Bug#693942: linux-image-3.2.0-4-amd64: regression / high load confirmed after wheezy upgrade
Package: src:linux
Version: 3.2.51-1
Followup-For: Bug #693942
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Upgrading from squeeze to wheezy.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Downgrading back to squeeze's 2.6 kernel restored original load.
* What was the outcome of this action?
Upgrading frmo squeeze to wheezy led to an incread of the load from 0.39
average (over the year) to 2.15 (over the week following the upgrade).
We had some misconfigured Apache+mod_php plugins (xdebug was enabled), but
turning that off only restored the load to 1.40 (over the day), which is still
about an order of magnitude higher than the load before the upgrade.
Downgrading to the 2.6 kernel restored the original load (0.15 over the last 15
minutes so far).
You can see the various changes here:
http://stats.koumbit.net/cgi-bin/munin-cgi-graph/koumbit.net/ceres.koumbit.net/load-month.png
http://stats.koumbit.net/koumbit.net/ceres.koumbit.net/load.html
The machine was upgraded during "week 41" (october 10th). Yesterday we turned
off xdebug, which lowered the load a little, but not completely. Today we
downgraded back to linux 2.6, which restored the original load on the server.
also note how the CPU usage suddently bumped up after the upgrade:
http://stats.koumbit.net/koumbit.net/ceres.koumbit.net/cpu.html
The dip back down was when we disabled xdebug - but notice how the load was
higher even with the CPU usage lower. Also notice the small "softirq" (3%) bar
on top of the graph for the time the new kernel was deployed, which is gone now
that the old kernel is back.
* What outcome did you expect instead?
I expected the load to stay the same or improve after the upgrade.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Intel
product_name: S5400SF
product_version:
chassis_vendor: .....
chassis_version:
bios_vendor: Intel Corporation
bios_version: S5400.86B.07.00.0033.110920101742
board_vendor: Intel
board_name: S5400SF
board_version: FRU Ver 0.03
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 199.58.80.126
netmask 255.255.255.128
gateway 199.58.80.1
auto eth0:netel
iface eth0:netel inet static
address 209.44.112.126
netmask 255.255.255.192
broadcast 209.44.112.127
auto eth0:aegir
iface eth0:aegir inet static
address 209.44.112.106
netmask 255.255.255.192
broadcast 209.44.112.127
auto eth0:lb
iface eth0:lb inet static
address 199.58.80.106
netmask 255.255.255.128
auto eth0:koumbitorg
iface eth0:koumbitorg inet static
address 199.58.80.86
netmask 255.255.255.128
auto eth0:gmmq
iface eth0:gmmq inet static
address 199.58.80.119
netmask 255.255.255.128
auto eth0:spihq
iface eth0:spihq inet static
address 199.58.80.91
netmask 255.255.255.128
auto eth0:cdhal
iface eth0:cdhal inet static
address 199.58.80.85
netmask 255.255.255.128
auto eth0:cbpq
iface eth0:cbpq inet static
address 199.58.80.98
netmask 255.255.255.128
auto eth0:coopcoco
iface eth0:coopcoco inet static
address 199.58.80.120
netmask 255.255.255.128
auto eth0:514-289
iface eth0:514-289 inet static
address 199.58.80.117
netmask 255.255.255.128
auto eth0:pvq
iface eth0:pvq inet static
address 199.58.80.124
netmask 255.255.255.128
auto eth1
iface eth1 inet static
address 192.168.0.140
netmask 255.255.0.0
broadcast 192.168.255.255
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5400 Chipset Memory Controller Hub [8086:4003] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 5 [8086:4025] (rev 20) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 9 [8086:4029] (rev 20) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=07, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 98000000-989fffff
Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0f.0 System peripheral [0880]: Intel Corporation 5400 Chipset QuickData Technology Device [8086:402f] (rev 20)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
00:10.0 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5400_edac
00:10.1 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.3 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.4 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5400 Chipset CE/SF Registers [8086:4031] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4035] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4035] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4036] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4036] (rev 20)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 8080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 8060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at 8040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 8020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 98b05000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 98a00000-98afffff
Prefetchable memory behind bridge: 0000000090000000-0000000097ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller [8086:2680] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 98b04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 8000 [size=32]
Kernel driver in use: i801_smbus
02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 98000000-988fffff
Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=07, subordinate=07, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 98000000-988fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
06:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at 98820000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 98400000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 7020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
06:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 54
Region 0: Memory at 98800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 98000000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 7000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
08:0c.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:34d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 6000 [size=256]
Region 2: Memory at 98a00000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.2
APT prefers stable
APT policy: (500, 'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
* linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze4) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Sep 23 22:14:43 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ceres-root ro console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f921000 (usable)
[ 0.000000] BIOS-e820: 000000007f921000 - 000000007f9d2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f9d2000 - 000000007fa32000 (usable)
[ 0.000000] BIOS-e820: 000000007fa32000 - 000000007fa9a000 (reserved)
[ 0.000000] BIOS-e820: 000000007fa9a000 - 000000007fabb000 (usable)
[ 0.000000] BIOS-e820: 000000007fabb000 - 000000007fb1a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fb1a000 - 000000007fb24000 (usable)
[ 0.000000] BIOS-e820: 000000007fb24000 - 000000007fb3a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fb3a000 - 000000007fc00000 (usable)
[ 0.000000] BIOS-e820: 000000007fc00000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 00000000ffe0c000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000480000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x480000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 3F80000000 write-back
[ 0.000000] 1 base 0100000000 mask 3F00000000 write-back
[ 0.000000] 2 base 0200000000 mask 3E00000000 write-back
[ 0.000000] 3 base 0400000000 mask 3C00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fc00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fc00000
[ 0.000000] 0000000000 - 007fc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7fc00000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000480000000
[ 0.000000] 0100000000 - 0480000000 page 2M
[ 0.000000] kernel direct mapping tables up to 480000000 @ 9000-1c000
[ 0.000000] RAMDISK: 36d5e000 - 376a6908
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000007fb39120 0008C (v01 INTEL S5400SF 00000000 INTL 01000013)
[ 0.000000] ACPI: DMAR 000000007fb37000 00128 (v01 INTEL S5400SF 00000001 INTL 01000013)
[ 0.000000] ACPI: FACP 000000007fb35000 000F4 (v03 INTEL S5400SF 00000000 INTL 01000013)
[ 0.000000] ACPI: DSDT 000000007fb2e000 05664 (v02 INTEL S5400SF 00000008 INTL 01000013)
[ 0.000000] ACPI: FACS 000000007fabb000 00040
[ 0.000000] ACPI: APIC 000000007fb34000 000C8 (v01 INTEL S5400SF 00000000 INTL 01000013)
[ 0.000000] ACPI: SPCR 000000007fb2d000 00050 (v01 INTEL S5400SF 00000000 INTL 01000013)
[ 0.000000] ACPI: HPET 000000007fb2c000 00038 (v01 INTEL S5400SF 00000001 INTL 01000013)
[ 0.000000] ACPI: MCFG 000000007fb2b000 0003C (v01 INTEL S5400SF 00000001 INTL 01000013)
[ 0.000000] ACPI: SSDT 000000007fb2a000 00A14 (v02 INTEL EIST 00004000 INTL 01000013)
[ 0.000000] ACPI: SSDT 000000007fb29000 00193 (v02 INTEL IPMI 00004000 INTL 01000013)
[ 0.000000] ACPI: SSDT 000000007fb28000 002D4 (v02 INTEL CST 00004000 INTL 01000013)
[ 0.000000] ACPI: HEST 000000007fb27000 000A8 (v01 INTEL S5400SF 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 000000007fb26000 00030 (v01 INTEL S5400SF 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 000000007fb25000 00230 (v01 INTEL S5400SF 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 000000007fb24000 00130 (v01 INTEL S5400SF 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000480000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000480000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [0000000000100000 - 000000000018ffff] pages 90
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0480000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d7584] TEXT DATA BSS ==> [0001000000 - 00016d7584]
[ 0.000000] #3 [0036d5e000 - 00376a6908] RAMDISK ==> [0036d5e000 - 00376a6908]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [00016d8000 - 00016d8374] BRK ==> [00016d8000 - 00016d8374]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] #7 [0000009000 - 0000017000] PGTABLE ==> [0000009000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000fdbe0] fdbe0
[ 0.000000] [ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880001800000-ffff88000f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00480000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007f921
[ 0.000000] 0: 0x0007f9d2 -> 0x0007fa32
[ 0.000000] 0: 0x0007fa9a -> 0x0007fabb
[ 0.000000] 0: 0x0007fb1a -> 0x0007fb24
[ 0.000000] 0: 0x0007fb3a -> 0x0007fc00
[ 0.000000] 0: 0x00100000 -> 0x00480000
[ 0.000000] On node 0 totalpages: 4192783
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 117 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 504490 pages, LIFO batch:31
[ 0.000000] Normal zone: 50176 pages used for memmap
[ 0.000000] Normal zone: 3619840 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f921000 - 000000007f9d2000
[ 0.000000] PM: Registered nosave memory: 000000007fa32000 - 000000007fa9a000
[ 0.000000] PM: Registered nosave memory: 000000007fabb000 - 000000007fb1a000
[ 0.000000] PM: Registered nosave memory: 000000007fb24000 - 000000007fb3a000
[ 0.000000] PM: Registered nosave memory: 000000007fc00000 - 0000000090000000
[ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 00000000ffe0c000
[ 0.000000] PM: Registered nosave memory: 00000000ffe0c000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6fe00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa00000 s90392 r8192 d24296 u262144
[ 0.000000] pcpu-alloc: s90392 r8192 d24296 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128154
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/ceres-root ro console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000fbde000 - ffff880013bde000
[ 0.000000] software IO TLB at phys 0xfbde000 - 0x13bde000
[ 0.000000] Memory: 16457836k/18874368k available (3087k kernel code, 2103236k absent, 313296k reserved, 2036k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:880
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2991.895 MHz processor.
[ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5983.79 BogoMIPS (lpj=11967580)
[ 0.016019] Security Framework initialized
[ 0.020007] SELinux: Disabled at boot.
[ 0.025001] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.037749] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.044951] Mount-cache hash table entries: 256
[ 0.048171] Initializing cgroup subsys ns
[ 0.052005] Initializing cgroup subsys cpuacct
[ 0.056005] Initializing cgroup subsys devices
[ 0.060003] Initializing cgroup subsys freezer
[ 0.064003] Initializing cgroup subsys net_cls
[ 0.068026] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.076002] CPU: L2 cache: 6144K
[ 0.080004] CPU 0/0x0 -> Node 0
[ 0.083202] CPU: Physical Processor ID: 0
[ 0.084002] CPU: Processor Core ID: 0
[ 0.088004] mce: CPU supports 6 MCE banks
[ 0.092008] CPU0: Thermal monitoring enabled (TM2)
[ 0.096005] using mwait in idle threads.
[ 0.100003] Performance Events: Core2 events, Intel PMU driver.
[ 0.109726] ... version: 2
[ 0.112003] ... bit width: 40
[ 0.116003] ... generic registers: 2
[ 0.120003] ... value mask: 000000ffffffffff
[ 0.124003] ... max period: 000000007fffffff
[ 0.128003] ... fixed-purpose events: 3
[ 0.132003] ... event mask: 0000000700000003
[ 0.136820] ACPI: Core revision 20090903
[ 0.152159] DMAR: Host address width 38
[ 0.156004] DMAR: DRHD base: 0x000000fe714000 flags: 0x0
[ 0.160008] IOMMU fe714000: ver 1:0 cap 900800c250462 ecap e01
[ 0.164004] DMAR: DRHD base: 0x000000fe719000 flags: 0x0
[ 0.168007] IOMMU fe719000: ver 1:0 cap 900800c250462 ecap e01
[ 0.172004] DMAR: DRHD base: 0x000000fe71a000 flags: 0x0
[ 0.176006] IOMMU fe71a000: ver 1:0 cap 4900800c250462 ecap e01
[ 0.180004] DMAR: DRHD base: 0x000000fe718000 flags: 0x1
[ 0.184007] IOMMU fe718000: ver 1:0 cap 900800c250462 ecap e01
[ 0.188004] DMAR: RMRR base: 0x0000007fa49000 end: 0x0000007fa4cfff
[ 0.192004] DMAR: RMRR base: 0x0000007fa46000 end: 0x0000007fa49fff
[ 0.196004] DMAR: RMRR base: 0x0000007fa43000 end: 0x0000007fa46fff
[ 0.200004] DMAR: RMRR base: 0x0000007fa40000 end: 0x0000007fa43fff
[ 0.204004] DMAR: RMRR base: 0x0000007fa3d000 end: 0x0000007fa40fff
[ 0.208004] DMAR: No ATSR found
[ 0.212011] Setting APIC routing to flat
[ 0.216374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.262889] CPU0: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.272001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 1/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.012000] CPU1: Thermal monitoring enabled (TM2)
[ 0.360121] CPU1: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.369292] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.372071] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 2/0x4 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 1
[ 0.012000] CPU: Processor Core ID: 0
[ 0.012000] CPU2: Thermal monitoring enabled (TM2)
[ 0.468098] CPU2: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.477301] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.480060] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.012000] Initializing CPU#3
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 3/0x6 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 1
[ 0.012000] CPU: Processor Core ID: 2
[ 0.012000] CPU3: Thermal monitoring enabled (TM2)
[ 0.576089] CPU3: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.585292] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.588064] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#4
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 4/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU4: Thermal monitoring enabled (TM2)
[ 0.684061] CPU4: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.693293] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.696118] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.012000] Initializing CPU#5
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 5/0x3 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 3
[ 0.012000] CPU5: Thermal monitoring enabled (TM2)
[ 0.792089] CPU5: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.801302] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.804074] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.012000] Initializing CPU#6
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 6/0x5 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 1
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU6: Thermal monitoring enabled (TM2)
[ 0.900092] CPU6: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 0.909293] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.912066] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.012000] Initializing CPU#7
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 6144K
[ 0.012000] CPU 7/0x7 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 1
[ 0.012000] CPU: Processor Core ID: 3
[ 0.012000] CPU7: Thermal monitoring enabled (TM2)
[ 1.008082] CPU7: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz stepping 0a
[ 1.017295] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 1.020019] Brought up 8 CPUs
[ 1.023048] Total of 8 processors activated (47879.38 BogoMIPS).
[ 1.028073] CPU0 attaching sched-domain:
[ 1.028077] domain 0: span 0,4 level MC
[ 1.028079] groups: group ffff88000fa0fbf0 cpus 0 group ffff88000fb0fbf0 cpus 4
[ 1.028084] domain 1: span 0-7 level CPU
[ 1.028085] groups: group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048)
[ 1.028095] CPU1 attaching sched-domain:
[ 1.028097] domain 0: span 1,5 level MC
[ 1.028098] groups: group ffff88000fa4fbf0 cpus 1 group ffff88000fb4fbf0 cpus 5
[ 1.028101] domain 1: span 0-7 level CPU
[ 1.028103] groups: group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048)
[ 1.028111] CPU2 attaching sched-domain:
[ 1.028112] domain 0: span 2,6 level MC
[ 1.028114] groups: group ffff88000fa8fbf0 cpus 2 group ffff88000fb8fbf0 cpus 6
[ 1.028117] domain 1: span 0-7 level CPU
[ 1.028118] groups: group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048)
[ 1.028127] CPU3 attaching sched-domain:
[ 1.028128] domain 0: span 3,7 level MC
[ 1.028129] groups: group ffff88000facfbf0 cpus 3 group ffff88000fbcfbf0 cpus 7
[ 1.028132] domain 1: span 0-7 level CPU
[ 1.028134] groups: group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048)
[ 1.028142] CPU4 attaching sched-domain:
[ 1.028143] domain 0: span 0,4 level MC
[ 1.028145] groups: group ffff88000fb0fbf0 cpus 4 group ffff88000fa0fbf0 cpus 0
[ 1.028148] domain 1: span 0-7 level CPU
[ 1.028149] groups: group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048)
[ 1.028157] CPU5 attaching sched-domain:
[ 1.028158] domain 0: span 1,5 level MC
[ 1.028159] groups: group ffff88000fb4fbf0 cpus 5 group ffff88000fa4fbf0 cpus 1
[ 1.028163] domain 1: span 0-7 level CPU
[ 1.028164] groups: group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048)
[ 1.028172] CPU6 attaching sched-domain:
[ 1.028173] domain 0: span 2,6 level MC
[ 1.028175] groups: group ffff88000fb8fbf0 cpus 6 group ffff88000fa8fbf0 cpus 2
[ 1.028178] domain 1: span 0-7 level CPU
[ 1.028179] groups: group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048) group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048)
[ 1.028187] CPU7 attaching sched-domain:
[ 1.028189] domain 0: span 3,7 level MC
[ 1.028190] groups: group ffff88000fbcfbf0 cpus 7 group ffff88000facfbf0 cpus 3
[ 1.028193] domain 1: span 0-7 level CPU
[ 1.028195] groups: group ffff88000facfd00 cpus 3,7 (cpu_power = 2048) group ffff88000fa0fd00 cpus 0,4 (cpu_power = 2048) group ffff88000fa4fd00 cpus 1,5 (cpu_power = 2048) group ffff88000fa8fd00 cpus 2,6 (cpu_power = 2048)
[ 1.032071] devtmpfs: initialized
[ 1.038456] regulator: core version 0.5
[ 1.040049] NET: Registered protocol family 16
[ 1.044087] ACPI: bus type pci registered
[ 1.048094] PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
[ 1.052005] PCI: MCFG area at 80000000 reserved in E820
[ 1.066559] PCI: Using MMCONFIG at 80000000 - 8fffffff
[ 1.068005] PCI: Using configuration type 1 for base access
[ 1.072618] bio: create slab <bio-0> at 0
[ 1.076354] ACPI: EC: Look up EC in DSDT
[ 1.080596] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596)
[ 1.088006] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88047e44be20), AE_AML_BUFFER_LIMIT
[ 1.104543] ACPI: Interpreter enabled
[ 1.108006] ACPI: (supports S0 S1 S4 S5)
[ 1.112346] ACPI: Using IOAPIC for interrupt routing
[ 1.121292] ACPI: No dock devices found.
[ 1.126293] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.128071] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.132006] pci 0000:00:00.0: PME# disabled
[ 1.136055] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.140006] pci 0000:00:05.0: PME# disabled
[ 1.144053] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.148011] pci 0000:00:09.0: PME# disabled
[ 1.152030] pci 0000:00:0f.0: reg 10 64bit mmio: [0xfe700000-0xfe703fff]
[ 1.156097] pci 0000:00:1d.0: reg 20 io port: [0x8080-0x809f]
[ 1.156140] pci 0000:00:1d.1: reg 20 io port: [0x8060-0x807f]
[ 1.156182] pci 0000:00:1d.2: reg 20 io port: [0x8040-0x805f]
[ 1.156224] pci 0000:00:1d.3: reg 20 io port: [0x8020-0x803f]
[ 1.156271] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98b05000-0x98b053ff]
[ 1.156326] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.160007] pci 0000:00:1d.7: PME# disabled
[ 1.164130] pci 0000:00:1f.2: reg 10 io port: [0x3000-0x3007]
[ 1.164135] pci 0000:00:1f.2: reg 14 io port: [0x5000-0x5003]
[ 1.164139] pci 0000:00:1f.2: reg 18 io port: [0x2000-0x2007]
[ 1.164144] pci 0000:00:1f.2: reg 1c io port: [0x4000-0x4003]
[ 1.164148] pci 0000:00:1f.2: reg 20 io port: [0x1000-0x100f]
[ 1.164153] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98b04000-0x98b043ff]
[ 1.164175] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.168007] pci 0000:00:1f.2: PME# disabled
[ 1.172043] pci 0000:00:1f.3: reg 20 io port: [0x8000-0x801f]
[ 1.173619] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.176007] pci 0000:02:00.0: PME# disabled
[ 1.181888] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 1.184007] pci 0000:02:00.3: PME# disabled
[ 1.188465] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.192355] pci 0000:00:09.0: bridge io port: [0x7000-0x7fff]
[ 1.192358] pci 0000:00:09.0: bridge 32bit mmio: [0x98000000-0x989fffff]
[ 1.197426] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.200007] pci 0000:03:00.0: PME# disabled
[ 1.208188] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.213659] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[ 1.216007] pci 0000:03:01.0: PME# disabled
[ 1.220329] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.225660] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 1.228007] pci 0000:03:02.0: PME# disabled
[ 1.232328] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.236695] pci 0000:02:00.0: bridge io port: [0x7000-0x7fff]
[ 1.236741] pci 0000:02:00.0: bridge 32bit mmio: [0x98000000-0x988fffff]
[ 1.243354] pci 0000:06:00.0: reg 10 32bit mmio: [0x98820000-0x9883ffff]
[ 1.243537] pci 0000:06:00.0: reg 14 32bit mmio: [0x98400000-0x987fffff]
[ 1.243721] pci 0000:06:00.0: reg 18 io port: [0x7020-0x703f]
[ 1.246115] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.248052] pci 0000:06:00.0: PME# disabled
[ 1.253659] pci 0000:06:00.1: reg 10 32bit mmio: [0x98800000-0x9881ffff]
[ 1.253842] pci 0000:06:00.1: reg 14 32bit mmio: [0x98000000-0x983fffff]
[ 1.254026] pci 0000:06:00.1: reg 18 io port: [0x7000-0x701f]
[ 1.256921] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 1.260052] pci 0000:06:00.1: PME# disabled
[ 1.268462] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.276601] pci 0000:03:02.0: bridge io port: [0x7000-0x7fff]
[ 1.276647] pci 0000:03:02.0: bridge 32bit mmio: [0x98000000-0x988fffff]
[ 1.279074] pci 0000:08:0c.0: reg 10 32bit mmio pref: [0x90000000-0x97ffffff]
[ 1.279080] pci 0000:08:0c.0: reg 14 io port: [0x6000-0x60ff]
[ 1.279086] pci 0000:08:0c.0: reg 18 32bit mmio: [0x98a00000-0x98a0ffff]
[ 1.279110] pci 0000:08:0c.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 1.279141] pci 0000:08:0c.0: supports D1 D2
[ 1.279172] pci 0000:00:1e.0: transparent bridge
[ 1.280007] pci 0000:00:1e.0: bridge io port: [0x6000-0x6fff]
[ 1.280010] pci 0000:00:1e.0: bridge 32bit mmio: [0x98a00000-0x98afffff]
[ 1.280015] pci 0000:00:1e.0: bridge 64bit mmio pref: [0x90000000-0x97ffffff]
[ 1.280027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.284269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 1.284309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 1.284392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 1.284424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT]
[ 1.284475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
[ 1.284575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
[ 1.284634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT]
[ 1.284685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
[ 1.288709] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
[ 1.293709] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
[ 1.301229] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
[ 1.305679] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
[ 1.309709] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
[ 1.316081] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
[ 1.321692] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
[ 1.328484] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
[ 1.333698] vgaarb: device added: PCI:0000:08:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.336006] vgaarb: loaded
[ 1.340055] PCI: Using ACPI for IRQ routing
[ 1.344740] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.348009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.353153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.368028] Switching to clocksource tsc
[ 1.373340] pnp: PnP ACPI init
[ 1.376493] ACPI: bus type pnp registered
[ 1.384419] pnp: PnP ACPI: found 14 devices
[ 1.388671] ACPI: ACPI bus type pnp unregistered
[ 1.393360] system 00:01: iomem range 0x80000000-0x8fffffff has been reserved
[ 1.400565] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.407764] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[ 1.415329] system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.422892] system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.430088] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 1.437289] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 1.444493] system 00:06: ioport range 0x500-0x53f has been reserved
[ 1.450910] system 00:06: ioport range 0x400-0x47f has been reserved
[ 1.457333] system 00:06: ioport range 0x800-0x87f has been reserved
[ 1.463749] system 00:06: ioport range 0xca2-0xca7 has been reserved
[ 1.470168] system 00:06: ioport range 0xca8-0xcaf has been reserved
[ 1.476593] system 00:06: ioport range 0x161-0x161 has been reserved
[ 1.483009] system 00:06: ioport range 0x162-0x162 has been reserved
[ 1.489434] system 00:06: iomem range 0x400-0x4ff could not be reserved
[ 1.501913] pci 0000:00:05.0: PCI bridge, secondary bus 0000:01
[ 1.507898] pci 0000:00:05.0: IO window: disabled
[ 1.512846] pci 0000:00:05.0: MEM window: disabled
[ 1.517878] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.523343] pci 0000:03:00.0: BAR 14: can't allocate mem resource [0x98900000-0x988fffff]
[ 1.531597] pci 0000:03:00.0: BAR 13: can't allocate I/O resource [0x8000-0x7fff]
[ 1.539159] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.545142] pci 0000:03:00.0: IO window: disabled
[ 1.550133] pci 0000:03:00.0: MEM window: disabled
[ 1.555165] pci 0000:03:00.0: PREFETCH window: 0x00000098c00000-0x00000098dfffff
[ 1.569254] pci 0000:03:01.0: PCI bridge, secondary bus 0000:05
[ 1.575234] pci 0000:03:01.0: IO window: disabled
[ 1.580221] pci 0000:03:01.0: MEM window: disabled
[ 1.585255] pci 0000:03:01.0: PREFETCH window: disabled
[ 1.590769] pci 0000:03:02.0: PCI bridge, secondary bus 0000:06
[ 1.596754] pci 0000:03:02.0: IO window: 0x7000-0x7fff
[ 1.602180] pci 0000:03:02.0: MEM window: 0x98000000-0x988fffff
[ 1.608341] pci 0000:03:02.0: PREFETCH window: disabled
[ 1.613854] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 1.619838] pci 0000:02:00.0: IO window: 0x7000-0x7fff
[ 1.625259] pci 0000:02:00.0: MEM window: 0x98000000-0x988fffff
[ 1.631417] pci 0000:02:00.0: PREFETCH window: 0x00000098c00000-0x00000098dfffff
[ 1.639113] pci 0000:02:00.3: PCI bridge, secondary bus 0000:07
[ 1.645099] pci 0000:02:00.3: IO window: disabled
[ 1.650089] pci 0000:02:00.3: MEM window: disabled
[ 1.655122] pci 0000:02:00.3: PREFETCH window: disabled
[ 1.660632] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 1.666613] pci 0000:00:09.0: IO window: 0x7000-0x7fff
[ 1.671988] pci 0000:00:09.0: MEM window: 0x98000000-0x989fffff
[ 1.678142] pci 0000:00:09.0: PREFETCH window: 0x00000098c00000-0x00000098dfffff
[ 1.685795] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 1.691782] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 1.697165] pci 0000:00:1e.0: MEM window: 0x98a00000-0x98afffff
[ 1.703327] pci 0000:00:1e.0: PREFETCH window: 0x00000090000000-0x00000097ffffff
[ 1.710988] alloc irq_desc for 16 on node -1
[ 1.710990] alloc kstat_irqs on node -1
[ 1.710995] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.717757] pci 0000:00:05.0: setting latency timer to 64
[ 1.717762] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.724544] pci 0000:00:09.0: setting latency timer to 64
[ 1.724640] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.731404] pci 0000:02:00.0: setting latency timer to 64
[ 1.731587] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.738356] pci 0000:03:00.0: setting latency timer to 64
[ 1.738540] pci 0000:03:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.745306] pci 0000:03:01.0: setting latency timer to 64
[ 1.745489] pci 0000:03:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.752303] pci 0000:03:02.0: setting latency timer to 64
[ 1.752533] pci 0000:02:00.3: setting latency timer to 64
[ 1.752581] pci 0000:00:1e.0: setting latency timer to 64
[ 1.752585] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.752586] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.752588] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff]
[ 1.752590] pci_bus 0000:02: resource 1 mem: [0x98000000-0x989fffff]
[ 1.752592] pci_bus 0000:02: resource 2 pref mem [0x98c00000-0x98dfffff]
[ 1.752593] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 1.752595] pci_bus 0000:03: resource 1 mem: [0x98000000-0x988fffff]
[ 1.752596] pci_bus 0000:03: resource 2 pref mem [0x98c00000-0x98dfffff]
[ 1.752598] pci_bus 0000:04: resource 2 pref mem [0x98c00000-0x98dfffff]
[ 1.752600] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff]
[ 1.752601] pci_bus 0000:06: resource 1 mem: [0x98000000-0x988fffff]
[ 1.752603] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
[ 1.752605] pci_bus 0000:08: resource 1 mem: [0x98a00000-0x98afffff]
[ 1.752606] pci_bus 0000:08: resource 2 pref mem [0x90000000-0x97ffffff]
[ 1.752608] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 1.752609] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.752639] NET: Registered protocol family 2
[ 1.757395] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.766030] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.777325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.784592] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.791276] TCP reno registered
[ 1.794620] NET: Registered protocol family 1
[ 1.799087] alloc irq_desc for 23 on node -1
[ 1.799089] alloc kstat_irqs on node -1
[ 1.799098] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.805875] pci 0000:00:1d.0: PCI INT A disabled
[ 1.810556] alloc irq_desc for 22 on node -1
[ 1.810557] alloc kstat_irqs on node -1
[ 1.810560] pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.817335] pci 0000:00:1d.1: PCI INT B disabled
[ 1.822020] pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 1.828802] pci 0000:00:1d.2: PCI INT C disabled
[ 1.833485] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 1.840264] pci 0000:00:1d.3: PCI INT D disabled
[ 1.844951] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.851842] pci 0000:00:1d.7: PCI INT A disabled
[ 1.856532] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 1.862788] pci 0000:08:0c.0: Boot video device
[ 1.862836] Unpacking initramfs...
[ 2.028061] Freeing initrd memory: 9506k freed
[ 2.036276] audit: initializing netlink socket (disabled)
[ 2.041769] type=2000 audit(1382198299.040:1): initialized
[ 2.050662] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.058460] VFS: Disk quotas dquot_6.5.2
[ 2.062491] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.069302] msgmni has been set to 32162
[ 2.073809] alg: No test for stdrng (krng)
[ 2.078034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.085503] io scheduler noop registered
[ 2.089496] io scheduler anticipatory registered
[ 2.094175] io scheduler deadline registered
[ 2.098545] io scheduler cfq registered (default)
[ 2.103428] alloc irq_desc for 48 on node -1
[ 2.103430] alloc kstat_irqs on node -1
[ 2.103440] pcieport 0000:00:05.0: irq 48 for MSI/MSI-X
[ 2.103445] pcieport 0000:00:05.0: setting latency timer to 64
[ 2.103515] alloc irq_desc for 49 on node -1
[ 2.103517] alloc kstat_irqs on node -1
[ 2.103525] pcieport 0000:00:09.0: irq 49 for MSI/MSI-X
[ 2.103529] pcieport 0000:00:09.0: setting latency timer to 64
[ 2.104314] pcieport 0000:02:00.0: setting latency timer to 64
[ 2.106243] alloc irq_desc for 50 on node -1
[ 2.106244] alloc kstat_irqs on node -1
[ 2.106379] pcieport 0000:03:00.0: irq 50 for MSI/MSI-X
[ 2.106517] pcieport 0000:03:00.0: setting latency timer to 64
[ 2.108400] alloc irq_desc for 51 on node -1
[ 2.108401] alloc kstat_irqs on node -1
[ 2.108536] pcieport 0000:03:01.0: irq 51 for MSI/MSI-X
[ 2.108674] pcieport 0000:03:01.0: setting latency timer to 64
[ 2.110559] alloc irq_desc for 52 on node -1
[ 2.110561] alloc kstat_irqs on node -1
[ 2.110696] pcieport 0000:03:02.0: irq 52 for MSI/MSI-X
[ 2.110834] pcieport 0000:03:02.0: setting latency timer to 64
[ 2.111632] aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.111637] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.112740] Linux agpgart interface v0.103
[ 2.116937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.123349] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.129507] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.135800] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.141546] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.147314] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.155181] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.165864] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.170909] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.176148] mice: PS/2 mouse device common for all mice
[ 2.181479] rtc_cmos 00:03: RTC can wake from S4
[ 2.186203] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.192384] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.199245] cpuidle: using governor ladder
[ 2.203405] cpuidle: using governor menu
[ 2.207398] No iBFT detected.
[ 2.210676] TCP cubic registered
[ 2.214060] NET: Registered protocol family 10
[ 2.219122] Mobile IPv6
[ 2.221633] NET: Registered protocol family 17
[ 2.226203] PM: Resume from disk failed.
[ 2.226214] registered taskstats version 1
[ 2.233933] rtc_cmos 00:03: setting system clock to 2013-10-19 15:58:20 UTC (1382198300)
[ 2.242145] Initalizing network drop monitor service
[ 2.247216] Freeing unused kernel memory: 592k freed
[ 2.252358] Write protecting the kernel read-only data: 4236k
[ 2.269483] udev[117]: starting version 164
[ 2.284206] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 2.290281] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.296423] usbcore: registered new interface driver usbfs
[ 2.297946] alloc irq_desc for 18 on node -1
[ 2.297948] alloc kstat_irqs on node -1
[ 2.297958] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.298490] e1000e 0000:06:00.0: setting latency timer to 64
[ 2.309093] usbcore: registered new interface driver hub
[ 2.309839] alloc irq_desc for 53 on node -1
[ 2.309840] alloc kstat_irqs on node -1
[ 2.310066] e1000e 0000:06:00.0: irq 53 for MSI/MSI-X
[ 2.314571] usbcore: registered new device driver usb
[ 2.320887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.327531] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.329277] SCSI subsystem initialized
[ 2.338472] libata version 3.00 loaded.
[ 2.338611] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.338615] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.343947] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.351483] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.359975] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.359991] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98b05000
[ 2.369248] e1000e 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:4f:09:44
[ 2.377346] e1000e 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.384260] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.384276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.384278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.384279] usb usb1: Product: EHCI Host Controller
[ 2.384280] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.384281] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.384365] usb usb1: configuration #1 chosen from 1 choice
[ 2.384387] hub 1-0:1.0: USB hub found
[ 2.384392] hub 1-0:1.0: 8 ports detected
[ 2.384458] ata_piix 0000:00:1f.2: version 2.13
[ 2.384474] alloc irq_desc for 20 on node -1
[ 2.384476] alloc kstat_irqs on node -1
[ 2.384486] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.384491] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.384542] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.384638] scsi0 : ata_piix
[ 2.384733] scsi1 : ata_piix
[ 2.386170] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 2.386172] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 2.397692] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.397751] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.397761] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.397763] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.397769] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.397797] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008080
[ 2.397830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.397831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.397833] usb usb2: Product: UHCI Host Controller
[ 2.397834] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.397835] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.397884] usb usb2: configuration #1 chosen from 1 choice
[ 2.397902] hub 2-0:1.0: USB hub found
[ 2.397906] hub 2-0:1.0: 2 ports detected
[ 2.397944] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.397950] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.397952] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.397958] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.397989] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008060
[ 2.398016] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.398017] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.398018] usb usb3: Product: UHCI Host Controller
[ 2.398019] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.398020] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.398060] usb usb3: configuration #1 chosen from 1 choice
[ 2.398085] hub 3-0:1.0: USB hub found
[ 2.398090] hub 3-0:1.0: 2 ports detected
[ 2.398128] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.398134] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.398136] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.398141] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.398169] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00008040
[ 2.398193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.398195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.398196] usb usb4: Product: UHCI Host Controller
[ 2.398197] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.398198] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.398238] usb usb4: configuration #1 chosen from 1 choice
[ 2.398257] hub 4-0:1.0: USB hub found
[ 2.398262] hub 4-0:1.0: 2 ports detected
[ 2.398298] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.398304] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.398306] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.398312] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.398337] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00008020
[ 2.398361] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.398363] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.398364] usb usb5: Product: UHCI Host Controller
[ 2.398365] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.398366] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.398407] usb usb5: configuration #1 chosen from 1 choice
[ 2.398427] hub 5-0:1.0: USB hub found
[ 2.398431] hub 5-0:1.0: 2 ports detected
[ 2.552918] ata2.00: ATA-9: M4-CT512M4SSD1, 040H, max UDMA/100
[ 2.552921] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.557652] ata1.00: ATA-9: M4-CT512M4SSD1, 040H, max UDMA/100
[ 2.557656] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.567409] ata2.01: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 2.567412] ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.569228] ata1.01: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 2.569231] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.581191] ata1.00: configured for UDMA/100
[ 2.581194] ata2.00: configured for UDMA/100
[ 2.598508] ata1.01: configured for UDMA/133
[ 2.598638] scsi 0:0:0:0: Direct-Access ATA M4-CT512M4SSD1 040H PQ: 0 ANSI: 5
[ 2.598763] scsi 0:0:1:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 2.601035] ata2.01: configured for UDMA/133
[ 2.601100] scsi 1:0:0:0: Direct-Access ATA M4-CT512M4SSD1 040H PQ: 0 ANSI: 5
[ 2.601205] scsi 1:0:1:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 2.606110] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 2.606141] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.606180] sd 0:0:0:0: [sda] Write Protect is off
[ 2.606182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.606198] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.606353] sda:
[ 2.606561] sd 1:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 2.606592] sd 1:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.606688] sda1 sda2
[ 2.606697] sd 1:0:0:0: [sdc] Write Protect is off
[ 2.606699] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.606703] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.606705] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.606718] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.606724] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.631994] sd 1:0:1:0: [sdd] Write Protect is off
[ 2.631996] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.632011] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.948993] e1000e 0000:06:00.0: eth0: MAC: 5, PHY: 5, PBA No: 201000-000
[ 2.949077] sdc:
[ 2.949230] sdb:
[ 2.949385] sdd: sdc1 sdc2
[ 2.955754] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.967349] sdd1
[ 2.967461] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 2.967499] alloc irq_desc for 19 on node -1
[ 2.967501] alloc kstat_irqs on node -1
[ 2.967506] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.968047] e1000e 0000:06:00.1: setting latency timer to 64
[ 2.981129]
[ 2.981973] alloc irq_desc for 54 on node -1
[ 2.981975] alloc kstat_irqs on node -1
[ 2.982187] e1000e 0000:06:00.1: irq 54 for MSI/MSI-X
[ 2.982749] sdb1
[ 2.982914] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 2.989487]
[ 2.991275] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.042064] e1000e 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:4f:09:45
[ 3.050175] e1000e 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
[ 3.057396] e1000e 0000:06:00.1: eth1: MAC: 5, PHY: 5, PBA No: 201000-000
[ 3.195491] md: raid1 personality registered for level 1
[ 3.204205] mdadm: sending ioctl 1261 to a partition!
[ 3.209513] mdadm: sending ioctl 1261 to a partition!
[ 3.217788] mdadm: sending ioctl 1261 to a partition!
[ 3.223756] mdadm: sending ioctl 1261 to a partition!
[ 3.230401] mdadm: sending ioctl 1261 to a partition!
[ 3.236636] mdadm: sending ioctl 1261 to a partition!
[ 3.243253] mdadm: sending ioctl 1261 to a partition!
[ 3.249529] mdadm: sending ioctl 1261 to a partition!
[ 3.256131] mdadm: sending ioctl 1261 to a partition!
[ 3.262406] mdadm: sending ioctl 1261 to a partition!
[ 3.282220] md: md0 stopped.
[ 3.286783] md: bind<sda2>
[ 3.289817] md: bind<sdc2>
[ 3.293511] raid1: raid set md0 active with 2 out of 2 mirrors
[ 3.299423] md0: detected capacity change from 0 to 499077021696
[ 3.306275] md0: unknown partition table
[ 3.321451] md: md1 stopped.
[ 3.325530] md: bind<sda1>
[ 3.328802] md: bind<sdc1>
[ 3.332459] raid1: raid set md1 active with 2 out of 2 mirrors
[ 3.338378] md1: detected capacity change from 0 to 1019805696
[ 3.345016] md1: unknown partition table
[ 3.354004] md: md2 stopped.
[ 3.358114] md: bind<sdd1>
[ 3.363741] md: bind<sdb1>
[ 3.367540] raid1: raid set md2 active with 2 out of 2 mirrors
[ 3.373479] md2: detected capacity change from 0 to 500104029184
[ 3.380340] md2: unknown partition table
[ 3.385313] device-mapper: uevent: version 1.0.3
[ 3.385541] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.512764] PM: Starting manual resume from disk
[ 3.517820] PM: Resume from partition 253:1
[ 3.517821] PM: Checking hibernation image.
[ 3.521759] PM: Error -22 checking image file
[ 3.521761] PM: Resume from disk failed.
[ 3.531329] kjournald starting. Commit interval 5 seconds
[ 3.531336] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.777893] <30>udevd[539]: starting version 175
[ 3.803063] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.806254] Marking TSC unstable due to TSC halts in idle
[ 3.806346] processor LNXCPU:00: registered as cooling_device0
[ 3.806574] processor LNXCPU:01: registered as cooling_device1
[ 3.806740] processor LNXCPU:02: registered as cooling_device2
[ 3.807350] dca service started, version 1.12.1
[ 3.807623] processor LNXCPU:03: registered as cooling_device3
[ 3.807800] processor LNXCPU:04: registered as cooling_device4
[ 3.807954] processor LNXCPU:05: registered as cooling_device5
[ 3.808088] processor LNXCPU:06: registered as cooling_device6
[ 3.812919] Switching to clocksource hpet
[ 3.818730] EDAC MC: Ver: 2.1.0 Sep 23 2013
[ 3.824031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.877730] processor LNXCPU:07: registered as cooling_device7
[ 3.877983] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.879603] ACPI: Power Button [PWRB]
[ 3.880217] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 3.880279] ioatdma 0000:00:0f.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.895919] [drm] Initialized drm 1.1.0 20060810
[ 3.907912] intel_rng: Firmware space is locked read-only. If you can't or
[ 3.907914] intel_rng: don't want to disable this in firmware setup, and if
[ 3.907915] intel_rng: you are certain that your system has a functional
[ 3.907915] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 3.912208] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.945352] ioatdma 0000:00:0f.0: setting latency timer to 64
[ 3.945450] alloc irq_desc for 55 on node -1
[ 3.945452] alloc kstat_irqs on node -1
[ 3.945462] ioatdma 0000:00:0f.0: irq 55 for MSI/MSI-X
[ 3.945464] alloc irq_desc for 56 on node -1
[ 3.945465] alloc kstat_irqs on node -1
[ 3.945468] ioatdma 0000:00:0f.0: irq 56 for MSI/MSI-X
[ 3.945470] alloc irq_desc for 57 on node -1
[ 3.945471] alloc kstat_irqs on node -1
[ 3.945474] ioatdma 0000:00:0f.0: irq 57 for MSI/MSI-X
[ 3.945475] alloc irq_desc for 58 on node -1
[ 3.945476] alloc kstat_irqs on node -1
[ 3.945479] ioatdma 0000:00:0f.0: irq 58 for MSI/MSI-X
[ 3.945520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.945946] ioatdma 0000:00:0f.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA
[ 3.946079] EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
[ 3.946099] EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 3.946222] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 3.947729] [drm] radeon defaulting to userspace modesetting.
[ 3.947921] alloc irq_desc for 17 on node -1
[ 3.947923] alloc kstat_irqs on node -1
[ 3.947933] pci 0000:08:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.000141] [drm] Initialized radeon 1.32.0 20080528 for 0000:08:0c.0 on minor 0
[ 4.000277] ACPI: Power Button [PWRF]
[ 4.022548] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.033108] iTCO_vendor_support: vendor-support=0
[ 4.039295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 4.045152] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0460)
[ 4.053137] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.417711] EXT3 FS on dm-0, internal journal
[ 4.440891] loop: module loaded
[ 4.885667] Adding 3997688k swap on /dev/mapper/ceres-swap. Priority:-1 extents:1 across:3997688k
[ 5.014184] kjournald starting. Commit interval 5 seconds
[ 5.014462] EXT3 FS on dm-6, internal journal
[ 5.014468] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.031265] kjournald starting. Commit interval 5 seconds
[ 5.031464] EXT3 FS on dm-3, internal journal
[ 5.031468] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.048256] kjournald starting. Commit interval 5 seconds
[ 5.048479] EXT3 FS on dm-5, internal journal
[ 5.048483] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.065318] kjournald starting. Commit interval 5 seconds
[ 5.065530] EXT3 FS on dm-4, internal journal
[ 5.065537] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.411380] e1000e 0000:06:00.0: irq 53 for MSI/MSI-X
[ 5.466822] e1000e 0000:06:00.0: irq 53 for MSI/MSI-X
[ 5.469552] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.183627] e1000e 0000:06:00.1: irq 54 for MSI/MSI-X
[ 6.239064] e1000e 0000:06:00.1: irq 54 for MSI/MSI-X
[ 6.241799] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.458884] RPC: Registered udp transport module.
[ 6.463671] RPC: Registered tcp transport module.
[ 6.468452] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.485392] Slow work thread pool: Starting up
[ 6.490062] Slow work thread pool: Ready
[ 6.494107] FS-Cache: Loaded
[ 6.509454] FS-Cache: Netfs 'nfs' registered for caching
[ 6.525044] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.669922] fuse init (API version 7.13)
Reply to: