Bug#731600: linux-image-3.11-2-686-pae: gma500 module error on GMA3600
Package: src:linux
Version: 3.11.8-1
Severity: important
Tags: upstream
Dear Maintainer,
when logging out of an X session, the following appears
Dec 7 13:47:46 localhost kernel: [ 2008.657142] ------------[ cut here
]------------
Dec 7 13:47:46 localhost kernel: [ 2008.657261] kernel BUG at /build/linux-
JjGtit/linux-3.11.8/drivers/gpu/drm/drm_gem.c:573!
Dec 7 13:47:46 localhost kernel: [ 2008.657433] invalid opcode: 0000 [#1] SMP
Dec 7 13:47:46 localhost kernel: [ 2008.657538] Modules linked in: bnep rfcomm
binfmt_misc fuse loop hid_generic usbhid hid uvcvideo videobuf2_vmalloc
videobuf2_memops videobuf2_core videodev media snd_hda_codec_hdmi btusb
snd_hda_codec_realtek arc4 bluetooth snd_hda_intel brcmsmac cordic brcmutil b43
eeepc_wmi mac80211 snd_hda_codec asus_wmi joydev sparse_keymap cfg80211 ssb
mmc_core rng_core coretemp snd_hwdep snd_pcm rfkill microcode snd_page_alloc
snd_timer iTCO_wdt iTCO_vendor_support pcmcia pcmcia_core snd acpi_cpufreq
r8169 gma500_gfx lpc_ich mii drm_kms_helper mfd_core drm pcspkr soundcore mperf
i2c_algo_bit wmi battery ac video processor button psmouse serio_raw evdev
uhci_hcd ehci_pci ehci_hcd usbcore i2c_i801 i2c_core bcma usb_common ext4 crc16
mbcache jbd2 sd_mod crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys
Dec 7 13:47:46 localhost kernel: [ 2008.659703] CPU: 1 PID: 2278 Comm: Xorg
Tainted: G W 3.11-2-686-pae #1 Debian 3.11.8-1
Dec 7 13:47:46 localhost kernel: [ 2008.659884] Hardware name: ASUSTeK
Computer Inc. 1225C/1225C, BIOS 214 07/06/2012
Dec 7 13:47:46 localhost kernel: [ 2008.660042] task: f59051c0 ti: f4162000
task.ti: f4162000
Dec 7 13:47:46 localhost kernel: [ 2008.660159] EIP: 0060:[<f848ae9c>] EFLAGS:
00213246 CPU: 1
Dec 7 13:47:46 localhost kernel: [ 2008.660290] EIP is at
drm_gem_object_free+0x1c/0x20 [drm]
Dec 7 13:47:46 localhost kernel: [ 2008.660407] EAX: f58f2328 EBX: 00000000
ECX: 00000001 EDX: f5b6cc00
Dec 7 13:47:46 localhost kernel: [ 2008.660539] ESI: f8670080 EDI: f5beb000
EBP: f5b6cc00 ESP: f4163e44
Dec 7 13:47:46 localhost kernel: [ 2008.660672] DS: 007b ES: 007b FS: 00d8
GS: 00e0 SS: 0068
Dec 7 13:47:46 localhost kernel: [ 2008.660787] CR0: 80050033 CR2: b2944a0c
CR3: 0160d000 CR4: 000007f0
Dec 7 13:47:46 localhost kernel: [ 2008.660919] Stack:
Dec 7 13:47:46 localhost kernel: [ 2008.660966] f8500cd1 00000000 00000000
c10f0dc0 f5b6cc00 00000000 f6d4b420 f58b3600
Dec 7 13:47:46 localhost kernel: [ 2008.661195] 00000000 00000000 f8500c00
f84263c9 00000000 00000000 f63a6280 f5b6cc00
Dec 7 13:47:46 localhost kernel: [ 2008.661422] f63a6280 f5b6cc00 f5b6ccd8
f84f4af1 00203282 f440e860 f440e840 f440e868
Dec 7 13:47:46 localhost kernel: [ 2008.661650] Call Trace:
Dec 7 13:47:46 localhost kernel: [ 2008.661726] [<f8500cd1>] ?
cdv_intel_crtc_cursor_set+0xd1/0x250 [gma500_gfx]
Dec 7 13:47:46 localhost kernel: [ 2008.661884] [<c10f0dc0>] ?
free_pages_prepare+0xe0/0x150
Dec 7 13:47:46 localhost kernel: [ 2008.662014] [<f8500c00>] ?
cdv_intel_crtc_dpms+0x690/0x690 [gma500_gfx]
Dec 7 13:47:46 localhost kernel: [ 2008.662166] [<f84263c9>] ?
