Bug#721398: linux-image-3.2.0-4-amd64: Unable to reboot or poweroff. Kernel related issue.
Package: src:linux
Version: 3.2.46-1+deb7u1
Severity: normal
Dear Maintainer,
Issue:
I cannot poweroff or reboot the system via CLI or GUI. The software shutdown
process runs as intended but the system does not poweroff nor reboot.
This seems to be an issue with the 3-series kerrnel, as the 2.6-series from
Squeeze works as intended.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7bf153df-ebbd-4c29-8dfa-b0e0364891cb ro quiet splash
** Tainted: PWO (4609)
* Proprietary module has been loaded.
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[ 9.033549] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.033652] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.038944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.038954] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.038961] usb usb2: Product: OHCI Host Controller
[ 9.038966] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 9.038971] usb usb2: SerialNumber: 0000:00:02.0
[ 9.039740] hub 2-0:1.0: USB hub found
[ 9.039753] hub 2-0:1.0: 10 ports detected
[ 9.040261] cannot find the slot for index 0 (range 0-0), error: -16
[ 9.040282] snd_intel8x0: probe of 0000:00:04.0 failed with error -16
[ 9.412069] usb 2-3: new low-speed USB device number 2 using ohci_hcd
[ 9.626929] usb 2-3: New USB device found, idVendor=046d, idProduct=c01d
[ 9.626940] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.626947] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 9.626952] usb 2-3: Manufacturer: Logitech
[ 9.932079] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[ 10.161931] usb 2-4: New USB device found, idVendor=045e, idProduct=00dd
[ 10.161941] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.161948] usb 2-4: Product: Comfort Curve Keyboard 2000
[ 10.161953] usb 2-4: Manufacturer: Microsoft
[ 10.375612] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
[ 10.375894] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3/input0
[ 10.387630] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input5
[ 10.387889] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-4/input0
[ 10.405330] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input6
[ 10.405993] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-4/input1
[ 10.406050] usbcore: registered new interface driver usbhid
[ 10.406056] usbhid: USB HID core driver
[ 11.519393] Adding 2955260k swap on /dev/sdb6. Priority:-1 extents:1 across:2955260k
[ 370.379603] EXT3-fs (sdb5): using internal journal
[ 370.580603] loop: module loaded
[ 370.738224] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 370.738231] Disabling lock debugging due to kernel taint
[ 371.010711] [fglrx] Maximum main memory to use for locked dma buffers: 2876 MBytes.
[ 371.010867] [fglrx] vendor: 1002 device: 68d9 count: 1
[ 371.011226] [fglrx] ioport: bar 4, base 0x9000, size: 0x100
[ 371.011236] radeon 0000:01:00.0: setting latency timer to 64
[ 371.011497] [fglrx] Kernel PAT support is enabled
[ 371.011538] [fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
[ 634.925180] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 635.939518] skge 0000:05:0c.0: eth0: enabling interface
[ 636.090474] RPC: Registered named UNIX socket transport module.
[ 636.090482] RPC: Registered udp transport module.
[ 636.090487] RPC: Registered tcp transport module.
[ 636.090492] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 636.118408] FS-Cache: Loaded
[ 636.187481] FS-Cache: Netfs 'nfs' registered for caching
[ 636.215664] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 636.542477] fuse init (API version 7.17)
[ 637.746325] vboxdrv: Found 2 processor cores.
[ 637.747007] vboxdrv: fAsync=1 offMin=0xd8719 offMax=0xd8719
[ 637.747691] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 637.747698] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[ 637.993571] vboxpci: IOMMU not found (not registered)
[ 638.458086] skge 0000:05:0c.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 639.605880] Bluetooth: Core ver 2.16
[ 639.605930] NET: Registered protocol family 31
[ 639.605936] Bluetooth: HCI device and connection manager initialized
[ 639.605945] Bluetooth: HCI socket layer initialized
[ 639.605951] Bluetooth: L2CAP socket layer initialized
[ 639.606542] Bluetooth: SCO socket layer initialized
[ 639.638866] Bluetooth: RFCOMM TTY layer initialized
[ 639.638880] Bluetooth: RFCOMM socket layer initialized
[ 639.638885] Bluetooth: RFCOMM ver 1.11
[ 639.785258] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 639.785266] Bluetooth: BNEP filters: protocol multicast
[ 647.879208] ------------[ cut here ]------------
[ 647.879221] WARNING: at /build/linux-iWNI5S/linux-3.2.46/drivers/pci/msi.c:686 pci_enable_msi_block+0x8d/0x21d()
[ 647.879225] Hardware name: System Product Name
[ 647.879227] Modules linked in: cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats bnep rfcomm bluetooth rfkill pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext4 crc16 jbd2 fglrx(P) loop firewire_sbp2 joydev usbhid hid snd_mpu401 snd_mpu401_uart snd_seq_midi snd_seq_midi_event sg snd_intel8x0 ohci_hcd pata_amd sr_mod ehci_hcd snd_ac97_codec cdrom snd_rawmidi snd_hda_codec_hdmi snd_seq snd_hda_intel snd_hda_codec snd_hwdep skge snd_pcm edac_mce_amd snd_seq_device parport_pc snd_page_alloc snd_timer usbcore ac97_bus firewire_ohci i2c_nforce2 firewire_core edac_core ns558 snd parport gameport crc_itu_t usb_common k8temp soundcore pcspkr serio_raw powernow_k8 mperf evdev processor asus_atk0110 ext3 mbcache jbd radeon power_supply i2c_algo_bit ttm drm_kms_helper drm i2c_core sd_mod crc_t10dif ata_generic sata_nv libata fan thermal thermal_sys button scsi_mod
[ 647.879311] Pid: 5181, comm: Xorg Tainted: P O 3.2.0-4-amd64 #1 Debian 3.2.46-1+deb7u1
[ 647.879314] Call Trace:
[ 647.879324] [<ffffffff81046b75>] ? warn_slowpath_common+0x78/0x8c
[ 647.879328] [<ffffffff811d6183>] ? pci_enable_msi_block+0x8d/0x21d
[ 647.879463] [<ffffffffa0400a8f>] ? IRQMGR_initialize+0x24f/0x380 [fglrx]
[ 647.879510] [<ffffffffa04007e7>] ? IRQMGR_alloc_context+0xb7/0x110 [fglrx]
[ 647.879557] [<ffffffffa03ffb2e>] ? irqmgr_wrap_initialize+0x1e/0xb0 [fglrx]
[ 647.879603] [<ffffffffa03ff067>] ? firegl_interrupt_control+0x197/0x1d0 [fglrx]
[ 647.879609] [<ffffffff8104efad>] ? ns_capable+0x30/0x43
[ 647.879654] [<ffffffffa03feed0>] ? firegl_wait_for_hifreq_interrupt_PX+0x120/0x120 [fglrx]
[ 647.879696] [<ffffffffa03f016d>] ? firegl_ioctl+0x1ed/0x250 [fglrx]
[ 647.879734] [<ffffffffa03e2b3e>] ? ip_firegl_unlocked_ioctl+0x6/0xa [fglrx]
[ 647.879741] [<ffffffff81107721>] ? do_vfs_ioctl+0x459/0x49a
[ 647.879745] [<ffffffff811077ad>] ? sys_ioctl+0x4b/0x72
[ 647.879750] [<ffffffff810fa554>] ? sys_write+0x5f/0x6b
[ 647.879755] [<ffffffff81353b92>] ? system_call_fastpath+0x16/0x1b
[ 647.879758] ---[ end trace eab12eaf03c00c3d ]---
[ 647.879798] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 647.879809] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[ 647.881569] [fglrx] Firegl kernel thread PID: 5437
[ 647.881688] [fglrx] Firegl kernel thread PID: 5438
[ 647.881807] [fglrx] Firegl kernel thread PID: 5439
[ 647.881968] [fglrx] IRQ 47 Enabled
[ 650.301767] [fglrx] Gart USWC size:944 M.
[ 650.301773] [fglrx] Gart cacheable size:373 M.
[ 650.301780] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 650.301783] [fglrx] Reserved FB block: Unshared offset:fa0b000, size:2f5000
[ 650.301787] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 650.384030] eth0: no IPv6 routers present
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS A8N-SLI Premium ACPI BIOS Revision 1303
board_vendor: ASUSTeK Computer INC.
board_name: A8N-SLI Premium
board_version: 1.02
** Loaded modules:
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
bnep
rfcomm
bluetooth
rfkill
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext4
crc16
jbd2
fglrx(P)
loop
firewire_sbp2
joydev
usbhid
hid
snd_mpu401
snd_mpu401_uart
snd_seq_midi
snd_seq_midi_event
sg
snd_intel8x0
ohci_hcd
pata_amd
sr_mod
ehci_hcd
snd_ac97_codec
cdrom
snd_rawmidi
snd_hda_codec_hdmi
snd_seq
snd_hda_intel
snd_hda_codec
snd_hwdep
skge
snd_pcm
edac_mce_amd
snd_seq_device
parport_pc
snd_page_alloc
snd_timer
usbcore
ac97_bus
firewire_ohci
i2c_nforce2
firewire_core
edac_core
ns558
snd
parport
gameport
crc_itu_t
usb_common
k8temp
soundcore
pcspkr
serio_raw
powernow_k8
mperf
evdev
processor
asus_atk0110
ext3
mbcache
jbd
radeon
power_supply
i2c_algo_bit
ttm
drm_kms_helper
drm
i2c_core
sd_mod
crc_t10dif
ata_generic
sata_nv
libata
fan
thermal
thermal_sys
button
scsi_mod
** PCI devices:
00:00.0 Memory controller [0580]: NVIDIA Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation CK804 ISA Bridge [10de:0050] (rev f3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: NVIDIA Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at e000 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d4003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d4004000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Multimedia audio controller [0401]: NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=256]
Region 2: Memory at d4002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:06.0 IDE interface [0101]: NVIDIA Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at d4001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCI Bridge [10de:005c] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d2000000-d3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0b.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev f3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0000000-d1ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood PRO [Radeon HD 5500 Series] [1002:68d9] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:3051]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d1000000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 9000 [size=256]
Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
Subsystem: XFX Pine Group Inc. Device [1682:aa60]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at d1020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
05:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3008000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d3004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a000 [size=256]
Expansion ROM at d2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse
Bus 002 Device 003: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: