Control: tag -1 upstream patch Control: forwarded -1 https://bugzilla.kernel.org/show_bug.cgi?id=54021 Control: severity -1 important On Thu, 2013-08-01 at 18:27 +0200, Florian Junghanns wrote: > Package: src:linux > Version: 3.9.8-1 > Severity: normal > > Dear Maintainer, > > * What led up to the situation? > Installation of kernel 3.9 in the process of upgrading from > wheezy to testing. > * What exactly did you do (or not do) that was effective (or > ineffective)? > Cable network (ethernet) was connected. > * What was the outcome of this action? > No more packages are transmitted after a period of time > (3-45min). > * What outcome did you expect instead? > Packages are transmitted. > > Unplugging the cable and plugging it back in solves the problem for a > few minutes. > This is the same problem > as http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715056, but on > another network card (Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet). > Also, it appears to be the same as > https://bugzilla.kernel.org/show_bug.cgi?id=54021. I have been following the progress of that bug already. Could you test the attached patch, following the instructions at <http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official>? Ben. -- Ben Hutchings Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp
From: Eric Dumazet <edumazet@google.com>
Date: Mon, 29 Jul 2013 10:24:04 -0700
Subject: atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring
Origin: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit?id=7b70176421993866e616f1cbc4d0dd4054f1bf78
On Mon, 2013-07-29 at 08:30 -0700, Eric Dumazet wrote:
> On Mon, 2013-07-29 at 13:09 +0100, Luis Henriques wrote:
>
> >
> > I confirm that I can't reproduce the issue using this patch.
> >
>
> Thanks, I'll send a polished patch, as this one had an error if
> build_skb() returns NULL (in case sk_buff allocation fails)
Please try the following patch : It should use 2K frags instead of 4K
for normal 1500 mtu
Thanks !
[PATCH] atl1c: use custom skb allocator
We had reports ( https://bugzilla.kernel.org/show_bug.cgi?id=54021 )
that using high order pages for skb allocations is problematic for atl1c
We do not know exactly what the problem is, but we suspect that crossing
4K pages is not well supported by this hardware.
Use a custom allocator, using page allocator and 2K fragments for
optimal stack behavior. We might make this allocator generic
in future kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/atheros/atl1c/atl1c.h | 3 ++
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 40 ++++++++++++++++++++++++-
2 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
index b2bf324..0f05565 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
@@ -520,6 +520,9 @@ struct atl1c_adapter {
struct net_device *netdev;
struct pci_dev *pdev;
struct napi_struct napi;
+ struct page *rx_page;
+ unsigned int rx_page_offset;
+ unsigned int rx_frag_size;
struct atl1c_hw hw;
struct atl1c_hw_stats hw_stats;
struct mii_if_info mii; /* MII interface info */
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 786a874..a36a760 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -481,10 +481,15 @@ static int atl1c_set_mac_addr(struct net_device *netdev, void *p)
static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
struct net_device *dev)
{
+ unsigned int head_size;
int mtu = dev->mtu;
adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
+
+ head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ adapter->rx_frag_size = roundup_pow_of_two(head_size);
}
static netdev_features_t atl1c_fix_features(struct net_device *netdev,
@@ -952,6 +957,10 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
kfree(adapter->tpd_ring[0].buffer_info);
adapter->tpd_ring[0].buffer_info = NULL;
}
+ if (adapter->rx_page) {
+ put_page(adapter->rx_page);
+ adapter->rx_page = NULL;
+ }
}
/**
@@ -1639,6 +1648,35 @@ static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter,
skb_checksum_none_assert(skb);
}
+static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter)
+{
+ struct sk_buff *skb;
+ struct page *page;
+
+ if (adapter->rx_frag_size > PAGE_SIZE)
+ return netdev_alloc_skb(adapter->netdev,
+ adapter->rx_buffer_len);
+
+ page = adapter->rx_page;
+ if (!page) {
+ adapter->rx_page = page = alloc_page(GFP_ATOMIC);
+ if (unlikely(!page))
+ return NULL;
+ adapter->rx_page_offset = 0;
+ }
+
+ skb = build_skb(page_address(page) + adapter->rx_page_offset,
+ adapter->rx_frag_size);
+ if (likely(skb)) {
+ adapter->rx_page_offset += adapter->rx_frag_size;
+ if (adapter->rx_page_offset >= PAGE_SIZE)
+ adapter->rx_page = NULL;
+ else
+ get_page(page);
+ }
+ return skb;
+}
+
static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter)
{
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
@@ -1660,7 +1698,7 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter)
while (next_info->flags & ATL1C_BUFFER_FREE) {
rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
- skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len);
+ skb = atl1c_alloc_skb(adapter);
if (unlikely(!skb)) {
if (netif_msg_rx_err(adapter))
dev_warn(&pdev->dev, "alloc rx buffer failed\n");
Attachment:
signature.asc
Description: This is a digitally signed message part