Your message dated Mon, 22 Jul 2013 00:19:57 +0100 with message-id <1374448797.2804.103.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#717524: linux-image-3.2.0-4-amd64: ath9k fails on some bootups has caused the Debian Bug report #717524, regarding linux-image-3.2.0-4-amd64: ath9k fails on some bootups to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 717524: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=717524 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: ath9k fails on some bootups
- From: Ross Vandegrift <ross@kallisti.us>
- Date: Sun, 21 Jul 2013 18:26:29 -0400
- Message-id: <[🔎] 20130721222629.6788.42688.reportbug@vanvanmojo.kallisti.us>
Package: src:linux Version: 3.2.46-1 Severity: normal Hello, I have an AR9287 card using ath9k. Sometimes, the card will not come up correctly on boot. This happens approximately half of the time. Both 3.2.0-4-amd64 and 3.9-0.bpo.1-amd64 have the same issue. The card is a recently purchase, so I have not used it with older versions. When the card does not work, wpa_supplicant will not start. In this case, the following appears in dmesg: [ 4.468272] cfg80211: Calling CRDA to update world regulatory domain [ 4.487447] cfg80211: World regulatory domain updated: [ 4.487451] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.487454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.487457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.487459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.487461] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.487463] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) When the card does work, dmesg looks like this: [ 2.867222] cfg80211: Calling CRDA to update world regulatory domain [ 2.921382] ath9k 0000:02:00.0: setting latency timer to 64 [ 3.007927] ath: EEPROM regdomain: 0x809c [ 3.007929] ath: EEPROM indicates we should expect a country code [ 3.007931] ath: doing EEPROM country->regdmn map search [ 3.007933] ath: country maps to regdmn code: 0x52 [ 3.007934] ath: Country alpha2 being used: CN [ 3.007935] ath: Regpair used: 0x52 [ 3.087673] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 3.088131] Registered led device: ath9k-phy0 [ 3.088135] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90000660000, irq=18 [ 3.208517] cfg80211: World regulatory domain updated: [ 3.208521] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.208524] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.208526] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.208529] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.208531] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.208533] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.208592] cfg80211: Calling CRDA for country: CN [ 3.222548] cfg80211: Regulatory domain changed to country: CN [ 3.222557] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.222566] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3.222574] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 3.222697] cfg80211: Calling CRDA for country: US [ 3.243081] cfg80211: Regulatory domain changed to country: US [ 3.243085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.243088] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3.243090] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 3.243092] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.243094] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.243096] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.243098] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 8.570358] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.302606] wlan0: authenticate with f8:d1:11:ac:62:0a (try 1) [ 10.305017] wlan0: authenticated [ 10.338356] wlan0: associate with f8:d1:11:ac:62:0a (try 1) [ 10.342833] wlan0: RX AssocResp from f8:d1:11:ac:62:0a (capab=0x411 status=0 aid=2) [ 10.342837] wlan0: associated [ 10.351104] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.351197] cfg80211: Calling CRDA for country: US [ 10.360105] cfg80211: Regulatory domain changed to country: US [ 10.360109] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.360113] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 10.360116] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 10.360119] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.360121] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.360124] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.360127] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Full dmesg in both cases is attached. Thanks, Ross -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a2550452-7808-451e-8f22-b7a47b98b765 ro quiet ** Not tainted ** Kernel log: [ 3.350707] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 3.350728] cfg80211: Calling CRDA for country: US [ 3.357932] cfg80211: Regulatory domain changed to country: US [ 3.357935] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.357938] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3.357940] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 3.357943] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.357945] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.357947] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.357949] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3.372452] [drm] ring test on 0 succeeded in 0 usecs [ 3.372706] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.373442] [drm] Radeon Display Connectors [ 3.373447] [drm] Connector 0: [ 3.373452] [drm] VGA [ 3.373458] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 3.373463] [drm] Encoders: [ 3.373468] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.373472] [drm] Connector 1: [ 3.373476] [drm] HDMI-A [ 3.373480] [drm] HPD3 [ 3.373485] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 3.373491] [drm] Encoders: [ 3.373495] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 3.373550] [drm] radeon: power management initialized [ 3.377006] Linux media interface: v0.10 [ 3.431586] Linux video capture interface: v2.00 [ 3.437774] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d) [ 3.454202] [drm] fb mappable at 0xD0142000 [ 3.454206] [drm] vram apper at 0xD0000000 [ 3.454208] [drm] size 9216000 [ 3.454210] [drm] fb depth is 24 [ 3.454212] [drm] pitch is 7680 [ 3.454365] fbcon: radeondrmfb (fb0) is primary device [ 3.518611] Console: switching to colour frame buffer device 240x75 [ 3.535981] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.2/input/input6 [ 3.536155] usbcore: registered new interface driver uvcvideo [ 3.536158] USB Video Class driver (1.1.1) [ 3.561825] fb0: radeondrmfb frame buffer device [ 3.561831] drm: registered panic notifier [ 3.561849] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0 [ 3.562042] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [ 3.564631] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [ 3.564635] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 [ 3.564831] usbcore: registered new interface driver snd-usb-audio [ 4.960700] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k [ 5.002973] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 5.177572] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,discard [ 5.375829] loop: module loaded [ 7.763493] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard [ 7.936057] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 7.978417] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8.044145] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 8.653776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.402733] wlan0: authenticate with f8:d1:11:ac:62:0a (try 1) [ 10.405156] wlan0: authenticated [ 10.438573] wlan0: associate with f8:d1:11:ac:62:0a (try 1) [ 10.442230] wlan0: RX AssocResp from f8:d1:11:ac:62:0a (capab=0x411 status=0 aid=4) [ 10.442233] wlan0: associated [ 10.450393] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.450475] cfg80211: Calling CRDA for country: US [ 10.458970] cfg80211: Regulatory domain changed to country: US [ 10.458973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.458976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 10.458978] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 10.458981] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.458983] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.458985] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.458987] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 16.100985] RPC: Registered named UNIX socket transport module. [ 16.100993] RPC: Registered udp transport module. [ 16.100999] RPC: Registered tcp transport module. [ 16.101004] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.113938] FS-Cache: Loaded [ 16.130755] FS-Cache: Netfs 'nfs' registered for caching [ 16.141580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.134308] Bluetooth: Core ver 2.16 [ 18.134328] NET: Registered protocol family 31 [ 18.134330] Bluetooth: HCI device and connection manager initialized [ 18.134333] Bluetooth: HCI socket layer initialized [ 18.134335] Bluetooth: L2CAP socket layer initialized [ 18.134339] Bluetooth: SCO socket layer initialized [ 18.137099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.137101] Bluetooth: BNEP filters: protocol multicast [ 18.139091] Bluetooth: RFCOMM TTY layer initialized [ 18.139095] Bluetooth: RFCOMM socket layer initialized [ 18.139097] Bluetooth: RFCOMM ver 1.11 [ 18.301672] lp: driver loaded but no devices found [ 18.311831] ppdev: user-space parallel port driver [ 18.542158] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 18.542460] NFSD: starting 90-second grace period [ 18.842971] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.619126] fuse init (API version 7.17) [ 599.695649] EFI Variables Facility v0.08 2004-May-17 [ 599.742190] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 599.742790] SGI XFS Quota Management subsystem [ 599.746733] JFS: nTxBlock = 8192, nTxLock = 65536 [ 599.763536] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 599.779267] QNX4 filesystem 0.2.3 registered. [ 599.791882] Btrfs loaded ** Model information sys_vendor: BIOSTAR Group product_name: TA785GE 128M product_version: chassis_vendor: BIOSTAR Group chassis_version: bios_vendor: American Megatrends Inc. bios_version: 080015 board_vendor: BIOSTAR Group board_name: TA785GE 128M board_version: ** Loaded modules: btrfs crc32c libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd ext2 efivars fuse xt_multiport iptable_filter ip_tables x_tables parport_pc ppdev lp parport rfcomm bnep bluetooth binfmt_misc nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc cryptd aes_x86_64 aes_generic loop dm_crypt snd_hda_codec_hdmi snd_usb_audio snd_usbmidi_lib snd_seq_midi snd_seq_midi_event uvcvideo snd_rawmidi videodev v4l2_compat_ioctl32 media joydev usbhid snd_hda_codec_realtek hid arc4 psmouse evdev snd_seq snd_seq_device powernow_k8 serio_raw mperf snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd radeon edac_mce_amd edac_core ttm drm_kms_helper ath9k soundcore drm sp5100_tco ath9k_common i2c_piix4 power_supply i2c_algo_bit ath9k_hw ath mac80211 k10temp i2c_core cfg80211 rfkill shpchp wmi button processor ext4 crc16 jbd2 mbcache dm_mod md_mod microcode sg sd_mod crc_t10dif ata_generic usb_storage floppy thermal thermal_sys pata_atiixp ohci_hcd ahci libahci ehci_hcd r8169 mii libata scsi_mod usbcore usb_common ** Network interface configuration: auto lo iface lo inet loopback #allow-hotplug eth0 #iface eth0 inet dhcp auto wlan0 iface wlan0 inet static address 10.23.5.5 netmask 255.255.255.128 gateway 10.23.5.1 dns-search kallisti.us dns-nameservers 10.23.5.1 wpa-ssid fnords wpa-psk ********** auto wlan0:0 iface wlan0:0 inet static address 192.168.1.5 netmask 255.255.255.0 iface wlan0 inet6 auto ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:30:67:2f:42:05 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether f8:1a:67:ab:1d:48 brd ff:ff:ff:ff:ff:ff inet 10.23.5.5/25 brd 10.23.5.127 scope global wlan0 inet 192.168.1.5/24 brd 192.168.1.255 scope global wlan0:0 inet6 2001:470:1f07:4e6:fa1a:67ff:feab:1d48/64 scope global dynamic valid_lft 86164sec preferred_lft 14164sec inet6 fe80::fa1a:67ff:feab:1d48/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 8453 58 0 0 0 0 0 0 8453 58 0 0 0 0 0 0 wlan0: 4214935 7123 0 0 0 0 0 0 1648001 6525 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 3002 total packets received 7 with invalid addresses 0 forwarded 0 incoming packets discarded 2992 incoming packets delivered 2887 requests sent out Icmp: 303 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo requests: 1 echo replies: 302 336 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 33 echo request: 302 echo replies: 1 IcmpMsg: InType0: 302 InType8: 1 OutType0: 1 OutType3: 33 OutType8: 302 Tcp: 316 active connections openings 2 passive connection openings 6 failed connection attempts 32 connection resets received 17 connections established 5366 segments received 4880 segments send out 1 segments retransmited 42 bad segments received. 84 resets sent Udp: 818 packets received 33 packets to unknown port received. 0 packet receive errors 795 packets sent UdpLite: TcpExt: 1 packets pruned from receive queue because of socket buffer overrun 91 TCP sockets finished time wait in fast timer 171 delayed acks sent Quick ack mode was activated 22 times 2833 packet headers predicted 636 acknowledgments not containing data payload received 539 predicted acknowledgments 1 congestion windows recovered without slow start after partial ack 1 other TCP timeouts 23 packets collapsed in receive queue due to low socket buffer 22 DSACKs sent for old packets 1 connections reset due to unexpected data 31 connections reset due to early user close TCPSackShiftFallback: 3 TCPChallengeACK: 42 TCPSYNChallenge: 42 IpExt: InMcastPkts: 79 OutMcastPkts: 31 InBcastPkts: 25 OutBcastPkts: 24 InOctets: 1479996 OutOctets: 284865 InMcastOctets: 16608 OutMcastOctets: 6011 InBcastOctets: 1424 OutBcastOctets: 1096 ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601] Subsystem: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe800000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Biostar Microtech Int'l Corp Device [1565:8218] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3700] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710] (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device [1565:1704] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f] Subsystem: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) [168c:002e] (rev 01) Subsystem: Atheros Communications Inc. Device [168c:30a4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bc2:3008 Seagate RSS LLC Bus 001 Device 005: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub Bus 003 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse Bus 003 Device 003: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint Bus 001 Device 006: ID 046d:081d Logitech, Inc. HD Webcam C510 -- System Information: Debian Release: 7.1 APT prefers stable APT policy: (500, 'stable'), (40, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.112~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.36+wheezy.1 ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a2550452-7808-451e-8f22-b7a47b98b765 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afeb0000 (usable) [ 0.000000] BIOS-e820: 00000000afeb0000 - 00000000afebe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afebe000 - 00000000afee0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afee0000 - 00000000aff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: BIOSTAR Group TA785GE 128M/TA785GE 128M, BIOS 080015 10/07/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0xafeb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000afeb0000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afeb0000 page 4k [ 0.000000] kernel direct mapping tables up to afeb0000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 368e4000 - 3746a000 [ 0.000000] ACPI: RSDP 00000000000fad00 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000afeb0000 0003C (v01 100709 RSDT1705 20091007 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000afeb0200 00084 (v01 100709 FACP1705 20091007 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000afeb0450 09C5A (v01 88GCO 88GCOA07 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000afebe000 00040 [ 0.000000] ACPI: APIC 00000000afeb0390 0007C (v01 100709 APIC1705 20091007 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000afeb0410 0003C (v01 100709 OEMMCFG 20091007 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000afebe040 00072 (v01 100709 OEMB1705 20091007 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000afeba0b0 00038 (v01 100709 OEMHPET 20091007 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000afeba0f0 00458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000afeb0000 [ 0.000000] Initmem setup node 0 0000000000000000-00000000afeb0000 [ 0.000000] NODE_DATA [00000000afeab000 - 00000000afeaffff] [ 0.000000] [ffffea0000000000-ffffea00027fffff] PMD -> [ffff8800aca00000-ffff8800af1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afeb0 [ 0.000000] On node 0 totalpages: 720447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9796 pages used for memmap [ 0.000000] DMA32 zone: 706668 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:50000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800afc00000 s82944 r8192 d23552 u262144 [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 710590 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a2550452-7808-451e-8f22-b7a47b98b765 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 96000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Memory: 2819832k/2882240k available (3425k kernel code, 452k absent, 61956k reserved, 3314k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2800.449 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.89 BogoMIPS (lpj=11201796) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004049] Security Framework initialized [ 0.004054] AppArmor: AppArmor disabled by boot time parameter [ 0.004291] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008443] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009200] Mount-cache hash table entries: 256 [ 0.009315] Initializing cgroup subsys cpuacct [ 0.009318] Initializing cgroup subsys memory [ 0.009330] Initializing cgroup subsys devices [ 0.009333] Initializing cgroup subsys freezer [ 0.009335] Initializing cgroup subsys net_cls [ 0.009337] Initializing cgroup subsys blkio [ 0.009343] Initializing cgroup subsys perf_event [ 0.009369] tseg: 0000000000 [ 0.009382] CPU: Physical Processor ID: 0 [ 0.009384] CPU: Processor Core ID: 0 [ 0.009386] mce: CPU supports 6 MCE banks [ 0.009655] ACPI: Core revision 20110623 [ 0.016406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059165] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02 [ 0.060003] Performance Events: AMD PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 4 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000000f [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9a000 [ 0.148025] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148043] Brought up 2 CPUs [ 0.148045] Total of 2 processors activated (11201.27 BogoMIPS). [ 0.148556] devtmpfs: initialized [ 0.150703] PM: Registering ACPI NVS region at afebe000 (139264 bytes) [ 0.150703] print_constraints: dummy: [ 0.150703] NET: Registered protocol family 16 [ 0.150703] node 0 link 0: io port [1000, ffffff] [ 0.150703] TOM: 00000000c0000000 aka 3072M [ 0.150703] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.150703] node 0 link 0: mmio [a0000, bffff] [ 0.150703] node 0 link 0: mmio [c0000000, cfffffff] [ 0.150703] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.150703] node 0 link 0: mmio [f0000000, fe7fffff] [ 0.150703] node 0 link 0: mmio [fe800000, fe9fffff] [ 0.150703] node 0 link 0: mmio [fea00000, ffefffff] [ 0.150703] bus: [00, 07] on node 0 link 0 [ 0.150703] bus: 00 index 0 [io 0x0000-0xffff] [ 0.150703] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.150703] bus: 00 index 2 [mem 0xc0000000-0xdfffffff] [ 0.150703] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.150703] Extended Config Space enabled on 1 nodes [ 0.150703] ACPI: bus type pci registered [ 0.150703] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.150703] PCI: not using MMCONFIG [ 0.150703] PCI: Using configuration type 1 for base access [ 0.150703] PCI: Using configuration type 1 for extended access [ 0.152409] bio: create slab <bio-0> at 0 [ 0.152409] ACPI: Added _OSI(Module Device) [ 0.152409] ACPI: Added _OSI(Processor Device) [ 0.152409] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152409] ACPI: Added _OSI(Processor Aggregator Device) [ 0.152681] ACPI: EC: Look up EC in DSDT [ 0.153742] ACPI: Executed 4 blocks of module-level executable AML code [ 0.168471] ACPI: Interpreter enabled [ 0.168477] ACPI: (supports S0 S1 S4 S5) [ 0.168495] ACPI: Using IOAPIC for interrupt routing [ 0.168521] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.169613] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.187489] ACPI: No dock devices found. [ 0.187491] HEST: Table not found. [ 0.187495] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.187571] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.187722] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.187724] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.187727] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.187729] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.187731] pci_root PNP0A03:00: host bridge window [mem 0xaff00000-0xdfffffff] [ 0.187733] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.187737] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d09ff]) [ 0.187749] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.187793] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.187824] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.187854] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.187875] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604 [ 0.187904] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.187944] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.187962] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.187972] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.187981] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.187990] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.187999] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.188018] pci 0000:00:11.0: reg 24: [mem 0xfe7ffc00-0xfe7fffff] [ 0.188075] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.188087] pci 0000:00:12.0: reg 10: [mem 0xfe7fe000-0xfe7fefff] [ 0.188150] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.188162] pci 0000:00:12.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff] [ 0.188230] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.188248] pci 0000:00:12.2: reg 10: [mem 0xfe7ff800-0xfe7ff8ff] [ 0.188326] pci 0000:00:12.2: supports D1 D2 [ 0.188328] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.188351] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.188363] pci 0000:00:13.0: reg 10: [mem 0xfe7fc000-0xfe7fcfff] [ 0.188426] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.188438] pci 0000:00:13.1: reg 10: [mem 0xfe7f7000-0xfe7f7fff] [ 0.188506] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.188524] pci 0000:00:13.2: reg 10: [mem 0xfe7ff400-0xfe7ff4ff] [ 0.188602] pci 0000:00:13.2: supports D1 D2 [ 0.188604] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.188630] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.188726] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.188741] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.188750] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.188759] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.188768] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.188777] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.188834] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.188854] pci 0000:00:14.2: reg 10: [mem 0xfe7f0000-0xfe7f3fff 64bit] [ 0.188917] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.188933] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.189006] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.189047] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.189059] pci 0000:00:14.5: reg 10: [mem 0xfe7f6000-0xfe7f6fff] [ 0.189124] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.189140] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.189152] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.189164] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.189179] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.189220] pci 0000:01:05.0: [1002:9710] type 0 class 0x000300 [ 0.189227] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.189231] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff] [ 0.189235] pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff] [ 0.189244] pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff] [ 0.189259] pci 0000:01:05.0: supports D1 D2 [ 0.189268] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403 [ 0.189275] pci 0000:01:05.1: reg 10: [mem 0xfe9e8000-0xfe9ebfff] [ 0.189301] pci 0000:01:05.1: supports D1 D2 [ 0.189338] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.189342] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.189344] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.189347] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.189381] pci 0000:02:00.0: [168c:ff1c] type 0 class 0x000200 [ 0.189397] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit] [ 0.189468] pci 0000:02:00.0: supports D1 [ 0.189470] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.196038] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.196044] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.196088] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.196101] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.196121] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.196134] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.196142] pci 0000:03:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref] [ 0.196190] pci 0000:03:00.0: supports D1 D2 [ 0.196192] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204039] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.204045] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.204047] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.204051] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.204119] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.204128] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.204130] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.204132] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.204135] pci 0000:00:14.4: bridge window [mem 0xaff00000-0xdfffffff] (subtractive decode) [ 0.204137] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.204153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.204373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.204405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.204438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.204484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.204542] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.204545] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.204547] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.209009] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.209045] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.209078] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.209110] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.209142] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.209174] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.209207] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *9 10 11 12 14 15) [ 0.209242] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.209407] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.209407] vgaarb: loaded [ 0.209407] vgaarb: bridge control possible 0000:01:05.0 [ 0.209407] PCI: Using ACPI for IRQ routing [ 0.217636] PCI: pci_cache_line_size set to 64 bytes [ 0.217706] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.217709] reserve RAM buffer: 00000000afeb0000 - 00000000afffffff [ 0.217810] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.217813] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.219848] Switching to clocksource hpet [ 0.219875] pnp: PnP ACPI init [ 0.219875] ACPI: bus type pnp registered [ 0.219875] pnp 00:00: [bus 00-ff] [ 0.219875] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.219875] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.219875] pnp 00:00: [io 0x0d00-0xffff window] [ 0.219875] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.219875] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.219875] pnp 00:00: [mem 0xaff00000-0xdfffffff window] [ 0.219875] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.219875] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.219875] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.219875] pnp 00:01: [mem 0xb0000000-0xbfffffff] [ 0.219875] system 00:01: [mem 0xb0000000-0xbfffffff] has been reserved [ 0.219875] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219875] pnp 00:02: [dma 4] [ 0.219875] pnp 00:02: [io 0x0000-0x000f] [ 0.219875] pnp 00:02: [io 0x0081-0x0083] [ 0.219875] pnp 00:02: [io 0x0087] [ 0.219875] pnp 00:02: [io 0x0089-0x008b] [ 0.219875] pnp 00:02: [io 0x008f] [ 0.219875] pnp 00:02: [io 0x00c0-0x00df] [ 0.219875] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.219875] pnp 00:03: [io 0x0070-0x0071] [ 0.219875] pnp 00:03: [irq 8] [ 0.219875] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219875] pnp 00:04: [io 0x0061] [ 0.219875] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.219875] pnp 00:05: [io 0x00f0-0x00ff] [ 0.219875] pnp 00:05: [irq 13] [ 0.219875] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.219875] pnp 00:06: [io 0x03f0-0x03f5] [ 0.219875] pnp 00:06: [io 0x03f7] [ 0.219875] pnp 00:06: [irq 6] [ 0.219875] pnp 00:06: [dma 2] [ 0.219875] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.219875] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.219875] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.219875] pnp 00:08: [io 0x0060] [ 0.219875] pnp 00:08: [io 0x0064] [ 0.219875] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.219875] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.219875] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.219875] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.219875] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219875] pnp 00:09: [io 0x0010-0x001f] [ 0.219875] pnp 00:09: [io 0x0022-0x003f] [ 0.219875] pnp 00:09: [io 0x0062-0x0063] [ 0.219875] pnp 00:09: [io 0x0065-0x006f] [ 0.219875] pnp 00:09: [io 0x0072-0x007f] [ 0.219875] pnp 00:09: [io 0x0080] [ 0.219875] pnp 00:09: [io 0x0084-0x0086] [ 0.219875] pnp 00:09: [io 0x0088] [ 0.219875] pnp 00:09: [io 0x008c-0x008e] [ 0.219875] pnp 00:09: [io 0x0090-0x009f] [ 0.219875] pnp 00:09: [io 0x00a2-0x00bf] [ 0.219875] pnp 00:09: [io 0x00b1] [ 0.219875] pnp 00:09: [io 0x00e0-0x00ef] [ 0.219875] pnp 00:09: [io 0x04d0-0x04d1] [ 0.219875] pnp 00:09: [io 0x040b] [ 0.219875] pnp 00:09: [io 0x04d6] [ 0.219875] pnp 00:09: [io 0x0c00-0x0c01] [ 0.219875] pnp 00:09: [io 0x0c14] [ 0.219875] pnp 00:09: [io 0x0c50-0x0c51] [ 0.219875] pnp 00:09: [io 0x0c52] [ 0.219875] pnp 00:09: [io 0x0c6c] [ 0.219875] pnp 00:09: [io 0x0c6f] [ 0.219875] pnp 00:09: [io 0x0cd0-0x0cd1] [ 0.219875] pnp 00:09: [io 0x0cd2-0x0cd3] [ 0.219875] pnp 00:09: [io 0x0cd4-0x0cd5] [ 0.219875] pnp 00:09: [io 0x0cd6-0x0cd7] [ 0.219875] pnp 00:09: [io 0x0cd8-0x0cdf] [ 0.219875] pnp 00:09: [io 0x0800-0x089f] [ 0.219875] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.219875] pnp 00:09: [io 0x0b00-0x0b0f] [ 0.219875] pnp 00:09: [io 0x0b20-0x0b3f] [ 0.219875] pnp 00:09: [io 0x0900-0x090f] [ 0.219875] pnp 00:09: [io 0x0910-0x091f] [ 0.219875] pnp 00:09: [io 0xfe00-0xfefe] [ 0.219875] pnp 00:09: [io 0x0060] [ 0.219875] pnp 00:09: [io 0x0064] [ 0.219875] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.219875] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 0.219875] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.219875] system 00:09: [io 0x040b] has been reserved [ 0.219875] system 00:09: [io 0x04d6] has been reserved [ 0.219875] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.219875] system 00:09: [io 0x0c14] has been reserved [ 0.219875] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.219875] system 00:09: [io 0x0c52] has been reserved [ 0.219875] system 00:09: [io 0x0c6c] has been reserved [ 0.219875] system 00:09: [io 0x0c6f] has been reserved [ 0.219875] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.219875] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 0.219875] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.219875] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.219875] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 0.219875] system 00:09: [io 0x0800-0x089f] has been reserved [ 0.219875] system 00:09: [io 0x0b00-0x0b0f] has been reserved [ 0.219875] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 0.219875] system 00:09: [io 0x0900-0x090f] has been reserved [ 0.219875] system 00:09: [io 0x0910-0x091f] has been reserved [ 0.219875] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.219875] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.219875] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.219875] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219875] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.219875] pnp 00:0a: [io 0x0a00-0x0a0f] [ 0.219875] pnp 00:0a: [io 0x0a10-0x0a1f] [ 0.219875] pnp 00:0a: [io 0x0a20-0x0a2f] [ 0.219875] pnp 00:0a: [io 0x0a30-0x0a3f] [ 0.219875] system 00:0a: [io 0x0a00-0x0a0f] has been reserved [ 0.219875] system 00:0a: [io 0x0a10-0x0a1f] has been reserved [ 0.219875] system 00:0a: [io 0x0a20-0x0a2f] has been reserved [ 0.219875] system 00:0a: [io 0x0a30-0x0a3f] has been reserved [ 0.219875] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219875] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.219875] pnp 00:0b: [irq 4] [ 0.219875] pnp 00:0b: [dma 0 disabled] [ 0.219875] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.219897] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.219938] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.219940] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220070] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.220072] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 0.220074] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.220076] pnp 00:0d: [mem 0x00100000-0xafefffff] [ 0.220078] pnp 00:0d: [mem 0xfec00000-0xffffffff] [ 0.220122] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.220125] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.220127] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.220130] system 00:0d: [mem 0x00100000-0xafefffff] could not be reserved [ 0.220132] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.220134] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.220221] pnp: PnP ACPI: found 14 devices [ 0.220222] ACPI: ACPI bus type pnp unregistered [ 0.227198] PCI: max bus depth: 1 pci_try_num: 2 [ 0.227214] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.227217] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.227219] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.227222] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.227226] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.227228] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.227232] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.227234] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.227237] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.227240] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.227243] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.227264] pci 0000:00:02.0: setting latency timer to 64 [ 0.227272] pci 0000:00:07.0: setting latency timer to 64 [ 0.227278] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.227280] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.227282] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.227284] pci_bus 0000:00: resource 7 [mem 0xaff00000-0xdfffffff] [ 0.227286] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.227288] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.227290] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff] [ 0.227292] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.227294] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.227296] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.227298] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.227300] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.227302] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.227304] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.227306] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.227308] pci_bus 0000:04: resource 7 [mem 0xaff00000-0xdfffffff] [ 0.227310] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.227376] NET: Registered protocol family 2 [ 0.227496] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.228514] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.231595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.231978] TCP: Hash tables configured (established 524288 bind 65536) [ 0.231980] TCP reno registered [ 0.231991] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.232056] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.232213] NET: Registered protocol family 1 [ 0.232224] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.676074] pci 0000:01:05.0: Boot video device [ 0.676083] PCI: CLS 64 bytes, default 64 [ 0.676136] Unpacking initramfs... [ 0.894524] Freeing initrd memory: 11800k freed [ 0.898881] IBS: LVT offset 1 assigned [ 0.898895] perf: AMD IBS detected (0x0000001f) [ 0.899099] audit: initializing netlink socket (disabled) [ 0.899110] type=2000 audit(1372542432.892:1): initialized [ 0.910923] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.911573] VFS: Disk quotas dquot_6.5.2 [ 0.911613] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.911684] msgmni has been set to 5530 [ 0.911866] alg: No test for stdrng (krng) [ 0.911896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.911899] io scheduler noop registered [ 0.911901] io scheduler deadline registered [ 0.911914] io scheduler cfq registered (default) [ 0.912061] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.912086] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.912165] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.912184] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 0.912297] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.912318] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.912320] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.912562] ERST: Table is not found! [ 0.912563] GHES: HEST is not enabled! [ 0.912654] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.933103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.977001] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.988336] Linux agpgart interface v0.103 [ 0.988429] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.988821] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.988827] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.988976] mousedev: PS/2 mouse device common for all mice [ 0.989018] rtc_cmos 00:03: RTC can wake from S4 [ 0.989151] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.989175] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.989183] cpuidle: using governor ladder [ 0.989185] cpuidle: using governor menu [ 0.989342] TCP cubic registered [ 0.989400] NET: Registered protocol family 10 [ 0.989778] Mobile IPv6 [ 0.989780] NET: Registered protocol family 17 [ 0.989783] Registering the dns_resolver key type [ 0.989929] PM: Hibernation image not present or could not be loaded. [ 0.989939] registered taskstats version 1 [ 0.990369] rtc_cmos 00:03: setting system clock to 2013-06-29 21:47:13 UTC (1372542433) [ 0.990399] Initializing network drop monitor service [ 0.991396] Freeing unused kernel memory: 576k freed [ 0.991547] Write protecting the kernel read-only data: 6144k [ 0.993743] Freeing unused kernel memory: 652k freed [ 0.996247] Freeing unused kernel memory: 692k freed [ 1.010512] udevd[49]: starting version 175 [ 1.033216] SCSI subsystem initialized [ 1.044806] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.044852] r8169 0000:03:00.0: setting latency timer to 64 [ 1.044902] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.045258] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000060a000, 00:30:67:2f:42:05, XID 083000c0 IRQ 42 [ 1.045261] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.049969] usbcore: registered new interface driver usbfs [ 1.049991] usbcore: registered new interface driver hub [ 1.057599] usbcore: registered new device driver usb [ 1.058006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.058063] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.058087] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.058098] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.058126] ehci_hcd 0000:00:12.2: debug port 1 [ 1.058157] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800 [ 1.060809] libata version 3.00 loaded. [ 1.068276] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.068305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.068307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068310] usb usb1: Product: EHCI Host Controller [ 1.068311] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd [ 1.068313] usb usb1: SerialNumber: 0000:00:12.2 [ 1.068437] hub 1-0:1.0: USB hub found [ 1.068441] hub 1-0:1.0: 6 ports detected [ 1.068565] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.068573] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.068581] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.068606] ehci_hcd 0000:00:13.2: debug port 1 [ 1.068635] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400 [ 1.068652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.080044] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.080072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.080075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080077] usb usb2: Product: EHCI Host Controller [ 1.080079] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd [ 1.080080] usb usb2: SerialNumber: 0000:00:13.2 [ 1.080195] hub 2-0:1.0: USB hub found [ 1.080198] hub 2-0:1.0: 6 ports detected [ 1.080568] ahci 0000:00:11.0: version 3.0 [ 1.080717] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.080721] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.082926] scsi0 : ahci [ 1.085285] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.085288] ACPI: Thermal Zone [THRM] (43 C) [ 1.095273] scsi1 : ahci [ 1.097163] scsi2 : ahci [ 1.097271] scsi3 : ahci [ 1.097333] scsi4 : ahci [ 1.097389] scsi5 : ahci [ 1.097438] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22 [ 1.097441] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22 [ 1.097445] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22 [ 1.097448] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22 [ 1.097451] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22 [ 1.097454] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22 [ 1.097560] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.097958] scsi6 : pata_atiixp [ 1.098872] scsi7 : pata_atiixp [ 1.099449] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.099451] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.099691] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.099704] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.099735] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000 [ 1.111879] FDC 0 is a post-1991 82077 [ 1.156059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.156062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156064] usb usb3: Product: OHCI Host Controller [ 1.156066] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd [ 1.156067] usb usb3: SerialNumber: 0000:00:12.0 [ 1.156236] hub 3-0:1.0: USB hub found [ 1.156242] hub 3-0:1.0: 3 ports detected [ 1.156380] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.156393] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.156411] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000 [ 1.216052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.216056] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216058] usb usb4: Product: OHCI Host Controller [ 1.216059] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd [ 1.216061] usb usb4: SerialNumber: 0000:00:12.1 [ 1.216220] hub 4-0:1.0: USB hub found [ 1.216226] hub 4-0:1.0: 3 ports detected [ 1.216670] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.216679] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.216708] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000 [ 1.276066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.276069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.276071] usb usb5: Product: OHCI Host Controller [ 1.276073] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd [ 1.276074] usb usb5: SerialNumber: 0000:00:13.0 [ 1.276233] hub 5-0:1.0: USB hub found [ 1.276240] hub 5-0:1.0: 3 ports detected [ 1.276353] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.276361] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.276379] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7f7000 [ 1.336067] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.336070] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.336072] usb usb6: Product: OHCI Host Controller [ 1.336073] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd [ 1.336075] usb usb6: SerialNumber: 0000:00:13.1 [ 1.336236] hub 6-0:1.0: USB hub found [ 1.336242] hub 6-0:1.0: 3 ports detected [ 1.336351] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.336359] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.336379] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7f6000 [ 1.396074] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.396077] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.396079] usb usb7: Product: OHCI Host Controller [ 1.396080] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd [ 1.396082] usb usb7: SerialNumber: 0000:00:14.5 [ 1.396267] hub 7-0:1.0: USB hub found [ 1.396274] hub 7-0:1.0: 2 ports detected [ 1.416082] ata6: SATA link down (SStatus 0 SControl 300) [ 1.416117] ata4: SATA link down (SStatus 0 SControl 300) [ 1.416186] ata5: SATA link down (SStatus 0 SControl 300) [ 1.416215] ata3: SATA link down (SStatus 0 SControl 300) [ 1.492057] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 1.588071] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.588099] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.600234] ata2.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF0, max UDMA/133 [ 1.600238] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.610207] ata2.00: configured for UDMA/133 [ 1.625230] usb 1-3: New USB device found, idVendor=0bc2, idProduct=3008 [ 1.625234] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.625236] usb 1-3: Product: FreeAgent [ 1.625237] usb 1-3: Manufacturer: Seagate [ 1.625239] usb 1-3: SerialNumber: 2GEWGVMX [ 1.627898] Initializing USB Mass Storage driver... [ 1.628034] scsi8 : usb-storage 1-3:1.0 [ 1.628105] usbcore: registered new interface driver usb-storage [ 1.628107] USB Mass Storage support registered. [ 1.635003] ata1.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133 [ 1.635007] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.693313] ata1.00: configured for UDMA/133 [ 1.693527] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 1.693799] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5 [ 1.699759] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.699795] sd 0:0:0:0: [sda] Write Protect is off [ 1.699797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.699813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.700133] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.700174] sd 1:0:0:0: [sdb] Write Protect is off [ 1.700176] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.700190] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.702006] sdb: sdb1 sdb2 [ 1.702371] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.713857] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.713889] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.736083] usb 1-4: new high-speed USB device number 5 using ehci_hcd [ 1.754649] sda: sda1 sda2 sda3 [ 1.755056] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.870305] usb 1-4: New USB device found, idVendor=05e3, idProduct=0606 [ 1.870309] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.870311] usb 1-4: Product: USB2.0 Hub [ 1.870749] hub 1-4:1.0: USB hub found [ 1.871052] hub 1-4:1.0: 4 ports detected [ 1.896059] Refined TSC clocksource calibration: 2800.157 MHz. [ 1.896066] Switching to clocksource tsc [ 2.136063] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 2.222503] microcode: CPU0: patch_level=0x01000098 [ 2.225272] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory [ 2.225320] microcode: CPU0: new patch_level=0x010000c7 [ 2.225331] microcode: CPU1: patch_level=0x01000098 [ 2.228079] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory [ 2.228130] microcode: CPU1: new patch_level=0x010000c7 [ 2.228182] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.274706] device-mapper: uevent: version 1.0.3 [ 2.274897] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.305044] usb 3-1: New USB device found, idVendor=046d, idProduct=c043 [ 2.305047] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.305050] usb 3-1: Product: USB-PS/2 Optical Mouse [ 2.305051] usb 3-1: Manufacturer: Logitech [ 2.315219] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input0 [ 2.315299] generic-usb 0003:046D:C043.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0 [ 2.315316] usbcore: registered new interface driver usbhid [ 2.315318] usbhid: USB HID core driver [ 2.328247] PM: Starting manual resume from disk [ 2.328251] PM: Hibernation image partition 8:3 present [ 2.328252] PM: Looking for hibernation image. [ 2.328566] PM: Image not found (code -22) [ 2.328569] PM: Hibernation image not present or could not be loaded. [ 2.337948] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.572089] usb 3-2: new low-speed USB device number 3 using ohci_hcd [ 2.628799] scsi 8:0:0:0: Direct-Access Seagate FreeAgent 0132 PQ: 0 ANSI: 4 [ 2.629361] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 2.630536] sd 8:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.631197] sd 8:0:0:0: [sdc] Write Protect is off [ 2.631201] sd 8:0:0:0: [sdc] Mode Sense: 2d 08 00 00 [ 2.631809] sd 8:0:0:0: [sdc] No Caching mode page present [ 2.631843] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 2.634062] sd 8:0:0:0: [sdc] No Caching mode page present [ 2.634095] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 2.634690] sdc: sdc1 [ 2.636934] sd 8:0:0:0: [sdc] No Caching mode page present [ 2.636967] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 2.636997] sd 8:0:0:0: [sdc] Attached SCSI disk [ 2.648166] udevd[432]: starting version 175 [ 2.734340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.734348] ACPI: Power Button [PWRB] [ 2.734401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.734404] ACPI: Power Button [PWRF] [ 2.743587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.745005] usb 3-2: New USB device found, idVendor=17ef, idProduct=6009 [ 2.745009] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.745012] usb 3-2: Product: ThinkPad USB Keyboard with TrackPoint [ 2.745013] usb 3-2: Manufacturer: Lite-On Technology Corp. [ 2.747566] wmi: Mapper loaded [ 2.753212] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3 [ 2.753276] generic-usb 0003:17EF:6009.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:12.0-2/input0 [ 2.768229] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input4 [ 2.768417] generic-usb 0003:17EF:6009.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:12.0-2/input1 [ 2.787157] [drm] Initialized drm 1.1.0 20060810 [ 2.818171] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 2.818175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.822339] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 2.822412] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 2.835988] [drm] radeon kernel modesetting enabled. [ 2.839843] radeon 0000:01:05.0: setting latency timer to 64 [ 2.839850] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1565:0x1704). [ 2.839869] [drm] register mmio base: 0xFE9F0000 [ 2.839871] [drm] register mmio size: 65536 [ 2.840146] EDAC MC: Ver: 2.1.0 [ 2.844548] ATOM BIOS: 113 [ 2.844574] radeon 0000:01:05.0: VRAM: 384M 0x00000000C0000000 - 0x00000000D7FFFFFF (384M used) [ 2.844576] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 2.844987] usb 1-4.1: new high-speed USB device number 6 using ehci_hcd [ 2.845002] [drm] Detected VRAM RAM=384M, BAR=256M [ 2.845004] [drm] RAM width 32bits DDR [ 2.847473] [TTM] Zone kernel: Available graphics memory: 1416776 kiB [ 2.847476] [TTM] Initializing pool allocator [ 2.847482] [TTM] Initializing DMA pool allocator [ 2.847505] [drm] radeon: 384M of VRAM memory ready [ 2.847506] [drm] radeon: 512M of GTT memory ready. [ 2.847522] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.847524] [drm] Driver supports precise vblank timestamp query. [ 2.847548] [drm] radeon: irq initialized. [ 2.847553] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.848701] [drm] radeon: ib pool ready. [ 2.848804] [drm] Loading RS780 Microcode [ 2.852818] MCE: In-kernel MCE decoding enabled. [ 2.854858] AMD64 EDAC driver v3.4.0 [ 2.854926] EDAC amd64: DRAM ECC disabled. [ 2.854934] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 2.854935] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 2.854936] (Note that use of the override may cause unknown side effects.) [ 2.862483] hda_intel: position_fix set to 1 for device 1565:8218 [ 2.866653] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor (2 cpu cores) (version 2.20.00) [ 2.866692] powernow-k8: 0 : pstate 0 (2800 MHz) [ 2.866694] powernow-k8: 1 : pstate 1 (2100 MHz) [ 2.866696] powernow-k8: 2 : pstate 2 (1600 MHz) [ 2.866697] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.914879] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 2.932581] platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory [ 2.944738] platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory [ 2.949720] platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory [ 2.953221] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 2.953583] radeon 0000:01:05.0: WB enabled [ 2.953586] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff8800aadc7c00 [ 2.985631] [drm] ring test on 0 succeeded in 1 usecs [ 2.985725] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.986015] [drm] Radeon Display Connectors [ 2.986017] [drm] Connector 0: [ 2.986018] [drm] VGA [ 2.986020] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 2.986021] [drm] Encoders: [ 2.986023] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.986024] [drm] Connector 1: [ 2.986025] [drm] HDMI-A [ 2.986026] [drm] HPD3 [ 2.986028] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 2.986030] [drm] Encoders: [ 2.986031] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 2.986053] [drm] radeon: power management initialized [ 3.046252] [drm] fb mappable at 0xD0142000 [ 3.046255] [drm] vram apper at 0xD0000000 [ 3.046256] [drm] size 9216000 [ 3.046257] [drm] fb depth is 24 [ 3.046259] [drm] pitch is 7680 [ 3.046376] fbcon: radeondrmfb (fb0) is primary device [ 3.094787] Console: switching to colour frame buffer device 240x75 [ 3.115478] fb0: radeondrmfb frame buffer device [ 3.115481] drm: registered panic notifier [ 3.116021] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0 [ 3.116494] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [ 3.193086] usb 1-4.1: New USB device found, idVendor=046d, idProduct=081d [ 3.193098] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.193106] usb 1-4.1: SerialNumber: 5E7532B0 [ 3.268939] usb 1-4.2: new full-speed USB device number 7 using ehci_hcd [ 3.362193] usb 1-4.2: New USB device found, idVendor=0a12, idProduct=0001 [ 3.362205] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.449231] Bluetooth: Core ver 2.16 [ 3.449275] NET: Registered protocol family 31 [ 3.449282] Bluetooth: HCI device and connection manager initialized [ 3.449290] Bluetooth: HCI socket layer initialized [ 3.449295] Bluetooth: L2CAP socket layer initialized [ 3.449665] Bluetooth: SCO socket layer initialized [ 3.452231] Linux media interface: v0.10 [ 3.455956] Linux video capture interface: v2.00 [ 3.468901] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 3.469131] usbcore: registered new interface driver btusb [ 3.470028] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d) [ 3.483038] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.2/input/input6 [ 3.483495] usbcore: registered new interface driver uvcvideo [ 3.483502] USB Video Class driver (1.1.1) [ 3.508394] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [ 3.508406] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 [ 3.508965] usbcore: registered new interface driver snd-usb-audio [ 4.182491] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k [ 4.225276] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 4.388685] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,discard [ 4.436408] loop: module loaded [ 4.468272] cfg80211: Calling CRDA to update world regulatory domain [ 4.487447] cfg80211: World regulatory domain updated: [ 4.487451] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.487454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.487457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.487459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.487461] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.487463] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.694923] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard [ 6.856754] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 6.891683] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.965981] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 7.802978] RPC: Registered named UNIX socket transport module. [ 7.802986] RPC: Registered udp transport module. [ 7.802992] RPC: Registered tcp transport module. [ 7.802997] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.815533] FS-Cache: Loaded [ 7.832252] FS-Cache: Netfs 'nfs' registered for caching [ 7.842651] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.558609] vboxdrv: Found 2 processor cores. [ 8.561015] vboxdrv: fAsync=0 offMin=0x352 offMax=0xf1a [ 8.561551] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 8.561553] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 8.615380] vboxpci: IOMMU not found (not registered) [ 8.896287] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.896289] Bluetooth: BNEP filters: protocol multicast [ 8.899011] Bluetooth: RFCOMM TTY layer initialized [ 8.899016] Bluetooth: RFCOMM socket layer initialized [ 8.899017] Bluetooth: RFCOMM ver 1.11 [ 8.979267] lp: driver loaded but no devices found [ 8.986083] ppdev: user-space parallel port driver [ 9.639394] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.902714] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 9.902886] NFSD: starting 90-second grace period
--- End Message ---
--- Begin Message ---
- To: 717524-done@bugs.debian.org
- Subject: Re: Bug#717524: linux-image-3.2.0-4-amd64: ath9k fails on some bootups
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 22 Jul 2013 00:19:57 +0100
- Message-id: <1374448797.2804.103.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20130721222629.6788.42688.reportbug@vanvanmojo.kallisti.us>
- References: <[🔎] 20130721222629.6788.42688.reportbug@vanvanmojo.kallisti.us>
On Sun, 2013-07-21 at 18:26 -0400, Ross Vandegrift wrote: > Package: src:linux > Version: 3.2.46-1 > Severity: normal > > Hello, > > I have an AR9287 card using ath9k. Sometimes, the card will not come up > correctly on boot. This happens approximately half of the time. Both > 3.2.0-4-amd64 and 3.9-0.bpo.1-amd64 have the same issue. The card is a > recently purchase, so I have not used it with older versions. > > When the card does not work, wpa_supplicant will not start. In this case, the > following appears in dmesg: > [ 4.468272] cfg80211: Calling CRDA to update world regulatory domain > [ 4.487447] cfg80211: World regulatory domain updated: > [ 4.487451] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 4.487454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 4.487457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 4.487459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 4.487461] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 4.487463] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [...] In this case the chip has not been detected at all. I don't know why cfg80211 is loaded when there is no wireless device found, but I don't think that's important. This device has PCI ID 168c:002e and PCI address 0000:02:00.0. But in the non-working log, we can see: [ 0.189381] pci 0000:02:00.0: [168c:ff1c] type 0 class 0x000200 address vendor:device Its device ID has changed! So of course it is not recognised. This is surely a hardware fault. First, check that the card is firmly plugged in. If that doesn't help, I think you should try to return it for redund or replacement. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---