Bug#719002: linux-image-3.10-1-amd64: 3.10.3 introduced a SCSI/USB bug that breaks many external mass storage
Package: src:linux
Version: 3.10.1-1
Severity: important
Tags: upstream patch
[bug is in latest 3.10.3 only, but I have had to downgrade]
Linux kernel 3.10.3 (as in latest version of this pkg) introduced a
SCSI bug that breaks many external USB mass storage devices, both USB
2.0 and USB 3.0:
http://marc.info/?l=linux-usb&m=137543957427729&w=2
A patch has been submitted:
https://www.kernel.org/pub/linux/kernel/people/jejb/scsi-for-next.changelog
but has not yet been released in 3.10.4 or 3.10.5.
As the patch is just a couple of lines added to the SCSI driver, perhaps
it would be worthwhile for the Debian kernel to include it, right now,
until it gets fixed in (presumably) 3.10.6, which could be a week or
more away?
The bug breaks 90% of external mass storage on my system, both USB 2.0
and USB 3.0, and I've had to downgrade. A Google on the errors (see
first link) shows lots of people reporting similar.
thanks much indeed.
best regards,
calum.
-- Package-specific info:
** Version:
Linux version 3.10-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.1-1 (2013-07-16)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-1-amd64 root=UUID=9dbfd63a-2da2-4c8d-a778-3649ae8b6ce7 ro quiet
** Not tainted
** Kernel log:
[ 6805.068047] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6805.081420] ata5.00: configured for UDMA/133
[ 6805.081434] ata5: EH complete
[ 7336.778101] ata5.00: exception Emask 0x10 SAct 0x2 SErr 0x280000 action 0x6 frozen
[ 7336.778107] ata5.00: irq_stat 0x08000000, interface fatal error
[ 7336.778110] ata5: SError: { 10B8B BadCRC }
[ 7336.778113] ata5.00: failed command: READ FPDMA QUEUED
[ 7336.778119] ata5.00: cmd 60/00:08:00:05:59/02:00:02:00:00/40 tag 1 ncq 262144 in
[ 7336.778119] res 40/00:0c:00:05:59/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 7336.778123] ata5.00: status: { DRDY }
[ 7336.778129] ata5: hard resetting link
[ 7337.096036] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7337.109493] ata5.00: configured for UDMA/133
[ 7337.109508] ata5: EH complete
[11185.365302] ata5.00: exception Emask 0x10 SAct 0x1 SErr 0x380000 action 0x6 frozen
[11185.365308] ata5.00: irq_stat 0x08000000, interface fatal error
[11185.365311] ata5: SError: { 10B8B Dispar BadCRC }
[11185.365314] ata5.00: failed command: READ FPDMA QUEUED
[11185.365320] ata5.00: cmd 60/00:00:00:d5:9a/02:00:92:00:00/40 tag 0 ncq 262144 in
[11185.365320] res 40/00:04:00:d5:9a/00:00:92:00:00/40 Emask 0x10 (ATA bus error)
[11185.365324] ata5.00: status: { DRDY }
[11185.365331] ata5: hard resetting link
[11185.684045] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[11185.697251] ata5.00: configured for UDMA/133
[11185.697268] ata5: EH complete
[12756.455355] ata5.00: exception Emask 0x10 SAct 0x2 SErr 0x180000 action 0x6 frozen
[12756.455361] ata5.00: irq_stat 0x08000000, interface fatal error
[12756.455364] ata5: SError: { 10B8B Dispar }
[12756.455368] ata5.00: failed command: READ FPDMA QUEUED
[12756.455374] ata5.00: cmd 60/00:08:00:b9:d5/02:00:36:00:00/40 tag 1 ncq 262144 in
[12756.455374] res 40/00:0c:00:b9:d5/00:00:36:00:00/40 Emask 0x10 (ATA bus error)
[12756.455377] ata5.00: status: { DRDY }
[12756.455384] ata5: hard resetting link
[12756.772032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12756.785587] ata5.00: configured for UDMA/133
[12756.785602] ata5: EH complete
[13976.792896] ata5.00: exception Emask 0x10 SAct 0x3 SErr 0x300000 action 0x6 frozen
[13976.792901] ata5.00: irq_stat 0x08000000, interface fatal error
[13976.792903] ata5: SError: { Dispar BadCRC }
[13976.792905] ata5.00: failed command: READ FPDMA QUEUED
[13976.792909] ata5.00: cmd 60/00:00:90:51:03/02:00:a8:00:00/40 tag 0 ncq 262144 in
[13976.792909] res 40/00:0c:90:4f:03/00:00:a8:00:00/40 Emask 0x10 (ATA bus error)
[13976.792912] ata5.00: status: { DRDY }
[13976.792913] ata5.00: failed command: READ FPDMA QUEUED
[13976.792917] ata5.00: cmd 60/00:08:90:4f:03/02:00:a8:00:00/40 tag 1 ncq 262144 in
[13976.792917] res 40/00:0c:90:4f:03/00:00:a8:00:00/40 Emask 0x10 (ATA bus error)
[13976.792919] ata5.00: status: { DRDY }
[13976.792924] ata5: hard resetting link
[13977.112048] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13977.125297] ata5.00: configured for UDMA/133
[13977.125314] ata5: EH complete
[14519.163122] ata5.00: exception Emask 0x10 SAct 0x1 SErr 0x380000 action 0x6 frozen
[14519.163130] ata5.00: irq_stat 0x08000000, interface fatal error
[14519.163132] ata5: SError: { 10B8B Dispar BadCRC }
[14519.163135] ata5.00: failed command: READ FPDMA QUEUED
[14519.163139] ata5.00: cmd 60/00:00:00:a1:0c/02:00:aa:00:00/40 tag 0 ncq 262144 in
[14519.163139] res 40/00:04:00:a1:0c/00:00:aa:00:00/40 Emask 0x10 (ATA bus error)
[14519.163141] ata5.00: status: { DRDY }
[14519.163146] ata5: hard resetting link
[14519.480040] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14519.493629] ata5.00: configured for UDMA/133
[14519.493646] ata5: EH complete
[14589.048703] ata5.00: exception Emask 0x10 SAct 0x1 SErr 0x280000 action 0x6 frozen
[14589.048708] ata5.00: irq_stat 0x08000000, interface fatal error
[14589.048711] ata5: SError: { 10B8B BadCRC }
[14589.048715] ata5.00: failed command: READ FPDMA QUEUED
[14589.048721] ata5.00: cmd 60/00:00:08:1e:ce/02:00:a5:00:00/40 tag 0 ncq 262144 in
[14589.048721] res 40/00:04:08:1e:ce/00:00:a5:00:00/40 Emask 0x10 (ATA bus error)
[14589.048724] ata5.00: status: { DRDY }
[14589.048731] ata5: hard resetting link
[14589.368048] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14589.381323] ata5.00: configured for UDMA/133
[14589.381340] ata5: EH complete
[14990.572119] ata5.00: exception Emask 0x10 SAct 0x3 SErr 0x80000 action 0x6 frozen
[14990.572124] ata5.00: irq_stat 0x08000000, interface fatal error
[14990.572128] ata5: SError: { 10B8B }
[14990.572131] ata5.00: failed command: READ FPDMA QUEUED
[14990.572137] ata5.00: cmd 60/00:00:20:5f:81/02:00:a5:00:00/40 tag 0 ncq 262144 in
[14990.572137] res 40/00:04:20:5f:81/00:00:a5:00:00/40 Emask 0x10 (ATA bus error)
[14990.572141] ata5.00: status: { DRDY }
[14990.572143] ata5.00: failed command: READ FPDMA QUEUED
[14990.572149] ata5.00: cmd 60/00:08:20:61:81/02:00:a5:00:00/40 tag 1 ncq 262144 in
[14990.572149] res 40/00:04:20:5f:81/00:00:a5:00:00/40 Emask 0x10 (ATA bus error)
[14990.572152] ata5.00: status: { DRDY }
[14990.572158] ata5: hard resetting link
[14990.892044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14990.905163] ata5.00: configured for UDMA/133
[14990.905178] ata5: EH complete
[15362.517325] ata5.00: exception Emask 0x10 SAct 0x1 SErr 0x300000 action 0x6 frozen
[15362.517331] ata5.00: irq_stat 0x08000000, interface fatal error
[15362.517334] ata5: SError: { Dispar BadCRC }
[15362.517338] ata5.00: failed command: READ FPDMA QUEUED
[15362.517344] ata5.00: cmd 60/00:00:00:4d:d3/02:00:37:00:00/40 tag 0 ncq 262144 in
[15362.517344] res 40/00:04:00:4d:d3/00:00:37:00:00/40 Emask 0x10 (ATA bus error)
[15362.517347] ata5.00: status: { DRDY }
[15362.517358] ata5: hard resetting link
[15362.836044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15362.849408] ata5.00: configured for UDMA/133
[15362.849423] ata5: EH complete
[37881.746405] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0519
board_vendor: ASUSTeK Computer INC.
board_name: P5N7A-VM
board_version: Rev 1.xx
** Loaded modules:
usb_storage
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
parport_pc
ppdev
lp
parport
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
xt_multiport
ipt_MASQUERADE
xt_addrtype
xt_conntrack
ipt_REJECT
xt_NFLOG
nfnetlink_log
nfnetlink
xt_limit
xt_tcpudp
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
iptable_filter
ip_tables
x_tables
hwmon_vid
loop
fuse
sha256_generic
cbc
dm_crypt
dm_mod
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
nouveau
coretemp
kvm_intel
mxm_wmi
ttm
drm_kms_helper
drm
kvm
snd_seq_midi_event
acpi_cpufreq
snd_rawmidi
i2c_algo_bit
snd_seq
snd_seq_device
snd_timer
snd
i2c_nforce2
i2c_core
shpchp
mperf
asus_atk0110
wmi
soundcore
processor
psmouse
video
serio_raw
thermal_sys
microcode
evdev
pcspkr
button
ext4
crc16
jbd2
mbcache
hid_logitech
ff_memless
usbhid
hid
sg
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
e1000
pata_jmicron
ahci
libahci
xhci_hcd
ehci_pci
ohci_hcd
ehci_hcd
libata
forcedeth
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: NVIDIA Corporation MCP79 Host Bridge [10de:0a80] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a88] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:03.0 ISA bridge [0601]: NVIDIA Corporation MCP79 LPC Bridge [10de:0aac] (rev b2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 4f00 [size=256]
00:03.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0aa4] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus [0c05]: NVIDIA Corporation MCP79 SMBus [10de:0aa2] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 4900 [size=64]
Region 4: I/O ports at 4d00 [size=64]
Region 5: I/O ports at 4e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:03.3 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a89] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.4 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a98] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.5 Co-processor [0b40]: NVIDIA Corporation MCP79 Co-processor [10de:0aa3] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
Region 0: Memory at f9e80000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f9e7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at f9e7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:06.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9e7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:06.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f9e7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:08.0 Audio device [0403]: NVIDIA Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9e78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP79 Ethernet [10de:0ab0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f9e7c000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b480 [size=8]
Region 2: Memory at f9e7e400 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at f9e7e000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 SATA controller [0106]: NVIDIA Corporation MCP79 AHCI Controller [10de:0ab8] (rev b1) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b080 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at a880 [size=16]
Region 5: Memory at f9e76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fbdfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:15.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
01:06.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f9fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f9fc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=64]
Expansion ROM at f9fa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000
03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9300 / nForce 730i] [10de:086c] (rev b1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at fbde0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:827e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Expansion ROM at fbff0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 2109:0700
Bus 004 Device 004: ID 2109:0700
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.10-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-15
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.39
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.39
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-1-amd64/postinst/depmod-error-initrd-3.10-1-amd64: false
linux-image-3.10-1-amd64/prerm/removing-running-kernel-3.10-1-amd64: true
linux-image-3.10-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-1-amd64/postinst/missing-firmware-3.10-1-amd64:
Reply to: