Bug#719847: linux-image-3.10-2-amd64: hang and timout populating /dev no console after boot
Package: src:linux
Version: 3.10.5-1
Severity: important
Dear Maintainer,
System fails to boot cleanly. It hangs while populating /dev and then kicks out a bunch of modprobe hung errors. It eventually comes up sorta. but I have no console or keyboard. I can ssh into the system and that is how I'm generating this report. This is an update/upgrade from wheezy. I had the same problem with the linux-image-3.9-1-amd64kernel, but had other priorities and didn't have time to work on it then. The linux-image-3.2.0-4-amd64 kernel worked fine and still will load and run fine using the jessie libs etc. I'll try building a custom kernel and see what that leads to.
pete
-- Package-specific info:
** Version:
Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=3e23aeb5-68a5-49d1-a5db-ab53b5b3157b ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 480.432548] [<ffffffff8111212a>] ? __inode_permission+0x57/0x95
[ 480.432551] [<ffffffff811148cc>] ? path_openat+0xc2/0x327
[ 480.432555] [<ffffffff81114dd4>] ? do_filp_open+0x2a/0x6e
[ 480.432560] [<ffffffff810fa39f>] ? kmem_cache_alloc+0x8c/0xfd
[ 480.432564] [<ffffffff8111dc59>] ? __alloc_fd+0xcc/0xdb
[ 480.432568] [<ffffffff81108a24>] ? do_sys_open+0x5c/0xe0
[ 480.432572] [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[ 600.432038] INFO: task modprobe:516 blocked for more than 120 seconds.
[ 600.432044] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.432046] modprobe D ffff8802bfd94040 0 516 431 0x00000004
[ 600.432052] ffff8802b1070080 0000000000000086 ffff8802b45920c0 0000000000014040
[ 600.432056] ffff8802b1061fd8 ffff8802b1061fd8 ffff8802b1070080 ffff8802b0d9c400
[ 600.432060] 0000000000000000 0000000000000000 ffff8802b0d9c790 0000000000000000
[ 600.432064] Call Trace:
[ 600.432083] [<ffffffffa01da2c7>] ? i801_transaction+0xa4/0xe9 [i2c_i801]
[ 600.432090] [<ffffffff81057c48>] ? abort_exclusive_wait+0x79/0x79
[ 600.432094] [<ffffffffa01dae08>] ? i801_access+0x7a6/0x888 [i2c_i801]
[ 600.432100] [<ffffffff8113aeeb>] ? ep_poll_callback+0xe8/0x101
[ 600.432104] [<ffffffff8105d056>] ? __wake_up_common+0x3f/0x71
[ 600.432113] [<ffffffffa01cecb0>] ? i2c_smbus_xfer+0xc3/0x11d [i2c_core]
[ 600.432118] [<ffffffffa01d0069>] ? i2c_do_del_adapter+0x8/0x8f [i2c_core]
[ 600.432124] [<ffffffffa01cfdaf>] ? i2c_default_probe+0x93/0xf5 [i2c_core]
[ 600.432129] [<ffffffffa01d0069>] ? i2c_do_del_adapter+0x8/0x8f [i2c_core]
[ 600.432135] [<ffffffffa01cfebe>] ? i2c_do_add_adapter+0xad/0x22b [i2c_core]
[ 600.432140] [<ffffffff811c3bf2>] ? kobject_uevent_env+0x3de/0x420
[ 600.432146] [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[ 600.432151] [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[ 600.432156] [<ffffffff8127699f>] ? bus_for_each_dev+0x4b/0x7c
[ 600.432161] [<ffffffffa01d003c>] ? i2c_do_add_adapter+0x22b/0x22b [i2c_core]
[ 600.432167] [<ffffffffa01ce37c>] ? i2c_for_each_dev+0x29/0x3f [i2c_core]
[ 600.432172] [<ffffffffa01cf260>] ? i2c_register_driver+0x7a/0x9f [i2c_core]
[ 600.432182] [<ffffffffa010d000>] ? 0xffffffffa010cfff
[ 600.432186] [<ffffffffa010d000>] ? 0xffffffffa010cfff
[ 600.432190] [<ffffffff8100209e>] ? do_one_initcall+0x74/0x106
[ 600.432195] [<ffffffffa010d000>] ? 0xffffffffa010cfff
[ 600.432200] [<ffffffff81082b8b>] ? load_module+0x1b16/0x1e16
[ 600.432204] [<ffffffff8107f78e>] ? free_notes_attrs+0x3c/0x3c
[ 600.432209] [<ffffffff81082f29>] ? SyS_init_module+0x9e/0xab
[ 600.432214] [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[ 600.432220] INFO: task modprobe:601 blocked for more than 120 seconds.
[ 600.432222] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.432224] modprobe D ffff8802bfc94040 0 601 412 0x00000006
[ 600.432228] ffff8802b3dbe040 0000000000000082 ffff8802b44b4780 0000000000014040
[ 600.432231] ffff8802b2ec5fd8 ffff8802b2ec5fd8 ffff8802b3dbe040 ffffffffa01d20e0
[ 600.432235] ffff8802b3dbe040 ffffffffa01d20e4 0000000000000002 0000000000000000
[ 600.432239] Call Trace:
[ 600.432246] [<ffffffff81387996>] ? schedule_preempt_disabled+0x5/0x6
[ 600.432250] [<ffffffff81386a60>] ? __mutex_lock_common.isra.8+0x1a3/0x1bf
[ 600.432257] [<ffffffffa01cfa50>] ? i2c_register_adapter+0x285/0x285 [i2c_core]
[ 600.432260] [<ffffffff81386834>] ? mutex_lock+0x17/0x27
[ 600.432266] [<ffffffffa01cfa61>] ? i2c_add_adapter+0x11/0x59 [i2c_core]
[ 600.432271] [<ffffffffa01e06aa>] ? __i2c_bit_add_bus+0x33/0x284 [i2c_algo_bit]
[ 600.432311] [<ffffffffa035f26f>] ? radeon_i2c_create+0x1b8/0x1ea [radeon]
[ 600.432338] [<ffffffffa034930a>] ? radeon_combios_i2c_init+0x5b/0x227 [radeon]
[ 600.432368] [<ffffffffa035cfe0>] ? radeon_modeset_init+0x8da/0x916 [radeon]
[ 600.432392] [<ffffffffa0340965>] ? radeon_debugfs_add_files+0xc2/0xc9 [radeon]
[ 600.432417] [<ffffffffa0341754>] ? radeon_driver_load_kms+0xb1/0xf5 [radeon]
[ 600.432429] [<ffffffffa02ecee2>] ? drm_get_pci_dev+0x152/0x259 [drm]
[ 600.432451] [<ffffffffa033f0f0>] ? radeon_pci_probe+0xd4/0xf6 [radeon]
[ 600.432475] [<ffffffffa033f102>] ? radeon_pci_probe+0xe6/0xf6 [radeon]
[ 600.432480] [<ffffffff811e049d>] ? local_pci_probe+0x33/0x58
[ 600.432484] [<ffffffff812781a9>] ? driver_probe_device+0x1b3/0x1b3
[ 600.432488] [<ffffffff811e057c>] ? pci_device_probe+0xba/0xde
[ 600.432492] [<ffffffff81278088>] ? driver_probe_device+0x92/0x1b3
[ 600.432496] [<ffffffff812781fc>] ? __driver_attach+0x53/0x73
[ 600.432499] [<ffffffff8127699f>] ? bus_for_each_dev+0x4b/0x7c
[ 600.432503] [<ffffffff812778c1>] ? bus_add_driver+0xd5/0x1f4
[ 600.432507] [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[ 600.432511] [<ffffffff81278722>] ? driver_register+0x87/0xfe
[ 600.432515] [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[ 600.432519] [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[ 600.432522] [<ffffffff8100209e>] ? do_one_initcall+0x74/0x106
[ 600.432526] [<ffffffffa03e9000>] ? 0xffffffffa03e8fff
[ 600.432530] [<ffffffff81082b8b>] ? load_module+0x1b16/0x1e16
[ 600.432533] [<ffffffff8107f78e>] ? free_notes_attrs+0x3c/0x3c
[ 600.432538] [<ffffffff81082f29>] ? SyS_init_module+0x9e/0xab
[ 600.432542] [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
[ 600.432554] INFO: task Xorg:4126 blocked for more than 120 seconds.
[ 600.432555] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.432557] Xorg D ffff8802bfd94040 0 4126 4055 0x00400000
[ 600.432561] ffff8802b3108880 0000000000000086 ffff8802b44b67c0 0000000000014040
[ 600.432565] ffff8802b38a3fd8 ffff8802b38a3fd8 ffff8802b3108880 ffffffffa030f000
[ 600.432568] ffff8802b3108880 ffffffffa030f004 0000000000000002 0000000000000000
[ 600.432572] Call Trace:
[ 600.432577] [<ffffffff81387996>] ? schedule_preempt_disabled+0x5/0x6
[ 600.432581] [<ffffffff81386a60>] ? __mutex_lock_common.isra.8+0x1a3/0x1bf
[ 600.432585] [<ffffffff81386834>] ? mutex_lock+0x17/0x27
[ 600.432593] [<ffffffffa02e76e1>] ? drm_stub_open+0x42/0x122 [drm]
[ 600.432597] [<ffffffff8110ccf7>] ? chrdev_open+0x11c/0x140
[ 600.432600] [<ffffffff8110cbdb>] ? cdev_put+0x19/0x19
[ 600.432605] [<ffffffff811080e6>] ? do_dentry_open+0x16d/0x20f
[ 600.432608] [<ffffffff811081b2>] ? finish_open+0x2a/0x33
[ 600.432612] [<ffffffff81114662>] ? do_last+0x864/0xa0c
[ 600.432616] [<ffffffff8111212a>] ? __inode_permission+0x57/0x95
[ 600.432619] [<ffffffff811148cc>] ? path_openat+0xc2/0x327
[ 600.432623] [<ffffffff81114dd4>] ? do_filp_open+0x2a/0x6e
[ 600.432628] [<ffffffff810fa39f>] ? kmem_cache_alloc+0x8c/0xfd
[ 600.432632] [<ffffffff8111dc59>] ? __alloc_fd+0xcc/0xdb
[ 600.432635] [<ffffffff81108a24>] ? do_sys_open+0x5c/0xe0
[ 600.432639] [<ffffffff8138d4a9>] ? system_call_fastpath+0x16/0x1b
** Model information
sys_vendor: IBM
product_name: IBM System x3650 -[7979AC1]-
product_version:
chassis_vendor: IBM
chassis_version:
bios_vendor: IBM
bios_version: -[GGE138AUS-1.10]-
board_vendor: IBM
board_name: System Planar
board_version:
** Loaded modules:
bnep
rfcomm
bluetooth
rfkill
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
radeon
ttm
drm_kms_helper
i5000_edac
iTCO_wdt
iTCO_vendor_support
drm
lpc_ich
coretemp
edac_core
kvm_intel
mfd_core
i5k_amb
ics932s401
acpi_cpufreq
kvm
joydev
i2c_algo_bit
mperf
i2c_i801
psmouse
evdev
processor
ioatdma
pcspkr
serio_raw
i2c_core
shpchp
thermal_sys
rng_core
microcode
dca
button
ext4
crc16
jbd2
mbcache
sg
ses
enclosure
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
hid_generic
usbhid
hid
aacraid
ata_piix
bnx2
ehci_pci
uhci_hcd
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth2
iface eth2 inet static
address 192.168.10.242
netmask 255.255.255.0
network 192.168.10.0
broadcast 192.168.10.255
gateway 192.168.10.113
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.10.150 192.168.10.113
dns-search
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1a:64:c5:eb:c4 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.242/24 brd 192.168.10.255 scope global eth2
valid_lft forever preferred_lft forever
inet6 fe80::21a:64ff:fec5:ebc4/64 scope link
valid_lft forever preferred_lft forever
3: eth5: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:1a:64:c5:eb:c6 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth2: 883461 4700 0 0 0 0 0 2 826002 4733 0 0 0 0 0 0
eth5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 960 16 0 0 0 0 0 0 960 16 0 0 0 0 0 0
*** Protocol statistics:
Ip:
4735 total packets received
0 forwarded
0 incoming packets discarded
4735 incoming packets delivered
4704 requests sent out
Icmp:
6 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 6
6 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 6
IcmpMsg:
InType8: 6
OutType0: 6
Tcp:
16 active connections openings
2 passive connection openings
8 failed connection attempts
0 connection resets received
2 connections established
4646 segments received
4633 segments send out
0 segments retransmited
0 bad segments received.
8 resets sent
Udp:
135 packets received
0 packets to unknown port received.
0 packet receive errors
72 packets sent
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
14 delayed acks sent
352 packet headers predicted
60 acknowledgments not containing data payload received
2572 predicted acknowledgments
TCPOFOQueue: 1
IpExt:
InMcastPkts: 14
OutMcastPkts: 14
InBcastPkts: 46
OutBcastPkts: 38
InOctets: 805680
OutOctets: 736911
InMcastOctets: 3131
OutMcastOctets: 3003
InBcastOctets: 6674
OutBcastOctets: 4782
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev b1)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1a, subordinate=25, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c8000000-c9ffffff
Prefetchable memory behind bridge: 00000000c7f00000-00000000c7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00006000-0000ffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=45, subordinate=45, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=44, subordinate=44, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev b1)
Subsystem: IBM Device [1014:02dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: IBM Device [1014:02dd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev b1)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev b1)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev b1)
Subsystem: IBM Device [1014:02dd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev b1)
Subsystem: IBM Device [1014:02dd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Memory behind bridge: cd000000-cfffffff
Prefetchable memory behind bridge: 0000000f40200000-0000000f403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: ca000000-ccffffff
Prefetchable memory behind bridge: 0000000f40000000-0000000f401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 2200 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 2600 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at 2a00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 2e00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: IBM Device [1014:02dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000ddffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller [8086:2680] (rev 09) (prog-if 80 [Master])
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 0480 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09)
Subsystem: IBM Device [1014:02dd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 0440 [size=32]
Kernel driver in use: i801_smbus
01:06.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: IBM Device [1014:0305]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: cd000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: IBM Device [1014:0342]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at ce000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
04:00.0 RAID bus controller [0104]: Adaptec AAC-RAID (Rocket) [9005:0286] (rev 02)
Subsystem: IBM ServeRAID 8k/8k-l8 [1014:9580]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c9e00000 (64-bit, non-prefetchable) [size=2M]
Region 2: Memory at c7fe0000 (64-bit, prefetchable) [size=128K]
Region 4: I/O ports at 5000 [size=256]
[virtual] Expansion ROM at c7f00000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: aacraid
05:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: ca000000-ccffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: IBM Device [1014:0342]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at ca000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
1a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=1a, secondary=1b, subordinate=24, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
1a:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=1a, secondary=25, subordinate=25, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
1b:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=1b, secondary=1c, subordinate=1c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
1b:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=1b, secondary=24, subordinate=24, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04b3:4001 IBM Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 1c4f:0003 SiGma Micro HID controller
Bus 001 Device 002: ID 0e8f:0022 GreenAsia Inc.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-2-amd64 is related to:
pn firmware-atheros <none>
ii firmware-bnx2 0.39
ii firmware-bnx2x 0.39
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-2-amd64/prerm/removing-running-kernel-3.10-2-amd64: true
linux-image-3.10-2-amd64/postinst/missing-firmware-3.10-2-amd64:
linux-image-3.10-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-2-amd64/postinst/depmod-error-initrd-3.10-2-amd64: false
Reply to: