[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#697635: marked as done (linux-image-3.7-trunk-amd64: System doesn't reboot nor power off with 3.7.1-1~experimental.2)



Your message dated Sun, 14 Jul 2013 23:18:29 -0700
with message-id <20130715061828.GF2962@elie.Belkin>
and subject line Re: [3.6.9 -> 3.7.1 regression] Dell D630: System doesn't reboot nor power off
has caused the Debian Bug report #697635,
regarding linux-image-3.7-trunk-amd64: System doesn't reboot nor power off with 3.7.1-1~experimental.2
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
697635: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=697635
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.7.1-1~experimental.2
Severity: important

Dear Maintainer,

Since upgrading to 3.7 my Dell D630 doesn't power off or reboot after the end of the runlevel.

The system shows "[info] Will now halt." or "[info] Will now restart." then seems to enter an infinite loop
(system starts to heat and fan is spinning fast)

Downgrading to 3.6 fixes the problem.

-- Package-specific info:
** Version:
Linux version 3.7-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP Debian 3.7.1-1~experimental.2

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.7-trunk-amd64 root=UUID=6c9b8e4c-e994-4158-b6de-616a055fc929 ro quiet nowatchdog

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[   16.450051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.450053] [drm] No driver support for vblank timestamp query.
[   16.501901] usb 3-2: New USB device found, idVendor=413c, idProduct=8140
[   16.501905] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   16.596879] Bluetooth: Core ver 2.16
[   16.596921] NET: Registered protocol family 31
[   16.596923] Bluetooth: HCI device and connection manager initialized
[   16.597137] Bluetooth: HCI socket layer initialized
[   16.597141] Bluetooth: L2CAP socket layer initialized
[   16.597149] Bluetooth: SCO socket layer initialized
[   16.616066] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[   16.628778] usbcore: registered new interface driver btusb
[   16.769997] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
[   16.770003] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   16.772056] hub 7-1:1.0: USB hub found
[   16.773993] hub 7-1:1.0: 4 ports detected
[   16.813128] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   16.837432] cfg80211: World regulatory domain updated:
[   16.837437] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.837440] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.837443] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.837446] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.837448] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.837451] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.054004] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[   17.175006] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
[   17.175010] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   17.175014] usb 7-1.2: Product: O2Micro CCID SC Reader
[   17.175017] usb 7-1.2: Manufacturer: O2
[   17.760229] nouveau  [     DRM] 3 available performance level(s)
[   17.760237] nouveau  [     DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
[   17.760242] nouveau  [     DRM] 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
[   17.760247] nouveau  [     DRM] 2: core 400MHz shader 800MHz memory 594MHz voltage 1150mV fanspeed 100%
[   17.760251] nouveau  [     DRM] c: core 275MHz shader 550MHz memory 302MHz
[   17.787654] nouveau  [     DRM] MM: using CRYPT for buffer copies
[   17.851634] composite sync not supported
[   17.942042] nouveau  [     DRM] allocated 1280x800 fb: 0x60000, bo ffff880071e0f800
[   17.942144] fbcon: nouveaufb (fb0) is primary device
[   17.983231] Console: switching to colour frame buffer device 160x50
[   17.985569] fb0: nouveaufb frame buffer device
[   17.985572] drm: registered panic notifier
[   17.985588] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[   18.104370] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x37 [snd_hda_intel] returns -11
[   18.314050] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   18.414141] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   18.762409] nvidia: module license 'NVIDIA' taints kernel.
[   18.762418] Disabling lock debugging due to kernel taint
[   18.794734] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[   18.794740] NVRM: This can occur when a driver such as nouveau, rivafb,
[   18.794740] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
[   18.794740] NVRM: the NVIDIA device(s).
[   18.794744] NVRM: Try unloading the conflicting kernel module (and/or
[   18.794744] NVRM: reconfigure your kernel without the conflicting
[   18.794744] NVRM: driver(s)), then try loading the NVIDIA kernel module
[   18.794744] NVRM: again.
[   18.794747] NVRM: No NVIDIA graphics adapter probed!
[   19.583965] Adding 3212284k swap on /dev/sda5.  Priority:-1 extents:1 across:3212284k 
[   19.623203] EXT4-fs (sda1): re-mounted. Opts: (null)
[   19.891702] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.089604] loop: module loaded
[   21.732613] RPC: Registered named UNIX socket transport module.
[   21.732617] RPC: Registered udp transport module.
[   21.732618] RPC: Registered tcp transport module.
[   21.732620] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   21.796232] FS-Cache: Loaded
[   21.819149] Key type dns_resolver registered
[   21.859359] FS-Cache: Netfs 'nfs' registered for caching
[   21.937806] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   22.299442] fuse init (API version 7.20)
[   23.928553] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   24.085133] lp: driver loaded but no devices found
[   24.114687] iwl3945 0000:0c:00.0: firmware: agent loaded iwlwifi-3945-2.ucode into memory
[   24.114694] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[   24.127075] ppdev: user-space parallel port driver
[   24.190397] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.276392] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x37 [snd_hda_intel] returns -11
[   24.373060] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[   24.408100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.581127] composite sync not supported
[   24.660039] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x37 [snd_hda_intel] returns -11
[   24.708194] composite sync not supported
[   24.854724] Ebtables v2.0 registered
[   24.953351] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.181398] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   26.079476] composite sync not supported
[   27.089765] composite sync not supported
[   27.214033] composite sync not supported
[   31.345837] wlan0: authenticate with 72:6c:46:44:77:9c
[   31.348367] wlan0: send auth to 72:6c:46:44:77:9c (try 1/3)
[   31.350138] wlan0: authenticated
[   31.352137] wlan0: associate with 72:6c:46:44:77:9c (try 1/3)
[   31.354907] wlan0: RX AssocResp from 72:6c:46:44:77:9c (capab=0x411 status=0 aid=1)
[   31.356295] wlan0: associated
[   31.356353] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.119699] composite sync not supported
[   36.245508] composite sync not supported
[   38.461132] composite sync not supported
[   38.585987] composite sync not supported
[   43.169718] composite sync not supported
[   43.296535] composite sync not supported

** Model information
sys_vendor: Dell Inc.
product_name: Latitude D630                   
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A17
board_vendor: Dell Inc.
board_name:       
board_version:    

** Loaded modules:
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
parport_pc
ppdev
lp
parport
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
binfmt_misc
uinput
fuse
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
arc4
btusb
bluetooth
snd_hda_codec_idt
iwl3945
iwlegacy
mac80211
cfg80211
nouveau
rfkill
coretemp
snd_hda_intel
snd_hda_codec
mxm_wmi
kvm_intel
ttm
drm_kms_helper
drm
snd_hwdep
sg
joydev
snd_pcm
kvm
tg3
snd_page_alloc
libphy
uhci_hcd
sr_mod
iTCO_wdt
snd_seq
snd_seq_device
snd_timer
i2c_algo_bit
i2c_i801
i2c_core
ehci_hcd
cdrom
iTCO_vendor_support
lpc_ich
usbcore
microcode
dell_wmi
mfd_core
snd
soundcore
sparse_keymap
usb_common
acpi_cpufreq
wmi
mperf
dell_laptop
dcdbas
evdev
psmouse
serio_raw
pcspkr
processor
video
button
battery
ac
ext4
crc16
jbd2
mbcache
dm_mod
sd_mod
crc_t10dif
ata_generic
thermal
thermal_sys
ata_piix
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
	Subsystem: Dell Device [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f2000000-f6efffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 6f20 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 6f00 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
	Subsystem: Dell Dell Latitude D630 [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f1f00000-f1ffffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f1e00000-f1efffff
	Prefetchable memory behind bridge: 0000000080600000-00000000807fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 6f80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 6f60 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 4: I/O ports at 6f40 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 6fa0 [size=16]
	Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: I/O ports at 6eb0 [size=8]
	Region 1: I/O ports at 6eb8 [size=4]
	Region 2: I/O ports at 6ec0 [size=8]
	Region 3: I/O ports at 6ec8 [size=4]
	Region 4: I/O ports at 6ee0 [size=16]
	Region 5: I/O ports at eff0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f6ffbf00 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 10c0 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [Quadro NVS 135M] [10de:042b] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:01f9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at df00 [size=128]
	[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
	Subsystem: Dell Device [1028:01f9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at f1ef0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
	Subsystem: Intel Corporation Device [8086:1021]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at f1fff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: iwl3945


** USB devices:
Bus 003 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader


-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (700, 'testing'), (600, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.7-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.7-trunk-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.7-trunk-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.7-trunk-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-23.1
pn  linux-doc-3.7           <none>

Versions of packages linux-image-3.7-trunk-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36
pn  firmware-libertas       <none>
ii  firmware-linux          0.36
ii  firmware-linux-nonfree  0.36
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.7-trunk-amd64/postinst/ignoring-ramdisk:
  linux-image-3.7-trunk-amd64/postinst/depmod-error-initrd-3.7-trunk-amd64: false
  linux-image-3.7-trunk-amd64/prerm/removing-running-kernel-3.7-trunk-amd64: true
  linux-image-3.7-trunk-amd64/postinst/missing-firmware-3.7-trunk-amd64:

--- End Message ---
--- Begin Message ---
Nicolas Le Cam wrote:

> Problem fixed in 3.9.8-1, certainly because of commit
> 67842e50729b9f9c9ebd1449735f2f3d129e2325 (in 3.9.7)

Thanks!  Closing.

--- End Message ---

Reply to: