Your message dated Tue, 06 Aug 2013 16:27:28 +0200 with message-id <1375799248.2644.1.camel@deadeye.wl.decadent.org.uk> and subject line Re: linux-image-3.9-1-amd64: 3.9.8-1 freezes when libvirt/KVM guest VM attempts network I/O with virtio adapter has caused the Debian Bug report #716696, regarding linux-image-3.9-1-amd64: 3.9.8-1 freezes when libvirt/KVM guest VM attempts network I/O with virtio adapter to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 716696: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=716696 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-3.9-1-amd64: 3.9.8-1 freezes when libvirt/KVM guest VM attempts network I/O with virtio adapter
- From: C W <commparse@gmail.com>
- Date: Thu, 11 Jul 2013 10:09:43 -0400
- Message-id: <CAP49-iTzqmmmWzEy0ZbcTfhP3Ph1o-PViuR8otG6+yuB0saocw@mail.gmail.com>
Package: src:linux
Version: 3.9.8-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
3.9.8-1 freezes the host when an Ubuntu 12.04 32-bit or 64-bit guest VM using
libvirt/KVM attempts to go through the virtual network bridge using the virtio
adapter. This freeze is reproducible 100% of the time. The guest is using the
default libvirt network setup (NAT'ed with the virtual bridge virbr0, virtio
network adapter) so nothing is strange there. I have not yet seen a panic.
This issue is not present with the previous version of linux-image-3.9-1:
3.9.6-1
This issue is not present if you select a different type of network adapter
(e.g. e1000).
If it helps, the version of libvirt is the latest from testing: libvirt-
bin/libvirt0 0.9.12-11+deb7u1
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
root=UUID=3feee5b3-a3ec-4889-bce2-ff6aad370844 ro vga=791
** Not tainted
** Kernel log:
[ 8.317763] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 8.317766] nouveau [ DRM] DCB outp 01: 02011300 00000028
[ 8.317769] nouveau [ DRM] DCB outp 02: 02022386 0f200010
[ 8.317772] nouveau [ DRM] DCB outp 03: 02022332 00020010
[ 8.317775] nouveau [ DRM] DCB outp 04: 040333a6 0f200010
[ 8.317778] nouveau [ DRM] DCB outp 05: 04033312 00020010
[ 8.317781] nouveau [ DRM] DCB conn 00: 00000041
[ 8.317784] nouveau [ DRM] DCB conn 01: 00000100
[ 8.317787] nouveau [ DRM] DCB conn 02: 00005246
[ 8.317790] nouveau [ DRM] DCB conn 03: 0000a346
[ 8.326487] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.331358] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.331362] [drm] No driver support for vblank timestamp query.
[ 8.331366] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 8.331523] nouveau [ DRM] 4 available performance level(s)
[ 8.331528] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100%
[ 8.331533] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 250MHz voltage 900mV fanspeed 100%
[ 8.331538] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 400MHz voltage 1090mV fanspeed 100%
[ 8.331543] nouveau [ DRM] 3: core 580MHz shader 1450MHz memory 400MHz voltage 1170mV fanspeed 100%
[ 8.331548] nouveau [ DRM] c: core 275MHz shader 550MHz memory 249MHz voltage 900mV
[ 8.349668] nouveau [ DRM] MM: using M2MF for buffer copies
[ 8.362467] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:e8:94:c8:ae
[ 8.362472] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 8.362505] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1004FF-0FF
[ 8.447002] nouveau [ DRM] allocated 1600x1200 fb: 0x60000, bo ffff88011582cc00
[ 8.447074] fbcon: nouveaufb (fb0) is primary device
[ 8.499105] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 8.519444] Console: switching to colour frame buffer device 200x75
[ 8.522617] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 8.522641] nouveau 0000:01:00.0: registered panic notifier
[ 8.522666] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 8.531982] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.543364] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.543430] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.543495] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.543558] input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.572040] usb 7-3: new high-speed USB device number 2 using ehci-pci
[ 8.704478] usb 7-3: New USB device found, idVendor=413c, idProduct=2513
[ 8.704522] usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.705056] hub 7-3:1.0: USB hub found
[ 8.705217] hub 7-3:1.0: 3 ports detected
[ 8.816044] usb 7-4: new high-speed USB device number 3 using ehci-pci
[ 8.855403] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 8.872584] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 8.948438] usb 7-4: New USB device found, idVendor=413c, idProduct=2513
[ 8.948455] usb 7-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.948736] hub 7-4:1.0: USB hub found
[ 8.948818] hub 7-4:1.0: 3 ports detected
[ 9.448037] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 9.625081] usb 3-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 9.625100] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.625114] usb 3-1: Product: 5880
[ 9.625126] usb 3-1: Manufacturer: Broadcom Corp
[ 9.625134] usb 3-1: SerialNumber: 0123456789ABCD
[ 9.625254] usb 3-1: config 0 descriptor??
[ 9.708206] usb 7-4.1: new low-speed USB device number 5 using ehci-pci
[ 9.825936] usb 7-4.1: New USB device found, idVendor=10d5, idProduct=5000
[ 9.825959] usb 7-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.825967] usb 7-4.1: Product: Combo Free KVM
[ 9.825972] usb 7-4.1: Manufacturer: No brand
[ 10.210228] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.245018] usbcore: registered new interface driver usbhid
[ 10.245030] usbhid: USB HID core driver
[ 10.250034] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.1/7-4.1:1.0/input/input14
[ 10.250153] hid-generic 0003:10D5:5000.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand Combo Free KVM] on usb-0000:00:1a.7-4.1/input0
[ 10.250651] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.1/7-4.1:1.1/input/input15
[ 10.250861] hid-generic 0003:10D5:5000.0002: input,hidraw1: USB HID v1.10 Mouse [No brand Combo Free KVM] on usb-0000:00:1a.7-4.1/input1
[ 11.775303] EXT3-fs (sda1): using internal journal
[ 12.256067] fuse init (API version 7.21)
[ 12.321024] loop: module loaded
[ 12.598053] bio: create slab <bio-1> at 1
[ 13.002285] Adding 4194300k swap on /dev/mapper/vg-swap. Priority:-1 extents:1 across:4194300k
[ 14.330204] kjournald starting. Commit interval 5 seconds
[ 14.330693] EXT3-fs (dm-1): using internal journal
[ 14.330698] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 15.089483] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.182942] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.563859] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 16.664129] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 16.664292] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.249798] lp0: using parport0 (interrupt-driven).
[ 18.290586] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 18.555529] ppdev: user-space parallel port driver
[ 19.652905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 19.653054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.101837] Bridge firewalling registered
[ 22.162302] tun: Universal TUN/TAP device driver, 1.6
[ 22.162750] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 22.184157] device virbr0-nic entered promiscuous mode
[ 22.758983] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 26.038861] Ebtables v2.0 registered
[ 26.179325] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 106.004234] device vnet0 entered promiscuous mode
[ 106.018733] virbr0: topology change detected, propagating
[ 106.018738] virbr0: port 2(vnet0) entered forwarding state
[ 106.018746] virbr0: port 2(vnet0) entered forwarding state
[ 106.018804] IPv6: ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
[ 168.981852] virbr0: port 2(vnet0) entered disabled state
[ 168.982317] device vnet0 left promiscuous mode
[ 168.982320] virbr0: port 2(vnet0) entered disabled state
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A14
board_vendor: Dell Inc.
board_name: 0G868N
board_version:
** Loaded modules:
ip6table_filter
ip6_tables
ebtable_nat
ebtables
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
ipt_REJECT
xt_CHECKSUM
iptable_mangle
xt_tcpudp
tun
bridge
stp
llc
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
ppdev
lp
binfmt_misc
uinput
xt_limit
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
ip_tables
x_tables
loop
firewire_sbp2
fuse
dm_crypt
hid_generic
usbhid
hid
joydev
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
arc4
iwldvm
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
nouveau
mxm_wmi
e1000e
ttm
drm_kms_helper
ehci_pci
uhci_hcd
sg
mac80211
iTCO_wdt
ehci_hcd
coretemp
drm
snd_seq_device
sdhci_pci
usbcore
snd_timer
sdhci
kvm_intel
iTCO_vendor_support
sr_mod
i2c_algo_bit
acpi_cpufreq
mperf
mmc_core
firewire_ohci
firewire_core
cdrom
crc_itu_t
iwlwifi
snd
ptp
processor
kvm
parport_pc
parport
lpc_ich
mfd_core
usb_common
psmouse
pps_core
dell_laptop
dell_wmi
pcspkr
i2c_i801
i2c_core
soundcore
video
sparse_keymap
cfg80211
rfkill
serio_raw
wmi
battery
button
ac
evdev
dcdbas
ext3
mbcache
jbd
dm_mod
sd_mod
crc_t10dif
ahci
libahci
thermal
libata
thermal_sys
microcode
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f09fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f1c00000-f1efffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: f1b00000-f1bfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1bff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1bff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1bff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 003 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 007 Device 002: ID 413c:2513 Dell Computer Corp. internal USB Hub of E-Port Replicator
Bus 007 Device 003: ID 413c:2513 Dell Computer Corp. internal USB Hub of E-Port Replicator
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 005: ID 10d5:5000 Uni Class Technology Co., Ltd
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--- End Message ---
--- Begin Message ---
- To: 716696-done@bugs.debian.org
- Subject: Re: linux-image-3.9-1-amd64: 3.9.8-1 freezes when libvirt/KVM guest VM attempts network I/O with virtio adapter
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 06 Aug 2013 16:27:28 +0200
- Message-id: <1375799248.2644.1.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] CAP49-iSqueFRHHPZ+a+rO5fFhSqMnnqFta=4Lox5AANFVUtDog@mail.gmail.com>
- References: <CAP49-iTzqmmmWzEy0ZbcTfhP3Ph1o-PViuR8otG6+yuB0saocw@mail.gmail.com> <[🔎] 1375543525.32254.44.camel@deadeye.wl.decadent.org.uk> <[🔎] CAP49-iSqueFRHHPZ+a+rO5fFhSqMnnqFta=4Lox5AANFVUtDog@mail.gmail.com>
Version: 3.10.3-1 On Mon, 2013-08-05 at 12:35 -0400, C W wrote: > On Sat, Aug 3, 2013 at 11:25 AM, Ben Hutchings <ben@decadent.org.uk> > wrote: [...] > I don't see any changes between these two versions that seem > like they > could have caused this. Have you verified this by downgrading > to > 3.9.6-1? > > The bug does not appear to be in 3.9.6-1. > > Is the bug still present in 3.10.3-1, currently in unstable? > > The bug *also* does not appear to be in 3.10.3-1, which is good news. [...] OK, then I can mark this closed and the fix will find its way into testing shortly. I don't think anyone is going to spend time to make an interim fix to 3.9. Ben. -- Ben Hutchings This sentence contradicts itself - no actually it doesn't.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---