Bug#625211: linux-image-2.6.32-5-amd64: Can no longer control backlight
Package: src:linux
Version: 3.9.8-1
Followup-For: Bug #625211
No, with the radeon driver it works, sorry for not having checked that.
There is already a bug open against fglrx-driver, as brightness is concerned:
719536.
The problem remains that one need to specify the kernel attribute in the grub
configuration file, it would be nice if that could be handled during
installation.
Thanks, Carlo.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=221d4a92-44de-42bf-a8c4-1d8844595fbf ro acpi_backlight=vendor acpi_backlight=vendor
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.657439] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x14, 0x0c.
[ 5.734873] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.734962] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.735378] hub 1-1:1.0: USB hub found
[ 5.735599] hub 1-1:1.0: 6 ports detected
[ 5.775436] lib80211_crypt: registered algorithm 'TKIP'
[ 5.775681] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 5.787049] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 5.846414] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 5.850581] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 5.978830] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3657 MBytes.
[ 5.978930] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.979001] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.979162] <6>[fglrx] vendor: 1002 device: 68e0 count: 1
[ 5.979547] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 5.979841] <6>[fglrx] Kernel PAT support is enabled
[ 5.979934] <6>[fglrx] module loaded - fglrx 13.20.4 [Jul 26 2013] with 1 minors
[ 5.980444] hub 2-1:1.0: USB hub found
[ 5.980603] hub 2-1:1.0: 8 ports detected
[ 6.017221] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.017393] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.017808] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.017924] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 6.043568] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 6.050490] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 6.165448] usb 1-1.1: New USB device found, idVendor=1210, idProduct=25f4
[ 6.165533] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.165618] usb 1-1.1: Product: USB 2.0 PC Camera
[ 6.165688] usb 1-1.1: Manufacturer: Alcor Micro, Corp.
[ 6.250758] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 6.347591] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219c
[ 6.347677] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.347762] usb 2-1.3: Product: Broadcom BCM2070 Bluetooth Device
[ 6.347832] usb 2-1.3: Manufacturer: Broadcom Corp
[ 6.347902] usb 2-1.3: SerialNumber: 001BB1F9E0EB
[ 6.418548] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 6.512591] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6335
[ 6.512676] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.512761] usb 2-1.4: Product: Mass Storage Device
[ 6.512824] usb 2-1.4: Manufacturer: Generic
[ 6.512886] usb 2-1.4: SerialNumber: 058F63356336
[ 6.816996] Bluetooth: Core ver 2.16
[ 6.817110] NET: Registered protocol family 31
[ 6.817190] Bluetooth: HCI device and connection manager initialized
[ 6.817278] Bluetooth: HCI socket layer initialized
[ 6.817360] Bluetooth: L2CAP socket layer initialized
[ 6.817435] Bluetooth: SCO socket layer initialized
[ 6.861435] usbcore: registered new interface driver btusb
[ 6.891589] cfg80211: World regulatory domain updated:
[ 6.891653] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.891727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.891802] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.891889] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.891963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.892050] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.781854] media: Linux media interface: v0.10
[ 7.797364] Initializing USB Mass Storage driver...
[ 7.797628] scsi5 : usb-storage 2-1.4:1.0
[ 7.797845] usbcore: registered new interface driver usb-storage
[ 7.797918] USB Mass Storage support registered.
[ 7.803907] Linux video capture interface: v2.00
[ 7.826159] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[ 7.830062] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[ 7.830331] usbcore: registered new interface driver uvcvideo
[ 7.830410] USB Video Class driver (1.1.1)
[ 8.711137] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.795961] scsi 5:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 8.796542] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 9.012386] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.103974] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 9.941550] fuse init (API version 7.21)
[ 9.970367] loop: module loaded
[ 10.272553] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 11.339964] RPC: Registered named UNIX socket transport module.
[ 11.340064] RPC: Registered udp transport module.
[ 11.340149] RPC: Registered tcp transport module.
[ 11.340236] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.379679] FS-Cache: Loaded
[ 11.386662] Key type dns_resolver registered
[ 11.414930] FS-Cache: Netfs 'nfs' registered for caching
[ 11.461785] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.565192] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 15.513620] Bluetooth: RFCOMM TTY layer initialized
[ 15.513734] Bluetooth: RFCOMM socket layer initialized
[ 15.513815] Bluetooth: RFCOMM ver 1.11
[ 15.578216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.578308] Bluetooth: BNEP filters: protocol multicast
[ 15.578392] Bluetooth: BNEP socket layer initialized
[ 15.920223] lp: driver loaded but no devices found
[ 16.119846] ppdev: user-space parallel port driver
[ 179.932597] cfg80211: Calling CRDA to update world regulatory domain
[ 179.942732] cfg80211: World regulatory domain updated:
[ 179.942737] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 179.942739] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 179.942741] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 179.942743] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 179.942745] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 179.942748] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 305.696158] WebKitWebProces[5030]: segfault at 28 ip 00007fe7ea1697be sp 00007fff2d483710 error 4 in fglrx-libGL.so.1.2[7fe7ea130000+9a000]
[ 368.524031] WebKitWebProces[5526]: segfault at 28 ip 00007fdc8f3fb7be sp 00007fff45c90660 error 4 in fglrx-libGL.so.1.2[7fdc8f3c2000+9a000]
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: R540/R580/R780/SA41/E452/E852
product_version: 03KP
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 03KP.M008.20100927.LDG
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: R540/R580/R780/SA41/E452/E852
board_version: 03KP
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
usb_storage
media
btusb
bluetooth
snd_hda_codec_hdmi
snd_hda_codec_realtek
joydev
fglrx(PO)
snd_hda_intel
coretemp
snd_hda_codec
lib80211_crypt_tkip
kvm_intel
kvm
snd_hwdep
snd_pcm
wl(PO)
snd_page_alloc
snd_seq
iTCO_wdt
iTCO_vendor_support
sg
ehci_pci
lpc_ich
i2c_i801
sr_mod
crc32c_intel
ehci_hcd
mfd_core
i2c_core
cdrom
samsung_laptop
intel_ips
snd_seq_device
usbcore
lib80211
cfg80211
acpi_cpufreq
mperf
sky2
processor
snd_timer
psmouse
snd
usb_common
microcode
rfkill
soundcore
pcspkr
serio_raw
evdev
video
battery
button
ac
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
thermal
fan
thermal_sys
ahci
libahci
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0000000-f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f4c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f3800000-f4bfffff
Prefetchable memory behind bridge: 00000000f4d00000-00000000f4efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00007000-0000afff
Memory behind bridge: f0200000-f23fffff
Prefetchable memory behind bridge: 00000000f4f00000-00000000f50fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f2400000-f37fffff
Prefetchable memory behind bridge: 00000000f5100000-00000000f52fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at e070 [size=8]
Region 1: I/O ports at e060 [size=4]
Region 2: I/O ports at e050 [size=8]
Region 3: I/O ports at e040 [size=4]
Region 4: I/O ports at e020 [size=32]
Region 5: Memory at f4c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e000 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4c04000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at f0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Wistron NeWeb Corp. Device [185f:051a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f3800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 004: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.39
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: