Bug#728806: linux-image-3.2.0-4-amd64: btrfs reports checksum error, while md5sum shows same checksum on original and backup
Package: src:linux
Version: 3.2.51-1
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
I have a dedicated backup internal SATA HDD; (4TB, GPT), filled 70%. Btrfs on DM-Crypt; Backups are created with Dirvish, e.g., many hardlinked files.
HDD Converted (yesterday) from ext4 to btrfs. Subsequently run scrub. Scrub reports checksum errors: (multiple, as it is a Dirvish backup)
Nov 4 20:40:50 ijntema-svr kernel: [254525.824034] btrfs: checksum error at logical 522774728704 on dev /dev/dm-2, sector 1021044392, root 5, inode 199230932,
offset 2135773184, length 4096, links 87 (path: dvd/20131008-0114/tree/dvd-18+/Contact/VTS_01_1.VOB)
However, when I run md5sum on the backup HDD VTS_01_1.VOB and on the original HDD VTS_01_1.VOB, the checksum is the same. In other words,
backup equals original; hence how can btrfs report a checksum error?
Above checksum error appears as many times as Dirvish snapshots exists. However, a few syslog entries are "corrupt":
Nov 4 20:40:50 ijntema-svr kernel: [254525.824034] btrfs: checksum error at logical 522774728704 on dev /dev/dm-2, sector 1021044392, root 5, in
offset 2135773184, length 4096, links 87 (path: ^B���\��^E^B���(��^E^B����ߙ^E^B����ߙ^E^B����ߙ^E^B���Xߙ^E^B���$ߙ^E^B����ޙ^E^B����ޙ^E^B����ޙ^E^B���Tޙ^E^B���TS_01_1.VOB)
Checksum errors are reported on multiple files. It seems (samples a few) that these have in common that some of the log entries are corrupt.
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a1fd5329-a2e2-4913-a409-1fe39bde8576 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 46.973408] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 46.973409] [drm] Driver supports precise vblank timestamp query.
[ 46.973453] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 47.052019] No connectors reported connected with modes
[ 47.052029] [drm] Cannot find any crtc or sizes - going 1024x768
[ 47.055623] fbcon: inteldrmfb (fb0) is primary device
[ 47.059717] Console: switching to colour frame buffer device 128x48
[ 47.062336] fb0: inteldrmfb frame buffer device
[ 47.062337] drm: registered panic notifier
[ 47.062356] No ACPI video bus found
[ 47.062398] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 50.913889] ivtv 0000:04:00.0: firmware: agent loaded v4l-cx2341x-enc.fw into memory
[ 50.927813] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 51.124161] ivtv0: Encoder revision: 0x02060039
[ 51.969453] cx25840 0-0044: firmware: agent loaded v4l-cx25840.fw into memory
[ 55.756463] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 58.659414] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 60.120401] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 60.311121] loop: module loaded
[ 83.998708] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 85.718049] r8169 0000:01:00.0: eth0: link down
[ 85.718057] r8169 0000:01:00.0: eth0: link down
[ 85.719048] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.773847] RPC: Registered named UNIX socket transport module.
[ 86.773852] RPC: Registered udp transport module.
[ 86.773855] RPC: Registered tcp transport module.
[ 86.773859] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 86.893156] FS-Cache: Loaded
[ 86.973669] FS-Cache: Netfs 'nfs' registered for caching
[ 87.015189] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 88.797250] r8169 0000:01:00.0: eth0: link up
[ 88.798660] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 104.043486] tun: Universal TUN/TAP device driver, 1.6
[ 104.043488] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 106.330800] lp: driver loaded but no devices found
[ 106.355669] ppdev: user-space parallel port driver
[ 109.474905] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 109.527350] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 109.758316] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 115.172189] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 115.183501] NFSD: starting 90-second grace period
[ 185.061947] /dev/vmmon[5572]: Module vmmon: registered with major=10 minor=165
[ 185.061952] /dev/vmmon[5572]: Module vmmon: initialized
[ 185.956391] [5579]: VMCI: shared components initialized.
[ 185.956432] [5579]: VMCI: host components initialized.
[ 185.956597] [5579]: VMCI: Module registered (name=vmci,major=10,minor=59).
[ 185.956600] [5579]: VMCI: Using host personality
[ 185.956602] [5579]: VMCI: Module (name=vmci) is initialized
[ 186.332610] fuse init (API version 7.17)
[ 188.030845] /dev/vmnet: open called by PID 5661 (vmnet-bridge)
[ 188.030854] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 188.030873] /dev/vmnet: port on hub 0 successfully opened
[ 188.030886] bridge-eth0: up
[ 188.030891] bridge-eth0: attached
[ 190.092658] /dev/vmnet: open called by PID 5698 (vmnet-netifup)
[ 190.092672] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 190.092695] /dev/vmnet: port on hub 1 successfully opened
[ 192.883080] /dev/vmnet: open called by PID 5716 (vmnet-dhcpd)
[ 192.883095] /dev/vmnet: port on hub 1 successfully opened
[ 193.213599] /dev/vmnet: open called by PID 5786 (vmnet-natd)
[ 193.213612] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 193.213631] /dev/vmnet: port on hub 8 successfully opened
[ 193.436177] userif-3: sent link down event.
[ 193.436181] userif-3: sent link up event.
[ 193.437633] /dev/vmnet: open called by PID 5792 (vmnet-netifup)
[ 193.437649] /dev/vmnet: port on hub 8 successfully opened
[ 195.378323] /dev/vmnet: open called by PID 5801 (vmnet-dhcpd)
[ 195.378341] /dev/vmnet: port on hub 8 successfully opened
[ 200.776024] vmnet1: no IPv6 routers present
[ 204.128018] vmnet8: no IPv6 routers present
[ 4191.573873] device-mapper: uevent: version 1.0.3
[ 4191.574031] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4199.052389] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6194.320849] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 6203.930014] device label backup devid 1 transid 245 /dev/mapper/crypto-backup-dvd
[ 6203.935619] btrfs: disk space caching is enabled
[ 6204.312718] device label backup devid 1 transid 245 /dev/dm-2
[ 6295.375709] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 6305.528640] SPL: Loaded module v0.6.2-255_g43f7fc0
[ 6305.560381] znvpair: module license 'CDDL' taints kernel.
[ 6305.560387] Disabling lock debugging due to kernel taint
[ 6306.167950] ZFS: Loaded module v0.6.2-520_gd8bff01, ZFS pool version 5000, ZFS filesystem version 5
[ 6306.477645] SPL: using hostid 0x007f0101
[ 6318.380740] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[32484.782025] nfsd: last server has exited, flushing export cache
[32486.520733] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[32486.520756] NFSD: starting 90-second grace period
[32554.742316] /dev/vmmon[10420]: PTSC: initialized at 2500052000 Hz using TSC, TSCs are synchronized.
[32555.588232] /dev/vmmon[10420]: Monitor IPI vector: 0
[32561.312122] /dev/vmnet: open called by PID 10977 (vmx-vcpu-0)
[32561.312147] device eth0 entered promiscuous mode
[32561.312152] bridge-eth0: enabled promiscuous mode
[32561.312155] /dev/vmnet: port on hub 0 successfully opened
[32637.162368] device eth0 left promiscuous mode
[32637.162379] bridge-eth0: disabled promiscuous mode
[32637.162452] /dev/vmnet: open called by PID 10977 (vmx-vcpu-0)
[32637.162468] device eth0 entered promiscuous mode
[32637.162471] bridge-eth0: enabled promiscuous mode
[32637.162473] /dev/vmnet: port on hub 0 successfully opened
[32702.412423] NET: Registered protocol family 39
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 2001
board_vendor: ASUSTeK Computer INC.
board_name: P5Q-VM
board_version: Rev 1.xx
** Loaded modules:
zfs(P)
zunicode(P)
zavl(P)
zcommon(P)
znvpair(P)
spl(O)
sha256_generic
cryptd
aes_x86_64
aes_generic
cbc
dm_crypt
dm_mod
vmnet(O)
fuse
vsock(O)
vmci(O)
vmmon(O)
xt_limit
nf_conntrack_ftp
ipt_MASQUERADE
iptable_nat
nf_nat
xt_multiport
ipt_REJECT
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
parport_pc
ppdev
lp
parport
tun
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
i915
tuner_simple
tuner_types
video
drm_kms_helper
wm8775
drm
tuner
cx25840
ivtv
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
cx2341x
tveeprom
snd_hwdep
v4l2_common
i2c_i801
videodev
v4l2_compat_ioctl32
media
i2c_algo_bit
acpi_cpufreq
mperf
snd_pcm
snd_page_alloc
processor
snd_seq
i2c_core
psmouse
button
serio_raw
coretemp
snd_seq_device
snd_timer
asus_atk0110
snd
thermal_sys
evdev
pcspkr
iTCO_wdt
iTCO_vendor_support
soundcore
ext4
crc16
jbd2
mbcache
btrfs
crc32c
libcrc32c
zlib_deflate
sg
sd_mod
crc_t10dif
usb_storage
ata_generic
floppy
uhci_hcd
pata_marvell
ata_piix
ehci_hcd
r8169
mii
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: ce000000-ce3fffff
Prefetchable memory behind bridge: 00000000f7f00000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000cde00000-00000000cdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f7e00000-00000000f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8f9000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f7ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
04:00.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) Video Decoder [4444:0016] (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150 [0070:8003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: ivtv
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
-- System Information:
Debian Release: 7.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
ii firmware-ivtv 0.36+wheezy.1
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: