Your message dated Tue, 13 Aug 2013 21:32:09 +0200 with message-id <1376422329.14079.120.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#713929: Fan working again with linux-image-3.10-2-amd64 has caused the Debian Bug report #713929, regarding linux-image-3.9-1-amd64: HP Compaq nc4400 fan not working to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 713929: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=713929 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.9-1-amd64: HP Compaq nc4400 fan not working
- From: jors <jors@enchufado.com>
- Date: Mon, 24 Jun 2013 00:38:26 +0200
- Message-id: <20130623223826.3372.15005.reportbug@plas>
Package: src:linux Version: 3.9.6-1 Severity: critical Justification: breaks the whole system Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? Update to this kernel version from previous linux-image-3.2.0-4-amd64. * What exactly did you do (or not do) that was effective (or ineffective)? Start with the updated kernel. * What was the outcome of this action? Fan never starts. * What outcome did you expect instead? Fan starts depending on the cpu temperature, as did with the previous kernel. *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=0e6aeaa9-31fb-4c6c-adf4-e9b5770cf256 ro quiet ** Not tainted ** Kernel log: [ 1.855166] ACPI: Battery Slot [C1B4] (battery present) [ 1.855297] ACPI: Battery Slot [C1B3] (battery absent) [ 1.855730] ACPI: AC Adapter [C1B2] (on-line) [ 1.857083] wmi: Mapper loaded [ 1.857724] hp_accel: laptop model unknown, using default axes configuration [ 1.872053] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 1.878658] cfg80211: Calling CRDA to update world regulatory domain [ 1.883976] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 1.884100] lis3lv02d: 12 bits sensor found [ 1.920449] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.932697] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 1.967307] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 1.967314] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 1.984332] intel_rng: FWH not detected [ 1.992088] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 2.002650] Error: Driver 'pcspkr' is already registered, aborting... [ 2.040279] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30b1] [ 2.040309] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 2.040317] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 2.040322] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 2.040331] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 [ 2.048088] usb 3-1: New USB device found, idVendor=046d, idProduct=c018 [ 2.048095] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.048100] usb 3-1: Product: USB Optical Mouse [ 2.048104] usb 3-1: Manufacturer: Logitech [ 2.094294] tpm_tis 00:01: Adjusting TPM timeout parameters. [ 2.095296] [drm] Memory usable by graphics device = 256M [ 2.095310] i915 0000:00:02.0: setting latency timer to 64 [ 2.114475] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.114480] [drm] Driver supports precise vblank timestamp query. [ 2.114614] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.129165] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 2.129173] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 2.129339] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X [ 2.192351] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 2.194473] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 2.214403] cfg80211: World regulatory domain updated: [ 2.214409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.214414] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.214418] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.214422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.214426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.214429] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.254985] hidraw: raw HID events driver (C) Jiri Kosina [ 2.260221] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8 [ 2.272844] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18 [ 2.272854] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 2.272861] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 2.272888] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 2.272894] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4200000-0xf45fffff] [ 2.272900] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4200000-0xf45fffff: [ 2.272907] excluding 0xf4200000-0xf423ffff [ 2.272929] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xa0000000-0xa3ffffff pref] [ 2.272935] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa3ffffff: [ 2.272954] excluding 0xa0000000-0xa3ffffff [ 2.275209] usbcore: registered new interface driver usbhid [ 2.275214] usbhid: USB HID core driver [ 2.301021] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input9 [ 2.301375] hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 2.346797] [drm] initialized overlay support [ 2.530838] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 240405 [ 2.530856] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 2.572942] fbcon: inteldrmfb (fb0) is primary device [ 2.586768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 3.048104] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 3.244094] Console: switching to colour frame buffer device 128x48 [ 3.247322] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.247325] i915 0000:00:02.0: registered panic notifier [ 3.247334] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.247451] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.C002.C003.C0BA 1 (20130117/utaddress-251) [ 3.247459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.247464] ACPI Warning: 0x0000000000001130-0x000000000000113f SystemIO conflicts with Region \_SB_.C002.C003.C0CC 1 (20130117/utaddress-251) [ 3.247470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.247472] ACPI Warning: 0x0000000000001100-0x000000000000112f SystemIO conflicts with Region \_SB_.C002.C003.C0CC 1 (20130117/utaddress-251) [ 3.247478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.247480] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.248497] leds_ss4200: no LED devices found [ 3.255780] iTCO_vendor_support: vendor-support=0 [ 3.256466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 3.256529] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 3.256732] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.645714] Adding 1987580k swap on /dev/sda2. Priority:-1 extents:1 across:1987580k SSD [ 3.663684] EXT4-fs (sda1): re-mounted. Opts: (null) [ 4.561021] EXT4-fs (sda1): re-mounted. Opts: commit=600,discard,errors=remount-ro [ 4.609791] fuse init (API version 7.21) [ 4.631188] loop: module loaded [ 5.571733] Bridge firewalling registered [ 5.576919] device eth0 entered promiscuous mode [ 5.579570] tg3 0000:08:00.0: irq 45 for MSI/MSI-X [ 5.750675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.752422] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 5.907286] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 7.388446] tg3 0000:08:00.0 eth0: Link is up at 100 Mbps, full duplex [ 7.388455] tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX [ 7.388488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.388524] br0: port 1(eth0) entered forwarding state [ 7.388537] br0: port 1(eth0) entered forwarding state [ 7.388565] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 8.525724] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input11 [ 22.432041] br0: port 1(eth0) entered forwarding state ** Model information sys_vendor: Hewlett-Packard product_name: HP Compaq nc4400 (EY605EA#ABD) product_version: F.0C chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 68YHV Ver. F.0C board_vendor: Hewlett-Packard board_name: 30B1 board_version: KBC Version 59.35 ** Loaded modules: binfmt_misc bridge stp llc loop fuse iTCO_wdt iTCO_vendor_support tpm_infineon hid_generic pcmcia joydev usbhid hid arc4 hp_wmi sparse_keymap coretemp kvm_intel kvm lpc_ich mfd_core psmouse pcspkr serio_raw rng_core evdev snd_hda_codec_si3054 iwl3945 iwlegacy snd_hda_codec_analog mac80211 tpm_tis yenta_socket tifm_7xx1 tpm tifm_core pcmcia_rsrc tpm_bios pcmcia_core i915 hp_accel lis3lv02d input_polldev snd_hda_intel cfg80211 rfkill snd_hda_codec video snd_hwdep snd_pcm drm_kms_helper wmi snd_page_alloc ac snd_timer battery drm snd i2c_algo_bit soundcore acpi_cpufreq mperf i2c_core button processor ext4 crc16 jbd2 mbcache dm_mod sg sd_mod crc_t10dif ata_generic microcode sdhci_pci ahci libahci ata_piix tg3 ptp sdhci mmc_core ehci_pci uhci_hcd ehci_hcd thermal pps_core libphy fan thermal_sys libata usbcore scsi_mod usb_common ** Network interface configuration: auto lo br0 iface lo inet loopback iface eth0 inet manual iface br0 inet static bridge_ports eth0 address 192.168.2.23 broadcast 192.168.2.255 netmask 255.255.255.0 gateway 192.168.2.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP qlen 1000 link/ether 00:16:d4:a4:9c:14 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:19:d2:25:ca:a2 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:16:d4:a4:9c:14 brd ff:ff:ff:ff:ff:ff inet 192.168.2.23/24 brd 192.168.2.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::216:d4ff:fea4:9c14/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed br0: 1061673 1051 0 0 0 0 0 0 54390 546 0 0 0 0 0 0 eth0: 1080567 1048 0 0 0 0 0 12 57447 551 0 0 0 0 0 0 lo: 577 9 0 0 0 0 0 0 577 9 0 0 0 0 0 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 794 total packets received 0 forwarded 0 incoming packets discarded 794 incoming packets delivered 525 requests sent out Icmp: 3 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 3 3 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 3 IcmpMsg: InType3: 3 OutType3: 3 Tcp: 6 active connections openings 0 passive connection openings 3 failed connection attempts 0 connection resets received 0 connections established 729 segments received 472 segments send out 0 segments retransmited 0 bad segments received. 4 resets sent Udp: 21 packets received 0 packets to unknown port received. 0 packet receive errors 31 packets sent UdpLite: TcpExt: 5 delayed acks sent 608 packet headers predicted 15 acknowledgments not containing data payload received TCPRcvCoalesce: 75 TCPOFOQueue: 76 IpExt: InMcastPkts: 49 OutMcastPkts: 39 InBcastPkts: 7 OutBcastPkts: 7 InOctets: 1051999 OutOctets: 43587 InMcastOctets: 4113 OutMcastOctets: 3817 InBcastOctets: 328 OutBcastOctets: 328 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4600000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 4000 [size=8] Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f4680000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f4700000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f4780000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: 000000009f800000-000000009f9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4000000-f40fffff Prefetchable memory behind bridge: 000000009fa00000-000000009fbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 4020 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 4040 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 4060 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 4080 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at f4784000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: f4200000-f45fffff Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 40a0 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] [8086:27c5] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 13f0 [size=8] Region 1: I/O ports at 15f4 [size=4] Region 2: I/O ports at 1370 [size=8] Region 3: I/O ports at 1574 [size=4] Region 4: I/O ports at 40d0 [size=16] Region 5: Memory at f4785000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: a0000000-a3ffffff (prefetchable) Memory window 1: a4000000-a7ffffff I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f4201000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 02:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at f4202000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore based SmartCard controller [104c:803d] Subsystem: Hewlett-Packard Company Device [103c:30b1] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4203000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at f4204000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express [14e4:16fd] (rev 21) Subsystem: Hewlett-Packard Company Device [103c:30b1] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Hewlett-Packard Company PRO/Wireless 3945ABG [Golan] Network Connection [103c:135c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 ** USB devices: Bus 002 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.112 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-1-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:4.05+dfsg-6+deb7u3 ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.38 pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: * linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--- End Message ---
--- Begin Message ---
- To: 713929-done@bugs.debian.org
- Cc: Jordi Oliveras <jordi.oliveras@ilimit.net>
- Subject: Re: Bug#713929: Fan working again with linux-image-3.10-2-amd64
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 13 Aug 2013 21:32:09 +0200
- Message-id: <1376422329.14079.120.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 520A5BC4.7050000@ilimit.net>
- References: <[🔎] 520A5BC4.7050000@ilimit.net>
Version: 3.10.5-1 On Tue, 2013-08-13 at 18:16 +0200, Jordi Oliveras wrote: > Ok, linux-image-3.10-2-amd64 entered to jessie/testing, installed it & > fan is working again! > > jors@plas:~$ acpi -V > (...) > Cooling 3: Fan 1 of 1 > Cooling 4: Fan 0 of 1 > Cooling 5: Fan 0 of 1 > Cooling 6: Fan 0 of 1 > > Thank you folks. I'm assuming you're the original reporter using a different address, so closing this. Ben. -- Ben Hutchings Experience is what causes a person to make new mistakes instead of old ones.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---