[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#630574: marked as done (linux-image-2.6.32-5-xen-686: Kernel oops when running DOM0 and use padlock_aes or padlock_sha module (on VIA C7))

Your message dated Tue, 25 Jun 2013 20:00:55 +0200
with message-id <20130625180055.GA4890@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #630574,
regarding linux-image-2.6.32-5-xen-686: Kernel oops when running DOM0 and use padlock_aes or padlock_sha module (on VIA C7)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
630574: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=630574
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.32-34squeeze1
Severity: normal

I have problem with Debian Squeeze.
Kernel 2.6.32-5-xen-686 running as DOM0 under XEN hypervisor-4.0 on VIA C7 when padlock_aes is used, until I blaclisted padlock_aes and padlock_sha in /etc/modules... kernel oops-ed when I try to use cryptsetup to create and use encrypted block device. Sometimes oops-ed, sometimes hard-freezed after few seconds of using crypto block device.
I have tried to "upgrade" to testing and use XEN hypervisor-4.1, but the result unchanged. 

When kernel is NOT running under XEN hypervisor no problem was encoutered.

Voty*

-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-686 (Debian 2.6.32-34squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 09:43:15 UTC 2011 

** Command line:
placeholder root=/dev/mapper/wdc-peon--root ro quiet

** Not tainted

** Kernel log:
[    8.632544] PM: Starting manual resume from disk
[    8.632561] PM: Resume from partition 254:1
[    8.632570] PM: Checking hibernation image.
[    8.633134] PM: Error -22 checking image file
[    8.633145] PM: Resume from disk failed.
[    8.812931] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[   10.036572] <30>udevd[307]: starting version 170
[   10.253947] <30>udevd[307]: converting old udev database
[ 10.736919] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 
[   10.736949] ACPI: Power Button [PWRB]
[ 10.737206] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 
[   10.737246] ACPI: Sleep Button [SLPB]
[ 10.737522] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 
[   10.737542] ACPI: Power Button [PWRF]
[   11.456660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.557390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.751048] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   12.560345] Error: Driver 'pcspkr' is already registered, aborting...
[   14.398425] loop: module loaded
[ 17.873597] Adding 499704k swap on /dev/mapper/crypto-peon-swap. Priority:-1 extents:1 across:499704k [ 19.075754] Bridge firewalling registered 
[   19.123817] device eth0 entered promiscuous mode
[   19.146579] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   19.164579] br0: port 1(eth0) entering learning state
[   19.818914] device eth1 entered promiscuous mode
[   19.842331] eth1: link up, 100Mbps, full-duplex, lpa 0x4181
[   19.861516] br1: port 1(eth1) entering learning state
[   20.823372] RPC: Registered udp transport module.
[   20.823385] RPC: Registered tcp transport module.
[   20.823395] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.941631] Slow work thread pool: Starting up
[   20.941846] Slow work thread pool: Ready
[   20.942090] FS-Cache: Loaded
[   21.068723] FS-Cache: Netfs 'nfs' registered for caching
[   21.175386] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   25.009411] Event-channel device installed.
[   25.632250] XENBUS: Unable to read cpu state
[   29.516120] br0: no IPv6 routers present
[   30.088089] br1: no IPv6 routers present
[   34.164099] br0: port 1(eth0) entering forwarding state
[   34.860090] br1: port 1(eth1) entering forwarding state
[   38.355872] device vif1.0 entered promiscuous mode
[   38.441218] br0: port 2(vif1.0) entering learning state
[   38.773238] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.894905] device vif1.1 entered promiscuous mode
[   38.926920] br1: port 2(vif1.1) entering learning state
[   44.185561] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi)
[ 44.279847] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) 
[   49.185247] device vif2.0 entered promiscuous mode
[   49.224606] br0: port 3(vif2.0) entering learning state
[   49.288262] vif1.0: no IPv6 routers present
[   49.404137] vif1.1: no IPv6 routers present
[   53.440123] br0: port 2(vif1.0) entering forwarding state
[   53.924110] br1: port 2(vif1.1) entering forwarding state
[   57.256872] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi)
[ 57.478559] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) 
[   59.932123] vif2.0: no IPv6 routers present
[   61.542471] device vif3.0 entered promiscuous mode
[   61.570982] br0: port 4(vif3.0) entering learning state
[   64.224150] br0: port 3(vif2.0) entering forwarding state
[   72.140124] vif3.0: no IPv6 routers present
[   73.576136] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi)
[ 73.681311] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) 
[   76.568195] br0: port 4(vif3.0) entering forwarding state
[  211.425763] br0: port 3(vif2.0) entering disabled state
[  211.426685] br0: port 3(vif2.0) entering disabled state
[  222.105655] device vif4.0 entered promiscuous mode
[  222.137592] br0: port 3(vif4.0) entering learning state
[  225.727992] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi)
[ 226.035937] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) 
[  232.880105] vif4.0: no IPv6 routers present
[  237.136140] br0: port 3(vif4.0) entering forwarding state
[127969.159262] device vif5.0 entered promiscuous mode
[127969.224007] br0: port 5(vif5.0) entering learning state
[127975.289324] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi) [127975.363826] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) [127975.469114] blkback: ring-ref 10, event-channel 11, protocol 1 (x86_32-abi) [127975.570387] blkback: ring-ref 11, event-channel 12, protocol 1 (x86_32-abi) 
[127979.480118] vif5.0: no IPv6 routers present
[127984.220178] br0: port 5(vif5.0) entering forwarding state
[132860.398067] br0: port 5(vif5.0) entering disabled state
[132860.399370] br0: port 5(vif5.0) entering disabled state
[132930.470213] device vif6.0 entered promiscuous mode
[132930.505340] br0: port 5(vif6.0) entering learning state
[132934.227252] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi) [132934.410343] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) [132934.556565] blkback: ring-ref 10, event-channel 11, protocol 1 (x86_32-abi) [132934.847036] blkback: ring-ref 11, event-channel 12, protocol 1 (x86_32-abi) 
[132941.096168] vif6.0: no IPv6 routers present
[132945.504175] br0: port 5(vif6.0) entering forwarding state
[134615.926897] br0: port 5(vif6.0) entering disabled state
[134615.930324] br0: port 5(vif6.0) entering disabled state
[134629.694492] device vif7.0 entered promiscuous mode
[134629.728025] br0: port 5(vif7.0) entering learning state
[134632.011414] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_32-abi) [134632.198784] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_32-abi) [134632.343249] blkback: ring-ref 10, event-channel 11, protocol 1 (x86_32-abi) [134632.623989] blkback: ring-ref 11, event-channel 12, protocol 1 (x86_32-abi) 
[134640.192173] vif7.0: no IPv6 routers present
[134644.724182] br0: port 5(vif7.0) entering forwarding state

** Model information
not available

** Loaded modules:
Module                  Size  Used by
xt_physdev 1228 10 iptable_filter 1790 1 ip_tables 7706 1 iptable_filter 
x_tables                8327  2 xt_physdev,ip_tables
xen_evtchn 3435 5 xenfs 7180 1 nfsd 193023 2 exportfs 2586 1 nfsd 
nfs                   206490  0 lockd                  49297  2 nfsd,nfs
fscache                24418  1 nfs
nfs_acl                 1695  2 nfsd,nfs
auth_rpcgss            25200  2 nfsd,nfs
sunrpc                134328  6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge                 32895  0 stp                      996  1 bridge
sha256_generic 10748 6 aes_i586 6816 6 aes_generic 25738 1 aes_i586 cbc 2047 3 loop 9729 0 dm_crypt 9196 3 snd_pcm 47402 0 snd_timer 12258 1 snd_pcm 
snd                    34387  2 snd_pcm,snd_timer
evdev                   5609  3 soundcore               3450  1 snd
snd_page_alloc          5041  1 snd_pcm
i2c_viapro 4431 0 psmouse 44777 0 pcspkr 1207 0 serio_raw 2916 0 i2c_core 12751 1 i2c_viapro 
shpchp                 21264  0 pci_hotplug            18065  1 shpchp
processor 30797 0 button 3598 0 acpi_processor 3623 1 processor,[permanent] 
ext4                  256232  1 mbcache                 3762  1 ext4
jbd2                   55899  1 ext4
crc16                   1027  1 ext4
dm_mod                 45834  40 dm_crypt
sd_mod                 25933  3 crc_t10dif              1012  1 sd_mod
ata_generic 2067 0 fan 2586 0 sata_via 5648 2 pata_via 5669 0 uhci_hcd 16073 0 ehci_hcd 28861 0 libata 115821 3 ata_generic,sata_via,pata_via thermal 9206 0 via_rhine 14851 0 mii 2714 1 via_rhine 
usbcore                98885  3 uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
scsi_mod              104613  2 sd_mod,libata
thermal_sys             9378  3 processor,fan,thermal

** Network interface configuration:

auto lo
iface lo inet loopback

auto br0
iface br0 inet static
    address 192.168.28.9
    netmask 255.255.255.0
    gateway 192.168.28.10
    bridge_ports eth0
    bridge_maxwait 0

auto br1
iface br1 inet manual
    bridge_ports eth1
    bridge_maxwait 0


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host        valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 
    link/ether 00:19:db:29:9c:2f brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 
    link/ether 00:05:5d:06:97:6c brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:19:db:29:9c:2f brd ff:ff:ff:ff:ff:ff 
    inet 192.168.28.9/24 brd 192.168.28.255 scope global br0
inet6 fe80::219:dbff:fe29:9c2f/64 scope link valid_lft forever preferred_lft forever 5: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:05:5d:06:97:6c brd ff:ff:ff:ff:ff:ff inet6 fe80::205:5dff:fe06:976c/64 scope link valid_lft forever preferred_lft forever 6: vif1.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever 7: vif1.1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever 9: vif3.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever 10: vif4.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever 13: vif7.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever 

*** Device statistics:
Inter-|   Receive                                                |  Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 856 14 0 0 0 0 0 0 856 14 0 0 0 0 0 0 eth0: 5253876 29203 0 0 0 0 0 0 33048348 35218 0 0 0 0 0 0 eth1:410735686 1345661 0 0 0 0 0 0 94494366 416821 0 0 0 0 0 0 br0:12793095 6038 0 0 0 0 0 1093 1073998 3265 0 0 0 0 0 0 br1:37603507 769570 0 0 0 0 0 769570 578 7 0 0 0 0 0 0 vif1.0:295683733 341989 0 0 0 0 0 0 46135157 215617 0 5 0 0 0 0 vif1.1:88373632 410971 0 0 0 0 0 0 409502004 1331790 0 4 0 0 0 0 vif3.0: 2691496 4218 0 0 0 0 0 0 1785176 6341 0 6 0 0 0 0 vif4.0:19430511 53731 0 0 0 0 0 0 27209521 64721 0 3 0 0 0 0 vif7.0:11431207 76744 0 0 0 0 0 0 5032652 75996 0 3 0 0 0 0 

*** Protocol statistics:
Ip:
    732701 total packets received
    3 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    7621 incoming packets delivered
    3221 requests sent out
Icmp:
    7 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 2
        echo replies: 5
    7 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 2
        echo request: 5
IcmpMsg:
        InType0: 5
        InType3: 2
        OutType3: 2
        OutType8: 5
Tcp:
    12 active connections openings
    6 passive connection openings
    0 failed connection attempts
    0 connection resets received
    2 connections established
    4882 segments received
    3179 segments send out
    3 segments retransmited
    0 bad segments received.
    1 resets sent
Udp:
    30 packets received
    0 packets to unknown port received.
    0 packet receive errors
    32 packets sent
UdpLite:
TcpExt:
    5 TCP sockets finished time wait in fast timer
    68 delayed acks sent
    24 delayed acks further delayed because of locked socket
    Quick ack mode was activated 6 times
    7 packets directly queued to recvmsg prequeue.
    1 bytes directly received in process context from prequeue
    2177 packet headers predicted
    142 acknowledgments not containing data payload received
    2016 predicted acknowledgments
    2 congestion windows recovered without slow start after partial ack
    3 other TCP timeouts
    6 DSACKs sent for old packets
    3 DSACKs received
    TCPDSACKIgnoredOld: 1
IpExt:
    InMcastPkts: 2282
    InBcastPkts: 420
    InOctets: 47406775
    OutOctets: 1027324
    InMcastOctets: 63896
    InBcastOctets: 49408

*** Device features:
br0: 0x11803
br1: 0x1803
eth0: 0x0
eth1: 0x0
lo: 0x13865
vif1.0: 0x10803
vif1.1: 0x10803
vif3.0: 0x10803
vif4.0: 0x10803
vif7.0: 0x10803

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- 
	Latency: 8
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
	Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4 
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fb000000-fcffffff
	Prefetchable memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR+ 
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at ff00 [size=8]
	Region 1: I/O ports at fe00 [size=4]
	Region 2: I/O ports at fd00 [size=8]
	Region 3: I/O ports at fc00 [size=4]
	Region 4: I/O ports at fb00 [size=16]
	Region 5: I/O ports at f400 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32
	Interrupt: pin A routed to IRQ 20
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at fa00 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 21
	Region 4: I/O ports at f900 [size=32]
	Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 21
	Region 4: I/O ports at f800 [size=32]
	Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at f700 [size=32]
	Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at f600 [size=32]
	Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 21
	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard [1106:3227] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at f200 [size=256]
	Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: via-rhine
00:14.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 43) 
	Subsystem: D-Link System Inc DFE-530TX rev A [1186:1400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at f000 [size=256]
	Region 1: Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at 3bf00000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] (rev 01) (prog-if 00 [VGA controller]) 
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7199]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 32 (500ns min)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-xen-686 (SMP w/1 CPU core)
Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-xen-686 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools 0.99 tools for generating an initramfs 
ii  linux-base                    3.2        Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo 

Versions of packages linux-image-2.6.32-5-xen-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver ii libc6-xen 2.13-4 Embedded GNU C Library: Shared lib 

Versions of packages linux-image-2.6.32-5-xen-686 suggests:
pn  grub                   <none>            (no description available)
ii linux-doc-2.6.32 2.6.32-34squeeze1 Linux kernel specific documentatio 

Versions of packages linux-image-2.6.32-5-xen-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
ii  xen-hypervisor-4.0-i386 [xen- 4.0.1-2    The Xen Hypervisor on i386
ii  xen-hypervisor-4.1-i386 [xen- 4.1.0-3    Xen Hypervisor on i386

-- debconf information excluded

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: