[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#519140: marked as done (WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x8f/0xdc())



Your message dated Sat, 6 Jul 2013 18:00:34 +0200
with message-id <20130706160034.GG12523@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #519140,
regarding WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x8f/0xdc()
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
519140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=519140
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: minor

I get the follow Warning in dmesg

[ 1088.000117] ------------[ cut here ]------------
[ 1088.000133] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x8f/0xdc()
[ 1088.000147] Modules linked in: ipv6 loop container parport_pc parport button snd_pcm snd_timer irtty_sir sir_dev snd soundcore snd_page_alloc irda hisax_fcpcipnp hisax_isac hisax crc_ccitt isdn i2c_piix4shpchp intel_agp slhc i2c_core pci_hotplug agpgart psmouse pcspkr evdev sg sr_mod sd_mod cdrom ext3 jbd mbcache raid1 md_mod ide_disk ide_pci_generic usbhid hid ff_memless piix ide_core ata_generic uhci_hcdaic7xxx floppy libata scsi_transport_spi 3c59x mii usbcore scsi_mod dock thermal processor fan thermal_sys
[ 1088.000363] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1
[ 1088.000392]  [<c012256f>] warn_on_slowpath+0x40/0x66
[ 1088.000469]  [<c0134d68>] up+0x9/0x2a
[ 1088.000502]  [<c0122a10>] release_console_sem+0x173/0x18c
[ 1088.000611]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000637]  [<c0122ea7>] printk+0x14/0x18
[ 1088.000671]  [<c89df263>] isdn_net_tx_timeout+0x1d/0x4f [isdn]
[ 1088.000770]  [<c0266b31>] dev_watchdog+0x8f/0xdc
[ 1088.000805]  [<c0129658>] run_timer_softirq+0x11a/0x17c
[ 1088.000837]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000885]  [<c0126579>] __do_softirq+0x66/0xd3
[ 1088.000917]  [<c012662b>] do_softirq+0x45/0x53
[ 1088.000940]  [<c01268e2>] irq_exit+0x35/0x67
[ 1088.000961]  [<c0105f3f>] do_IRQ+0x52/0x63
[ 1088.000994]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001024]  [<c01042a7>] common_interrupt+0x23/0x28
[ 1088.001047]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001092]  [<c0114d54>] native_safe_halt+0x2/0x3
[ 1088.001139]  [<c0102683>] default_idle+0x2d/0x53
[ 1088.001161]  [<c01025ce>] cpu_idle+0xab/0xcb
[ 1088.001196]  =======================
[ 1088.001210] ---[ end trace ce97df7e538e590f ]---


-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=/dev/md0 ro quiet

** Tainted: G W (512)

** Kernel log:
[   38.054672] HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
[   38.054710] HiSax: DSS1 Rev. 2.32.2.3
[   38.054729] HiSax: 2 channels added
[   38.054742] HiSax: MAX_WAITING_CALLS added
[   38.055744] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   38.055764] PCI: setting IRQ 11 as level-triggered
[   38.055779] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   38.055807] hisax_fcpcipnp: found adapter Fritz!Card PCI at 0000:00:0c.0
[   38.874301] NET: Registered protocol family 23
[   41.089335] Error: Driver 'pcspkr' is already registered, aborting...
[   41.102479] input: Power Button (FF) as /class/input/input3
[   41.128832] ACPI: Power Button (FF) [PWRF]
[   42.185332] parport_pc 00:09: activated
[   42.185357] parport_pc 00:09: reported by Plug and Play ACPI
[   42.185405] parport0: PC-style at 0x278, irq 5 [PCSPP,EPP]
[   42.282141] parport_pc 00:0a: unable to assign resources
[   42.282242] parport_pc: probe of 00:0a failed with error -16
[   47.668606] Adding 987896k swap on /dev/md1.  Priority:-1 extents:1 across:987896k
[   48.392173] EXT3 FS on md0, internal journal
[   49.248212] loop: module loaded
[   51.907394] eth0:  setting half-duplex.
[  230.999974] NET: Registered protocol family 10
[  231.003030] lo: Disabled Privacy Extensions
[  241.568060] eth0: no IPv6 routers present
[  777.532032] kjournald starting.  Commit interval 5 seconds
[  777.532032] EXT3 FS on sda1, internal journal
[  777.532032] EXT3-fs: mounted filesystem with ordered data mode.
[  907.565182] isdn: Verbose-Level is 2
[  907.814746] ippp, open, slot: 0, minor: 0, state: 0000
[  907.814789] ippp_ccp: allocated reset data structure c60e4000
[ 1081.808059] OPEN: 169.255.255.169 -> 141.76.2.4 TCP, port: 54752 -> 80
[ 1081.808059] ippp0: dialing 1 0191011... 
[ 1088.000040] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1088.000073] isdn_tx_timeout dev ippp0 dialstate 4
[ 1088.000117] ------------[ cut here ]------------
[ 1088.000133] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x8f/0xdc()
[ 1088.000147] Modules linked in: ipv6 loop container parport_pc parport button snd_pcm snd_timer irtty_sir sir_dev snd soundcore snd_page_alloc irda hisax_fcpcipnp hisax_isac hisax crc_ccitt isdn i2c_piix4 shpchp intel_agp slhc i2c_core pci_hotplug agpgart psmouse pcspkr evdev sg sr_mod sd_mod cdrom ext3 jbd mbcache raid1 md_mod ide_disk ide_pci_generic usbhid hid ff_memless piix ide_core ata_generic uhci_hcd aic7xxx floppy libata scsi_transport_spi 3c59x mii usbcore scsi_mod dock thermal processor fan thermal_sys
[ 1088.000363] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1
[ 1088.000392]  [<c012256f>] warn_on_slowpath+0x40/0x66
[ 1088.000469]  [<c0134d68>] up+0x9/0x2a
[ 1088.000502]  [<c0122a10>] release_console_sem+0x173/0x18c
[ 1088.000611]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000637]  [<c0122ea7>] printk+0x14/0x18
[ 1088.000671]  [<c89df263>] isdn_net_tx_timeout+0x1d/0x4f [isdn]
[ 1088.000770]  [<c0266b31>] dev_watchdog+0x8f/0xdc
[ 1088.000805]  [<c0129658>] run_timer_softirq+0x11a/0x17c
[ 1088.000837]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000885]  [<c0126579>] __do_softirq+0x66/0xd3
[ 1088.000917]  [<c012662b>] do_softirq+0x45/0x53
[ 1088.000940]  [<c01268e2>] irq_exit+0x35/0x67
[ 1088.000961]  [<c0105f3f>] do_IRQ+0x52/0x63
[ 1088.000994]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001024]  [<c01042a7>] common_interrupt+0x23/0x28
[ 1088.001047]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001092]  [<c0114d54>] native_safe_halt+0x2/0x3
[ 1088.001139]  [<c0102683>] default_idle+0x2d/0x53
[ 1088.001161]  [<c01025ce>] cpu_idle+0xab/0xcb
[ 1088.001196]  =======================
[ 1088.001210] ---[ end trace ce97df7e538e590f ]---
[ 1088.808124] isdn: fcpcipnp0,ch0 cause: E001B
[ 1090.256049] isdn_net: local hangup ippp0
[ 1090.256085] ippp0: Chargesum is 0
[ 1128.000049] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1128.000082] isdn_tx_timeout dev ippp0 dialstate 0
[ 1128.000126] OPEN: 169.255.255.169 -> 141.76.2.4 TCP, port: 54752 -> 80
[ 1128.000167] ippp0: dialing 1 0191011... 
[ 1135.000130] isdn: fcpcipnp0,ch0 cause: E001B
[ 1136.452050] isdn_net: local hangup ippp0
[ 1136.452085] ippp0: Chargesum is 0
[ 1168.000051] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1168.000085] isdn_tx_timeout dev ippp0 dialstate 0
[ 1846.586912] ippp_ccp: freeing reset data structure c60e4000
[ 1846.908640] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1846.915499] __dev_addr_discard: address leakage! da_users=1
[ 1847.400487] isdn: Verbose-Level is 2
[ 1847.535466] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1847.635546] isdn: Verbose-Level is 2
[ 1847.899051] ippp, open, slot: 0, minor: 0, state: 0000
[ 1847.899095] ippp_ccp: allocated reset data structure c3a02000
[ 1847.902121] ippp, open, slot: 1, minor: 1, state: 0000
[ 1847.902160] ippp_ccp: allocated reset data structure c6606800
[ 1863.408522] ippp_ccp: freeing reset data structure c3a02000
[ 1863.411018] ippp_ccp: freeing reset data structure c6606800
[ 1863.555216] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1863.555252] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1863.562554] __dev_addr_discard: address leakage! da_users=1
[ 1863.899250] isdn: Verbose-Level is 2
[ 1864.001219] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1864.101886] isdn: Verbose-Level is 2
[ 1864.254885] ippp, open, slot: 0, minor: 0, state: 0000
[ 1864.254927] ippp_ccp: allocated reset data structure c3a02000
[ 1864.258057] ippp, open, slot: 1, minor: 1, state: 0000
[ 1864.258098] ippp_ccp: allocated reset data structure c6606800
[ 1967.417718] OPEN: 169.255.255.169 -> 213.9.73.106 UDP, port: 123 -> 123
[ 1967.417718] ippp0: dialing 1 0191011... 
[ 1974.416125] isdn: fcpcipnp0,ch0 cause: E001B
[ 1975.864050] isdn_net: local hangup ippp0
[ 1975.864086] ippp0: Chargesum is 0
[ 1984.000047] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1984.000080] isdn_tx_timeout dev ippp0 dialstate 0

** Loaded modules:
Module                  Size  Used by
ipv6                  235300  14 
loop                   12748  0 
container               3456  0 
parport_pc             22500  0 
parport                30988  1 parport_pc
button                  6096  0 
snd_pcm                62596  0 
snd_timer              17800  1 snd_pcm
irtty_sir               4480  0 
sir_dev                10724  1 irtty_sir
snd                    45604  2 snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7816  1 snd_pcm
irda                   95480  1 sir_dev
hisax_fcpcipnp          8320  3 
hisax_isac              6452  1 hisax_fcpcipnp
hisax                 397636  2 hisax_fcpcipnp,hisax_isac
crc_ccitt               2080  2 irda,hisax
isdn                  108352  5 hisax
i2c_piix4               7216  0 
shpchp                 25528  0 
intel_agp              22332  1 
slhc                    5408  1 isdn
i2c_core               19828  1 i2c_piix4
pci_hotplug            23460  1 shpchp
agpgart                28776  1 intel_agp
psmouse                32336  0 
pcspkr                  2432  0 
evdev                   8000  0 
sg                     26964  0 
sr_mod                 13316  0 
sd_mod                 22200  2 
cdrom                  30176  1 sr_mod
ext3                  105512  2 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
raid1                  18016  2 
md_mod                 67036  3 raid1
ide_disk               10496  3 
ide_pci_generic         3908  0 [permanent]
usbhid                 35904  0 
hid                    33184  1 usbhid
ff_memless              4392  1 usbhid
piix                    6568  0 [permanent]
ide_core               96168  3 ide_disk,ide_pci_generic,piix
ata_generic             4676  0 
uhci_hcd               18672  0 
aic7xxx               117592  1 
floppy                 47716  0 
libata                140384  1 ata_generic
scsi_transport_spi     19840  1 aic7xxx
3c59x                  35624  0 
mii                     4896  1 3c59x
usbcore               118160  3 usbhid,uhci_hcd
scsi_mod              129356  6 sg,sr_mod,sd_mod,aic7xxx,libata,scsi_transport_spi
dock                    8304  1 libata
thermal                15228  0 
processor              32576  1 thermal
fan                     4164  0 
thermal_sys            10856  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: fe000000-fecfffff
	Prefetchable memory behind bridge: f6000000-f6ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at fcf0 [size=16]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at f800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin ? routed to IRQ 9
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:0c.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] [1244:0a00] (rev 02)
	Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN Controller [1244:0a00]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fedffc00 (32-bit, non-prefetchable) [size=32]
	Region 1: I/O ports at f400 [size=32]
	Kernel driver in use: fcpci
	Kernel modules: hisax_fcpcipnp, hisax

00:0d.0 Ethernet controller [0200]: 3Com Corporation 3c900 10Mbps Combo [Boomerang] [10b7:9001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at e800 [size=64]
	[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
	Kernel driver in use: 3c59x
	Kernel modules: 3c59x

00:0e.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW/D / AIC-7881U [9004:8178] (rev 01)
	Subsystem: Adaptec AHA-2940UW SCSI Host Adapter [9004:7881]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 7
	Region 0: I/O ports at e400 [disabled] [size=256]
	Region 1: Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 10010000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP [102b:051f] (prog-if 00 [VGA controller])
	Subsystem: Matrox Graphics, Inc. Device [102b:2100]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f6000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at fecf8000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
	[virtual] Expansion ROM at fe800000 [disabled] [size=64K]
	Capabilities: [f0] AGP version 1.0
		Status: RQ=1 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=<none>
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Kernel modules: matroxfb_base



-- System Information:
Debian Release: 5.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
  linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
  linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000007ffe400 (usable)
[    0.000000]  BIOS-e820: 0000000007ffe400 - 0000000007fffc00 (ACPI data)
[    0.000000]  BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 127MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 32766) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    32766
[    0.000000]   HighMem     32766 ->    32766
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    32766
[    0.000000] On node 0 totalpages: 32766
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 224 pages used for memmap
[    0.000000]   Normal zone: 28446 pages, LIFO batch:7
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI not present or invalid.
[    0.000000] ACPI: RSDP 000F6B40, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 07FFE520, 0028 (r1 PTLTD    RSDT          0 PTL   1000000)
[    0.000000] ACPI: FACP 07FFE548, 0074 (r1 SAG    D1064           0         F4240)
[    0.000000] ACPI: DSDT 07FFE5BC, 1644 (r1 SAG       D1064        1 MSFT  100000B)
[    0.000000] ACPI: FACS 07FFFFC0, 0040
[    0.000000] ACPI: PM-Timer IO Port: 0xf0c8
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32510
[    0.000000] Kernel command line: root=/dev/md0 ro quiet
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffb000 (0110c000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Detected 348.935 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.004000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.004000] Memory: 119776k/131064k available (1769k kernel code, 10736k reserved, 752k data, 244k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xc8800000 - 0xff7fe000   ( 879 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xc7ffe000   ( 127 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02ba4ab - 0xc0376620   ( 752 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02ba4ab   (1769 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.084779] Calibrating delay using timer specific routine.. 699.52 BogoMIPS (lpj=1399059)
[    0.085009] Security Framework initialized
[    0.085039] SELinux:  Disabled at boot.
[    0.085060] Capability LSM initialized
[    0.085158] Mount-cache hash table entries: 512
[    0.085939] Initializing cgroup subsys ns
[    0.085961] Initializing cgroup subsys cpuacct
[    0.085978] Initializing cgroup subsys devices
[    0.086089] CPU: L1 I cache: 16K, L1 D cache: 16K
[    0.086109] CPU: L2 cache: 512K
[    0.086128] Intel machine check architecture supported.
[    0.086151] Intel machine check reporting enabled on CPU#0.
[    0.086216] Checking 'hlt' instruction... OK.
[    0.100878] SMP alternatives: switching to UP code
[    0.125001] Freeing SMP alternatives: 16k freed
[    0.125021] ACPI: Core revision 20080321
[    0.131815] ACPI: setting ELCR to 0200 (from 0e80)
[    0.134015] weird, boot CPU (#0) not listedby the BIOS.
[    0.134032] SMP motherboard not detected.
[    0.134046] Local APIC not detected. Using dummy APIC emulation.
[    0.134059] SMP disabled
[    0.134431] Brought up 1 CPUs
[    0.134448] Total of 1 processors activated (699.52 BogoMIPS).
[    0.134490] CPU0 attaching sched-domain:
[    0.134506]  domain 0: span 0
[    0.134519]   groups: 0
[    0.135811] net_namespace: 660 bytes
[    0.135838] Booting paravirtualized kernel on bare hardware
[    0.137444] NET: Registered protocol family 16
[    0.139332] ACPI: bus type pci registered
[    0.153898] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1
[    0.153916] PCI: Using configuration type 1 for base access
[    0.153936] Setting up standard PCI resources
[    0.166376] ACPI: EC: Look up EC in DSDT
[    0.174613] ACPI: Interpreter enabled
[    0.174631] ACPI: (supports S0 S1 S4 S5)
[    0.174711] ACPI: Using PIC for interrupt routing
[    0.188614] ACPI: Device [ECP] status [00000008]: functional but not present; setting present
[    0.192975] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.193735] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.193748] * this clock source is slow. Consider trying other clock sources
[    0.193838] pci 0000:00:07.3: quirk: region f0c0-f0ff claimed by PIIX4 ACPI
[    0.193859] pci 0000:00:07.3: quirk: region f0b0-f0bf claimed by PIIX4 SMB
[    0.194374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.202940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.203519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.204192] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.204773] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.205614] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.205886] pnp: PnP ACPI init
[    0.205932] ACPI: bus type pnp registered
[    0.214834] pnp: PnP ACPI: found 13 devices
[    0.214852] ACPI: ACPI bus type pnp unregistered
[    0.214868] PnPBIOS: Disabled by ACPI PNP
[    0.217243] PCI: Using ACPI for IRQ routing
[    0.218162] ACPI: RTC can wake from S4
[    0.218354] system 00:01: ioport range 0x370-0x371 has been reserved
[    0.218377] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.218396] system 00:01: ioport range 0xf80-0xf87 has been reserved
[    0.218415] system 00:01: ioport range 0xf88-0xf9f has been reserved
[    0.218434] system 00:01: ioport range 0xf0b0-0xf0bf has been reserved
[    0.218453] system 00:01: ioport range 0xf0c0-0xf0cf has been reserved
[    0.218471] system 00:01: ioport range 0xf0d0-0xf0ff has been reserved
[    0.251955] PCI: Bridge: 0000:00:01.0
[    0.251971]   IO window: disabled.
[    0.251989]   MEM window: 0xfe000000-0xfecfffff
[    0.252032]   PREFETCH window: 0x00000000f6000000-0x00000000f6ffffff
[    0.252192] NET: Registered protocol family 2
[    0.252815] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.254177] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.254354] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.254526] TCP: Hash tables configured (established 4096 bind 4096)
[    0.254543] TCP reno registered
[    0.255004] NET: Registered protocol family 1
[    0.255658] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[    1.926416]  it is
[    3.823323] Freeing initrd memory: 6302k freed
[    3.827068] audit: initializing netlink socket (disabled)
[    3.827135] type=2000 audit(1236700991.824:1): initialized
[    3.827801] Total HugeTLB memory allocated, 0
[    3.828345] VFS: Disk quotas dquot_6.5.1
[    3.828531] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.828770] msgmni has been set to 246
[    3.829518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.829542] io scheduler noop registered
[    3.829555] io scheduler anticipatory registered
[    3.829568] io scheduler deadline registered
[    3.829645] io scheduler cfq registered (default)
[    3.829696] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    3.829813] pci 0000:01:00.0: Boot video device
[    3.832422] isapnp: Scanning for PnP cards...
[    4.187740] isapnp: No Plug & Play device found
[    4.210899] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    4.216257] serial 00:0b: activated
[    4.216781] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.229295] brd: module loaded
[    4.229771] i8042 aux: probe of 00:07 failed with error -16
[    4.230081] PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
[    4.230101] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.231093] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.232309] mice: PS/2 mouse device common for all mice
[    4.233133] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.233197] rtc0: alarms up to one month, y3k
[    4.233504] cpuidle: using governor ladder
[    4.233521] cpuidle: using governor menu
[    4.233552] No iBFT detected.
[    4.236678] TCP cubic registered
[    4.236700] NET: Registered protocol family 17
[    4.236739] Using IPI No-Shortcut mode
[    4.237747] registered taskstats version 1
[    4.238261] rtc_cmos 00:03: setting system clock to 2009-03-10 16:03:13 UTC (1236700993)
[    4.239573] Freeing unused kernel memory: 244k freed
[    4.262694] input: AT Translated Set 2 keyboard as /class/input/input0
[    4.849533] ACPI: ACPI0007:00 is registered as cooling_device0
[    6.679793] No dock devices found.
[    7.650139] SCSI subsystem initialized
[    8.212697] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    8.212719] PCI: setting IRQ 10 as level-triggered
[    8.212734] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[    8.212763] 3c59x: Donald Becker and others.
[    8.212796] 0000:00:0d.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001e800.
[    8.367353] usbcore: registered new interface driver usbfs
[    8.367514] usbcore: registered new interface driver hub
[    8.367802] usbcore: registered new device driver usb
[    8.771335] Floppy drive(s): fd0 is 1.44M
[    8.795228] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[    8.795251] PCI: setting IRQ 7 as level-triggered
[    8.795266] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
[    8.824743] FDC 0 is a post-1991 82077
[    8.829299] libata version 3.00 loaded.
[    8.829871] USB Universal Host Controller Interface driver v3.0
[   23.844107] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   23.844120]         <Adaptec 2940 Ultra SCSI adapter>
[   23.844129]         aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
[   23.844139] 
[   23.846225] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[   23.846247] PCI: setting IRQ 9 as level-triggered
[   23.846261] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[   23.846310] uhci_hcd 0000:00:07.2: UHCI Host Controller
[   23.846695] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[   23.846775] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000f800
[   23.847325] usb usb1: configuration #1 chosen from 1 choice
[   23.847521] hub 1-0:1.0: USB hub found
[   23.847579] hub 1-0:1.0: 2 ports detected
[   23.857017] scsi 0:0:0:0: Direct-Access     IBM      DCAS-32160W      S65A PQ: 0 ANSI: 2
[   23.857064] scsi0:A:0:0: Tagged Queuing enabled.  Depth 8
[   23.857132]  target0:0:0: Beginning Domain Validation
[   23.868037]  target0:0:0: wide asynchronous
[   23.868037]  target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[   23.868037]  target0:0:0: Domain Validation skipping write tests
[   23.868037]  target0:0:0: Ending Domain Validation
[   23.948781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[   23.948804] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   23.948821] usb usb1: Product: UHCI Host Controller
[   23.948836] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[   23.948850] usb usb1: SerialNumber: 0000:00:07.2
[   24.023809] Uniform Multi-Platform E-IDE driver
[   24.023837] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   24.028195] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:07.1
[   24.028251] PIIX4: not 100% native mode: will probe irqs later
[   24.028286]     ide0: BM-DMA at 0xfcf0-0xfcf7
[   24.028318]     ide1: BM-DMA at 0xfcf8-0xfcff
[   24.028340] Probing IDE interface ide0...
[   24.256093] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   24.316227] hda: Maxtor 2F040J0, ATA DISK drive
[   24.431227] usb 1-1: configuration #1 chosen from 1 choice
[   24.434673] usb 1-1: New USB device found, idVendor=413c, idProduct=2003
[   24.434697] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   24.434714] usb 1-1: Product: Dell USB Keyboard
[   24.434727] usb 1-1: Manufacturer: Dell
[   24.561217] usbcore: registered new interface driver hiddev
[   24.579451] input: Dell Dell USB Keyboard as /class/input/input1
[   24.580586] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:07.2-1
[   24.580698] usbcore: registered new interface driver usbhid
[   24.580722] usbhid: v2.6:USB HID core driver
[   24.922055] scsi 0:0:5:0: CD-ROM            NEC      CD-ROM DRIVE:465 1.13 PQ: 0 ANSI: 2
[   24.922055]  target0:0:5: Beginning Domain Validation
[   24.922055]  target0:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   24.922055]  target0:0:5: Domain Validation skipping write tests
[   24.922055]  target0:0:5: Ending Domain Validation
[   25.004287] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   25.004445] hda: UDMA/33 mode selected
[   25.004592] Probing IDE interface ide1...
[   25.572254] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   25.572448] ide1 at 0x170-0x177,0x376 on irq 15
[   25.691941] hda: max request size: 128KiB
[   25.705255] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63
[   25.705255] hda: cache flushes supported
[   25.705255]  hda: hda1 hda2
[   26.127388] md: raid1 personality registered for level 1
[   26.161521] md: md0 stopped.
[   26.174459] md: bind<hda1>
[   26.247617] raid1: raid set md0 active with 1 out of 2 mirrors
[   26.255895] md: md1 stopped.
[   26.278894] md: bind<hda2>
[   26.376253] raid1: raid set md1 active with 1 out of 2 mirrors
[   26.515503] PM: Starting manual resume from disk
[   26.684928] kjournald starting.  Commit interval 5 seconds
[   26.684992] EXT3-fs: mounted filesystem with ordered data mode.
[   29.729533] udevd version 125 started
[   31.329793] Driver 'sd' needs updating - please use bus_type methods
[   31.331410]  target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[   31.356342] sd 0:0:0:0: [sda] 4226725 512-byte hardware sectors (2164 MB)
[   31.387138] Driver 'sr' needs updating - please use bus_type methods
[   31.395930] sd 0:0:0:0: [sda] Write Protect is off
[   31.395957] sd 0:0:0:0: [sda] Mode Sense: b3 00 00 08
[   31.415261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.433501] sd 0:0:0:0: [sda] 4226725 512-byte hardware sectors (2164 MB)
[   31.471790] sd 0:0:0:0: [sda] Write Protect is off
[   31.471818] sd 0:0:0:0: [sda] Mode Sense: b3 00 00 08
[   31.492745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.492787]  sda: sda1 sda2 < sda5 >
[   31.525619] sd 0:0:0:0: [sda] Attached SCSI disk
[   31.530509] sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray
[   31.530531] Uniform CD-ROM driver Revision: 3.20
[   31.530953] sr 0:0:5:0: Attached scsi CD-ROM sr0
[   31.671144] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   31.671306] sr 0:0:5:0: Attached scsi generic sg1 type 5
[   34.188551] input: PC Speaker as /class/input/input2
[   37.000554] Linux agpgart interface v0.103
[   37.066775] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   37.302148] agpgart: Detected an Intel 440BX Chipset.
[   37.309197] agpgart: AGP aperture is 64M @ 0xf8000000
[   37.339084] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   37.364150] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[   37.405800] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[   37.774506] HiSax: Linux Driver for passive ISDN cards
[   37.774525] HiSax: Version 3.5 (module)
[   37.774539] HiSax: Layer1 Revision 2.46.2.5
[   37.774552] HiSax: Layer2 Revision 2.30.2.4
[   37.774565] HiSax: TeiMgr Revision 2.20.2.3
[   37.774577] HiSax: Layer3 Revision 2.22.2.3
[   37.774590] HiSax: LinkLayer Revision 2.59.2.4
[   37.948656] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
[   38.054458] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
[   38.054672] HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
[   38.054710] HiSax: DSS1 Rev. 2.32.2.3
[   38.054729] HiSax: 2 channels added
[   38.054742] HiSax: MAX_WAITING_CALLS added
[   38.055744] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   38.055764] PCI: setting IRQ 11 as level-triggered
[   38.055779] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   38.055807] hisax_fcpcipnp: found adapter Fritz!Card PCI at 0000:00:0c.0
[   38.874301] NET: Registered protocol family 23
[   41.089335] Error: Driver 'pcspkr' is already registered, aborting...
[   41.102479] input: Power Button (FF) as /class/input/input3
[   41.128832] ACPI: Power Button (FF) [PWRF]
[   42.185332] parport_pc 00:09: activated
[   42.185357] parport_pc 00:09: reported by Plug and Play ACPI
[   42.185405] parport0: PC-style at 0x278, irq 5 [PCSPP,EPP]
[   42.282141] parport_pc 00:0a: unable to assign resources
[   42.282242] parport_pc: probe of 00:0a failed with error -16
[   47.668606] Adding 987896k swap on /dev/md1.  Priority:-1 extents:1 across:987896k
[   48.392173] EXT3 FS on md0, internal journal
[   49.248212] loop: module loaded
[   51.907394] eth0:  setting half-duplex.
[  230.999974] NET: Registered protocol family 10
[  231.003030] lo: Disabled Privacy Extensions
[  241.568060] eth0: no IPv6 routers present
[  777.532032] kjournald starting.  Commit interval 5 seconds
[  777.532032] EXT3 FS on sda1, internal journal
[  777.532032] EXT3-fs: mounted filesystem with ordered data mode.
[  907.565182] isdn: Verbose-Level is 2
[  907.814746] ippp, open, slot: 0, minor: 0, state: 0000
[  907.814789] ippp_ccp: allocated reset data structure c60e4000
[ 1081.808059] OPEN: 169.255.255.169 -> 141.76.2.4 TCP, port: 54752 -> 80
[ 1081.808059] ippp0: dialing 1 0191011... 
[ 1088.000040] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1088.000073] isdn_tx_timeout dev ippp0 dialstate 4
[ 1088.000117] ------------[ cut here ]------------
[ 1088.000133] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x8f/0xdc()
[ 1088.000147] Modules linked in: ipv6 loop container parport_pc parport button snd_pcm snd_timer irtty_sir sir_dev snd soundcore snd_page_alloc irda hisax_fcpcipnp hisax_isac hisax crc_ccitt isdn i2c_piix4 shpchp intel_agp slhc i2c_core pci_hotplug agpgart psmouse pcspkr evdev sg sr_mod sd_mod cdrom ext3 jbd mbcache raid1 md_mod ide_disk ide_pci_generic usbhid hid ff_memless piix ide_core ata_generic uhci_hcd aic7xxx floppy libata scsi_transport_spi 3c59x mii usbcore scsi_mod dock thermal processor fan thermal_sys
[ 1088.000363] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1
[ 1088.000392]  [<c012256f>] warn_on_slowpath+0x40/0x66
[ 1088.000469]  [<c0134d68>] up+0x9/0x2a
[ 1088.000502]  [<c0122a10>] release_console_sem+0x173/0x18c
[ 1088.000611]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000637]  [<c0122ea7>] printk+0x14/0x18
[ 1088.000671]  [<c89df263>] isdn_net_tx_timeout+0x1d/0x4f [isdn]
[ 1088.000770]  [<c0266b31>] dev_watchdog+0x8f/0xdc
[ 1088.000805]  [<c0129658>] run_timer_softirq+0x11a/0x17c
[ 1088.000837]  [<c0266aa2>] dev_watchdog+0x0/0xdc
[ 1088.000885]  [<c0126579>] __do_softirq+0x66/0xd3
[ 1088.000917]  [<c012662b>] do_softirq+0x45/0x53
[ 1088.000940]  [<c01268e2>] irq_exit+0x35/0x67
[ 1088.000961]  [<c0105f3f>] do_IRQ+0x52/0x63
[ 1088.000994]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001024]  [<c01042a7>] common_interrupt+0x23/0x28
[ 1088.001047]  [<c0102656>] default_idle+0x0/0x53
[ 1088.001092]  [<c0114d54>] native_safe_halt+0x2/0x3
[ 1088.001139]  [<c0102683>] default_idle+0x2d/0x53
[ 1088.001161]  [<c01025ce>] cpu_idle+0xab/0xcb
[ 1088.001196]  =======================
[ 1088.001210] ---[ end trace ce97df7e538e590f ]---
[ 1088.808124] isdn: fcpcipnp0,ch0 cause: E001B
[ 1090.256049] isdn_net: local hangup ippp0
[ 1090.256085] ippp0: Chargesum is 0
[ 1128.000049] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1128.000082] isdn_tx_timeout dev ippp0 dialstate 0
[ 1128.000126] OPEN: 169.255.255.169 -> 141.76.2.4 TCP, port: 54752 -> 80
[ 1128.000167] ippp0: dialing 1 0191011... 
[ 1135.000130] isdn: fcpcipnp0,ch0 cause: E001B
[ 1136.452050] isdn_net: local hangup ippp0
[ 1136.452085] ippp0: Chargesum is 0
[ 1168.000051] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1168.000085] isdn_tx_timeout dev ippp0 dialstate 0
[ 1846.586912] ippp_ccp: freeing reset data structure c60e4000
[ 1846.908640] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1846.915499] __dev_addr_discard: address leakage! da_users=1
[ 1847.400487] isdn: Verbose-Level is 2
[ 1847.535466] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1847.635546] isdn: Verbose-Level is 2
[ 1847.899051] ippp, open, slot: 0, minor: 0, state: 0000
[ 1847.899095] ippp_ccp: allocated reset data structure c3a02000
[ 1847.902121] ippp, open, slot: 1, minor: 1, state: 0000
[ 1847.902160] ippp_ccp: allocated reset data structure c6606800
[ 1863.408522] ippp_ccp: freeing reset data structure c3a02000
[ 1863.411018] ippp_ccp: freeing reset data structure c6606800
[ 1863.555216] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1863.555252] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1863.562554] __dev_addr_discard: address leakage! da_users=1
[ 1863.899250] isdn: Verbose-Level is 2
[ 1864.001219] isdn_free_channel: called with invalid drv(-1) or channel(-1)
[ 1864.101886] isdn: Verbose-Level is 2
[ 1864.254885] ippp, open, slot: 0, minor: 0, state: 0000
[ 1864.254927] ippp_ccp: allocated reset data structure c3a02000
[ 1864.258057] ippp, open, slot: 1, minor: 1, state: 0000
[ 1864.258098] ippp_ccp: allocated reset data structure c6606800
[ 1967.417718] OPEN: 169.255.255.169 -> 213.9.73.106 UDP, port: 123 -> 123
[ 1967.417718] ippp0: dialing 1 0191011... 
[ 1974.416125] isdn: fcpcipnp0,ch0 cause: E001B
[ 1975.864050] isdn_net: local hangup ippp0
[ 1975.864086] ippp0: Chargesum is 0
[ 1984.000047] NETDEV WATCHDOG: ippp0: transmit timed out
[ 1984.000080] isdn_tx_timeout dev ippp0 dialstate 0

--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: