--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-3-amd64: some multimedia/action keys don't work
- From: Stefan Nagy <public@stefan-nagy.at>
- Date: Fri, 03 Aug 2012 23:16:29 +0200
- Message-id: <20120803211629.3293.49738.reportbug@rosa>
Package: src
Version: 3.2.21-3
Severity: normal
Dear Maintainer,
some multimedia/action keys of my notebook don't work. Neither xev nor showkey,
evtest or xinput report anything at all when I press (Fn together with) certain
keys.
Affected are the following combinations: Fn+F2 (display brightness down), Fn+F3
(display brightness up), Fn+F12 (wireless on/off).
Other action keys work well out of the box like Fn+F6 (last music title), Fn+F7
(play/pause), Fn+F8 (next music title)…
I'm reporting this against linux-image-3.2.0-3-amd64 because I found a similar
report against evdev (bug #619466), in Message #10 Cyril Brulebois wrote:
"Try with evtest $device on a console, if there's nothing coming up, talk to
kernel
people."
Please tell me if you need more information.
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/rosa-root ro quiet
pci=noacpi
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 9.856776] rts_pstor: waiting for device to settle before scanning
[ 10.188137] ACPI: Battery Slot [BAT1] (battery present)
[ 10.195507] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 10.195753] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 10.195971] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.200688] Linux video capture interface: v2.00
[ 10.200810] cfg80211: Calling CRDA to update world regulatory domain
[ 10.279720] uvcvideo: Found UVC 1.00 device HP TrueVision HD (1bcf:2c07)
[ 10.298792] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 10.298796] Copyright(c) 2003-2011 Intel Corporation
[ 10.298943] iwlwifi 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 10.298983] iwlwifi 0000:02:00.0: setting latency timer to 64
[ 10.299031] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 10.299035] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90011090000
[ 10.299037] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
[ 10.299217] iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
[ 10.299311] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N
1030 BGN, REV=0xB0
[ 10.299469] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 10.315355] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 10.315359] iwlwifi 0000:02:00.0: Device SKU: 0X150
[ 10.315363] iwlwifi 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 10.315395] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a
channels
[ 10.332763] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 10.333293] Registered led device: phy0-led
[ 10.336932] fbcon: inteldrmfb (fb0) is primary device
[ 10.342565] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.355636] cfg80211: World regulatory domain updated:
[ 10.355639] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 10.355643] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 10.355646] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 10.355649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 10.355652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 10.355654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 10.361613] input: HP TrueVision HD as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[ 10.361754] usbcore: registered new interface driver uvcvideo
[ 10.361756] USB Video Class driver (1.1.1)
[ 10.538938] Console: switching to colour frame buffer device 170x48
[ 10.550081] fb0: inteldrmfb frame buffer device
[ 10.550087] drm: registered panic notifier
[ 10.550347] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 10.550464] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ
19
[ 10.550486] ACPI: resource 0000:00:1f.3 [io 0x4040-0x405f] conflicts with
ACPI region SMBI [io 0x4040-0x404f]
[ 10.550497] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 10.550641] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A ->
IRQ 22
[ 10.550812] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 10.550878] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.608483] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 10.855484] rts_pstor: device scan complete
[ 10.855811] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00
PQ: 0 ANSI: 0 CCS
[ 10.855967] Bad LUN (0:1)
[ 10.856277] Bad target number (1:0)
[ 10.856596] Bad target number (2:0)
[ 10.856916] Bad target number (3:0)
[ 10.857235] Bad target number (4:0)
[ 10.857555] Bad target number (5:0)
[ 10.857875] Bad target number (6:0)
[ 10.858148] Bad target number (7:0)
[ 10.859341] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.102434] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 11.124044] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.124344] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.124649] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.124842] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.922733] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd00123/0x840300/0x126c00
[ 12.050648] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 12.613423] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 12.681695] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 12.785381] loop: module loaded
[ 13.414477] Adding 4624380k swap on /dev/mapper/rosa-swap_1. Priority:-1
extents:1 across:4624380k SS
[ 14.264354] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 14.833359] RPC: Registered named UNIX socket transport module.
[ 14.833369] RPC: Registered udp transport module.
[ 14.833376] RPC: Registered tcp transport module.
[ 14.833381] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.845525] FS-Cache: Loaded
[ 14.857681] FS-Cache: Netfs 'nfs' registered for caching
[ 14.869648] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.197071] r8169 0000:01:00.0: eth0: unable to load firmware patch
rtl_nic/rtl8168e-3.fw (-2)
[ 16.208542] r8169 0000:01:00.0: eth0: link down
[ 16.208987] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.212631] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 16.219316] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 16.309508] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 16.316229] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 16.413661] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.197388] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.678464] wlan0: authenticate with f4:9f:54:57:d6:62 (try 1)
[ 17.679006] Bluetooth: RFCOMM TTY layer initialized
[ 17.679014] Bluetooth: RFCOMM socket layer initialized
[ 17.679017] Bluetooth: RFCOMM ver 1.11
[ 17.681298] wlan0: authenticated
[ 17.681591] wlan0: associate with f4:9f:54:57:d6:62 (try 1)
[ 17.684103] wlan0: RX AssocResp from f4:9f:54:57:d6:62 (capab=0x411 status=0
aid=2)
[ 17.684108] wlan0: associated
[ 17.684724] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.684728] Bluetooth: BNEP filters: protocol multicast
[ 17.690816] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.843365] lp: driver loaded but no devices found
[ 17.851484] ppdev: user-space parallel port driver
[ 27.999225] wlan0: no IPv6 routers present
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Folio 13 - 2000 Notebook PC
product_version: 0687100400204A00000330100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.13
board_vendor: Hewlett-Packard
board_name: 1899
board_version: 46.70
** Loaded modules:
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext2
loop
joydev
snd_hda_codec_hdmi
snd_hda_codec_idt
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
iwlwifi
snd_pcm
snd_page_alloc
snd_seq
mac80211
uvcvideo
snd_seq_device
snd_timer
cfg80211
videodev
psmouse
iTCO_wdt
v4l2_compat_ioctl32
hp_wmi
sparse_keymap
btusb
media
bluetooth
snd
coretemp
i2c_i801
pcspkr
iTCO_vendor_support
serio_raw
evdev
rfkill
battery
ac
power_supply
i915
drm_kms_helper
drm
soundcore
rts_pstor(C)
i2c_algo_bit
video
i2c_core
wmi
acpi_cpufreq
mperf
button
tpm_tis
tpm
tpm_bios
processor
ext4
crc16
jbd2
mbcache
sha256_generic
usbhid
hid
dm_crypt
dm_mod
sd_mod
crc_t10dif
crc32c_intel
ghash_clmulni_intel
ahci
libahci
sdhci_pci
aesni_intel
libata
sdhci
xhci_hcd
scsi_mod
aes_x86_64
aes_generic
cryptd
ehci_hcd
r8169
mii
mmc_core
thermal
fan
thermal_sys
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at c2704000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at c2700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c2600000-c26fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c1600000-c25fffff
Prefetchable memory behind bridge: 00000000c0500000-00000000c14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: c1500000-c15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c2708000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at c2707000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c2705000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030
[8086:008b] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5315]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI
Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card
Reader [10ec:5209]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c1601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts_pstor
03:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI
Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card
Reader [10ec:5209]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at c1600000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.0 USB controller [0c03]: Fresco Logic Device [1b73:1009] (rev 02) (prog-
if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at c1510000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at c1511000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1bcf:2c07 Sunplus Innovation Technology Inc.
Bus 001 Device 004: ID 8086:0189 Intel Corp.
Bus 004 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
--- End Message ---