--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-amd64: With kms enabled virtual console stays blank during bootup.
- From: Mariusz Zielinski <levi@levi.pl>
- Date: Sun, 17 Jan 2010 22:29:08 +0100
- Message-id: <20100117212908.11404.75547.reportbug@13G7L4J.ge>
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
Enabling kms on this machine breaks virtual consoles. During boot it stays blank until xserver is started. Later when I try to switch to virtual console screen freezes
until I switch back to xserver session.
[ 0.689165] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004980000, using 1216k, total 1216k
[ 0.689167] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.689169] vesafb: scrolling: redraw
[ 0.689171] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.689200] fb0: VESA VGA frame buffer device
[ 0.773079] Linux agpgart interface v0.103
[ 0.774731] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.775564] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.778508] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.792160] [drm] Initialized drm 1.1.0 20060810
[ 0.810322] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.810326] i915 0000:00:02.0: setting latency timer to 64
[ 0.816061] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 0.816064] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 0.816156] alloc irq_desc for 27 on node -1
[ 0.816158] alloc kstat_irqs on node -1
[ 0.816168] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 0.816173] [drm] set up 31M of stolen space
[ 1.478617] [drm] TV-25: set mode NTSC 480i 0
[ 1.622942] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.623053] fb0: inteldrmfb frame buffer device
[ 1.623054] registered panic notifier
[ 1.657807] acpi device:3d: registered as cooling_device0
[ 1.658423] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[ 1.658429] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 1.658472] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[ 1.658529] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input6
[ 1.658533] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 1.658547] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
I suspect that it may have something to do with vesafb. I was unable disable loading vesafb - must becompiled in. Xserver works fine including 3D acceleration.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/rootvg-root ro quiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/rootvg-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d04d400 (usable)
[ 0.000000] BIOS-e820: 000000007d04d400 - 000000007d04f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d04f400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7d04d max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 07DC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000007dc00000 - 0000000080000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007d04d000
[ 0.000000] 0000000000 - 007d000000 page 2M
[ 0.000000] 007d000000 - 007d04d000 page 4k
[ 0.000000] kernel direct mapping tables up to 7d04d000 @ 8000-c000
[ 0.000000] RAMDISK: 37667000 - 37fef5b9
[ 0.000000] ACPI: RSDP 00000000000fb9c0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 000000007d051e00 0006C (v01 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: FACP 000000007d051c9c 000F4 (v04 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: DSDT 000000007d052400 06E14 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 000000007d060c00 00040
[ 0.000000] ACPI: HPET 000000007d051f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: DMAR 000000007d060400 000F8 (v01 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: APIC 000000007d052000 00068 (v01 DELL M09 27D90A1E ASL 00000047)
[ 0.000000] ACPI: ASF! 000000007d051c00 0006A (v32 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: MCFG 000000007d051fc0 0003E (v16 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: TCPA 000000007d052300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC 000000007d05209c 00176 (v01 DELL M09 27D90A1E ASL 00000061)
[ 0.000000] ACPI: SSDT 000000007d05032d 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007d04d000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007d04d000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000021a0f] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007d04d000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000165d9d4] TEXT DATA BSS ==> [0001000000 - 000165d9d4]
[ 0.000000] #3 [0037667000 - 0037fef5b9] RAMDISK ==> [0037667000 - 0037fef5b9]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [000165e000 - 000165e1e8] BRK ==> [000165e000 - 000165e1e8]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007d04d
[ 0.000000] On node 0 totalpages: 511980
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6946 pages used for memmap
[ 0.000000] DMA32 zone: 501035 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u1048576
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 504876
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/rootvg-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2002396k/2048308k available (2981k kernel code, 388k absent, 45524k reserved, 1843k data, 576k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.117 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.23 BogoMIPS (lpj=10108468)
[ 0.004023] Security Framework initialized
[ 0.004028] SELinux: Disabled at boot.
[ 0.004174] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005198] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005659] Mount-cache hash table entries: 256
[ 0.005792] Initializing cgroup subsys ns
[ 0.005797] Initializing cgroup subsys cpuacct
[ 0.005800] Initializing cgroup subsys devices
[ 0.005802] Initializing cgroup subsys freezer
[ 0.005804] Initializing cgroup subsys net_cls
[ 0.005824] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005826] CPU: L2 cache: 3072K
[ 0.005829] CPU 0/0x0 -> Node 0
[ 0.005831] CPU: Physical Processor ID: 0
[ 0.005833] CPU: Processor Core ID: 0
[ 0.005835] mce: CPU supports 6 MCE banks
[ 0.005842] CPU0: Thermal monitoring enabled (TM2)
[ 0.005846] using mwait in idle threads.
[ 0.005848] Performance Events: Core2 events, Intel PMU driver.
[ 0.005853] ... version: 2
[ 0.005854] ... bit width: 40
[ 0.005855] ... generic registers: 2
[ 0.005857] ... value mask: 000000ffffffffff
[ 0.005858] ... max period: 000000007fffffff
[ 0.005859] ... fixed-purpose events: 3
[ 0.005861] ... event mask: 0000000700000003
[ 0.006782] ACPI: Core revision 20090903
[ 0.020072] DMAR: Host address width 36
[ 0.020075] DMAR: DRHD base: 0x000000fed10000 flags: 0x0
[ 0.020080] IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020082] DMAR: DRHD base: 0x000000fed11000 flags: 0x0
[ 0.020087] IOMMU fed11000: ver 1:0 cap c0000020630260 ecap 1000
[ 0.020089] DMAR: DRHD base: 0x000000fed13000 flags: 0x1
[ 0.020093] IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000
[ 0.020095] DMAR: RMRR base: 0x0000007d7e7000 end: 0x0000007d7fffff
[ 0.020098] DMAR: RMRR base: 0x0000007dc00000 end: 0x0000007fffffff
[ 0.020100] DMAR: No ATSR found
[ 0.020109] Setting APIC routing to flat
[ 0.020454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063803] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=10107935)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.152069] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.152076] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156014] Brought up 2 CPUs
[ 0.156016] Total of 2 processors activated (10108.20 BogoMIPS).
[ 0.156557] CPU0 attaching sched-domain:
[ 0.156560] domain 0: span 0-1 level MC
[ 0.156562] groups: 0 1
[ 0.156567] CPU1 attaching sched-domain:
[ 0.156569] domain 0: span 0-1 level MC
[ 0.156570] groups: 1 0
[ 0.156697] devtmpfs: initialized
[ 0.159878] regulator: core version 0.5
[ 0.160006] NET: Registered protocol family 16
[ 0.160085] ACPI: bus type pci registered
[ 0.160141] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.160143] PCI: MCFG area at f8000000 reserved in E820
[ 0.161136] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.161137] PCI: Using configuration type 1 for base access
[ 0.161474] bio: create slab <bio-0> at 0
[ 0.162120] ACPI: EC: Look up EC in DSDT
[ 0.162332] ACPI: BIOS _OSI(Linux) query ignored
[ 0.228167] ACPI: Interpreter enabled
[ 0.228170] ACPI: (supports S0 S3 S4 S5)
[ 0.228187] ACPI: Using IOAPIC for interrupt routing
[ 0.343571] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.343677] ACPI Warning: Incorrect checksum in table [TCPA] - 58, should be FC (20090903/tbutils-314)
[ 0.352106] ACPI: No dock devices found.
[ 0.372184] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.372233] DMAR: Forcing write-buffer flush capability
[ 0.372261] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.372266] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.372270] pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
[ 0.372300] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.372403] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
[ 0.372411] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
[ 0.372418] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.372470] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.372474] pci 0000:00:19.0: PME# disabled
[ 0.372536] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.372621] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.372706] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.372792] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.372854] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.372859] pci 0000:00:1a.7: PME# disabled
[ 0.372912] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
[ 0.372968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.372972] pci 0000:00:1b.0: PME# disabled
[ 0.373057] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.373061] pci 0000:00:1c.0: PME# disabled
[ 0.373148] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.373152] pci 0000:00:1c.1: PME# disabled
[ 0.373239] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.373243] pci 0000:00:1c.2: PME# disabled
[ 0.373316] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.373401] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.373487] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.373574] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.373635] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.373640] pci 0000:00:1d.7: PME# disabled
[ 0.373882] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.373889] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.373896] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.373903] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.373910] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.373917] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.373961] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.373965] pci 0000:00:1f.2: PME# disabled
[ 0.374003] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
[ 0.374020] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.374460] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
[ 0.374672] pci 0000:0c:00.0: supports D1 D2
[ 0.374674] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.374685] pci 0000:0c:00.0: PME# disabled
[ 0.374815] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.374925] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.374948] pci 0000:03:01.0: supports D1 D2
[ 0.374950] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.374954] pci 0000:03:01.0: PME# disabled
[ 0.374993] pci 0000:03:01.1: reg 10 32bit mmio: [0xf68ff800-0xf68fffff]
[ 0.375048] pci 0000:03:01.1: supports D1 D2
[ 0.375050] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.375054] pci 0000:03:01.1: PME# disabled
[ 0.375092] pci 0000:03:01.2: reg 10 32bit mmio: [0xf68ff700-0xf68ff7ff]
[ 0.375146] pci 0000:03:01.2: supports D1 D2
[ 0.375147] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.375152] pci 0000:03:01.2: PME# disabled
[ 0.375220] pci 0000:00:1e.0: transparent bridge
[ 0.375227] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6800000-0xf68fffff]
[ 0.375275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.375568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.375697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.375764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.375829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.389013] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.389123] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.389232] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.389340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.389448] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.389558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.389668] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.389766] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.389853] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.389865] vgaarb: loaded
[ 0.389914] PCI: Using ACPI for IRQ routing
[ 0.390457] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.390462] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.396007] Switching to clocksource tsc
[ 0.397021] pnp: PnP ACPI init
[ 0.397028] ACPI: bus type pnp registered
[ 0.480083] pnp: PnP ACPI: found 14 devices
[ 0.480085] ACPI: ACPI bus type pnp unregistered
[ 0.480093] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.480096] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.480102] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.480107] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 0.480109] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 0.480111] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 0.480114] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.480116] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.480119] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.480123] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.480126] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.480128] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.480131] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.480133] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.480136] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.480140] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.480143] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.480148] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.480150] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.480152] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.480155] system 00:0d: iomem range 0xe0000-0xfffff has been reserved
[ 0.480157] system 00:0d: iomem range 0x100000-0x7d04d3ff could not be reserved
[ 0.480160] system 00:0d: iomem range 0x7d04d400-0x7dafffff could not be reserved
[ 0.480162] system 00:0d: iomem range 0x7db00000-0x7dbfffff has been reserved
[ 0.480165] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.480168] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.480171] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.480173] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.480176] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.480178] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.480181] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.480183] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.480186] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.480189] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.480191] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.480194] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.480196] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.484890] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.484894] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.484900] pci 0000:00:1c.0: MEM window: 0x84000000-0x841fffff
[ 0.484904] pci 0000:00:1c.0: PREFETCH window: 0x00000084200000-0x000000843fffff
[ 0.484912] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.484915] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.484921] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.484925] pci 0000:00:1c.1: PREFETCH window: 0x00000084400000-0x000000845fffff
[ 0.484932] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[ 0.484935] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.484941] pci 0000:00:1c.2: MEM window: 0x84600000-0x847fffff
[ 0.484946] pci 0000:00:1c.2: PREFETCH window: 0x00000084800000-0x000000849fffff
[ 0.484958] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[ 0.484959] pci 0000:03:01.0: IO window: 0x005000-0x0050ff
[ 0.484964] pci 0000:03:01.0: IO window: 0x005400-0x0054ff
[ 0.484968] pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.484973] pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
[ 0.484977] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.484980] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.484986] pci 0000:00:1e.0: MEM window: 0xf6800000-0xf68fffff
[ 0.484990] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.485003] alloc irq_desc for 16 on node -1
[ 0.485005] alloc kstat_irqs on node -1
[ 0.485009] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.485014] pci 0000:00:1c.0: setting latency timer to 64
[ 0.485023] alloc irq_desc for 17 on node -1
[ 0.485024] alloc kstat_irqs on node -1
[ 0.485027] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.485031] pci 0000:00:1c.1: setting latency timer to 64
[ 0.485040] alloc irq_desc for 18 on node -1
[ 0.485041] alloc kstat_irqs on node -1
[ 0.485044] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.485049] pci 0000:00:1c.2: setting latency timer to 64
[ 0.485056] pci 0000:00:1e.0: setting latency timer to 64
[ 0.485065] alloc irq_desc for 19 on node -1
[ 0.485067] alloc kstat_irqs on node -1
[ 0.485070] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.485075] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.485077] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.485079] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.485081] pci_bus 0000:0b: resource 1 mem: [0x84000000-0x841fffff]
[ 0.485083] pci_bus 0000:0b: resource 2 pref mem [0x84200000-0x843fffff]
[ 0.485086] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.485087] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.485090] pci_bus 0000:0c: resource 2 pref mem [0x84400000-0x845fffff]
[ 0.485092] pci_bus 0000:0d: resource 0 io: [0x4000-0x4fff]
[ 0.485094] pci_bus 0000:0d: resource 1 mem: [0x84600000-0x847fffff]
[ 0.485096] pci_bus 0000:0d: resource 2 pref mem [0x84800000-0x849fffff]
[ 0.485098] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.485100] pci_bus 0000:03: resource 1 mem: [0xf6800000-0xf68fffff]
[ 0.485102] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.485104] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.485106] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.485108] pci_bus 0000:04: resource 0 io: [0x5000-0x50ff]
[ 0.485110] pci_bus 0000:04: resource 1 io: [0x5400-0x54ff]
[ 0.485112] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.485114] pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.485138] NET: Registered protocol family 2
[ 0.485235] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.485802] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.487341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.487792] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.487794] TCP reno registered
[ 0.487918] NET: Registered protocol family 1
[ 0.487938] pci 0000:00:02.0: Boot video device
[ 0.488142] Unpacking initramfs...
[ 0.682830] Freeing initrd memory: 9761k freed
[ 0.686806] audit: initializing netlink socket (disabled)
[ 0.686820] type=2000 audit(1263757521.683:1): initialized
[ 0.687042] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.688214] VFS: Disk quotas dquot_6.5.2
[ 0.688258] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.688321] msgmni has been set to 3930
[ 0.688486] alg: No test for stdrng (krng)
[ 0.688526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.688528] io scheduler noop registered
[ 0.688530] io scheduler anticipatory registered
[ 0.688531] io scheduler deadline registered
[ 0.688559] io scheduler cfq registered (default)
[ 0.688681] alloc irq_desc for 24 on node -1
[ 0.688682] alloc kstat_irqs on node -1
[ 0.688695] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.688705] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.688839] alloc irq_desc for 25 on node -1
[ 0.688841] alloc kstat_irqs on node -1
[ 0.688849] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.688858] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.688995] alloc irq_desc for 26 on node -1
[ 0.688997] alloc kstat_irqs on node -1
[ 0.689005] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.689014] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.689165] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004980000, using 1216k, total 1216k
[ 0.689167] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.689169] vesafb: scrolling: redraw
[ 0.689171] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.689200] fb0: VESA VGA frame buffer device
[ 0.690344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.690478] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.690757] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.690883] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.690933] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.691491] i8042.c: Warning: Keylock active.
[ 0.694759] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.694763] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.694848] mice: PS/2 mouse device common for all mice
[ 0.694861] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.694948] rtc_cmos 00:03: RTC can wake from S4
[ 0.694976] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.695007] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.695018] cpuidle: using governor ladder
[ 0.695020] cpuidle: using governor menu
[ 0.695023] No iBFT detected.
[ 0.695289] TCP cubic registered
[ 0.695379] NET: Registered protocol family 10
[ 0.695754] lo: Disabled Privacy Extensions
[ 0.695991] Mobile IPv6
[ 0.695993] NET: Registered protocol family 17
[ 0.696061] registered taskstats version 1
[ 0.696791] rtc_cmos 00:03: setting system clock to 2010-01-17 19:45:22 UTC (1263757522)
[ 0.696839] Freeing unused kernel memory: 576k freed
[ 0.697021] Write protecting the kernel read-only data: 4096k
[ 0.697247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.773079] Linux agpgart interface v0.103
[ 0.774731] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.775564] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.778508] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.792160] [drm] Initialized drm 1.1.0 20060810
[ 0.796924] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.798727] ACPI: Lid Switch [LID]
[ 0.798766] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 0.798773] ACPI: Power Button [PBTN]
[ 0.798809] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 0.798813] ACPI: Sleep Button [SBTN]
[ 0.810322] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.810326] i915 0000:00:02.0: setting latency timer to 64
[ 0.816061] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 0.816064] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 0.816156] alloc irq_desc for 27 on node -1
[ 0.816158] alloc kstat_irqs on node -1
[ 0.816168] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 0.816173] [drm] set up 31M of stolen space
[ 1.478617] [drm] TV-25: set mode NTSC 480i 0
[ 1.622942] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.623053] fb0: inteldrmfb frame buffer device
[ 1.623054] registered panic notifier
[ 1.657807] acpi device:3d: registered as cooling_device0
[ 1.658423] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[ 1.658429] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 1.658472] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[ 1.658529] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input6
[ 1.658533] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 1.658547] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.674259] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.674266] ACPI: Thermal Zone [THM] (50 C)
[ 1.753220] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.753222] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.753264] alloc irq_desc for 22 on node -1
[ 1.753266] alloc kstat_irqs on node -1
[ 1.753273] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.753282] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.753381] alloc irq_desc for 28 on node -1
[ 1.753383] alloc kstat_irqs on node -1
[ 1.753394] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 1.771051] usbcore: registered new interface driver usbfs
[ 1.771075] usbcore: registered new interface driver hub
[ 1.781622] usbcore: registered new device driver usb
[ 1.782865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.799781] SCSI subsystem initialized
[ 1.808581] firewire_ohci 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.821897] sdhci: Secure Digital Host Controller Interface driver
[ 1.821899] sdhci: Copyright(c) Pierre Ossman
[ 1.822791] libata version 3.00 loaded.
[ 1.860411] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:ea:f9:a2
[ 1.860414] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.860438] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[ 1.860469] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.860485] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.860489] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.860510] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.860536] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.864407] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.864424] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.884021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.884051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.884053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.884055] usb usb1: Product: EHCI Host Controller
[ 1.884057] usb usb1: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 1.884058] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.884123] usb usb1: configuration #1 chosen from 1 choice
[ 1.884149] hub 1-0:1.0: USB hub found
[ 1.884154] hub 1-0:1.0: 6 ports detected
[ 1.884204] ahci 0000:00:1f.2: version 3.0
[ 1.884214] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.884248] alloc irq_desc for 29 on node -1
[ 1.884249] alloc kstat_irqs on node -1
[ 1.884260] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.884299] ahci: SSS flag set, parallel bus scan disabled
[ 1.884333] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.884336] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.884341] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.892007] firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
[ 1.892027] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 1.892046] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.894086] Registered led device: mmc0::
[ 1.895105] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[ 1.908043] scsi0 : ahci
[ 1.908148] scsi1 : ahci
[ 1.908222] scsi2 : ahci
[ 1.908294] scsi3 : ahci
[ 1.908368] scsi4 : ahci
[ 1.908441] scsi5 : ahci
[ 1.908855] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 29
[ 1.908858] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 29
[ 1.908860] ata3: DUMMY
[ 1.908861] ata4: DUMMY
[ 1.908864] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 29
[ 1.908867] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 29
[ 1.908988] alloc irq_desc for 20 on node -1
[ 1.908990] alloc kstat_irqs on node -1
[ 1.908996] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.909016] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.909020] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.909031] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.909061] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.912662] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.912675] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
[ 1.912958] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.912970] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.925006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.925024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.925026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.925028] usb usb2: Product: EHCI Host Controller
[ 1.925029] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 1.925031] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.925089] usb usb2: configuration #1 chosen from 1 choice
[ 1.925114] hub 2-0:1.0: USB hub found
[ 1.925120] hub 2-0:1.0: 6 ports detected
[ 1.984256] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[ 1.986785] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.986822] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.986833] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.986836] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.986844] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.986874] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.986908] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.986910] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.986912] usb usb3: Product: UHCI Host Controller
[ 1.986913] usb usb3: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.986915] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.986999] usb usb3: configuration #1 chosen from 1 choice
[ 1.987048] hub 3-0:1.0: USB hub found
[ 1.987053] hub 3-0:1.0: 2 ports detected
[ 1.987099] alloc irq_desc for 21 on node -1
[ 1.987101] alloc kstat_irqs on node -1
[ 1.987107] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.987115] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.987118] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.987124] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.987160] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.987191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.987193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.987195] usb usb4: Product: UHCI Host Controller
[ 1.987196] usb usb4: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.987198] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.987271] usb usb4: configuration #1 chosen from 1 choice
[ 1.987316] hub 4-0:1.0: USB hub found
[ 1.987322] hub 4-0:1.0: 2 ports detected
[ 1.987371] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.987378] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.987381] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.987387] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.987414] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.987446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.987448] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.987450] usb usb5: Product: UHCI Host Controller
[ 1.987452] usb usb5: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.987453] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.987522] usb usb5: configuration #1 chosen from 1 choice
[ 1.987569] hub 5-0:1.0: USB hub found
[ 1.987575] hub 5-0:1.0: 2 ports detected
[ 1.987616] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.987622] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.987625] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.987631] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.987658] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.987689] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.987691] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.987693] usb usb6: Product: UHCI Host Controller
[ 1.987695] usb usb6: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.987697] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.987768] usb usb6: configuration #1 chosen from 1 choice
[ 1.987813] hub 6-0:1.0: USB hub found
[ 1.987818] hub 6-0:1.0: 2 ports detected
[ 1.987863] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.987869] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.987872] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.987880] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.987906] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.987938] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.987940] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.987942] usb usb7: Product: UHCI Host Controller
[ 1.987943] usb usb7: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.987945] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.988017] usb usb7: configuration #1 chosen from 1 choice
[ 1.988067] hub 7-0:1.0: USB hub found
[ 1.988073] hub 7-0:1.0: 2 ports detected
[ 1.988116] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.988122] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.988125] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.988135] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.988164] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.988194] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.988196] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.988198] usb usb8: Product: UHCI Host Controller
[ 1.988200] usb usb8: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 1.988201] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.988270] usb usb8: configuration #1 chosen from 1 choice
[ 1.988316] hub 8-0:1.0: USB hub found
[ 1.988321] hub 8-0:1.0: 2 ports detected
[ 2.388069] firewire_core: created device fw0: GUID 314fc00006e3c890, S400
[ 2.392015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.392623] ata1.00: ATA-8: WDC WD800BJKT-75F4T0, 11.01A11, max UDMA/133
[ 2.392626] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 2.393298] ata1.00: configured for UDMA/133
[ 2.408094] scsi 0:0:0:0: Direct-Access ATA WDC WD800BJKT-75 11.0 PQ: 0 ANSI: 5
[ 2.432008] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.613421] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 2.613423] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.613425] usb 5-1: Product: 5880
[ 2.613427] usb 5-1: Manufacturer: Broadcom Corp
[ 2.613428] usb 5-1: SerialNumber: 0123456789ABCD
[ 2.613484] usb 5-1: configuration #0 chosen from 1 choice
[ 2.613486] usb 5-1: config 0 descriptor??
[ 3.296014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.301293] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A2S, 4D13, max UDMA/100, ATAPI AN
[ 3.305414] ata2.00: configured for UDMA/100
[ 3.322867] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A2S 4D13 PQ: 0 ANSI: 5
[ 3.640016] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.976014] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.997804] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.997873] sd 0:0:0:0: [sda] Write Protect is off
[ 3.997875] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.997894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.997996] sda: sda1 sda2
[ 4.022409] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.034384] sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 4.034386] Uniform CD-ROM driver Revision: 3.20
[ 4.034464] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.037168] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.037221] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.232294] device-mapper: uevent: version 1.0.3
[ 4.232389] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 11.458983] Intel AES-NI instructions are not detected.
[ 12.213957] PM: Starting manual resume from disk
[ 12.220935] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 12.221400] SGI XFS Quota Management subsystem
[ 12.244555] XFS mounting filesystem dm-2
[ 14.464816] Ending clean XFS mount for filesystem: dm-2
[ 15.048153] udev: starting version 150
[ 15.207164] ACPI: AC Adapter [AC] (on-line)
[ 15.242082] ACPI: SSDT 000000007d050999 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 15.242484] ACPI: SSDT 000000007d050df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 15.242754] Monitor-Mwait will be used to enter C-1 state
[ 15.242772] Monitor-Mwait will be used to enter C-2 state
[ 15.242788] Monitor-Mwait will be used to enter C-3 state
[ 15.242792] Marking TSC unstable due to TSC halts in idle
[ 15.242904] processor LNXCPU:00: registered as cooling_device1
[ 15.243346] Switching to clocksource hpet
[ 15.243829] ACPI: SSDT 000000007d050c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 15.244136] ACPI: SSDT 000000007d0513b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 15.245353] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 15.247651] processor LNXCPU:01: registered as cooling_device2
[ 15.275269] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.299810] ACPI: Battery Slot [BAT0] (battery present)
[ 15.299850] ACPI: WMI: Mapper loaded
[ 15.299975] ACPI: Battery Slot [BAT1] (battery absent)
[ 15.307782] cfg80211: Using static regulatory domain info
[ 15.307784] cfg80211: Regulatory domain: US
[ 15.307785] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.307788] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 15.307790] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.307792] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.307794] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.307797] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.307799] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 15.307805] cfg80211: Calling CRDA for country: US
[ 15.524785] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0233]
[ 15.565897] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.652832] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 15.652836] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 15.652839] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 15.652847] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 15.652849] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf6800000 - 0xf68fffff
[ 15.652852] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 15.707829] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 15.797115] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.834590] phy0: Selected rate control algorithm 'minstrel'
[ 15.835130] Registered led device: b43-phy0::tx
[ 15.835144] Registered led device: b43-phy0::rx
[ 15.835158] Registered led device: b43-phy0::radio
[ 15.835207] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 15.839486] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.839536] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.943544] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 15.953446] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.953504] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.953553] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.953604] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.992643] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input13
[ 16.009820] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input14
[ 16.410920] loop: module loaded
[ 17.273467] XFS mounting filesystem dm-6
[ 17.454573] Ending clean XFS mount for filesystem: dm-6
[ 17.506147] XFS mounting filesystem dm-5
[ 25.866641] Ending clean XFS mount for filesystem: dm-5
[ 25.932344] XFS mounting filesystem dm-3
[ 26.114661] Ending clean XFS mount for filesystem: dm-3
[ 26.160025] XFS mounting filesystem dm-4
[ 26.346620] Ending clean XFS mount for filesystem: dm-4
[ 26.476155] Adding 1998840k swap on /dev/mapper/rootvg-swap. Priority:-1 extents:1 across:1998840k
[ 29.887166] kvm: disabled by bios
[ 30.184657] /dev/vmmon[1573]: Module vmmon: registered with major=10 minor=165
[ 30.184668] /dev/vmmon[1573]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[ 30.184672] /dev/vmmon[1573]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[ 30.184674] /dev/vmmon[1573]: Module vmmon: initialized
[ 30.243358] /dev/vmci[1583]: VMCI: Driver initialized.
[ 30.243462] /dev/vmci[1583]: Module vmci: registered with major=10 minor=57
[ 30.243464] /dev/vmci[1583]: Module vmci: initialized
[ 31.115912] /dev/vmnet: open called by PID 1652 (vmnet-dhcpd)
[ 31.115920] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 31.115937] /dev/vmnet: port on hub 1 successfully opened
[ 31.137634] /dev/vmnet: open called by PID 1654 (vmnet-netifup)
[ 31.137643] /dev/vmnet: port on hub 1 successfully opened
[ 31.216050] /dev/vmnet: open called by PID 1657 (vmnet-dhcpd)
[ 31.216059] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 31.216077] /dev/vmnet: port on hub 8 successfully opened
[ 31.251696] /dev/vmnet: open called by PID 1667 (vmnet-natd)
[ 31.251707] /dev/vmnet: port on hub 8 successfully opened
[ 31.277370] /dev/vmnet: open called by PID 1668 (vmnet-netifup)
[ 31.277379] /dev/vmnet: port on hub 8 successfully opened
[ 31.493582] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 32.045835] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 32.045837] vboxdrv: Successfully done.
[ 32.045838] vboxdrv: Found 2 processor cores.
[ 32.045923] VBoxDrv: dbg - g_abExecMemory=ffffffffa06871a0
[ 32.045937] vboxdrv: fAsync=0 offMin=0x130 offMax=0x60d
[ 32.046120] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 32.046122] vboxdrv: Successfully loaded version 3.1.2_OSE (interface 0x00100001).
[ 33.885206] lp: driver loaded but no devices found
[ 33.902697] ppdev: user-space parallel port driver
[ 37.359407] Bluetooth: Core ver 2.15
[ 37.359633] NET: Registered protocol family 31
[ 37.359634] Bluetooth: HCI device and connection manager initialized
[ 37.359636] Bluetooth: HCI socket layer initialized
[ 37.400960] Bluetooth: L2CAP ver 2.14
[ 37.400966] Bluetooth: L2CAP socket layer initialized
[ 37.418870] Bluetooth: RFCOMM TTY layer initialized
[ 37.418879] Bluetooth: RFCOMM socket layer initialized
[ 37.418884] Bluetooth: RFCOMM ver 1.11
[ 37.448708] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.448710] Bluetooth: BNEP filters: protocol multicast
[ 37.495682] Bridge firewalling registered
[ 37.520583] Bluetooth: SCO (Voice Link) ver 0.6
[ 37.520585] Bluetooth: SCO socket layer initialized
[ 39.017381] hald-probe-inpu[2444]: segfault at 7ff8 ip 00007ff59a41d6f9 sp 00007fffae8a5aa0 error 4 in libc-2.11.1.so[7ff59a3a7000+158000]
[ 39.018169] hald-probe-inpu[2445]: segfault at 7ff8 ip 00007f0a743ad6f9 sp 00007fffd4f55610 error 4 in libc-2.11.1.so[7f0a74337000+158000]
[ 39.019256] hald-probe-inpu[2447]: segfault at 7ff8 ip 00007f229d5bf6f9 sp 00007fffe6723720 error 4 in libc-2.11.1.so[7f229d549000+158000]
[ 40.561102] [drm] LVDS-8: set mode 1440x900 c
[ 40.807578] [drm] TV-25: set mode NTSC 480i 0
[ 40.988794] [drm] TV-25: set mode NTSC 480i 0
[ 41.225011] vmnet1: no IPv6 routers present
[ 41.318992] [drm] TV-25: set mode NTSC 480i 0
[ 41.368005] vmnet8: no IPv6 routers present
[ 41.498926] [drm] TV-25: set mode NTSC 480i 0
[ 58.828597] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 59.688901] [drm] TV-25: set mode NTSC 480i 0
[ 59.830321] [drm] TV-25: set mode NTSC 480i 0
[ 60.380477] [drm] TV-25: set mode NTSC 480i 0
[ 60.522044] [drm] TV-25: set mode NTSC 480i 0
[ 2393.672562] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 2393.724341] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 2393.725185] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2396.676857] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 2396.677633] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2396.677915] /dev/vmnet: open called by PID 1645 (vmnet-bridge)
[ 2396.677938] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2396.677990] /dev/vmnet: port on hub 0 successfully opened
[ 2396.678023] bridge-eth0: up
[ 2396.678031] bridge-eth0: attached
[ 2407.420032] eth0: no IPv6 routers present
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A19
board_vendor: Dell Inc.
board_name: 0W620R
board_version:
** Loaded modules:
Module Size Used by
sco 7193 2
bridge 39582 0
stp 1440 1 bridge
bnep 9395 2
rfcomm 29501 0
l2cap 24656 4 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41795 6 sco,bnep,rfcomm,l2cap
ppdev 5030 0
lp 7462 0
acpi_cpufreq 5555 0
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
uinput 6376 1
vmnet 36940 13
parport_pc 18839 0
parport 27938 3 ppdev,lp,parport_pc
vmblock 10462 1
vsock 35791 0
vmci 46628 1 vsock
vmmon 65782 0
kvm 210792 0
ext2 52969 1
mbcache 4970 1 ext2
loop 11767 0
firewire_sbp2 11450 0
joydev 8411 0
snd_hda_codec_intelhdmi 10695 1
snd_hda_codec_idt 42417 1
snd_hda_intel 18147 2
arc4 1274 2
snd_hda_codec 54212 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
ecb 1841 2
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32399 0
b43 146070 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 15502 1 snd_pcm
snd 44718 13 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 4598 1 snd
pcspkr 1699 0
rng_core 2990 1 b43
serio_raw 3752 0
evdev 7336 24
yenta_socket 19051 1
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
dell_laptop 1969 0
mac80211 135407 1 b43
psmouse 49521 0
cfg80211 101253 2 b43,mac80211
wmi 4307 0
i2c_i801 7766 0
rsrc_nonstatic 7294 1 yenta_socket
dcdbas 5048 1 dell_laptop
processor 29479 3 acpi_cpufreq
battery 4998 0
ac 2192 0
rfkill 12996 4 bluetooth,dell_laptop,cfg80211
xfs 435340 5
exportfs 3170 1 xfs
sha256_generic 8692 2
cryptd 5366 0
aes_x86_64 7340 2
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10507 1
dm_mod 53658 25 dm_crypt
sg 18728 0
sr_mod 12602 0
cdrom 29399 1 sr_mod
sd_mod 29673 3
crc_t10dif 1276 1 sd_mod
uhci_hcd 18457 0
ssb 38347 1 b43
ahci 31494 2
sdhci_pci 5565 0
sdhci 13966 1 sdhci_pci
libata 131655 1 ahci
firewire_ohci 19452 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
mmc_core 45456 3 b43,ssb,sdhci
led_class 2401 2 b43,sdhci
scsi_mod 121909 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
pcmcia 19426 2 b43,ssb
pcmcia_core 24054 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
ehci_hcd 30578 0
e1000e 109871 0
usbcore 121687 3 uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
fan 3346 0
i915 247359 1
drm_kms_helper 18883 1 i915
i2c_algo_bit 4225 1 i915
button 4634 1 i915
video 17445 1 i915
thermal_sys 11878 4 processor,thermal,fan,video
output 1692 1 video
drm 137190 3 i915,drm_kms_helper
i2c_core 15584 4 i2c_i801,i915,i2c_algo_bit,drm
intel_agp 25521 1
agpgart 24733 2 drm,intel_agp
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ef98 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4181
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41b9
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Dell Device [1028:0233]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 0000000084400000-00000000845fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 1, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4171
Capabilities: [90] Subsystem: Dell Device [1028:0233]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 84600000-847fffff
Prefetchable memory behind bridge: 0000000084800000-00000000849fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4179
Capabilities: [90] Subsystem: Dell Device [1028:0233]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f6800000-f68fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device [1028:0233]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 29
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0300c Data: 4199
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f68ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f68ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c] Virtual Channel <?>
Capabilities: [160] Device Serial Number c8-9c-e5-ff-ff-43-90-4c
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
--- End Message ---