Bug#716827: linux-image-3.9-1-amd64: Not detected laptop webcam with Jessie (ver: 3.9.8-1) although Wheezy (ver: 3.2.35-2) did it
Package: src:linux
Version: 3.9.8-1
Severity: normal
Dear Maintainer,
I installed Wheezy on March when frozen. This was version 3.2.35-2 of the
linux-image. The tested the webcam using Cheese because the laptop was recently
adquired. It worked out-of-the-box. The installer logged it as
/var/log/installer/hardware-summary:
usb-list: Bus 03 Device 03: BisonCam, NB Pro [5986:0400]
usb-list: Level 02 Parent 02 Port 00 Class ef(misc ) Subclass 02
Protocol 01
usb-list: Manufacturer: Bison
usb-list: Interface 00: Class 0e(video) Subclass 01 Protocol 00
Driver <none>
usb-list: Interface 01: Class 0e(video) Subclass 02 Protocol 00
Driver <none>
usb-list:
A month after releasing Wheezy as stable, I updated to Jessie. Last week I
wanted to use the webcam with Cheese again. The program started but nothing was
displayed. Messages in ~/.xsession-errors said that there was not any device. I
installed Camorama obtaining similar behavior and errors.
After searching, I was aware that any application can use /dev/video* because
it does not exist on my system. Neither any module related with a webcam is
loaded when booting the system (uvcvideo, ...). I loaded it manually via
modprobe and automatically using /etc/modules. The modules are loaded well but
nothing else happens (absence of /dev/video* file). Any log file in /var/log/*
makes reference to a webcam. Not a word using lspci and lsusb.
I am only a user and I have run out of ideas. If necessary, I can provide the
initial installation log files.
Thank you in advance,
robert
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/nyxVG-root ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 19.154782] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 19.154787] ACPI: Sleep Button [SLPB]
[ 19.154849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 19.155499] ACPI: Lid Switch [LID0]
[ 19.155580] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 19.155585] ACPI: Power Button [PWRF]
[ 19.156091] ACPI: Requesting acpi_cpufreq
[ 19.159414] ACPI: AC Adapter [AC] (on-line)
[ 19.160613] ACPI: Battery Slot [BAT0] (battery absent)
[ 19.166408] wmi: Mapper loaded
[ 19.171240] mei 0000:00:16.0: setting latency timer to 64
[ 19.171307] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 19.181240] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 19.183319] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 19.183325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.183330] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 19.183334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.183335] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 19.183339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.183340] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.185048] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 19.185055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.195962] cfg80211: Calling CRDA to update world regulatory domain
[ 19.206250] [drm] Initialized drm 1.1.0 20060810
[ 19.216139] [drm] Memory usable by graphics device = 2048M
[ 19.216146] i915 0000:00:02.0: setting latency timer to 64
[ 19.223399] iTCO_vendor_support: vendor-support=0
[ 19.223856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 19.223894] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 19.223950] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.228590] Bluetooth: Core ver 2.16
[ 19.228602] NET: Registered protocol family 31
[ 19.228604] Bluetooth: HCI device and connection manager initialized
[ 19.228610] Bluetooth: HCI socket layer initialized
[ 19.228613] Bluetooth: L2CAP socket layer initialized
[ 19.228617] Bluetooth: SCO socket layer initialized
[ 19.229654] usbcore: registered new interface driver btusb
[ 19.230209] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[ 19.235223] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 19.235231] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.235232] [drm] Driver supports precise vblank timestamp query.
[ 19.235277] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.237620] rtl8723ae 0000:02:00.0: firmware: agent aborted loading rtlwifi/rtl8723fw_B.bin (not found?)
[ 19.251503] cfg80211: World regulatory domain updated:
[ 19.251506] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.251509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.251511] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.251513] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.251514] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.251516] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.277923] fbcon: inteldrmfb (fb0) is primary device
[ 20.314061] Console: switching to colour frame buffer device 170x48
[ 20.320634] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 20.320638] i915 0000:00:02.0: registered panic notifier
[ 20.427974] ACPI Warning: _BQC returned an invalid level (20130117/video-502)
[ 20.428051] acpi device:43: registered as cooling_device8
[ 20.428109] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.428195] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.428422] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.428815] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 20.451802] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.451929] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.452027] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.473809] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 20.508304] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 20.805666] Adding 8785916k swap on /dev/mapper/nyxVG-swap. Priority:-1 extents:1 across:8785916k SS
[ 20.825946] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 20.864252] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 20.900820] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 21.033276] fuse init (API version 7.21)
[ 21.045507] loop: module loaded
[ 21.654666] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 22.078342] RPC: Registered named UNIX socket transport module.
[ 22.078348] RPC: Registered udp transport module.
[ 22.078350] RPC: Registered tcp transport module.
[ 22.078352] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.084135] FS-Cache: Loaded
[ 22.084808] Key type dns_resolver registered
[ 22.092392] FS-Cache: Netfs 'nfs' registered for caching
[ 22.101514] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.523528] vboxdrv: Found 8 processor cores.
[ 22.523689] vboxdrv: fAsync=0 offMin=0x164 offMax=0x1afb
[ 22.523753] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 22.523755] vboxdrv: Successfully loaded version 4.2.10_Debian (interface 0x001a0004).
[ 22.572815] vboxpci: IOMMU not found (not registered)
[ 22.604457] Bluetooth: RFCOMM TTY layer initialized
[ 22.604465] Bluetooth: RFCOMM socket layer initialized
[ 22.604467] Bluetooth: RFCOMM ver 1.11
[ 22.606833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.606836] Bluetooth: BNEP filters: protocol multicast
[ 22.606842] Bluetooth: BNEP socket layer initialized
[ 22.640600] lp: driver loaded but no devices found
[ 22.643637] ppdev: user-space parallel port driver
[ 22.704547] r8169 0000:03:00.2: firmware: agent loaded rtl_nic/rtl8411-1.fw into memory
[ 22.780769] r8169 0000:03:00.2 eth0: link down
[ 22.780783] r8169 0000:03:00.2 eth0: link down
[ 22.780810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.510210] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 24.391994] r8169 0000:03:00.2 eth0: link up
[ 24.392017] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: CLEVO CO.
product_name: W55xEU
product_version: Not Applicable
chassis_vendor: No Enclosure
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 4.6.5
board_vendor: CLEVO CO.
board_name: W55xEU
board_version: D02
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
pci_stub
cpufreq_stats
vboxpci(O)
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
loop
fuse
joydev
snd_hda_codec_hdmi
snd_hda_codec_via
btusb
bluetooth
iTCO_wdt
iTCO_vendor_support
snd_hda_intel
snd_hda_codec
snd_hwdep
rtl8723ae
i915
snd_pcm
rtlwifi
snd_page_alloc
mac80211
snd_seq
coretemp
snd_seq_device
drm_kms_helper
snd_timer
drm
kvm_intel
cfg80211
i2c_algo_bit
kvm
snd
rfkill
rtsx_pci_ms
i2c_i801
i2c_core
psmouse
pcspkr
memstick
soundcore
serio_raw
evdev
lpc_ich
acpi_cpufreq
mei
mperf
wmi
video
battery
processor
ac
button
ext4
crc16
jbd2
mbcache
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
rtsx_pci_sdmmc
mmc_core
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
microcode
r8169
mii
rtsx_pci
mfd_core
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
ehci_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7d1b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7200000-f7bfffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6800000-f71fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0550]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0726]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8723ae
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:0540]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
03:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Subsystem: CLEVO/KAPOK Computer Device [1558:0540]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f0a04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0a00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 002: ID 0bda:8723 Realtek Semiconductor Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: