACPI: Using IOAPIC for interrupt routing [ 0.577797] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.578189] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.594868] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.594899] \_SB_.PCI0:_OSC invalid UUID [ 0.594900] _OSC request data:1 8 0 [ 0.594927] \_SB_.PCI0:_OSC invalid UUID [ 0.594928] _OSC request data:1 1f 0 [ 0.594931] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.594932] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.595427] PCI host bridge to bus 0000:00 [ 0.595429] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.595431] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.595433] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.595434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.595436] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.595442] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.595507] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.595516] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.595521] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.595524] pci 0000:00:02.0: reg 0x20: [io 0xa000-0xa03f] [ 0.595606] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.595628] pci 0000:00:16.0: reg 0x10: [mem 0xd9404000-0xd940400f 64bit] [ 0.595701] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.595768] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.596066] pci 0000:00:1a.0: reg 0x10: [mem 0xd9409000-0xd94093ff] [ 0.597807] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.597853] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.597888] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.597902] pci 0000:00:1b.0: reg 0x10: [mem 0xd9400000-0xd9403fff 64bit] [ 0.597966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.598001] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.598029] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.598104] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.598140] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.598169] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.598243] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.598278] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.598307] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.598382] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.598417] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.598445] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.598519] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.598554] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.598589] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.598718] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.598763] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.598797] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.599093] pci 0000:00:1d.0: reg 0x10: [mem 0xd9408000-0xd94083ff] [ 0.600831] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.600876] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.600907] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 0.601060] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.601077] pci 0000:00:1f.2: reg 0x10: [io 0xa088-0xa08f] [ 0.601085] pci 0000:00:1f.2: reg 0x14: [io 0xa094-0xa097] [ 0.601093] pci 0000:00:1f.2: reg 0x18: [io 0xa080-0xa087] [ 0.601100] pci 0000:00:1f.2: reg 0x1c: [io 0xa090-0xa093] [ 0.601108] pci 0000:00:1f.2: reg 0x20: [io 0xa060-0xa07f] [ 0.601116] pci 0000:00:1f.2: reg 0x24: [mem 0xd9407000-0xd94077ff] [ 0.601158] pci 0000:00:1f.2: PME# supported from D3hot [ 0.601211] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.601226] pci 0000:00:1f.3: reg 0x10: [mem 0xd9405000-0xd94050ff 64bit] [ 0.601246] pci 0000:00:1f.3: reg 0x20: [io 0xa040-0xa05f] [ 0.601521] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000 [ 0.601686] pci 0000:02:00.0: reg 0x10: [mem 0xd8400000-0xd8401fff 64bit] [ 0.602345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.602488] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.609802] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.609806] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.609810] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.609816] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.609901] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.609922] pci 0000:03:00.0: reg 0x10: [mem 0xd7400000-0xd7400fff] [ 0.610079] pci 0000:03:00.0: supports D1 D2 [ 0.610080] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.610110] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.617699] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.617709] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.617718] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.617731] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.617895] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.617921] pci 0000:04:00.0: reg 0x10: [mem 0xd6400000-0xd6401fff 64bit] [ 0.618051] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.618084] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.625762] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.625772] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.625781] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.625798] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.625940] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.626007] pci 0000:05:00.0: reg 0x10: [io 0x6000-0x60ff] [ 0.626125] pci 0000:05:00.0: reg 0x18: [mem 0xd3404000-0xd3404fff 64bit pref] [ 0.626199] pci 0000:05:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref] [ 0.626526] pci 0000:05:00.0: supports D1 D2 [ 0.626528] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.626630] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.633767] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.633777] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.633786] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.633800] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.633908] acpiphp: Slot [1] registered [ 0.633916] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.633921] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.633926] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.633934] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.634446] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.634494] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.634539] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.634584] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.634628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.634674] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.634719] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.634763] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.635065] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.635070] ACPI: \_SB_.PCI0: notify handler is installed [ 0.635113] Found 1 acpi root devices [ 0.635145] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.635204] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.635206] vgaarb: loaded [ 0.635207] vgaarb: bridge control possible 0000:00:02.0 [ 0.635236] PCI: Using ACPI for IRQ routing [ 0.642091] PCI: pci_cache_line_size set to 64 bytes [ 0.642236] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff] [ 0.642238] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff] [ 0.642239] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 0.642240] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.642324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.642328] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.644348] Switched to clocksource hpet [ 0.645537] pnp: PnP ACPI init [ 0.645545] ACPI: bus type PNP registered [ 0.645611] pnp 00:00: [dma 4] [ 0.645625] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.645642] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.645711] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.645745] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.645778] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.645780] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.645782] system 00:04: [io 0xffff] has been reserved [ 0.645783] system 00:04: [io 0xffff] has been reserved [ 0.645785] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.645787] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.645788] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.645791] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.645792] system 00:04: [io 0x2000] has been reserved [ 0.645794] system 00:04: [io 0x2004] has been reserved [ 0.645796] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.645815] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.645846] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.645848] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.645871] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.645894] pnp 00:08: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active) [ 0.645922] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.646023] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.646025] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.646027] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.646028] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.646030] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.646032] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.646033] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.646035] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.646037] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.646039] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.646040] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.646481] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 0.646484] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved [ 0.646486] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.646499] pnp: PnP ACPI: found 12 devices [ 0.646500] ACPI: bus type PNP unregistered [ 0.652691] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.652694] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.652700] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.652704] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.652710] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.652713] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.652718] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.652722] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.652728] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.652730] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.652735] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.652739] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.652745] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.652748] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.652753] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.652757] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.652762] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.652765] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.652772] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.652777] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.652950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.652952] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.652953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.652955] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.652956] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.652958] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff] [ 0.652959] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.652960] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.652962] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff] [ 0.652963] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.652964] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 0.652966] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff] [ 0.652967] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.652968] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.652970] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff] [ 0.652971] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.652973] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff] [ 0.652974] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff] [ 0.652975] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.653026] NET: Registered protocol family 2 [ 0.653214] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.653391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.653506] TCP: Hash tables configured (established 65536 bind 65536) [ 0.653523] TCP: reno registered [ 0.653532] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.653558] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.653639] NET: Registered protocol family 1 [ 0.653648] pci 0000:00:02.0: Boot video device [ 0.697050] PCI: CLS 64 bytes, default 64 [ 0.697082] Unpacking initramfs... [ 1.037106] Freeing initrd memory: 23356K (ffff880035252000 - ffff880036921000) [ 1.037111] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.037113] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff880096e3f000-ffff88009ae3efff] [ 1.037132] Simple Boot Flag at 0x44 set to 0x1 [ 1.037490] audit: initializing netlink socket (disabled) [ 1.037500] type=2000 audit(1386767854.024:1): initialized [ 1.047783] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.048225] VFS: Disk quotas dquot_6.5.2 [ 1.048247] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.048314] msgmni has been set to 15834 [ 1.048503] alg: No test for stdrng (krng) [ 1.048527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.048553] io scheduler noop registered [ 1.048555] io scheduler deadline registered [ 1.048570] io scheduler cfq registered (default) [ 1.048835] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.048880] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.048922] intel_idle: MWAIT substates: 0x21120 [ 1.048924] intel_idle: v0.4 model 0x2A [ 1.048924] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.048959] GHES: HEST is not enabled! [ 1.048998] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.049368] Linux agpgart interface v0.103 [ 1.049439] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.052036] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.052040] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.052125] mousedev: PS/2 mouse device common for all mice [ 1.052156] rtc_cmos 00:05: RTC can wake from S4 [ 1.052272] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.052300] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.052305] Intel P-state driver initializing. [ 1.052313] Intel pstate controlling: cpu 0 [ 1.052324] Intel pstate controlling: cpu 1 [ 1.052332] Intel pstate controlling: cpu 2 [ 1.052340] Intel pstate controlling: cpu 3 [ 1.052423] cpuidle: using governor ladder [ 1.052504] cpuidle: using governor menu [ 1.052506] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.052507] AMD IOMMUv2 functionality not available on this system [ 1.052565] TCP: cubic registered [ 1.052620] NET: Registered protocol family 10 [ 1.052762] mip6: Mobile IPv6 [ 1.052763] NET: Registered protocol family 17 [ 1.052765] mpls_gso: MPLS GSO support [ 1.052955] PM: Hibernation image not present or could not be loaded. [ 1.052964] registered taskstats version 1 [ 1.053592] rtc_cmos 00:05: setting system clock to 2013-12-11 13:17:34 UTC (1386767854) [ 1.054093] Freeing unused kernel memory: 968K (ffffffff818a6000 - ffffffff81998000) [ 1.054095] Write protecting the kernel read-only data: 8192k [ 1.056878] Freeing unused kernel memory: 1504K (ffff880001488000 - ffff880001600000) [ 1.057717] Freeing unused kernel memory: 472K (ffff88000178a000 - ffff880001800000) [ 1.070338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.136134] systemd-udevd[70]: starting version 204 [ 1.149069] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.149106] ACPI: Lid Switch [LID0] [ 1.149161] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.149165] ACPI: Power Button [PWRB] [ 1.156445] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.156449] ACPI: Thermal Zone [TZ01] (60 C) [ 1.163937] [drm] Initialized drm 1.1.0 20060810 [ 1.165486] ACPI: bus type USB registered [ 1.165512] usbcore: registered new interface driver usbfs [ 1.165522] usbcore: registered new interface driver hub [ 1.166973] SCSI subsystem initialized [ 1.167054] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.167064] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.167315] r8169 0000:05:00.0: irq 40 for MSI/MSI-X [ 1.167495] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c28000, 54:42:49:99:f8:a4, XID 0c900800 IRQ 40 [ 1.167498] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.170145] ACPI: bus type ATA registered [ 1.170581] [drm] Memory usable by graphics device = 2048M [ 1.170588] i915 0000:00:02.0: setting latency timer to 64 [ 1.171023] rtsx_pci 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.171040] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41 [ 1.171302] usbcore: registered new device driver usb [ 1.171617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.171765] ehci-pci: EHCI PCI platform driver [ 1.172138] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.172145] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 [ 1.172331] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 1.172337] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.172342] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.172348] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.172354] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 1.172469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.172472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.172474] usb usb1: Product: xHCI Host Controller [ 1.172476] usb usb1: Manufacturer: Linux 3.11-2-amd64 xhci_hcd [ 1.172477] usb usb1: SerialNumber: 0000:04:00.0 [ 1.173426] libata version 3.00 loaded. [ 1.180597] xHCI xhci_add_endpoint called for root hub [ 1.180601] xHCI xhci_check_bandwidth called for root hub [ 1.180637] hub 1-0:1.0: USB hub found [ 1.180648] hub 1-0:1.0: 2 ports detected [ 1.180734] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.180739] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.180777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.180779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.180781] usb usb2: Product: xHCI Host Controller [ 1.180783] usb usb2: Manufacturer: Linux 3.11-2-amd64 xhci_hcd [ 1.180785] usb usb2: SerialNumber: 0000:04:00.0 [ 1.180849] xHCI xhci_add_endpoint called for root hub [ 1.180851] xHCI xhci_check_bandwidth called for root hub [ 1.180875] hub 2-0:1.0: USB hub found [ 1.180884] hub 2-0:1.0: 2 ports detected [ 1.181974] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 1.193549] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 1.193556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.193557] [drm] Driver supports precise vblank timestamp query. [ 1.193572] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 1.193616] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 1.193691] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.233399] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 1.233401] [drm] This can cause pipe underruns and display issues. [ 1.233401] [drm] Please upgrade your BIOS to fix this. [ 1.251599] fbcon: inteldrmfb (fb0) is primary device [ 2.038105] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 2.831260] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.039431] Switched to clocksource tsc [ 3.062882] Console: switching to colour frame buffer device 240x67 [ 3.066214] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.066215] i915 0000:00:02.0: registered panic notifier [ 3.066356] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066359] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066361] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066364] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066366] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066369] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.066372] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.067140] acpi device:3e: registered as cooling_device0 [ 3.067264] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.067303] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input3 [ 3.067322] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.067422] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 3.067431] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.067438] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.067452] ehci-pci 0000:00:1a.0: debug port 2 [ 3.071366] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.071382] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000 [ 3.083439] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.083503] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.083504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.083506] usb usb3: Product: EHCI Host Controller [ 3.083507] usb usb3: Manufacturer: Linux 3.11-2-amd64 ehci_hcd [ 3.083508] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.083595] hub 3-0:1.0: USB hub found [ 3.083599] hub 3-0:1.0: 2 ports detected [ 3.083736] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 3.083741] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.083745] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.083756] ehci-pci 0000:00:1d.0: debug port 2 [ 3.087641] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.087654] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000 [ 3.099451] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.099503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.099509] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.099514] usb usb4: Product: EHCI Host Controller [ 3.099519] usb usb4: Manufacturer: Linux 3.11-2-amd64 ehci_hcd [ 3.099523] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.099612] hub 4-0:1.0: USB hub found [ 3.099615] hub 4-0:1.0: 2 ports detected [ 3.099713] ahci 0000:00:1f.2: version 3.0 [ 3.099806] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 3.099865] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 3.099868] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst [ 3.099873] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.100374] scsi0 : ahci [ 3.100509] scsi1 : ahci [ 3.100572] scsi2 : ahci [ 3.100629] scsi3 : ahci [ 3.100693] scsi4 : ahci [ 3.100748] scsi5 : ahci [ 3.100801] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 48 [ 3.100804] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 48 [ 3.100805] ata3: DUMMY [ 3.100805] ata4: DUMMY [ 3.100806] ata5: DUMMY [ 3.100807] ata6: DUMMY [ 3.395902] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.419904] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.419936] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.420545] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM03S1Q, max UDMA/133 [ 3.420552] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.420710] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM03S1Q, max UDMA/133 [ 3.420717] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.420977] ata1.00: configured for UDMA/133 [ 3.421151] ata2.00: configured for UDMA/133 [ 3.421248] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 3.421683] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 3.425090] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.425108] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.425126] sd 0:0:0:0: [sda] Write Protect is off [ 3.425128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.425139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.425188] sd 1:0:0:0: [sdb] Write Protect is off [ 3.425191] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.425214] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.425357] sda: sda1 sda2 sda3 sda4 < > [ 3.425360] sda: partition table partially beyond EOD, enabling native capacity [ 3.425540] sda: sda1 sda2 sda3 sda4 < > [ 3.425542] sda: partition table partially beyond EOD, truncated [ 3.425603] sda: p3 size 242958336 extends beyond EOD, truncated [ 3.425634] sda: p4 start 272339454 is beyond EOD, truncated [ 3.425755] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.425824] sdb: unknown partition table [ 3.425963] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.427328] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.427380] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.452899] md: md127 stopped. [ 3.453703] md: bind<sda3> [ 3.453752] md: could not open unknown-block(8,0). [ 3.453871] md: bind<sdb> [ 3.462045] md: md126 stopped. [ 3.462130] md: bind<sdb> [ 3.462192] md: bind<sda3> [ 3.462976] md: raid0 personality registered for level 0 [ 3.463140] md/raid0:md126: md_size is 500129792 sectors. [ 3.463141] md: RAID0 configuration for md126 - 1 zone [ 3.463142] md: zone0=[sda3/sdb] [ 3.463144] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 3.463145] [ 3.463157] md126: detected capacity change from 0 to 256066453504 [ 3.463897] md126: unknown partition table [ 3.469786] device-mapper: uevent: version 1.0.3 [ 3.469836] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 3.528495] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.528500] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.528841] hub 3-1:1.0: USB hub found [ 3.529015] hub 3-1:1.0: 6 ports detected [ 3.640190] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 3.773008] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.773018] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.773443] hub 4-1:1.0: USB hub found [ 3.773555] hub 4-1:1.0: 8 ports detected [ 3.844592] usb 3-1.1: new full-speed USB device number 3 using ehci-pci [ 3.939300] usb 3-1.1: New USB device found, idVendor=08ff, idProduct=168f [ 3.939311] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.939315] usb 3-1.1: Product: Fingerprint Sensor [ 4.008787] usb 3-1.2: new full-speed USB device number 4 using ehci-pci [ 4.105692] usb 3-1.2: New USB device found, idVendor=8086, idProduct=0189 [ 4.105703] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.176999] usb 3-1.3: new high-speed USB device number 5 using ehci-pci [ 4.275407] usb 3-1.3: New USB device found, idVendor=05c8, idProduct=0318 [ 4.275417] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.275422] usb 3-1.3: Product: USB2.0 Camera [ 4.275426] usb 3-1.3: Manufacturer: Ricoh Company Ltd. [ 4.275430] usb 3-1.3: SerialNumber: 145839811AP0B00003KBF65R0 [ 4.345176] usb 3-1.4: new high-speed USB device number 6 using ehci-pci [ 4.441848] usb 3-1.4: New USB device found, idVendor=12d1, idProduct=14f1 [ 4.441858] usb 3-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 4.441863] usb 3-1.4: Product: Huawei EM680 w/Gobi Technology [ 4.441867] usb 3-1.4: Manufacturer: HUAWEI Incorporated