drm_fb_helper_restore_fbdev_mode+0x79/0xb0 [drm_kms_helper]
Dec 7 13:47:46 localhost kernel: [ 2008.662347] [<f84f4af1>] ?
psb_lastclose+0x21/0x60 [gma500_gfx]
Dec 7 13:47:46 localhost kernel: [ 2008.662489] [<f8489c8e>] ?
drm_lastclose+0x3e/0x240 [drm]
Dec 7 13:47:46 localhost kernel: [ 2008.662627] [<f848a2cd>] ?
drm_release+0x37d/0x530 [drm]
Dec 7 13:47:46 localhost kernel: [ 2008.662755] [<c113843a>] ?
__fput+0xba/0x1e0
Dec 7 13:47:46 localhost kernel: [ 2008.662854] [<c1062a99>] ?
task_work_run+0x89/0xa0
Dec 7 13:47:46 localhost kernel: [ 2008.662962] [<c104bd3c>] ?
do_exit+0x26c/0x910
Dec 7 13:47:46 localhost kernel: [ 2008.663063] [<c11384b4>] ?
__fput+0x134/0x1e0
Dec 7 13:47:46 localhost kernel: [ 2008.663164] [<c114f932>] ?
mntput_no_expire+0x12/0x100
Dec 7 13:47:46 localhost kernel: [ 2008.663278] [<c104c43a>] ?
do_group_exit+0x2a/0x80
Dec 7 13:47:46 localhost kernel: [ 2008.663386] [<c104c49f>] ?
SyS_exit_group+0xf/0x10
Dec 7 13:47:46 localhost kernel: [ 2008.663495] [<c13f0c0d>] ?
sysenter_do_call+0x12/0x28
Dec 7 13:47:46 localhost kernel: [ 2008.663604] Code: 89 4a 38 c3 0f 0b 89 f6
8d bc 27 00 00 00 00 8b 50 08 8b 4a 14 83 f9 01 74 11 8b 92 34 02 00 00 8b 52
78 85 d2 74 02 ff d2 f3 c3 <0f> 0b 66 90 56 89 ce 53 83 ec 04 f7 c1 ff 0f 00 00
75 3c 89 42
Dec 7 13:47:46 localhost kernel: [ 2008.664586] EIP: [<f848ae9c>]
drm_gem_object_free+0x1c/0x20 [drm] SS:ESP 0068:f4163e44
Dec 7 13:47:46 localhost kernel: [ 2008.664824] ---[ end trace
ae08513271ea008f ]---
Dec 7 13:47:46 localhost kernel: [ 2008.664968] Fixing recursive fault but
reboot is needed!
-- Package-specific info:
** Version:
Linux version 3.11-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-2-686-pae root=UUID=730214ca-87d6-4d4e-8b83-6f429f84b1e4 ro quiet
** Not tainted
** Kernel log:
[ 8.589718] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 8.590142] b43: probe of bcma0:0 failed with error -524
[ 8.590249] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.597036] usb 2-1: New USB device found, idVendor=0458, idProduct=003a
[ 8.597047] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.597054] usb 2-1: Product: Laser Mouse
[ 8.597060] usb 2-1: Manufacturer: Genius
[ 8.656718] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 8.661987] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[ 8.662080] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[ 8.701687] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.826895] fbcon: psbdrmfb (fb0) is primary device
[ 8.838928] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 8.849767] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.878012] usbcore: registered new interface driver usbhid
[ 8.878014] usbhid: USB HID core driver
[ 9.009036] usb 3-2: New USB device found, idVendor=13d3, idProduct=3315
[ 9.009042] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.009047] usb 3-2: Product: Bluetooth module
[ 9.009052] usb 3-2: Manufacturer: Broadcom Corp
[ 9.009057] usb 3-2: SerialNumber: 0008CAAC7A88
[ 9.062135] Bluetooth: Core ver 2.16
[ 9.062179] NET: Registered protocol family 31
[ 9.062181] Bluetooth: HCI device and connection manager initialized
[ 9.062198] Bluetooth: HCI socket layer initialized
[ 9.062204] Bluetooth: L2CAP socket layer initialized
[ 9.062223] Bluetooth: SCO socket layer initialized
[ 9.066485] input: Genius Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input11
[ 9.067153] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Laser Mouse] on usb-0000:00:1d.0-1/input0
[ 9.079825] usbcore: registered new interface driver btusb
[ 9.184974] media: Linux media interface: v0.10
[ 9.209379] Linux video capture interface: v2.00
[ 9.254536] Console: switching to colour frame buffer device 170x48
[ 9.269599] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 9.269605] gma500 0000:00:02.0: registered panic notifier
[ 9.269750] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 9.411602] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 9.431309] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input12
[ 9.431935] usbcore: registered new interface driver uvcvideo
[ 9.431955] USB Video Class driver (1.1.1)
[ 9.883008] cfg80211: World regulatory domain updated:
[ 9.883031] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.883048] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.883062] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.883075] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.883088] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.883101] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.883165] cfg80211: Calling CRDA for country: US
[ 9.912032] cfg80211: Regulatory domain changed to country: US
[ 9.912040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.912046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9.912051] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9.912056] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.912061] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.912065] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.912070] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9.912075] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 11.089334] Bluetooth: hci0 command 0x1009 tx timeout
[ 12.162109] Adding 11717628k swap on /dev/sda8. Priority:-1 extents:1 across:11717628k
[ 12.284143] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 13.084712] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.358739] loop: module loaded
[ 15.424184] fuse init (API version 7.22)
[ 15.978119] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 16.219438] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 16.341039] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.495373] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 18.389356] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
[ 18.583143] r8169 0000:03:00.0 eth0: link down
[ 18.583620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.487697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.487706] Bluetooth: BNEP filters: protocol multicast
[ 26.487725] Bluetooth: BNEP socket layer initialized
[ 26.494851] Bluetooth: RFCOMM TTY layer initialized
[ 26.494885] Bluetooth: RFCOMM socket layer initialized
[ 26.494891] Bluetooth: RFCOMM ver 1.11
[ 30.315167] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 30.338355] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 30.388176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 30.388195] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 30.388390] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.948387] wlan0: authenticate with 30:46:9a:4a:f5:de
[ 31.950221] wlan0: send auth to 30:46:9a:4a:f5:de (try 1/3)
[ 31.951766] wlan0: authenticated
[ 31.955619] wlan0: associate with 30:46:9a:4a:f5:de (try 1/3)
[ 31.959267] wlan0: RX AssocResp from 30:46:9a:4a:f5:de (capab=0x411 status=0 aid=1)
[ 31.960538] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 31.960557] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 31.960588] wlan0: associated
[ 31.960616] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.111519] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 50.509253] systemd-logind[3054]: New seat seat0.
[ 50.537616] systemd-logind[3054]: Watching system buttons on /dev/input/event3 (Power Button)
[ 50.538283] systemd-logind[3054]: Watching system buttons on /dev/input/event9 (Video Bus)
[ 50.538876] systemd-logind[3054]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 50.539494] systemd-logind[3054]: Watching system buttons on /dev/input/event2 (Sleep Button)
[ 50.544708] systemd-logind[3054]: New session 1 of user artem.
[ 50.545472] systemd-logind[3054]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 358.294910] perf samples too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 894.340376] perf samples too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
** Model information
not available
** Loaded modules:
rfcomm
bnep
binfmt_misc
fuse
loop
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
btusb
hid_generic
bluetooth
usbhid
hid
joydev
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
cfg80211
ssb
snd_hda_codec_hdmi
mmc_core
coretemp
eeepc_wmi
asus_wmi
sparse_keymap
snd_hda_codec_realtek
rfkill
rng_core
pcmcia
pcmcia_core
microcode
iTCO_wdt
iTCO_vendor_support
r8169
gma500_gfx
psmouse
snd_hda_intel
pcspkr
serio_raw
drm_kms_helper
snd_hda_codec
acpi_cpufreq
mperf
mii
battery
video
button
ac
wmi
drm
lpc_ich
evdev
mfd_core
uhci_hcd
ehci_pci
i2c_algo_bit
i2c_i801
i2c_core
processor
snd_hwdep
ehci_hcd
usbcore
snd_pcm
bcma
snd_page_alloc
snd_timer
snd
soundcore
usb_common
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf1] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=1M]
Region 1: I/O ports at f100 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 0000000080600000-00000000807fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 80800000-809fffff
Prefetchable memory behind bridge: 0000000080a00000-0000000080bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f0a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dff05000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0f0 [size=8]
Region 1: I/O ports at f0e0 [size=4]
Region 2: I/O ports at f0d0 [size=8]
Region 3: I/O ports at f0c0 [size=4]
Region 4: I/O ports at f020 [size=16]
Region 5: Memory at dff04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: AzureWave Device [1a3b:2047]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfe00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:100b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at dfd04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at dfd00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 004: ID 13d3:5711 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.11-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-97
Versions of packages linux-image-3.11-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb8u1
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.40
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf-show failed
Reply to: