--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-686: ACPI I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
- From: Ferry Toth <ftoth@tiscali.nl>
- Date: Sat, 23 Jan 2010 23:36:34 +0100
- Message-id: <20100123223634.6217.45576.reportbug@localhost.localdomain>
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
kernel.log shows:
2010-01-23 22:25:37 system 00 8: ioport range 0x290-0x297 has been reserved
2010-01-23 22:25:47 w83627ehf Found W83627DHG chip at 0x290
2010-01-23 22:25:47 ACPI I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
2010-01-23 22:25:47 ACPI If an ACPI driver is available for this device, you should use it instead of the native driver
modprobing w83627ehf generates the same messages.
Ferry
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/delfion-linux ro quiet
** Not tainted
** Kernel log:
[ 3.603677] usb 3-2: New USB device found, idVendor=04b8, idProduct=080f
[ 3.603681] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.603684] usb 3-2: Product: USB MFP
[ 3.603686] usb 3-2: Manufacturer: EPSON
[ 3.603688] usb 3-2: SerialNumber: L86040504152023070
[ 3.603753] usb 3-2: configuration #1 chosen from 1 choice
[ 5.366496] udev: starting version 150
[ 6.014472] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.014578] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.016492] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.056459] ACPI: SSDT 7f7ae0c0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 6.056894] processor LNXCPU:00: registered as cooling_device0
[ 6.057149] ACPI: SSDT 7f7ae2a0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 6.057574] processor LNXCPU:01: registered as cooling_device1
[ 6.068424] intel_rng: FWH not detected
[ 6.143399] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 6.781793] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 6.781795] Copyright (c) 2007 Atheros Corporation.
[ 6.781824] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.781833] atl2 0000:02:00.0: setting latency timer to 64
[ 6.880776] usbcore: registered new interface driver hiddev
[ 6.894644] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[ 6.894743] generic-usb 0003:046D:C040.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 6.894759] usbcore: registered new interface driver usbhid
[ 6.894761] usbhid: v2.6:USB HID core driver
[ 7.260331] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7.260353] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.349634] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 7.861809] Initializing USB Mass Storage driver...
[ 7.861878] scsi2 : SCSI emulation for USB Mass Storage devices
[ 7.861937] usbcore: registered new interface driver usb-storage
[ 7.861939] USB Mass Storage support registered.
[ 7.862021] usb-storage: device found at 3
[ 7.862022] usb-storage: waiting for device to settle before scanning
[ 7.964556] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4717
[ 7.983334] usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x080F
[ 7.983351] usbcore: registered new interface driver usblp
[ 9.890183] EXT3 FS on dm-0, internal journal
[ 10.063294] loop: module loaded
[ 10.079222] w83627ehf: Found W83627DHG chip at 0x290
[ 10.079279] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
[ 10.079326] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.581870] kjournald starting. Commit interval 5 seconds
[ 10.581991] EXT3 FS on sda2, internal journal
[ 10.581995] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.612113] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 10.763858] Adding 4718584k swap on /dev/mapper/delfion-swap. Priority:-1 extents:1 across:4718584k
[ 12.195483] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 12.195594] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 12.195678] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.195829] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.861887] usb-storage: device scan complete
[ 12.864894] scsi 2:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 12.865303] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 12.875874] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.825313] fuse init (API version 7.13)
[ 20.626886] NET: Registered protocol family 23
[ 33.222229] Bluetooth: Core ver 2.15
[ 33.222254] NET: Registered protocol family 31
[ 33.222256] Bluetooth: HCI device and connection manager initialized
[ 33.222258] Bluetooth: HCI socket layer initialized
[ 33.296811] Bluetooth: L2CAP ver 2.14
[ 33.296813] Bluetooth: L2CAP socket layer initialized
[ 33.301160] Bluetooth: RFCOMM TTY layer initialized
[ 33.301164] Bluetooth: RFCOMM socket layer initialized
[ 33.301166] Bluetooth: RFCOMM ver 1.11
[ 33.377807] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.377810] Bluetooth: BNEP filters: protocol multicast
[ 33.436593] Bridge firewalling registered
[ 33.629879] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.629882] Bluetooth: SCO socket layer initialized
[ 36.147287] lp0: using parport0 (interrupt-driven).
[ 36.168063] ppdev: user-space parallel port driver
[ 40.950466] [drm] Initialized drm 1.1.0 20060810
[ 41.136392] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 41.136396] pci 0000:00:02.0: setting latency timer to 64
[ 41.142232] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 46.891466] lo: Disabled Privacy Extensions
[ 47.865060] RPC: Registered udp transport module.
[ 47.865062] RPC: Registered tcp transport module.
[ 47.865064] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.004929] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 48.234724] svc: failed to register lockdv1 RPC service (errno 97).
[ 48.235320] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 48.256969] NFSD: starting 90-second grace period
[ 82.334620] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 82.494133] CPU0 attaching NULL sched-domain.
[ 82.494136] CPU1 attaching NULL sched-domain.
[ 82.516061] CPU0 attaching sched-domain:
[ 82.516064] domain 0: span 0-1 level MC
[ 82.516067] groups: 0 1
[ 82.516072] CPU1 attaching sched-domain:
[ 82.516075] domain 0: span 0-1 level MC
[ 82.516078] groups: 1 0
[ 301.691306] tun: Universal TUN/TAP device driver, 1.6
[ 301.691309] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 301.691790] tun0: Disabled Privacy Extensions
[ 3438.475575] w83627ehf: Found W83627DHG chip at 0x290
[ 3438.475603] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
[ 3438.475606] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
** Model information
not available
** Loaded modules:
Module Size Used by
tun 8728 2
nfsd 192383 11
lockd 49301 1 nfsd
nfs_acl 1695 1 nfsd
auth_rpcgss 25068 1 nfsd
sunrpc 134156 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 2586 1 nfsd
i915 217023 1
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
video 14605 1 i915
output 1204 1 video
ppdev 4058 0
lp 5570 0
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 0
l2cap 21677 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36259 6 sco,bnep,rfcomm,l2cap
rfkill 10196 2 bluetooth
kvm_intel 32446 0
kvm 179533 1 kvm_intel
acpi_cpufreq 4907 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_userspace 1444 0
litelink_sir 955 1
irtty_sir 2553 2
sir_dev 6933 2 litelink_sir,irtty_sir
irda 75888 2 litelink_sir,sir_dev
crc_ccitt 1039 1 irda
binfmt_misc 4875 1
fuse 43554 1
nls_utf8 908 1
nls_cp437 4489 1
vfat 6506 1
fat 34776 1 vfat
coretemp 3225 0
hwmon_vid 1528 0
loop 9721 0
usblp 7863 0
usb_storage 29825 1
snd_hda_codec_realtek 162851 1
snd_hda_intel 15263 2
snd_hda_codec 45998 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47350 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3480 0
snd_rawmidi 12313 1 snd_seq_midi
usbhid 26784 0
hid 50545 1 usbhid
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35303 3 snd_seq_midi,snd_seq_midi_event
atl2 17844 0
snd_timer 12258 2 snd_pcm,snd_seq
asus_atk0110 6782 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 33551 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
i2c_i801 6442 0
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
i2c_core 12612 4 i915,drm,i2c_algo_bit,i2c_i801
rng_core 2178 0
processor 25803 1 acpi_cpufreq
pcspkr 1207 0
evdev 5609 10
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
ext3 93828 2
jbd 31965 1 ext3
mbcache 3762 1 ext3
dm_mod 45854 6
sg 15932 0
sr_mod 10770 1
cdrom 26487 1 sr_mod
sd_mod 25717 5
crc_t10dif 1012 1 sd_mod
ide_pci_generic 1924 0
ata_generic 2015 0
ata_piix 16513 4
uhci_hcd 15953 0
libata 113728 2 ata_generic,ata_piix
intel_agp 20145 1
floppy 40923 0
agpgart 19516 3 drm,intel_agp
button 3598 1 i915
ehci_hcd 27230 0
scsi_mod 101073 5 usb_storage,sg,sr_mod,sd_mod,libata
piix 3564 0
ide_core 63850 2 ide_pci_generic,piix
usbcore 97930 6 usblp,usb_storage,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 8800 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfe80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8290]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfef8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dff00000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 9400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at a000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at dffc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
** USB devices:
Bus 003 Device 003: ID 04b8:080f Seiko Epson Corp. Stylus Photo RX425 scanner
Bus 003 Device 002: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 03f0:4717 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=nl_NL.UTF-8, LC_CTYPE=nl_NL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
--- End Message ---