[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#706934: marked as done (firmware-linux-nonfree: Can't get network to work)



Your message dated Thu, 08 Aug 2013 23:42:34 +0200
with message-id <1375998154.2853.120.camel@deadeye.wl.decadent.org.uk>
and subject line Re: firmware-linux-nonfree: Can't get network to work
has caused the Debian Bug report #706934,
regarding firmware-linux-nonfree: Can't get network to work
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
706934: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=706934
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: firmware-linux-nonfree
Version: 0.36+wheezy.1
Severity: important

*** Please type your report below this line ***

Without internet connection, I have downloaded and installed the corresponding package manually; but I could not manage to make it work as expected...

Thanks in advance for your help


$ lspci | grep Bro
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe (rev 10)

$ sudo lspci -s 05:00.0 -vvx
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe (rev 10)
  Subsystem: Dell Device 0293
  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  Latency: 0, Cache Line Size: 64 bytes
  Interrupt: pin A routed to IRQ 68
  Region 0: Memory at f3de0000 (64-bit, non-prefetchable) [size=64K]
  Region 2: Memory at f3df0000 (64-bit, non-prefetchable) [size=64K]
  Capabilities: [48] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
  Capabilities: [40] Vital Product Data
    Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
    Read-only fields:
      [PN] Part number: BCM95761
      [EC] Engineering changes: 106679-15
      [SN] Serial number: 0123456789
      [MN] Manufacture ID: 31 34 65 34
      [RV] Reserved: checksum good, 28 byte(s) reserved
    Read/write fields:
      [YA] Asset tag: XYZ01234567
      [RW] Read-write area: 107 byte(s) free
    End
  Capabilities: [60] Vendor Specific Information: Len=6c <?>
  Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee00000  Data: 4099
  Capabilities: [cc] Express (v2) Endpoint, MSI 00
    DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
      ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
      RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
      MaxPayload 128 bytes, MaxReadReq 4096 bytes
    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
      ClockPM+ Surprise- LLActRep- BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
      ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
       Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
       Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
       EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  Capabilities: [100 v1] Advanced Error Reporting
    UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    CESta:  RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr-
    CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
  Capabilities: [13c v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb:  Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0:  Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
      Arb:  Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
      Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
      Status: NegoPending- InProgress-
  Capabilities: [160 v1] Device Serial Number b8-ac-6f-ff-fe-87-0d-7b
  Capabilities: [16c v1] Power Budgeting <?>
  Kernel driver in use: tg3
00: e4 14 81 16 06 04 10 00 10 00 00 02 10 00 00 00
10: 04 00 de f3 00 00 00 00 04 00 df f3 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 93 02
30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00

$ sudo lshw -class network
  *-network               
       description: Ethernet interface
       product: NetXtreme BCM5761 Gigabit Ethernet PCIe
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:05:00.0
       logical name: eth0
       version: 10
       serial: b8:ac:6f:87:0d:7b
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5761-v3.68 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:68 memory:f3de0000-f3deffff memory:f3df0000-f3dfffff


-- System Information:
Debian Release: 7.0
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'oldstable-updates'), (500, 'oldstable'), (500, 'stable'), (200, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/12 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

firmware-linux-nonfree depends on no packages.

firmware-linux-nonfree recommends no packages.

Versions of packages firmware-linux-nonfree suggests:
ii  initramfs-tools               0.109.1    generic modular initramfs generato
di  linux-image-3.2.0-4-amd64 [li 3.2.41-2   Linux 3.2 for 64-bit PCs

-- no debconf information

--- End Message ---
--- Begin Message ---
On Mon, 2013-05-06 at 12:38 +0200, Arnaud Gelas wrote:
> Package: firmware-linux-nonfree
> 
> Version: 0.36+wheezy.1
> Severity: important
> 
> 
> *** Please type your report below this line ***
> 
> 
> Without internet connection, I have downloaded and installed the
> corresponding package manually; but I could not manage to make it work
> as expected...
> 
> 
> Thanks in advance for your help
> 
> 
> 
> 
> $ lspci | grep Bro
> 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761
> Gigabit Ethernet PCIe (rev 10)
[...]

This device doesn't need any firmware package.  Please send questions to
the debian-user mailing list or other support forum.

Ben.


-- 
Ben Hutchings
The two most common things in the universe are hydrogen and stupidity.

--- End Message ---

Reply to: