--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-686: vodafone k3520 a.k.a. huawei e169 umts 3g umts usb stick randomly disconnects and reconnects
- From: Alexander Heinz <option.bug@mailinator.com>
- Date: Thu, 04 Feb 2010 11:23:49 +0100
- Message-id: <20100204102349.5954.85357.reportbug@mucn1543.domain.invalid>
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
Hello!
I own 3 Vodafone K3520 UMTS 3G sticks which are also known as Huawei E169 as far as I know
Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Manufacturer: huawei
Model: K3520
Revision: 11.314.21.31.00
I have to face the problem that these devices (I have 3 of them) seem to randomly disconnect and reconnect. Sometimes it takes days for this to happen, sometimes less than an hour.
I have tested this with Linux (Debian unstable/sid, kernel 2.6.32-5), but I can also reproduce this with other kernel versions
The steps to reproduce this are fairly easy:
- boot a recent kernel
- deactivate the PIN of your SIM
- insert the SIM into the USB stick (tried SIMs of several operators with the same effect)
- connect it to your USB port
- check the dmesg output from time to time and wait till the problem occurs (no need to establish a connection)
The interesting part of the log at the end of this post seems to be:
[227101.066954] option: option_instat_callback: error -84
[227101.149935] option: option_instat_callback: error -108
As far as I can tell (I do not know for sure), this seems to trigger the reconnect.
I have tested this with 3 different UMTS/3G sticks on 4 different PCs in different scenarios (the stick was always the only device connected to USB, I have also tried to put a USB hub with an external power supply in between, tried both, PCs with USB 1.1 and USB 2.0).
Best regards,
Alex
Here is the full log of such a disconnect/reconnect cycle (output of dmesg)
[171258.664103] usb 1-1: new full speed USB device using uhci_hcd and address 4
[171258.824201] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[171258.824211] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[171258.824220] usb 1-1: Product: HUAWEI Mobile
[171258.824227] usb 1-1: Manufacturer: ������������������������������������������������������������������������������������������������������������������
[171258.824235] usb 1-1: SerialNumber: ������������������������������������������������������������������������������������������������������������������
[171258.827367] usb 1-1: configuration #1 chosen from 1 choice
[171258.836035] scsi2 : SCSI emulation for USB Mass Storage devices
[171258.837255] usb-storage: device found at 4
[171258.837262] usb-storage: waiting for device to settle before scanning
[171259.048129] usb 1-1: USB disconnect, address 4
[171259.288099] usb 1-1: new full speed USB device using uhci_hcd and address 5
[171259.454093] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[171259.454102] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[171259.454111] usb 1-1: Product: HUAWEI Mobile
[171259.454118] usb 1-1: Manufacturer: ������������������������������������������������������������������������������������������������������������������
[171259.454126] usb 1-1: SerialNumber: ������������������������������������������������������������������������������������������������������������������
[171259.456962] usb 1-1: configuration #1 chosen from 1 choice
[171259.474131] scsi6 : SCSI emulation for USB Mass Storage devices
[171259.485358] usb-storage: device found at 5
[171259.485368] usb-storage: waiting for device to settle before scanning
[171259.612724] usbcore: registered new interface driver usbserial
[171259.613344] USB Serial support registered for generic
[171259.613960] usbcore: registered new interface driver usbserial_generic
[171259.613970] usbserial: USB Serial Driver core
[171259.662107] USB Serial support registered for GSM modem (1-port)
[171259.663024] option 1-1:1.0: GSM modem (1-port) converter detected
[171259.664041] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[171259.665362] option 1-1:1.1: GSM modem (1-port) converter detected
[171259.668035] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[171259.668035] option 1-1:1.2: GSM modem (1-port) converter detected
[171259.670784] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[171259.677757] usbcore: registered new interface driver option
[171259.677773] option: v0.7.2:USB Driver for GSM modems
[171264.485450] usb-storage: device scan complete
[171264.488692] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[171264.491306] scsi 6:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[171264.514330] sd 6:0:0:1: [sda] Attached SCSI removable disk
[171264.632287] sr0: scsi-1 drive
[171264.632316] Uniform CD-ROM driver Revision: 3.20
[171264.634397] sr 6:0:0:0: Attached scsi CD-ROM sr0
[171264.709875] sr 6:0:0:0: Attached scsi generic sg0 type 5
[171264.714185] sd 6:0:0:1: Attached scsi generic sg1 type 0
[171274.796576] ISO 9660 Extensions: Microsoft Joliet Level 3
[171274.801568] ISOFS: changing to secondary root
[227101.066954] option: option_instat_callback: error -84
[227101.149935] option: option_instat_callback: error -108
[227101.150295] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[227101.150356] option 1-1:1.0: device disconnected
[227101.150533] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[227101.150581] option 1-1:1.1: device disconnected
[227101.150748] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[227101.150802] option 1-1:1.2: device disconnected
[227101.204234] usb 1-1: USB disconnect, address 5
[227101.252033] scsi 6:0:0:0: rejecting I/O to dead device
[227107.216094] usb 1-1: new full speed USB device using uhci_hcd and address 6
[227107.377195] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[227107.377208] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[227107.377217] usb 1-1: Product: HUAWEI Mobile
[227107.377224] usb 1-1: Manufacturer: ������������������������������������������������������������������������������������������������������������������
[227107.377231] usb 1-1: SerialNumber: ������������������������������������������������������������������������������������������������������������������
[227107.380144] usb 1-1: configuration #1 chosen from 1 choice
[227107.387510] option 1-1:1.0: GSM modem (1-port) converter detected
[227107.387914] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[227107.390759] option 1-1:1.1: GSM modem (1-port) converter detected
[227107.391115] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[227107.396036] option 1-1:1.2: GSM modem (1-port) converter detected
[227107.396036] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[227107.396792] scsi10 : SCSI emulation for USB Mass Storage devices
[227107.408036] usb-storage: device found at 6
[227107.408036] usb-storage: waiting for device to settle before scanning
[227112.406121] usb-storage: device scan complete
[227112.409525] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[227112.412425] scsi 10:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[227112.438365] sr0: scsi-1 drive
[227112.438781] sr 10:0:0:0: Attached scsi CD-ROM sr0
[227112.439032] sr 10:0:0:0: Attached scsi generic sg0 type 5
[227112.444230] sd 10:0:0:1: Attached scsi generic sg1 type 0
[227112.470177] sd 10:0:0:1: [sda] Attached SCSI removable disk
[235490.509670] option: option_instat_callback: error -84
[235490.552179] usb 1-1: USB disconnect, address 6
[235490.553627] option: option_instat_callback: error -108
[235490.557502] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[235490.557782] option 1-1:1.0: device disconnected
[235490.564042] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[235490.564042] option 1-1:1.1: device disconnected
[235490.570755] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[235490.571536] option 1-1:1.2: device disconnected
[235497.028095] usb 1-1: new full speed USB device using uhci_hcd and address 7
[235497.189201] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[235497.189215] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[235497.189224] usb 1-1: Product: HUAWEI Mobile
[235497.189231] usb 1-1: Manufacturer: ������������������������������������������������������������������������������������������������������������������
[235497.189239] usb 1-1: SerialNumber: ������������������������������������������������������������������������������������������������������������������
[235497.192336] usb 1-1: configuration #1 chosen from 1 choice
[235497.198699] option 1-1:1.0: GSM modem (1-port) converter detected
[235497.199212] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[235497.201789] option 1-1:1.1: GSM modem (1-port) converter detected
[235497.202152] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[235497.205754] option 1-1:1.2: GSM modem (1-port) converter detected
[235497.206196] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[235497.211917] scsi14 : SCSI emulation for USB Mass Storage devices
[235497.248179] usb-storage: device found at 7
[235497.248189] usb-storage: waiting for device to settle before scanning
[235502.249544] usb-storage: device scan complete
[235502.253023] scsi 14:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[235502.255406] scsi 14:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[235502.282376] sr0: scsi-1 drive
[235502.282865] sr 14:0:0:0: Attached scsi CD-ROM sr0
[235502.283152] sr 14:0:0:0: Attached scsi generic sg0 type 5
[235502.288127] sd 14:0:0:1: Attached scsi generic sg1 type 0
[235502.315549] sd 14:0:0:1: [sda] Attached SCSI removable disk
# lsusb -v
Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1 Huawei Technologies Co., Ltd.
idProduct 0x1001 E620 USB Modem
bcdDevice 0.00
iManufacturer 1 ���������������������������������������������������������
iProduct 2 HUAWEI Mobile
iSerial 1 ���������������������������������������������������������
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=ea824df0-7299-441b-ba19-82e6154377d7 ro vga=791 i915.modeset=0
** Not tainted
** Kernel log:
[171259.454111] usb 1-1: Product: HUAWEI Mobile
[171259.454118] usb 1-1: Manufacturer: ��������������������������������������
[171259.454126] usb 1-1: SerialNumber: ��������������������������������������
[171259.456962] usb 1-1: configuration #1 chosen from 1 choice
[171259.474131] scsi6 : SCSI emulation for USB Mass Storage devices
[171259.485358] usb-storage: device found at 5
[171259.485368] usb-storage: waiting for device to settle before scanning
[171259.612724] usbcore: registered new interface driver usbserial
[171259.613344] USB Serial support registered for generic
[171259.613960] usbcore: registered new interface driver usbserial_generic
[171259.613970] usbserial: USB Serial Driver core
[171259.662107] USB Serial support registered for GSM modem (1-port)
[171259.663024] option 1-1:1.0: GSM modem (1-port) converter detected
[171259.664041] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[171259.665362] option 1-1:1.1: GSM modem (1-port) converter detected
[171259.668035] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[171259.668035] option 1-1:1.2: GSM modem (1-port) converter detected
[171259.670784] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[171259.677757] usbcore: registered new interface driver option
[171259.677773] option: v0.7.2:USB Driver for GSM modems
[171264.485450] usb-storage: device scan complete
[171264.488692] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[171264.491306] scsi 6:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[171264.514330] sd 6:0:0:1: [sda] Attached SCSI removable disk
[171264.632287] sr0: scsi-1 drive
[171264.632316] Uniform CD-ROM driver Revision: 3.20
[171264.634397] sr 6:0:0:0: Attached scsi CD-ROM sr0
[171264.709875] sr 6:0:0:0: Attached scsi generic sg0 type 5
[171264.714185] sd 6:0:0:1: Attached scsi generic sg1 type 0
[171274.796576] ISO 9660 Extensions: Microsoft Joliet Level 3
[171274.801568] ISOFS: changing to secondary root
[180172.912467] ath5k phy0: noise floor calibration timeout (2437MHz)
[227101.066954] option: option_instat_callback: error -84
[227101.149935] option: option_instat_callback: error -108
[227101.150295] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[227101.150356] option 1-1:1.0: device disconnected
[227101.150533] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[227101.150581] option 1-1:1.1: device disconnected
[227101.150748] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[227101.150802] option 1-1:1.2: device disconnected
[227101.204234] usb 1-1: USB disconnect, address 5
[227101.252033] scsi 6:0:0:0: rejecting I/O to dead device
[227107.216094] usb 1-1: new full speed USB device using uhci_hcd and address 6
[227107.377195] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[227107.377208] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[227107.377217] usb 1-1: Product: HUAWEI Mobile
[227107.377224] usb 1-1: Manufacturer: ��������������������������������������
[227107.377231] usb 1-1: SerialNumber: ��������������������������������������
[227107.380144] usb 1-1: configuration #1 chosen from 1 choice
[227107.387510] option 1-1:1.0: GSM modem (1-port) converter detected
[227107.387914] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[227107.390759] option 1-1:1.1: GSM modem (1-port) converter detected
[227107.391115] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[227107.396036] option 1-1:1.2: GSM modem (1-port) converter detected
[227107.396036] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[227107.396792] scsi10 : SCSI emulation for USB Mass Storage devices
[227107.408036] usb-storage: device found at 6
[227107.408036] usb-storage: waiting for device to settle before scanning
[227112.406121] usb-storage: device scan complete
[227112.409525] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[227112.412425] scsi 10:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[227112.438365] sr0: scsi-1 drive
[227112.438781] sr 10:0:0:0: Attached scsi CD-ROM sr0
[227112.439032] sr 10:0:0:0: Attached scsi generic sg0 type 5
[227112.444230] sd 10:0:0:1: Attached scsi generic sg1 type 0
[227112.470177] sd 10:0:0:1: [sda] Attached SCSI removable disk
[235490.509670] option: option_instat_callback: error -84
[235490.552179] usb 1-1: USB disconnect, address 6
[235490.553627] option: option_instat_callback: error -108
[235490.557502] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[235490.557782] option 1-1:1.0: device disconnected
[235490.564042] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[235490.564042] option 1-1:1.1: device disconnected
[235490.570755] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[235490.571536] option 1-1:1.2: device disconnected
[235497.028095] usb 1-1: new full speed USB device using uhci_hcd and address 7
[235497.189201] usb 1-1: New USB device found, idVendor=12d1, idProduct=1001
[235497.189215] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[235497.189224] usb 1-1: Product: HUAWEI Mobile
[235497.189231] usb 1-1: Manufacturer: ��������������������������������������
[235497.189239] usb 1-1: SerialNumber: ��������������������������������������
[235497.192336] usb 1-1: configuration #1 chosen from 1 choice
[235497.198699] option 1-1:1.0: GSM modem (1-port) converter detected
[235497.199212] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[235497.201789] option 1-1:1.1: GSM modem (1-port) converter detected
[235497.202152] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[235497.205754] option 1-1:1.2: GSM modem (1-port) converter detected
[235497.206196] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[235497.211917] scsi14 : SCSI emulation for USB Mass Storage devices
[235497.248179] usb-storage: device found at 7
[235497.248189] usb-storage: waiting for device to settle before scanning
[235502.249544] usb-storage: device scan complete
[235502.253023] scsi 14:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[235502.255406] scsi 14:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[235502.282376] sr0: scsi-1 drive
[235502.282865] sr 14:0:0:0: Attached scsi CD-ROM sr0
[235502.283152] sr 14:0:0:0: Attached scsi generic sg0 type 5
[235502.288127] sd 14:0:0:1: Attached scsi generic sg1 type 0
[235502.315549] sd 14:0:0:1: [sda] Attached SCSI removable disk
[236392.904586] ath5k phy0: noise floor calibration timeout (2437MHz)
** Model information
not available
** Loaded modules:
Module Size Used by
isofs 24608 0
sg 15932 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
option 13179 1
usbserial 21771 3 option
nls_cp437 4489 0
vfat 6506 0
fat 34776 1 vfat
sd_mod 25717 0
crc_t10dif 1012 1 sd_mod
usb_storage 29825 0
nls_utf8 908 0
ntfs 163169 0
i915 217023 1
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
i2c_core 12612 3 i915,drm,i2c_algo_bit
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 0
l2cap 21677 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36259 6 sco,bnep,rfcomm,l2cap
speedstep_ich 1729 0
speedstep_lib 2468 1 speedstep_ich
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_userspace 1444 0
cpufreq_conservative 4018 0
binfmt_misc 4875 1
fuse 43554 1
loop 9721 0
arc4 974 2
ecb 1405 2
ath5k 103718 0
mac80211 121381 1 ath5k
ath 5982 1 ath5k
cfg80211 86910 3 ath5k,mac80211,ath
pcmcia 17442 0
snd_intel8x0 19523 0
snd_intel8x0m 8100 0
rfkill 10196 4 bluetooth,cfg80211
snd_ac97_codec 79136 2 snd_intel8x0,snd_intel8x0m
ac97_bus 710 1 snd_ac97_codec
yenta_socket 16403 1
snd_pcsp 5219 0
led_class 1757 1 ath5k
snd_pcm_oss 28479 0
rsrc_nonstatic 7057 1 yenta_socket
joydev 6771 0
pcmcia_core 20406 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47350 5 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcsp,snd_pcm_oss
shpchp 21220 0
dcdbas 3860 0
snd_timer 12258 1 snd_pcm
pci_hotplug 18065 1 shpchp
rng_core 2178 0
psmouse 44409 0
snd 33551 8 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcsp,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 3450 1 snd
irda 75888 0
crc_ccitt 1039 1 irda
snd_page_alloc 4977 3 snd_intel8x0,snd_intel8x0m,snd_pcm
battery 3782 0
ac 1640 0
processor 25803 1
serio_raw 2916 0
evdev 5609 20
ext3 93828 1
jbd 31965 1 ext3
mbcache 3762 1 ext3
ide_gd_mod 17103 3
ata_generic 2015 0
libata 113728 1 ata_generic
scsi_mod 101073 5 sg,sr_mod,sd_mod,usb_storage,libata
ide_pci_generic 1924 0
uhci_hcd 15953 0
ehci_hcd 27230 0
3c59x 24425 0
piix 3564 2
intel_agp 20145 1
usbcore 97930 6 option,usbserial,usb_storage,uhci_hcd,ehci_hcd
mii 2714 1 3c59x
floppy 40923 0
video 14605 1 i915
ide_core 63850 3 ide_gd_mod,ide_pci_generic,piix
nls_base 4541 7 isofs,nls_cp437,vfat,fat,nls_utf8,ntfs,usbcore
agpgart 19516 3 drm,intel_agp
output 1204 1 video
button 3598 1 i915
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:08:74:22:e5:b1 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.103/24 brd 192.168.2.255 scope global eth0
inet6 fe80::208:74ff:fe22:e5b1/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:1d:19:24:98:c5 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 02:93:16:56:ea:65 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1640 24 0 0 0 0 0 0 1640 24 0 0 0 0 0 0
eth0:18670856 113950 0 0 0 0 0 0 2735261 18006 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
25574 total packets received
0 forwarded
0 incoming packets discarded
20174 incoming packets delivered
17609 requests sent out
Icmp:
13 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10
echo requests: 1
echo replies: 2
14 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 11
echo request: 2
echo replies: 1
IcmpMsg:
InType0: 2
InType3: 10
InType8: 1
OutType0: 1
OutType3: 11
OutType8: 2
Tcp:
837 active connections openings
0 passive connection openings
8 failed connection attempts
40 connection resets received
0 connections established
13335 segments received
13261 segments send out
551 segments retransmited
0 bad segments received.
92 resets sent
Udp:
2160 packets received
11 packets to unknown port received.
0 packet receive errors
2006 packets sent
UdpLite:
TcpExt:
127 TCP sockets finished time wait in fast timer
670 delayed acks sent
Quick ack mode was activated 110 times
8411 packet headers predicted
1458 acknowledgments not containing data payload received
405 predicted acknowledgments
9 congestion windows recovered without slow start after partial ack
1 retransmits in slow start
126 other TCP timeouts
101 DSACKs sent for old packets
43 DSACKs received
23 connections reset due to unexpected data
22 connections reset due to early user close
77 connections aborted due to timeout
TCPDSACKIgnoredOld: 1
TCPDSACKIgnoredNoUndo: 20
IpExt:
InMcastPkts: 4883
OutMcastPkts: 1867
InBcastPkts: 34
InOctets: 13011615
OutOctets: 2436496
InMcastOctets: 191554
OutMcastOctets: 79087
InBcastOctets: 12023
*** Device features:
eth0: 0x803
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host Bridge [8086:3575] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information: Len=05 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82830 CGC [Chipset Graphics Controller] [8086:3577] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:00c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at f4f80000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller [0380]: Intel Corporation 82830 CGC [Chipset Graphics Controller] [8086:3577]
Subsystem: Dell Device [1028:00c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2750ns max)
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at f4f00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Latitude C640 [8086:4541]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=10, sec-latency=32
I/O behind bridge: 0000e000-0000ffff
Memory behind bridge: f6000000-fdffffff
Prefetchable memory behind bridge: 20000000-25ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Latitude C640 [8086:4541]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Region 5: Memory at 26000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
Subsystem: Cirrus Logic Crystal WMD Audio Codec [1013:5959]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc80 [size=64]
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem Controller [8086:2486] (rev 02) (prog-if 00 [Generic])
Subsystem: PCTel Inc Dell Inspiron 2100 internal modem [134d:4c21]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at dc00 [size=128]
Kernel driver in use: Intel ICH Modem
02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
Subsystem: Dell Device [1028:00c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec80 [size=128]
Region 1: Memory at fafffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 24000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: 3c59x
02:01.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02)
Subsystem: Dell Device [1028:00c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000e000-0000e0ff
I/O window 1: 0000e400-0000e4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:03.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)
Subsystem: Accton Technology Corporation Device [1113:4413]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fafe0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ath5k
** USB devices:
Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=en_EN.UTF-8, LC_CTYPE=en_EN.UTF-8 (charmap=locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
ii libc6-i686 2.10.2-5 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_US:en",
LC_ALL = (unset),
LANG = "en_EN.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
--- End Message ---