--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-powerpc: wireless card not working after kernel panic at at /build/buildd-linux-2.6_2.6.32-30-powerpc-wZZD8S/linux
- From: Jeroen Diederen <jjhdiederen@zonnet.nl>
- Date: Sun, 20 Feb 2011 16:47:51 +0100
- Message-id: <20110220154751.8534.40241.reportbug@debian>
Package: linux-2.6
Version: 2.6.32-30
Severity: important
Tags: squeeze
Sometimes the airport card working with airport/orinoco kernel module works
fine. Then I get a kernel panic:
[ 256.069813] ------------[ cut here ]------------
[ 256.069854] Badness at /build/buildd-linux-2.6_2.6.32-30-powerpc-
wZZD8S/linux
-2.6-2.6.32/debian/build/source_powerpc_none/net/wireless/core.c:614
[ 256.069876] NIP: e1e5a664 LR: e1e5a640 CTR: c03755ac
[ 256.069894] REGS: df85be80 TRAP: 0700 Not tainted (2.6.32-5-powerpc)
[ 256.069906] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 24000028 XER: 20000000
[ 256.069941] TASK = df849bc0[5] 'events/0' THREAD: df85a000
[ 256.069951] GPR00: c21cf800 df85bf30 df849bc0 00000000 00000000 00000000
0000
2b80 0000003b
[ 256.069982] GPR08: 00000000 00000001 df803300 d51ba880 24000022 00000000
0181
2550 018126bc
[ 256.070012] GPR16: 018124c4 c042301c c0423054 c045e098 00000001 c0508410
0000
0000 c05083a0
[ 256.070042] GPR24: df85bf58 df85a000 df803308 e1e5a60c df849bc0 c21cf00c
c21c
fb60 c21cf000
[ 256.070148] NIP [e1e5a664] wdev_cleanup_work+0x58/0xfc [cfg80211]
[ 256.070179] LR [e1e5a640] wdev_cleanup_work+0x34/0xfc [cfg80211]
[ 256.070190] Call Trace:
[ 256.070218] [df85bf30] [e1e5a640] wdev_cleanup_work+0x34/0xfc [cfg80211]
(unr
eliable)
[ 256.070254] [df85bf50] [c005dcdc] worker_thread+0x1b4/0x22c
[ 256.070279] [df85bfc0] [c0061aec] kthread+0x74/0x78
[ 256.070302] [df85bff0] [c0014adc] kernel_thread+0x4c/0x68
[ 256.070313] Instruction dump:
[ 256.070328] 3be9ff40 7fa3eb78 4801541d 817f0078 39200000 2f8b0000 419e0018
81
2b0018
[ 256.070373] 801e0010 7d290278 7d290034 5529d97e <0f090000> 2f890000 41be0018
38000001
If I rmmod orinoco and airport and modprobe them back again, the airport
wireless card works again as normal.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-powerpc (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Wed Jan 12 04:47:03 UTC 2011
** Command line:
root=/dev/hda5 ro
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 187.822703] aty128fb 0000:00:10.0: Invalid ROM contents
[ 190.256474] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[ 190.261235] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[ 193.558217] hda: host max PIO4 wanted PIO0 selected PIO0
[ 197.937232] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 198.132238] eth5: New link status: Connected (0001)
[ 198.132480] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 208.617342] eth5: no IPv6 routers present
[ 223.722383] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 223.953754] eth5: New link status: Connected (0001)
[ 223.954946] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 226.168846] ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 227.114497] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 227.346822] eth5: New link status: Connected (0001)
[ 227.347062] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 230.949048] eth5: Lucent/Agere firmware doesn't support manual roaming
[ 237.534585] eth5: no IPv6 routers present
[ 256.069813] ------------[ cut here ]------------
[ 256.069854] Badness at /build/buildd-linux-2.6_2.6.32-30-powerpc-wZZD8S/linux-2.6-2.6.32/debian/build/source_powerpc_none/net/wireless/core.c:614
[ 256.069876] NIP: e1e5a664 LR: e1e5a640 CTR: c03755ac
[ 256.069894] REGS: df85be80 TRAP: 0700 Not tainted (2.6.32-5-powerpc)
[ 256.069906] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 24000028 XER: 20000000
[ 256.069941] TASK = df849bc0[5] 'events/0' THREAD: df85a000
[ 256.069951] GPR00: c21cf800 df85bf30 df849bc0 00000000 00000000 00000000 00002b80 0000003b
[ 256.069982] GPR08: 00000000 00000001 df803300 d51ba880 24000022 00000000 01812550 018126bc
[ 256.070012] GPR16: 018124c4 c042301c c0423054 c045e098 00000001 c0508410 00000000 c05083a0
[ 256.070042] GPR24: df85bf58 df85a000 df803308 e1e5a60c df849bc0 c21cf00c c21cfb60 c21cf000
[ 256.070148] NIP [e1e5a664] wdev_cleanup_work+0x58/0xfc [cfg80211]
[ 256.070179] LR [e1e5a640] wdev_cleanup_work+0x34/0xfc [cfg80211]
[ 256.070190] Call Trace:
[ 256.070218] [df85bf30] [e1e5a640] wdev_cleanup_work+0x34/0xfc [cfg80211] (unreliable)
[ 256.070254] [df85bf50] [c005dcdc] worker_thread+0x1b4/0x22c
[ 256.070279] [df85bfc0] [c0061aec] kthread+0x74/0x78
[ 256.070302] [df85bff0] [c0014adc] kernel_thread+0x4c/0x68
[ 256.070313] Instruction dump:
[ 256.070328] 3be9ff40 7fa3eb78 4801541d 817f0078 39200000 2f8b0000 419e0018 812b0018
[ 256.070373] 801e0010 7d290278 7d290034 5529d97e <0f090000> 2f890000 41be0018 38000001
[ 267.211587] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 267.474760] eth5: New link status: Connected (0001)
[ 267.476423] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 278.404391] eth5: no IPv6 routers present
[ 336.659078] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 336.659192] pci 0001:11:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
[ 336.659275] pci 0001:11:00.0: supports D1 D2
[ 336.659288] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 336.659305] pci 0001:11:00.0: PME# disabled
[ 336.984172] b43-pci-bridge 0001:11:00.0: enabling device (0000 -> 0002)
[ 336.989299] ssb: Sonics Silicon Backplane found on PCI device 0001:11:00.0
[ 337.338274] b43-phy1: Broadcom 4306 WLAN found (core revision 5)
[ 337.514720] phy1: Selected rate control algorithm 'minstrel'
[ 337.519689] Registered led device: b43-phy1::tx
[ 337.519941] Registered led device: b43-phy1::rx
[ 337.520190] Registered led device: b43-phy1::radio
[ 337.524688] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 342.235349] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 342.337587] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 342.424824] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 342.472664] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 342.627265] b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 342.694721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 389.380397] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 389.392927] airport: Unknown parameter `orinoco'
[ 421.164959] airport 0.15 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 421.165109] airport: Physical address 80030000
[ 422.402040] airport 0.00030000:radio: Hardware identity 0001:0004:0005:0000
[ 422.402183] airport 0.00030000:radio: Station identity 001f:0001:0008:0048
[ 422.402202] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.72
[ 422.402358] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
[ 422.523580] airport 0.00030000:radio: Hardware identity 0001:0004:0005:0000
[ 422.523719] airport 0.00030000:radio: Station identity 001f:0002:0009:0030
[ 422.523738] airport 0.00030000:radio: Firmware determined as Lucent/Agere 9.48
[ 422.523752] airport 0.00030000:radio: Ad-hoc demo mode supported
[ 422.523765] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported
[ 422.523779] airport 0.00030000:radio: WEP supported, 104-bit key
[ 422.523791] airport 0.00030000:radio: WPA-PSK supported
[ 422.583727] udev[3371]: renamed network interface eth0 to eth5
[ 444.840197] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 445.029732] eth5: New link status: Connected (0001)
[ 445.030553] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 453.925981] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 454.155867] eth5: New link status: Connected (0001)
[ 454.156103] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 454.381979] ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 454.868522] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 455.223803] eth5: New link status: Connected (0001)
[ 455.224052] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[ 457.641525] eth5: Lucent/Agere firmware doesn't support manual roaming
[ 457.689012] eth5: Lucent/Agere firmware doesn't support manual roaming
[ 460.959738] eth5: New link status: Disconnected (0002)
[ 462.262088] eth5: New link status: Connected (0001)
[ 465.640695] eth5: no IPv6 routers present
[ 522.481722] hda: host max PIO4 wanted PIO0 selected PIO0
[ 3075.868666] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 3075.988657] b43-phy1 ERROR: DMA RX reset timed out
[ 3076.148673] b43-phy1 ERROR: DMA TX reset timed out
[ 3076.308664] b43-phy1 ERROR: DMA TX reset timed out
[ 3076.468645] b43-phy1 ERROR: DMA TX reset timed out
[ 3076.628665] b43-phy1 ERROR: DMA TX reset timed out
[ 3076.788670] b43-phy1 ERROR: DMA TX reset timed out
[ 3076.789353] ssb: Failed to switch to core 0
** Model information
revision : 131.2 (pvr 0008 8302)
platform : PowerMac
model : PowerBook3,1
machine : PowerBook3,1
motherboard : PowerBook3,1 MacRISC2 MacRISC Power Macintosh
** Loaded modules:
Module Size Used by
airport 6597 0
orinoco 61223 1 airport
arc4 4442 0
ecb 5353 0
b43 168237 0
rng_core 6446 1 b43
mac80211 156280 1 b43
ssb 49059 1 b43
mmc_core 54692 2 b43,ssb
uinput 10355 2
cpufreq_stats 5840 0
cpufreq_powersave 4138 0
cpufreq_userspace 5156 0
cpufreq_ondemand 10789 0
cpufreq_conservative 8952 0
parport_pc 28780 0
lp 10975 0
parport 32295 2 parport_pc,lp
sco 11560 2
bridge 48915 0
stp 4885 1 bridge
bnep 13750 2
rfcomm 37794 4
l2cap 32868 4 bnep,rfcomm
crc16 4475 1 l2cap
bluetooth 52362 6 sco,bnep,rfcomm,l2cap
nfsd 243748 11
lockd 65427 1 nfsd
nfs_acl 5635 1 nfsd
auth_rpcgss 36696 1 nfsd
sunrpc 173747 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 6642 1 nfsd
binfmt_misc 10371 1
fuse 57976 1
pmu_battery 4706 0
power_supply 10795 1 pmu_battery
snd_powermac 57815 1
snd_pcm 65033 1 snd_powermac
snd_seq 51409 0
snd_timer 20956 2 snd_pcm,snd_seq
snd_seq_device 8405 1 snd_seq
snd 52651 7 snd_powermac,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 8003 1 snd
snd_page_alloc 9045 1 snd_pcm
firewire_sbp2 16011 0
scsi_mod 126886 1 firewire_sbp2
loop 15945 0
michael_mic 5246 4
pcmcia 25655 2 b43,ssb
yenta_socket 24451 1
rsrc_nonstatic 11376 1 yenta_socket
cfg80211 117489 3 orinoco,b43,mac80211
rfkill 17994 4 bluetooth,cfg80211
i2c_powermac 6651 0
evdev 11760 28
pcmcia_core 30647 5 b43,ssb,pcmcia,yenta_socket,rsrc_nonstatic
ext3 124692 1
jbd 40847 1 ext3
mbcache 8286 1 ext3
ohci_hcd 35272 0
firewire_ohci 26160 0
ehci_hcd 42846 0
sungem 30865 0
ide_cd_mod 28561 0
firewire_core 44226 2 firewire_sbp2,firewire_ohci
cdrom 36699 1 ide_cd_mod
sungem_phy 12982 1 sungem
crc_itu_t 4495 1 firewire_core
usbcore 131955 3 ohci_hcd,ehci_hcd
nls_base 8693 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth4
iface eth4 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth4: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:30:65:b5:57:ba brd ff:ff:ff:ff:ff:ff
inet 169.254.9.24/16 brd 169.254.255.255 scope link eth4:avahi
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether ca:bc:5a:44:82:dc brd ff:ff:ff:ff:ff:ff
6: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:30:65:1c:70:65 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.6/24 brd 10.0.0.255 scope global eth5
inet6 fe80::230:65ff:fe1c:7065/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 14090 155 0 0 0 0 0 0 14090 155 0 0 0 0 0 0
eth4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth5: 1527705 1900 0 0 0 0 0 0 419904 1935 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2170 total packets received
60 with invalid addresses
0 forwarded
0 incoming packets discarded
2110 incoming packets delivered
2156 requests sent out
68 dropped because of missing route
Icmp:
41 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 41
41 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 41
IcmpMsg:
InType3: 41
OutType3: 41
Tcp:
68 active connections openings
0 passive connection openings
1 failed connection attempts
11 connection resets received
4 connections established
1432 segments received
1433 segments send out
0 segments retransmited
0 bad segments received.
16 resets sent
Udp:
780 packets received
0 packets to unknown port received.
0 packet receive errors
684 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
66 delayed acks sent
35 packets directly queued to recvmsg prequeue.
12581 bytes directly received in process context from prequeue
875 packet headers predicted
8 packets header predicted and directly queued to user
182 acknowledgments not containing data payload received
1 connections reset due to unexpected data
11 connections reset due to early user close
IpExt:
InBcastPkts: 141
OutBcastPkts: 138
InOctets: 1562972
OutOctets: 316675
InBcastOctets: 19690
OutBcastOctets: 18961
*** Device features:
eth4: 0x1009
eth5: 0x2000
lo: 0x13865
pan0: 0xff3865
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth AGP [106b:0020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at b0020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: aty128fb
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth PCI [106b:001f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:17.0 Unassigned class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:1a.0 CardBus bridge [0607]: Texas Instruments PCI1211 [104c:ac1e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth Internal PCI [106b:001e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth FireWire [106b:0018] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: firewire_ohci
0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.32-5-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-powerpc depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-powerpc recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-powerpc suggests:
pn linux-doc-2.6.32 <none> (no description available)
pn mkvmlinuz <none> (no description available)
Versions of packages linux-image-2.6.32-5-powerpc is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-powerpc/prerm/removing-running-kernel-2.6.32-5-powerpc: true
linux-image-2.6.32-5-powerpc/postinst/ignoring-do-bootloader-2.6.32-5-powerpc:
linux-image-2.6.32-5-powerpc/postinst/missing-firmware-2.6.32-5-powerpc:
linux-image-2.6.32-5-powerpc/postinst/depmod-error-initrd-2.6.32-5-powerpc: false
--- End Message ---
--- Begin Message ---
- To: 614236-done@bugs.debian.org
- Cc: Jeroen Diederen <jjhdiederen@zonnet.nl>
- Subject: Re: linux-image-2.6.32-5-powerpc: wireless card not working after kernel panic at at /build/buildd-linux-2.6_2.6.32-30-powerpc-wZZD8S/linux
- From: Moritz Muehlenhoff <jmm@inutil.org>
- Date: Tue, 20 Aug 2013 19:04:00 +0200
- Message-id: <20130820170400.GE19993@inutil.org>
- In-reply-to: <20120210001615.GA5127@burratino>
- References: <20110220154751.8534.40241.reportbug@debian> <20120210001615.GA5127@burratino>
On Thu, Feb 09, 2012 at 06:16:15PM -0600, Jonathan Nieder wrote:
> # letting version tracking do its work
> tags 614236 - squeeze
> quit
>
> Hi,
>
> Jeroen Diederen wrote:
>
> > Sometimes the airport card working with airport/orinoco kernel module works
> > fine. Then I get a kernel panic:
> [...]
> > ------------[ cut here ]------------
> > Badness at [...]/net/wireless/core.c:614
>
> This is
>
> | $ git show v2.6.32:net/wireless/core.c |sed -n '614 p'
> | if (WARN_ON(rdev->scan_req && rdev->scan_req->dev == wdev->netdev)) {
>
> Is it reproducible? If so, does it happen in 3.x.y kernels, too? (The
> only packages you should need from outside squeeze in order to test are
> the kernel image itself, linux-base, and initramfs-tools.)
>
> [...]
> > If I rmmod orinoco and airport and modprobe them back again, the airport
> > wireless card works again as normal.
>
> That's good to hear.
>
> Thanks, and sorry for the slow reply.
No further feedback, closing the bug.
Cheers,
Moritz
--- End Message ---