Bug#725391: Null pointer dereference in sg_scsi_ioctl after hot-plugging a disk
Package: src:linux
Version: 3.2.46-1
Severity: normal
Tags: patch upstream
I just swapped a SATA disk on this computer, and smartctl then
triggered a null pointer dereference in sg_scsi_ioctl.
It looks like there are fixes for it here:
http://thread.gmane.org/gmane.linux.scsi/80934/focus=82217
But these have not yet been applied upstream.
Ben.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/shadbolt2-root ro
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[7438462.004682] ata4: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[7438462.010550] ata4: irq_stat 0x00400000, PHY RDY changed
[7438462.016325] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B }
[7438462.022064] ata4: hard resetting link
[7438462.744220] ata4: SATA link down (SStatus 0 SControl 300)
[7438467.744195] ata4: hard resetting link
[7438468.064208] ata4: SATA link down (SStatus 0 SControl 300)
[7438468.064230] ata4: limiting SATA link speed to 1.5 Gbps
[7438471.002286] IN=wl0 OUT= MAC= SRC=192.168.4.1 DST=192.168.4.255 LEN=263 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=243
[7438473.064211] ata4: hard resetting link
[7438473.384223] ata4: SATA link down (SStatus 0 SControl 310)
[7438473.384243] ata4.00: disabled
[7438473.389926] ata4: EH complete
[7438473.389963] ata4.00: detaching (SCSI 3:0:0:0)
[7438473.390297] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[7438473.396409] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[7438473.403307] sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[7438473.403320] sd 3:0:0:0: [sdc] Stopping disk
[7438473.409215] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[7438473.409235] sd 3:0:0:0: [sdc] START_STOP FAILED
[7438473.409241] sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[7438473.420946] BUG: unable to handle kernel NULL pointer dereference at 0000000000000118
[7438473.424772] IP: [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb
[7438473.432138] PGD 73957067 PUD 370bb067 PMD 0
[7438473.432138] Oops: 0000 [#1] SMP
[7438473.432138] CPU 0
[7438473.432138] Modules linked in: e1000e ebtable_nat ebtables ipt_REDIRECT ipt_MASQUERADE xt_multiport nf_conntrack_ipv6 nf_defrag_ipv6 xt_state xt_tcpudp xt_mac ip6t_REJECT ipt_REJECT ip6t_LOG ipt_LOG iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables x_tables sch_tbf ppp_deflate zlib_deflate bsd_comp parport_pc ppdev lp parport cpufreq_conservative cpufreq_powersave cpufreq_stats cpufreq_userspace nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc sit tunnel4 ppp_async crc_ccitt ppp_generic slhc ext3 jbd hwmon_vid kvm_amd kvm radeon snd_pcm ttm snd_page_alloc snd_timer drm_kms_helper snd soundcore drm sp5100_tco power_supply i2c_piix4 powernow_k8 mperf i2c_algo_bit amd64_edac_mod i2c_core k10temp edac_mce_amd edac_core pcspkr evdev shpchp processor button thermal_sys ext4 crc16 jbd2 mbcache dm_mod raid1 md_mod microcode usbhid hid sg sd_mod crc_t10dif ata_generic ohci_hcd pata_atiixp ahci libahci ehci_hcd li
bata tg3 libphy scsi_mod usbcore usb_common [last unloaded: e1000e]
[7438473.432138]
[7438473.432138] Pid: 27190, comm: smartctl Not tainted 3.2.0-4-amd64 #1 Debian 3.2.46-1 HP ProLiant MicroServer
[7438473.432138] RIP: 0010:[<ffffffff811a0379>] [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb
[7438473.432138] RSP: 0018:ffff88003f8a7c58 EFLAGS: 00010257
[7438473.432138] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[7438473.432138] RDX: 0000000000000000 RSI: 00007fff6034db38 RDI: ffff880036c3041c
[7438473.432138] RBP: ffff880072503800 R08: 00000000000282d0 R09: 0000000000000000
[7438473.432138] R10: 0000000000000202 R11: 0000000000000202 R12: 0000000000000024
[7438473.432138] R13: 00000000fffffff2 R14: 0000000000000012 R15: 00007fff6034db30
[7438473.432138] FS: 00007f6015e3e7c0(0000) GS:ffff880077c00000(0000) knlGS:0000000000000000
[7438473.432138] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7438473.432138] CR2: 0000000000000118 CR3: 000000005171d000 CR4: 00000000000006f0
[7438473.432138] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7438473.432138] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[7438473.432138] Process smartctl (pid: 27190, threadinfo ffff88003f8a6000, task ffff8800745ac970)
[7438473.432138] Stack:
[7438473.432138] 375b000000000004 0000000034383334 00007fff6034db38 ffff880036c30038
[7438473.432138] ffff8800725df800 0000005d00000024 ffff88003e8abd28 00000000fb777c0d
[7438473.432138] ffffffff810364e8 ffff880036c30038 00000000fffffffa 00007fff6034db30
[7438473.620376] Call Trace:
[7438473.620376] [<ffffffff810364e8>] ? should_resched+0x5/0x23
[7438473.620376] [<ffffffff8134833d>] ? printk+0x43/0x48
[7438473.620376] [<ffffffff811a0c55>] ? scsi_cmd_ioctl+0x353/0x3aa
[7438473.620376] [<ffffffff810d0c6b>] ? handle_pte_fault+0x298/0x79f
[7438473.620376] [<ffffffffa00193a2>] ? sd_ioctl+0xe8/0x119 [sd_mod]
[7438473.620376] [<ffffffff8119e4ef>] ? blkdev_ioctl+0x5e6/0x5fb
[7438473.620376] [<ffffffff811213a0>] ? block_ioctl+0x38/0x3c
[7438473.620376] [<ffffffff81121368>] ? bdgrab+0x12/0x12
[7438473.620376] [<ffffffff81107721>] ? do_vfs_ioctl+0x459/0x49a
[7438473.620376] [<ffffffff811b3d99>] ? __strncpy_from_user+0x18/0x48
[7438473.620376] [<ffffffff810ead50>] ? kmem_cache_free+0x2d/0x69
[7438473.620376] [<ffffffff811077ad>] ? sys_ioctl+0x4b/0x72
[7438473.620376] [<ffffffff81353b52>] ? system_call_fastpath+0x16/0x1b
[7438473.620376] Code: 24 0c 00 48 8b 7c 24 18 ba 10 00 00 00 41 bd f2 ff ff ff 40 0f 95 c6 e8 ce 8e ff ff 48 89 c3 4c 89 f0 48 8b 74 24 10 48 c1 e8 05 <48> 8b bb 18 01 00 00 83 e0 07 0f b6 88 70 79 42 81 66 89 8b 20
[7438473.620376] RIP [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb
[7438473.620376] RSP <ffff88003f8a7c58>
[7438473.620376] CR2: 0000000000000118
[7438473.785183] ---[ end trace 9ab17248b2604d45 ]---
[7438499.125626] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
[7438499.133085] ata4: irq_stat 0x00000040, connection status changed
[7438499.140570] ata4: SError: { CommWake 10B8B DevExch }
[7438499.147977] ata4: hard resetting link
[7438502.033991] IN=wl0 OUT= MAC= SRC=192.168.4.1 DST=192.168.4.255 LEN=263 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=243
[7438505.984237] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[7438506.073458] ata4.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
[7438506.081168] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[7438506.089962] ata4.00: configured for UDMA/133
[7438506.097552] ata4: EH complete
[7438506.105336] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZRX-00A 01.0 PQ: 0 ANSI: 5
[7438506.114956] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[7438506.122622] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[7438506.130379] sd 3:0:0:0: [sdc] Write Protect is off
[7438506.130423] sd 3:0:0:0: Attached scsi generic sg2 type 0
[7438506.145252] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[7438506.152765] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[7438506.191487] sdc: unknown partition table
[7438506.199651] sd 3:0:0:0: [sdc] Attached SCSI disk
** Model information
sys_vendor: HP
product_name: ProLiant MicroServer
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O41
** Loaded modules:
e1000e
ebtable_nat
ebtables
ipt_REDIRECT
ipt_MASQUERADE
xt_multiport
nf_conntrack_ipv6
nf_defrag_ipv6
xt_state
xt_tcpudp
xt_mac
ip6t_REJECT
ipt_REJECT
ip6t_LOG
ipt_LOG
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
sch_tbf
ppp_deflate
zlib_deflate
bsd_comp
parport_pc
ppdev
lp
parport
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
sit
tunnel4
ppp_async
crc_ccitt
ppp_generic
slhc
ext3
jbd
hwmon_vid
kvm_amd
kvm
radeon
snd_pcm
ttm
snd_page_alloc
snd_timer
drm_kms_helper
snd
soundcore
drm
sp5100_tco
power_supply
i2c_piix4
powernow_k8
mperf
i2c_algo_bit
amd64_edac_mod
i2c_core
k10temp
edac_mce_amd
edac_core
pcspkr
evdev
shpchp
processor
button
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
raid1
md_mod
microcode
usbhid
hid
sg
sd_mod
crc_t10dif
ata_generic
ohci_hcd
pata_atiixp
ahci
libahci
ehci_hcd
libata
tg3
libphy
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe5ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe5ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe5fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe5ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe5fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe5ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e800 [size=32]
Region 3: Memory at fe8dc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fe880000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10)
Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter [103c:705d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (100, 'proposed-updates'), (100, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.2 3.2.46-1
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: