Bug#717698: Problem sort of went away with 3.11
Hello,
I installed
linux-image-3.11-2-amd64 3.11.7-1
and this kernel seems to boot at the second or third attempt at the
latest, while the 3.10 kernel usually refused to boot even after five or
more attempts.
By attempt, I mean successive attempts directly after power-up, not
across power cycles.
I have attached a dmesg for the 3.11 kernel I am currently running.
Kind regards,
--Toni++
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-9) ) #1 SMP Debian 3.11.7-1 (2013-11-09)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/ev0-root ro root=/dev/mapper/ev0-root ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000094bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000094c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A88T-V EVO, BIOS 0404 11/10/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a87000, 0x01a87fff] PGTABLE
[ 0.000000] BRK [0x01a88000, 0x01a88fff] PGTABLE
[ 0.000000] BRK [0x01a89000, 0x01a89fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
[ 0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfe8ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x36372000-0x371b0fff]
[ 0.000000] ACPI: RSDP 00000000000fbb80 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 111010 XSDT1019 20101110 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 111010 FACP1019 20101110 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000cfe90450 0ECD4 (v01 A1684 A1684001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 111010 APIC1019 20101110 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 111010 OEMMCFG 20101110 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 111010 OEMB1019 20101110 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cfe9f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfe9f990 00038 (v01 111010 OEMHPET 20101110 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe9f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
[ 0.000000] NODE_DATA [mem 0x21fffa000-0x21fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217a00000-ffff88021e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00093fff]
[ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] On node 0 totalpages: 2031139
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3987 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11587 pages used for memmap
[ 0.000000] DMA32 zone: 847504 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe90000-0xcfea7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfea8000-0xcfecffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfed0000-0xcfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xcff00000-0xff9fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85952 r8192 d20544 u262144
[ 0.000000] pcpu-alloc: s85952 r8192 d20544 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2003347
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/ev0-root ro root=/dev/mapper/ev0-root ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 820000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 7853908K/8124556K available (4631K kernel code, 659K rwdata, 1572K rodata, 968K init, 928K bss, 270648K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3013.096 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.19 BogoMIPS (lpj=12052384)
[ 0.000061] pid_max: default: 32768 minimum: 301
[ 0.000115] Security Framework initialized
[ 0.000147] AppArmor: AppArmor disabled by boot time parameter
[ 0.000176] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000543] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002540] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003469] Mount-cache hash table entries: 256
[ 0.003651] Initializing cgroup subsys memory
[ 0.003691] Initializing cgroup subsys devices
[ 0.003721] Initializing cgroup subsys freezer
[ 0.003750] Initializing cgroup subsys net_cls
[ 0.003780] Initializing cgroup subsys blkio
[ 0.003809] Initializing cgroup subsys perf_event
[ 0.003854] tseg: 0000000000
[ 0.003860] CPU: Physical Processor ID: 0
[ 0.003890] CPU: Processor Core ID: 0
[ 0.003919] mce: CPU supports 6 MCE banks
[ 0.003952] LVT offset 0 assigned for vector 0xf9
[ 0.003986] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003986] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.003986] tlb_flushall_shift: 4
[ 0.004082] Freeing SMP alternatives memory: 20K (ffffffff81998000 - ffffffff8199d000)
[ 0.004720] ACPI: Core revision 20130517
[ 0.008200] ACPI: All ACPI Tables successfully acquired
[ 0.118007] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157739] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (fam: 10, model: 04, stepping: 02)
[ 0.263258] Performance Events: AMD PMU driver.
[ 0.263316] ... version: 0
[ 0.263346] ... bit width: 48
[ 0.263375] ... generic registers: 4
[ 0.263404] ... value mask: 0000ffffffffffff
[ 0.263433] ... max period: 00007fffffffffff
[ 0.263462] ... fixed-purpose events: 0
[ 0.263491] ... event mask: 000000000000000f
[ 0.263703] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.263811] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.303187] Brought up 4 CPUs
[ 0.303245] smpboot: Total of 4 processors activated (24104.76 BogoMIPS)
[ 0.307845] devtmpfs: initialized
[ 0.309502] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
[ 0.309689] NET: Registered protocol family 16
[ 0.309803] node 0 link 0: io port [1000, ffffff]
[ 0.309805] TOM: 00000000d0000000 aka 3328M
[ 0.309835] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.309837] node 0 link 0: mmio [a0000, bffff]
[ 0.309839] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.309842] node 0 link 0: mmio [f0000000, fe8fffff]
[ 0.309843] node 0 link 0: mmio [fe900000, feafffff]
[ 0.309844] node 0 link 0: mmio [feb00000, ffdfffff]
[ 0.309846] TOM2: 0000000230000000 aka 8960M
[ 0.309875] bus: [bus 00-07] on node 0 link 0
[ 0.309876] bus: 00 [io 0x0000-0xffff]
[ 0.309878] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.309879] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.309880] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.309881] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.309903] ACPI: bus type PCI registered
[ 0.309932] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.310009] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.310042] PCI: not using MMCONFIG
[ 0.310072] PCI: Using configuration type 1 for base access
[ 0.310101] PCI: Using configuration type 1 for extended access
[ 0.310783] bio: create slab <bio-0> at 0
[ 0.310955] ACPI: Added _OSI(Module Device)
[ 0.310985] ACPI: Added _OSI(Processor Device)
[ 0.311016] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.311045] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.311861] ACPI: EC: Look up EC in DSDT
[ 0.312917] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.563841] ACPI: Interpreter enabled
[ 0.563882] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.563976] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.564006] ACPI: Using IOAPIC for interrupt routing
[ 0.564434] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.565307] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.573197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.573293] ACPI: No dock devices found.
[ 0.577418] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.577453] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.577486] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.577697] PCI host bridge to bus 0000:00
[ 0.577728] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.577760] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.577790] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.577821] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.577853] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.577884] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
[ 0.577916] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.577955] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.578035] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
[ 0.578107] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.578135] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.578165] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.578225] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.578252] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.578281] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.578347] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.578366] pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
[ 0.578375] pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
[ 0.578383] pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
[ 0.578392] pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
[ 0.578401] pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
[ 0.578410] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.578500] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.578512] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
[ 0.578589] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.578645] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.578657] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
[ 0.578734] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.578794] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.578812] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
[ 0.578890] pci 0000:00:12.2: supports D1 D2
[ 0.578891] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.578924] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.578985] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.578998] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
[ 0.579075] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.579130] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.579142] pci 0000:00:13.1: reg 0x10: [mem 0xfe8f7000-0xfe8f7fff]
[ 0.579219] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.579279] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.579297] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
[ 0.579375] pci 0000:00:13.2: supports D1 D2
[ 0.579376] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.579408] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.579476] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.579607] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.579622] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.579631] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.579640] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.579648] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.579657] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.579750] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.579770] pci 0000:00:14.2: reg 0x10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
[ 0.579832] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.579862] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.579918] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.580026] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.580082] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.580137] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.580149] pci 0000:00:14.5: reg 0x10: [mem 0xfe8f6000-0xfe8f6fff]
[ 0.580226] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.580286] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.580334] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.580382] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.580427] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.580474] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.580558] pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
[ 0.580565] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.580569] pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.580573] pci 0000:01:05.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff]
[ 0.580581] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
[ 0.580595] pci 0000:01:05.0: supports D1 D2
[ 0.580623] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.580629] pci 0000:01:05.1: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff]
[ 0.580654] pci 0000:01:05.1: supports D1 D2
[ 0.580706] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.580737] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.580739] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.580742] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.580787] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.580798] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.580817] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.580829] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.580879] pci 0000:02:00.0: supports D1 D2
[ 0.580881] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580903] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.587454] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.587488] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.587492] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.587554] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
[ 0.587574] pci 0000:03:00.0: reg 0x10: [mem 0xfebe0000-0xfebfffff]
[ 0.587587] pci 0000:03:00.0: reg 0x14: [mem 0xfeb00000-0xfeb7ffff]
[ 0.587600] pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec1f]
[ 0.587614] pci 0000:03:00.0: reg 0x1c: [mem 0xfebdc000-0xfebdffff]
[ 0.587651] pci 0000:03:00.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.587723] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.595460] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.595494] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.595496] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.595575] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.595612] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.595614] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.595616] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.595617] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.595619] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.595621] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.596046] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.596342] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.596637] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.596931] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.597225] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.597572] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.597920] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
[ 0.598215] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.598634] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.598721] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.598751] Found 1 acpi root devices
[ 0.598791] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.598930] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.598963] vgaarb: loaded
[ 0.598991] vgaarb: bridge control possible 0000:01:05.0
[ 0.599051] PCI: Using ACPI for IRQ routing
[ 0.607308] PCI: pci_cache_line_size set to 64 bytes
[ 0.607358] e820: reserve RAM buffer [mem 0x00094c00-0x0009ffff]
[ 0.607359] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
[ 0.607448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.607608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.609684] Switched to clocksource hpet
[ 0.611085] pnp: PnP ACPI init
[ 0.611123] ACPI: bus type PNP registered
[ 0.611250] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.611277] pnp 00:01: [dma 4]
[ 0.611293] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.611318] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.611336] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.611356] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.611399] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.611462] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.611788] pnp 00:07: [dma 0 disabled]
[ 0.611847] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.611924] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.611956] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.611987] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.612146] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.612177] system 00:09: [io 0x040b] has been reserved
[ 0.612207] system 00:09: [io 0x04d6] has been reserved
[ 0.612237] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.612267] system 00:09: [io 0x0c14] has been reserved
[ 0.612297] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.612328] system 00:09: [io 0x0c52] has been reserved
[ 0.612358] system 00:09: [io 0x0c6c] has been reserved
[ 0.612388] system 00:09: [io 0x0c6f] has been reserved
[ 0.612418] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.612449] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.612479] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.612509] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.612540] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.612570] system 00:09: [io 0x0b00-0x0b3f] has been reserved
[ 0.612601] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.612631] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.612663] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.612693] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.612723] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.612754] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.612784] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.612815] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.612845] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.612876] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.613010] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.613041] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.613071] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.613103] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.613138] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.613181] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.613212] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.613314] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.613345] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.613376] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.613407] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.613437] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.613468] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.613544] pnp: PnP ACPI: found 13 devices
[ 0.613574] ACPI: bus type PNP unregistered
[ 0.619993] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.620024] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.620056] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.620087] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.620120] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.620150] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.620182] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.620215] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.620245] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.620277] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.620309] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.620463] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.620464] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.620466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.620468] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.620469] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.620471] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.620472] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.620474] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.620475] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.620477] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.620479] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.620480] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.620482] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.620483] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.620485] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.620487] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.620488] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.620490] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.620491] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.620559] NET: Registered protocol family 2
[ 0.620777] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.621056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.621322] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.621384] TCP: reno registered
[ 0.621420] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.621493] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.621638] NET: Registered protocol family 1
[ 0.621675] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.646345] pci 0000:01:05.0: Boot video device
[ 1.646354] PCI: CLS 64 bytes, default 64
[ 1.646387] Unpacking initramfs...
[ 1.875137] Freeing initrd memory: 14588K (ffff880036372000 - ffff8800371b1000)
[ 1.875395] PCI-DMA: Disabling AGP.
[ 1.875505] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.875535] PCI-DMA: using GART IOMMU.
[ 1.875565] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.879275] LVT offset 1 assigned for vector 0x400
[ 1.879314] IBS: LVT offset 1 assigned
[ 1.879364] perf: AMD IBS detected (0x0000001f)
[ 1.879632] audit: initializing netlink socket (disabled)
[ 1.879671] type=2000 audit(1384842186.576:1): initialized
[ 1.889444] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.890035] VFS: Disk quotas dquot_6.5.2
[ 1.890086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.890185] msgmni has been set to 15497
[ 1.890459] alg: No test for stdrng (krng)
[ 1.890514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.890584] io scheduler noop registered
[ 1.890617] io scheduler deadline registered
[ 1.890660] io scheduler cfq registered (default)
[ 1.890764] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.890804] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.890851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.890891] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.890987] GHES: HEST is not enabled!
[ 1.891064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.911559] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.911930] Linux agpgart interface v0.103
[ 1.912024] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.912054] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.912209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.912317] mousedev: PS/2 mouse device common for all mice
[ 1.912378] rtc_cmos 00:02: RTC can wake from S4
[ 1.912514] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.912568] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.912605] cpuidle: using governor ladder
[ 1.912634] cpuidle: using governor menu
[ 1.912664] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.912694] AMD IOMMUv2 functionality not available on this system
[ 1.912798] TCP: cubic registered
[ 1.912871] NET: Registered protocol family 10
[ 1.913045] mip6: Mobile IPv6
[ 1.913075] NET: Registered protocol family 17
[ 1.913106] mpls_gso: MPLS GSO support
[ 1.913348] PM: Hibernation image not present or could not be loaded.
[ 1.913357] registered taskstats version 1
[ 1.914057] rtc_cmos 00:02: setting system clock to 2013-11-19 06:23:06 UTC (1384842186)
[ 1.914813] Freeing unused kernel memory: 968K (ffffffff818a6000 - ffffffff81998000)
[ 1.914847] Write protecting the kernel read-only data: 8192k
[ 1.918095] Freeing unused kernel memory: 1500K (ffff880001489000 - ffff880001600000)
[ 1.919127] Freeing unused kernel memory: 476K (ffff880001789000 - ffff880001800000)
[ 1.940086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.981751] udevd[69]: starting version 175
[ 1.992882] SCSI subsystem initialized
[ 1.993649] ACPI: bus type ATA registered
[ 1.995562] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.995611] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.995847] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.995992] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90000c14000, bc:ae:c5:ae:d2:21, XID 0c200000 IRQ 42
[ 1.996027] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.998794] pps_core: LinuxPPS API ver. 1 registered
[ 1.998830] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.999276] PTP clock support registered
[ 1.999894] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.999929] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.000044] e1000e 0000:03:00.0: Disabling ASPM L0s L1
[ 2.000078] e1000e 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.000254] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.000309] e1000e 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.000313] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.000318] e1000e 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.004482] ACPI: bus type USB registered
[ 2.004539] usbcore: registered new interface driver usbfs
[ 2.004580] usbcore: registered new interface driver hub
[ 2.007209] libata version 3.00 loaded.
[ 2.007782] ahci 0000:00:11.0: version 3.0
[ 2.007978] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.008015] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.009984] microcode: CPU0: patch_level=0x01000086
[ 2.010037] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 2.010084] microcode: CPU0: new patch_level=0x010000db
[ 2.010121] microcode: CPU1: patch_level=0x01000086
[ 2.010158] microcode: CPU1: new patch_level=0x010000db
[ 2.010195] microcode: CPU2: patch_level=0x01000086
[ 2.010232] microcode: CPU2: new patch_level=0x010000db
[ 2.010265] microcode: CPU3: patch_level=0x01000086
[ 2.010300] microcode: CPU3: new patch_level=0x010000db
[ 2.010642] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.010934] scsi0 : ahci
[ 2.011741] usbcore: registered new device driver usb
[ 2.012065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.012265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.012410] ohci-pci: OHCI PCI platform driver
[ 2.012526] ehci-pci: EHCI PCI platform driver
[ 2.018542] scsi1 : ahci
[ 2.019678] scsi2 : ahci
[ 2.019779] scsi3 : ahci
[ 2.019871] scsi4 : ahci
[ 2.019951] scsi5 : ahci
[ 2.020013] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[ 2.020047] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[ 2.020080] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[ 2.020112] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[ 2.020145] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22
[ 2.020178] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22
[ 2.020343] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.020563] scsi6 : pata_atiixp
[ 2.021110] scsi7 : pata_atiixp
[ 2.021404] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.021438] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.021919] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.021957] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.022016] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 2.078515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.078548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.078580] usb usb1: Product: OHCI PCI host controller
[ 2.078609] usb usb1: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.078639] usb usb1: SerialNumber: 0000:00:12.0
[ 2.078769] hub 1-0:1.0: USB hub found
[ 2.078807] hub 1-0:1.0: 3 ports detected
[ 2.078985] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 2.079018] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 2
[ 2.079062] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 2.105824] e1000e 0000:03:00.0 eth1: registered PHC clock
[ 2.105857] e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1b:21:50:03:4d
[ 2.105890] e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection
[ 2.105930] e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-003
[ 2.138552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.138587] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.138619] usb usb2: Product: OHCI PCI host controller
[ 2.138648] usb usb2: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.138678] usb usb2: SerialNumber: 0000:00:12.1
[ 2.138796] hub 2-0:1.0: USB hub found
[ 2.138831] hub 2-0:1.0: 3 ports detected
[ 2.139002] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.139035] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
[ 2.139087] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 2.198574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.198606] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.198638] usb usb3: Product: OHCI PCI host controller
[ 2.198668] usb usb3: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.198698] usb usb3: SerialNumber: 0000:00:13.0
[ 2.198819] hub 3-0:1.0: USB hub found
[ 2.198856] hub 3-0:1.0: 3 ports detected
[ 2.199024] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.199057] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 4
[ 2.199101] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8f7000
[ 2.258642] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.258674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.258706] usb usb4: Product: OHCI PCI host controller
[ 2.258735] usb usb4: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.258765] usb usb4: SerialNumber: 0000:00:13.1
[ 2.258889] hub 4-0:1.0: USB hub found
[ 2.258926] hub 4-0:1.0: 3 ports detected
[ 2.259099] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.259132] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 2.259175] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8f6000
[ 2.318669] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.318702] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.318734] usb usb5: Product: OHCI PCI host controller
[ 2.318763] usb usb5: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.318793] usb usb5: SerialNumber: 0000:00:14.5
[ 2.318909] hub 5-0:1.0: USB hub found
[ 2.318947] hub 5-0:1.0: 2 ports detected
[ 2.338704] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.474740] usb 2-3: new low-speed USB device number 2 using ohci-pci
[ 2.506766] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.509803] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[ 2.510772] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.510829] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.510885] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.511505] ata3.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
[ 2.511536] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.511591] ata6.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
[ 2.511625] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.511667] ata1.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
[ 2.511701] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.512296] ata3.00: configured for UDMA/133
[ 2.512386] ata6.00: configured for UDMA/133
[ 2.512437] ata1.00: configured for UDMA/133
[ 2.512607] scsi 0:0:0:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
[ 2.513627] ata5.00: configured for UDMA/100
[ 2.514230] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.514379] sd 0:0:0:0: [sda] Write Protect is off
[ 2.514412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.514451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.518780] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.519549] ata2.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
[ 2.519581] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.520331] ata2.00: configured for UDMA/133
[ 2.520475] scsi 1:0:0:0: Direct-Access ATA ST2000NM0011 SN02 PQ: 0 ANSI: 5
[ 2.520600] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.520724] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.520752] scsi 2:0:0:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
[ 2.520795] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.520821] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.520859] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.520898] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.520899] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.520916] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.522964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.523050] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.523124] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.524501] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5
[ 2.524644] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 2.524820] scsi 5:0:0:0: Direct-Access ATA ST2000NM0011 SN02 PQ: 0 ANSI: 5
[ 2.525251] sdc: sdc1 sdc2
[ 2.525497] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.525529] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.525553] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.525590] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.525591] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.525609] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.534062] sda: sda1 sda2
[ 2.534454] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.534770] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.534805] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.534934] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.535607] sdd: sdd1 sdd2
[ 2.535953] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.538177] sdb: sdb1 sdb2
[ 2.538546] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.643873] usb 2-3: New USB device found, idVendor=046d, idProduct=c03f
[ 2.643907] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.643938] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 2.643967] usb 2-3: Manufacturer: Logitech
[ 2.646000] usb 2-3: USB disconnect, device number 2
[ 2.647483] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.647858] usbcore: registered new interface driver usbhid
[ 2.647892] usbhid: USB HID core driver
[ 2.650957] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.651000] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 6
[ 2.651036] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.651088] ehci-pci 0000:00:12.2: debug port 1
[ 2.651151] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[ 2.662851] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.662899] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.662945] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.662977] usb usb6: Product: EHCI Host Controller
[ 2.663007] usb usb6: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 2.663036] usb usb6: SerialNumber: 0000:00:12.2
[ 2.663141] hub 6-0:1.0: USB hub found
[ 2.663173] hub 6-0:1.0: 6 ports detected
[ 2.726913] hub 1-0:1.0: USB hub found
[ 2.726951] hub 1-0:1.0: 3 ports detected
[ 2.790947] hub 2-0:1.0: USB hub found
[ 2.790988] hub 2-0:1.0: 3 ports detected
[ 2.878963] tsc: Refined TSC clocksource calibration: 3013.426 MHz
[ 2.919065] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.919102] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
[ 2.919139] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.919187] ehci-pci 0000:00:13.2: debug port 1
[ 2.919248] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[ 2.930998] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.931041] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.931072] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.931104] usb usb7: Product: EHCI Host Controller
[ 2.931133] usb usb7: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 2.931163] usb usb7: SerialNumber: 0000:00:13.2
[ 2.931280] hub 7-0:1.0: USB hub found
[ 2.931313] hub 7-0:1.0: 6 ports detected
[ 2.995071] hub 3-0:1.0: USB hub found
[ 2.995109] hub 3-0:1.0: 3 ports detected
[ 3.059098] hub 4-0:1.0: USB hub found
[ 3.059135] hub 4-0:1.0: 3 ports detected
[ 3.073070] md: linear personality registered for level -1
[ 3.074213] md: multipath personality registered for level -4
[ 3.075362] md: raid0 personality registered for level 0
[ 3.076577] md: raid1 personality registered for level 1
[ 3.143098] raid6: sse2x1 4208 MB/s
[ 3.211131] raid6: sse2x2 6696 MB/s
[ 3.279172] raid6: sse2x4 7550 MB/s
[ 3.279205] raid6: using algorithm sse2x4 (7550 MB/s)
[ 3.279235] raid6: using intx1 recovery algorithm
[ 3.279463] xor: measuring software checksum speed
[ 3.315209] usb 2-3: new low-speed USB device number 3 using ohci-pci
[ 3.319187] prefetch64-sse: 12331.000 MB/sec
[ 3.359209] generic_sse: 11671.000 MB/sec
[ 3.359241] xor: using function: prefetch64-sse (12331.000 MB/sec)
[ 3.359409] async_tx: api initialized (async)
[ 3.360202] md: raid6 personality registered for level 6
[ 3.360239] md: raid5 personality registered for level 5
[ 3.360280] md: raid4 personality registered for level 4
[ 3.367242] md: raid10 personality registered for level 10
[ 3.406529] md: md0 stopped.
[ 3.407346] md: bind<sdc1>
[ 3.407548] md: bind<sda1>
[ 3.408988] md/raid1:md0: active with 2 out of 2 mirrors
[ 3.409035] md0: detected capacity change from 0 to 197263360
[ 3.409079] RAID1 conf printout:
[ 3.409082] --- wd:2 rd:2
[ 3.409083] disk 0, wo:0, o:1, dev:sda1
[ 3.409087] disk 1, wo:0, o:1, dev:sdc1
[ 3.410150] md0: unknown partition table
[ 3.473656] md: md1 stopped.
[ 3.474405] md: bind<sdc2>
[ 3.474600] md: bind<sda2>
[ 3.476433] md/raid1:md1: active with 2 out of 2 mirrors
[ 3.476477] md1: detected capacity change from 0 to 1000004780032
[ 3.476520] RAID1 conf printout:
[ 3.476523] --- wd:2 rd:2
[ 3.476526] disk 0, wo:0, o:1, dev:sda2
[ 3.476526] disk 1, wo:0, o:1, dev:sdc2
[ 3.477537] md1: unknown partition table
[ 3.484333] usb 2-3: New USB device found, idVendor=046d, idProduct=c03f
[ 3.484371] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.484412] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 3.484442] usb 2-3: Manufacturer: Logitech
[ 3.493669] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.0/input/input1
[ 3.493785] hid-generic 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0
[ 3.504858] md: md2 stopped.
[ 3.505619] md: bind<sdd1>
[ 3.505831] md: bind<sdb1>
[ 3.506769] md/raid1:md2: active with 2 out of 2 mirrors
[ 3.506817] md2: detected capacity change from 0 to 197361664
[ 3.506866] RAID1 conf printout:
[ 3.506867] --- wd:2 rd:2
[ 3.506868] disk 0, wo:0, o:1, dev:sdb1
[ 3.506869] disk 1, wo:0, o:1, dev:sdd1
[ 3.507977] md2: unknown partition table
[ 3.735179] md: md3 stopped.
[ 3.735929] md: bind<sdd2>
[ 3.736110] md: bind<sdb2>
[ 3.737022] md/raid1:md3: active with 2 out of 2 mirrors
[ 3.737066] md3: detected capacity change from 0 to 2000197726208
[ 3.737110] RAID1 conf printout:
[ 3.737115] --- wd:2 rd:2
[ 3.737116] disk 0, wo:0, o:1, dev:sdb2
[ 3.737117] disk 1, wo:0, o:1, dev:sdd2
[ 3.745965] md3: unknown partition table
[ 3.879579] Switched to clocksource tsc
[ 3.940109] device-mapper: uevent: version 1.0.3
[ 3.940185] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 30.719009] bio: create slab <bio-1> at 1
[ 30.749250] bio: create slab <bio-1> at 1
[ 31.078004] bio: create slab <bio-2> at 2
[ 31.078157] Btrfs loaded
[ 31.430918] PM: Starting manual resume from disk
[ 31.430951] PM: Hibernation image partition 253:2 present
[ 31.430952] PM: Looking for hibernation image.
[ 31.431197] PM: Image not found (code -22)
[ 31.431198] PM: Hibernation image not present or could not be loaded.
[ 31.438018] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem
[ 31.438463] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 31.438493] EXT4-fs (dm-1): write access will be enabled during recovery
[ 31.796119] EXT4-fs (dm-1): recovery complete
[ 31.829033] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 32.814635] udevd[605]: starting version 175
[ 33.178921] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 33.178962] ACPI: Power Button [PWRB]
[ 33.179047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 33.179080] ACPI: Power Button [PWRF]
[ 33.196482] wmi: Mapper loaded
[ 33.297882] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20130517/utaddress-251)
[ 33.297975] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20130517/utaddress-251)
[ 33.298061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.301534] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 33.317465] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 33.317535] sp5100_tco: PCI Revision ID: 0x3c
[ 33.317582] sp5100_tco: failed to find MMIO address, giving up.
[ 33.318906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.345600] EDAC MC: Ver: 3.0.0
[ 33.346482] MCE: In-kernel MCE decoding enabled.
[ 33.350912] AMD64 EDAC driver v3.4.0
[ 33.350965] EDAC amd64: DRAM ECC enabled.
[ 33.351002] EDAC amd64: F10h detected (node 0).
[ 33.351043] EDAC MC: DCT0 chip selects:
[ 33.351045] EDAC amd64: MC: 0: 1024MB 1: 1024MB
[ 33.351074] EDAC amd64: MC: 2: 1024MB 3: 1024MB
[ 33.351103] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 33.351132] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 33.351161] EDAC MC: DCT1 chip selects:
[ 33.351162] EDAC amd64: MC: 0: 1024MB 1: 1024MB
[ 33.351191] EDAC amd64: MC: 2: 1024MB 3: 1024MB
[ 33.351220] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 33.351249] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 33.351278] EDAC amd64: using x4 syndromes.
[ 33.351308] EDAC amd64: MCT channel count: 2
[ 33.351353] EDAC amd64: CS0: Unbuffered DDR3 RAM
[ 33.351382] EDAC amd64: CS1: Unbuffered DDR3 RAM
[ 33.351411] EDAC amd64: CS2: Unbuffered DDR3 RAM
[ 33.351440] EDAC amd64: CS3: Unbuffered DDR3 RAM
[ 33.351672] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 33.351744] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 33.383734] [drm] Initialized drm 1.1.0 20060810
[ 33.408450] acpi-cpufreq: overriding BIOS provided _PSD data
[ 33.588943] kvm: Nested Virtualization enabled
[ 33.588993] kvm: Nested Paging enabled
[ 33.641905] [drm] radeon kernel modesetting enabled.
[ 33.648981] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
[ 33.649058] [drm] register mmio base: 0xFEAE0000
[ 33.649096] [drm] register mmio size: 65536
[ 33.649937] ATOM BIOS: 113
[ 33.650007] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
[ 33.650053] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 33.650098] [drm] Detected VRAM RAM=368M, BAR=256M
[ 33.650136] [drm] RAM width 32bits DDR
[ 33.650305] [TTM] Zone kernel: Available graphics memory: 3968706 kiB
[ 33.650345] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 33.650383] [TTM] Initializing pool allocator
[ 33.650426] [TTM] Initializing DMA pool allocator
[ 33.650499] [drm] radeon: 368M of VRAM memory ready
[ 33.650538] [drm] radeon: 512M of GTT memory ready.
[ 33.650598] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 33.661086] [drm] Loading RS780 Microcode
[ 33.753435] radeon 0000:01:05.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[ 33.754919] radeon 0000:01:05.0: firmware: agent loaded radeon/RS780_me.bin into memory
[ 33.763171] radeon 0000:01:05.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[ 33.765678] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 33.765838] radeon 0000:01:05.0: WB enabled
[ 33.765882] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215840c00
[ 33.765929] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880215840c0c
[ 33.765975] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 33.766013] [drm] Driver supports precise vblank timestamp query.
[ 33.766072] [drm] radeon: irq initialized.
[ 33.766406] radeon 0000:01:05.0: setting latency timer to 64
[ 33.798443] [drm] ring test on 0 succeeded in 0 usecs
[ 33.798541] [drm] ring test on 3 succeeded in 1 usecs
[ 33.798810] [drm] ib test on ring 0 succeeded in 0 usecs
[ 33.798866] [drm] ib test on ring 3 succeeded in 0 usecs
[ 33.799324] [drm] Radeon Display Connectors
[ 33.799363] [drm] Connector 0:
[ 33.799399] [drm] VGA-1
[ 33.799437] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 33.799478] [drm] Encoders:
[ 33.799514] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 33.799551] [drm] Connector 1:
[ 33.799587] [drm] DVI-D-1
[ 33.799622] [drm] HPD1
[ 33.799660] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 33.799701] [drm] Encoders:
[ 33.799736] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 33.799809] [drm] radeon: power management initialized
[ 33.865210] [drm] fb mappable at 0xD0142000
[ 33.865258] [drm] vram apper at 0xD0000000
[ 33.865301] [drm] size 9216000
[ 33.865338] [drm] fb depth is 24
[ 33.865374] [drm] pitch is 7680
[ 33.865551] fbcon: radeondrmfb (fb0) is primary device
[ 33.911882] Console: switching to colour frame buffer device 240x75
[ 33.935707] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 33.935814] radeon 0000:01:05.0: registered panic notifier
[ 33.936128] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
[ 33.970803] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 33.971140] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 33.971429] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 33.971644] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 33.971809] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 33.971971] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 33.972129] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 33.972289] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 33.972912] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 33.983665] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input13
[ 34.477732] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 34.668693] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 34.769592] tun: Universal TUN/TAP device driver, 1.6
[ 34.769693] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 34.820664] loop: module loaded
[ 58.489044] Adding 15622140k swap on /dev/mapper/ev0-swap. Priority:-1 extents:1 across:15622140k
[ 58.496922] Adding 16777212k swap on /dev/mapper/spruce--ev1-swap. Priority:-2 extents:1 across:16777212k
[ 104.867748] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
[ 104.887751] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 104.978644] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 105.060342] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 105.142047] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 105.220559] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 105.255783] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 105.285036] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 105.345285] EXT4-fs (dm-10): mounting ext3 file system using the ext4 subsystem
[ 105.380588] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
[ 105.456022] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
[ 105.560372] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
[ 105.633126] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null)
[ 105.721732] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null)
[ 105.792951] EXT4-fs (dm-18): mounted filesystem with ordered data mode. Opts: (null)
[ 105.836002] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
[ 121.352946] Bridge firewalling registered
[ 121.391781] device eth3 entered promiscuous mode
[ 121.466843] r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[ 121.608244] r8169 0000:02:00.0 eth3: link down
[ 121.608285] r8169 0000:02:00.0 eth3: link down
[ 121.613317] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 121.623911] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 123.954576] r8169 0000:02:00.0 eth3: link up
[ 123.957981] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 123.962112] br0: port 1(eth3) entered forwarding state
[ 123.965567] br0: port 1(eth3) entered forwarding state
[ 123.969071] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 132.978689] br0: port 1(eth3) entered forwarding state
[ 191.542704] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 191.830877] RPC: Registered named UNIX socket transport module.
[ 191.833959] RPC: Registered udp transport module.
[ 191.837532] RPC: Registered tcp transport module.
[ 191.841093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 191.868966] FS-Cache: Loaded
[ 191.921654] FS-Cache: Netfs 'nfs' registered for caching
[ 192.015576] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 193.266629] fuse init (API version 7.22)
[ 193.408294] NET: Registered protocol family 15
[ 193.450211] Initializing XFRM netlink socket
[ 194.053422] Loading iSCSI transport class v2.0-870.
[ 194.099381] iscsi: registered transport (tcp)
[ 194.200460] iscsi: registered transport (iser)
[ 194.340505] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 194.547235] AVX instructions are not detected.
[ 194.605098] AVX instructions are not detected.
[ 194.992398] auditd (4517): /proc/4517/oom_adj is deprecated, please use /proc/4517/oom_score_adj instead.
Reply to: