Bug#728668: linux-image-3.11-1-powerpc: nouveau kernel message every 10 seconds: E[ DRM] DDC responded, but no EDID for TV-1
Package: src:linux
Version: 3.11.6-2
Severity: normal
As you can see from the attached kernel log, the nouveau module is
reporting the same error message every 10 seconds.
This machine ("omega") is a 1GHz gooseneck powerpc G4 iMac.
I got the same error messages and behavior from 3.10-3-powerpc.
--dkg
-- Package-specific info:
** Version:
Linux version 3.11-1-powerpc (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-1) ) #1 Debian 3.11.6-2 (2013-11-01)
** Command line:
BOOT_IMAGE=/boot/vmlinux-3.11-1-powerpc root=/dev/mapper/vg_omega0-root ro init=/bin/systemd quiet
** Not tainted
** Kernel log:
[ 7.582461] ohci-pci 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 7.582529] ohci-pci 0001:10:18.0: irq 27, io mem 0x80082000
[ 7.582795] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 7.629639] Raw EDID:
[ 7.629667] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629677] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629686] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629694] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629703] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629712] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629721] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629730] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.629750] nouveau 0000:00:10.0: TV-1: EDID block 0 invalid.
[ 7.629762] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 7.657135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.657152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.657158] usb usb1: Product: OHCI PCI host controller
[ 7.657164] usb usb1: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.657170] usb usb1: SerialNumber: 0001:10:18.0
[ 7.657566] hub 1-0:1.0: USB hub found
[ 7.657588] hub 1-0:1.0: 2 ports detected
[ 7.657888] ohci-pci 0001:10:19.0: OHCI PCI host controller
[ 7.657908] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 7.657969] ohci-pci 0001:10:19.0: irq 28, io mem 0x80081000
[ 7.741352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.741370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.741376] usb usb2: Product: OHCI PCI host controller
[ 7.741382] usb usb2: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.741388] usb usb2: SerialNumber: 0001:10:19.0
[ 7.741780] hub 2-0:1.0: USB hub found
[ 7.741802] hub 2-0:1.0: 2 ports detected
[ 7.744343] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[ 7.744373] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 3
[ 7.744433] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80080000
[ 7.754878] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo efbca800
[ 7.855517] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.855523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.855526] usb usb3: Product: OHCI PCI host controller
[ 7.855530] usb usb3: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[ 7.855534] usb usb3: SerialNumber: 0001:10:1a.0
[ 7.858241] hub 3-0:1.0: USB hub found
[ 7.858262] hub 3-0:1.0: 2 ports detected
[ 7.885128] nouveau E[ DRM] Pixel clock comparison table not found
[ 8.056740] Console: switching to colour frame buffer device 180x56
[ 8.059488] nouveau 0000:00:10.0: fb0: nouveaufb frame buffer device
[ 8.059495] nouveau 0000:00:10.0: registered panic notifier
[ 8.059987] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:10.0 on minor 0
[ 8.073018] usb 1-2: new low-speed USB device number 2 using ohci-pci
[ 8.264418] b43legacy ssb0:0: firmware: agent aborted loading b43legacy/ucode4.fw (not found?)
[ 8.264652] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
[ 8.267190] usb 1-2: New USB device found, idVendor=1241, idProduct=1603
[ 8.267207] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.267213] usb 1-2: Product: USB Keyboard
[ 8.267219] usb 1-2: Manufacturer:
[ 8.451273] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.508850] usbcore: registered new interface driver usbhid
[ 8.508868] usbhid: USB HID core driver
[ 8.599782] input: USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2:1.0/input/input1
[ 8.600606] hid-generic 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0001:10:18.0-2/input0
[ 8.606478] input: USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2:1.1/input/input2
[ 8.610631] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0001:10:18.0-2/input1
[ 9.125058] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.593276] sungem_phy: PHY ID: 4061e4, addr: 0
[ 12.593640] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
[ 12.594035] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.001067] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 15.001197] gem 0002:20:0f.0 eth0: Pause is disabled
[ 15.001242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.566762] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 27.614586] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 37.662605] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 47.710583] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 57.758695] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 67.806703] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 77.854753] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 87.902640] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 97.950686] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 107.998606] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 118.046595] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 128.094615] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 138.142584] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 148.190584] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 158.238621] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 168.286581] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 178.334592] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 188.382711] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 198.430626] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 208.478596] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 218.526589] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 228.574601] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 238.623269] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 248.671140] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 258.718671] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 268.798571] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 278.846585] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 288.894601] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 298.942599] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 308.990639] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 319.038615] nouveau E[ DRM] DDC responded, but no EDID for TV-1
[ 329.086576] nouveau E[ DRM] DDC responded, but no EDID for TV-1
** Model information
revision : 3.3 (pvr 8001 0303)
platform : PowerMac
model : PowerMac6,1
machine : PowerMac6,1
motherboard : PowerMac6,1 MacRISC3 Power Macintosh
** Loaded modules:
hfs
hid_generic
usbhid
hid
evdev
ohci_pci
ohci_hcd
ehci_hcd
b43legacy
nouveau
mac80211
ttm
usbcore
cfg80211
rfkill
rng_core
drm_kms_helper
usb_common
drm
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sg
firewire_ohci
sungem
sd_mod
firewire_core
crc_itu_t
sungem_phy
crc_t10dif
sr_mod
cdrom
ssb
mmc_core
pcmcia
pcmcia_core
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 3.11-1-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-1-powerpc depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
Versions of packages linux-image-3.11-1-powerpc recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-1-powerpc suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.11 <none>
pn mkvmlinuz <none>
Versions of packages linux-image-3.11-1-powerpc is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-1-powerpc/prerm/removing-running-kernel-3.11-1-powerpc: true
linux-image-3.11-1-powerpc/postinst/depmod-error-initrd-3.11-1-powerpc: false
Reply to: