[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#622333: marked as done (Debian Squeeze hangs with kernel 2.6.32-5-xen-686)



Your message dated Sun, 23 Jun 2013 16:10:44 +0200
with message-id <20130623141044.GA6051@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #622333,
regarding Debian Squeeze hangs with kernel 2.6.32-5-xen-686
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
622333: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622333
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-31
Severity: normal



-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9 01:27:54 UTC 2011

** Command line:
placeholder root=UUID=213f474a-b67c-45f7-832f-91c9471e5871 ro quiet

** Tainted: W (512)
 * Taint on warning.

** Kernel log:
[   23.900827] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   24.426262] parport_pc 00:06: reported by Plug and Play ACPI
[   24.426427] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   24.553014] Error: Driver 'pcspkr' is already registered, aborting...
[   24.758132] xen: registering gsi 22 triggering 0 polarity 1
[   24.758138] xen_allocate_pirq: returning irq 22 for gsi 22
[   24.758141] xen: --> irq=22
[   24.758148] Already setup the GSI :22
[   24.758153] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   24.758304] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   27.630643] Adding 979832k swap on /dev/md0.  Priority:-1 extents:1 across:979832k
[   27.878666] loop: module loaded
[   28.022223] usbcore: registered new interface driver usblp
[   30.296015] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[   30.296038] REISERFS (device md1): using ordered data mode
[   30.301804] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   30.302288] REISERFS (device md1): checking transaction log (md1)
[   30.334588] REISERFS (device md1): Using r5 hash to sort names
[   30.842588] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   32.136579] Event-channel device installed.
[   32.304384] lp0: using parport0 (interrupt-driven).
[   32.516899] ppdev: user-space parallel port driver
[   32.767175] XENBUS: Unable to read cpu state
[   35.803063] Bridge firewalling registered
[   36.638358] peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.659625] device peth0 entered promiscuous mode
[   36.676708] eth0: port 1(peth0) entering forwarding state
[   42.223388] device vif1.0 entered promiscuous mode
[   42.229774] eth0: port 2(vif1.0) entering forwarding state
[   42.341550] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.418204] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   42.418810] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   42.418814] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   42.418818] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   42.442587] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.461135] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.464470] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.464477] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   44.548240] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   44.584287] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   47.020010] peth0: no IPv6 routers present
[   47.492011] eth0: no IPv6 routers present
[   51.579098] device vif2.0 entered promiscuous mode
[   51.587445] eth0: port 3(vif2.0) entering forwarding state
[   51.631688] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.631696] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638956] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638964] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638969] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652791] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652798] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652803] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667481] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667489] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667494] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667499] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   53.136013] vif1.0: no IPv6 routers present
[   53.639012] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   53.705818] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   53.740519] blkback: ring-ref 771, event-channel 11, protocol 1 (x86_32-abi)
[   62.036025] vif2.0: no IPv6 routers present
[   62.310722] device vif3.0 entered promiscuous mode
[   62.315867] eth0: port 4(vif3.0) entering forwarding state
[   62.375734] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375742] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375747] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375752] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395952] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395960] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395966] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395970] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395975] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410288] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410295] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410301] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410306] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410311] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418515] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418523] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418528] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418533] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418537] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418542] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[   65.170413] blkback: ring-ref 768, event-channel 8, protocol 1 (x86_32-abi)
[   65.202538] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_32-abi)
[   65.277096] blkback: ring-ref 773, event-channel 11, protocol 1 (x86_32-abi)
[   72.620013] vif3.0: no IPv6 routers present
[   75.296062] usb 3-2: USB disconnect, address 2
[  175.802781] md: md2: resync done.
[  175.848875] RAID1 conf printout:
[  175.848881]  --- wd:2 rd:2
[  175.848886]  disk 0, wo:0, o:1, dev:sdb3
[  175.848890]  disk 1, wo:0, o:1, dev:sda3
[36395.449702] ata5: exception Emask 0x10 SAct 0x0 SErr 0x1b0000 action 0xe frozen
[36395.449743] ata5: irq_stat 0x04400000, PHY RDY changed
[36395.449767] ata5: SError: { PHYRdyChg PHYInt 10B8B Dispar }
[36395.449795] ata5: hard resetting link
[36398.128029] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36398.130810] ata5.00: configured for UDMA/133
[36398.130816] ata5: EH complete

** Model information
not available

** Loaded modules:
Module                  Size  Used by
xt_tcpudp               1743  3
nf_conntrack_ipv4       7597  6
nf_defrag_ipv4           779  1 nf_conntrack_ipv4
xt_state                 927  6
nf_conntrack           38079  2 nf_conntrack_ipv4,xt_state
xt_physdev              1228  12
iptable_filter          1790  1
ip_tables               7690  1 iptable_filter
x_tables                8327  4 xt_tcpudp,xt_state,xt_physdev,ip_tables
bridge                 33031  0
stp                      996  1 bridge
ppdev                   4058  0
lp                      5570  0
xen_evtchn              3471  4
xenfs                   7248  1
usblp                   7895  0
loop                    9761  0
snd_via82xx            15308  0
gameport                6057  1 snd_via82xx
snd_ac97_codec         79148  1 snd_via82xx
ac97_bus                 710  1 snd_ac97_codec
snd_mpu401_uart         4075  1 snd_via82xx
snd_rawmidi            12513  1 snd_mpu401_uart
snd_pcm                47402  2 snd_via82xx,snd_ac97_codec
snd_seq_device          3673  1 snd_rawmidi
parport_pc             15871  1
snd_timer              12258  1 snd_pcm
snd                    34375  7 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_pcm,snd_seq_device,snd_timer
parport                22554  3 ppdev,lp,parport_pc
i2c_viapro              4431  0
snd_page_alloc          5109  2 snd_via82xx,snd_pcm
k8temp                  2551  0
serio_raw               2916  0
i2c_core               12787  1 i2c_viapro
pcspkr                  1207  0
asus_atk0110            6770  0
evdev                   5609  3
joydev                  6739  0
soundcore               3450  1 snd
shpchp                 21264  0
processor              30865  0
acpi_processor          3623  1 processor,[permanent]
button                  3598  0
pci_hotplug            18065  1 shpchp
reiserfs              176166  2
dm_mod                 46038  30
raid1                  16371  4
md_mod                 67373  5 raid1
sg                     15972  0
sr_mod                 10770  0
cdrom                  26487  1 sr_mod
sd_mod                 26001  10
crc_t10dif              1012  1 sd_mod
ata_generic             2067  0
usbhid                 28052  0
hid                    50905  1 usbhid
ahci                   27286  8
uhci_hcd               16141  0
pata_via                5701  0
thermal                 9206  0
floppy                 40931  0
via_rhine              14951  0
mii                     2714  1 via_rhine
ehci_hcd               29085  0
libata                116053  3 ata_generic,ahci,pata_via
thermal_sys             9378  2 processor,thermal
usbcore                99077  5 usblp,usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
scsi_mod              101425  4 sg,sr_mod,sd_mod,libata

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204]
        Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Region 0: Memory at fa000000 (32-bit, prefetchable) [size=32M]
        Capabilities: <access denied>
        Kernel driver in use: agpgart-amd64

00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204]
        Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204]
        Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204]
        Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204]
        Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:7204]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: fca00000-feafffff
        Prefetchable memory behind bridge: f0900000-f88fffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller [1106:3349] (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller [1106:3349]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin B routed to IRQ 21
        Region 0: I/O ports at ec00 [size=8]
        Region 1: I/O ports at e880 [size=4]
        Region 2: I/O ports at e800 [size=8]
        Region 3: I/O ports at e480 [size=4]
        Region 4: I/O ports at e400 [size=16]
        Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
        Region 4: I/O ports at fc00 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_via

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at e080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at e000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at dc00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 23
        Region 4: I/O ports at d880 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI])
        Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287]
        Subsystem: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 70)
        Subsystem: ASUSTeK Computer Inc. Device [1043:81b9]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 0: I/O ports at d400 [size=256]
        Capabilities: <access denied>
        Kernel driver in use: VIA 82xx Audio

00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
        Subsystem: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 128
        Capabilities: <access denied>

00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
        Subsystem: ASUSTeK Computer Inc. A7V600-X Motherboard [1043:80ed]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 23
        Region 0: I/O ports at d000 [size=256]
        Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: via-rhine

00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 Host Bridge [1106:287b] (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCI to PCI Bridge [1106:287a] (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: k8temp

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] [1106:3108] (rev 01) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8129]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
        Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at feaf0000 [disabled] [size=64K]
        Capabilities: <access denied>

02:00.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287c] (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

02:00.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287d] (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-xen-686 (SMP w/1 CPU core)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to es_AR.UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-xen-686 depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools               0.98.8     tools for generating an initramfs
ii  linux-base                    2.6.32-31  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-xen-686 recommends:
ii  firmware-linux-free           2.6.32-31  Binary firmware for various driver
ii  libc6-xen                     2.11.2-10  Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-xen-686 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-xen-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
ii  xen-hypervisor-4.0-i386 [xen- 4.0.1-2    The Xen Hypervisor on i386

-- debconf information:
  linux-image-2.6.32-5-xen-686/postinst/depmod-error-initrd-2.6.32-5-xen-686: false
  linux-image-2.6.32-5-xen-686/prerm/removing-running-kernel-2.6.32-5-xen-686: true
  linux-image-2.6.32-5-xen-686/postinst/missing-firmware-2.6.32-5-xen-686:
  linux-image-2.6.32-5-xen-686/postinst/ignoring-do-bootloader-2.6.32-5-xen-686:

-------------------------------------------------------------------------------

Hi all!

After upgrading to Squeeze, I am watching a Xen VMHost that after a
while it hangs. This did not happen when I was using Xen with Debian
Lenny (in this case as with Squeeze, the Xen components are from Debian
repositories).

In each case I connected a keyboard and monitor to the computer and the
screen remained black without answering any key. When this happens, I
noticed that the drive activity LED apparently is permanently on.

This problem seems to also affect domUs, because one of them is a DHCP
server and hosts that are configured through it lost their connectivity.

Below I copy the output of dmesg after boot if this can provide some
more information to the problem.

----------------------------------------------------------------------
[    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9
 01:27:54 UTC 2011
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] released 0 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  Xen: 000000000009fc00 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000075fe1000 (usable)
[    0.000000]  Xen: 000000007f7b0000 - 000000007f7be000 (ACPI data)
[    0.000000]  Xen: 000000007f7be000 - 000000007f7e0000 (ACPI NVS)
[    0.000000]  Xen: 000000007f7e0000 - 000000007f800000 (reserved)
[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x75fe1 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 037ff000
[    0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 002cffe000 page 4k
[    0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[    0.000000] RAMDISK: 01651000 - 02d08200
[    0.000000] ACPI: RSDP 000fac60 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 7f7b0100 0003C (v01 A M I  OEMXSDT  11000509 MSFT 00000097)
[    0.000000] ACPI: FACP 7f7b0290 000F4 (v03 A M I  OEMFACP  11000509 MSFT 00000097)
[    0.000000] ACPI: DSDT 7f7b03f0 046FE (v01  A0347 A0347001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 7f7be000 00040
[    0.000000] ACPI: APIC 7f7b0390 0005C (v01 A M I  OEMAPIC  11000509 MSFT 00000097)
[    0.000000] ACPI: OEMB 7f7be040 00046 (v01 A M I  AMI_OEM  11000509 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1167MB HIGHMEM available.
[    0.000000] 719MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2cffe000
[    0.000000]   low ram: 0 - 2cffe000
[    0.000000]   node 0 low ram: 00000000 - 2cffe000
[    0.000000]   node 0 bootmap 00010000 - 00015a00
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 002cffe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0002ee2000 - 0002eff000]   XEN PAGETABLES ==> [0002ee2000 - 0002eff000]
[    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #4 [0001000000 - 000152b8f4]    TEXT DATA BSS ==> [0001000000 - 000152b8f4]
[    0.000000]   #5 [0001651000 - 0002d08200]          RAMDISK ==> [0001651000 - 0002d08200]
[    0.000000]   #6 [0002d09000 - 0002ee2000]   XEN START INFO ==> [0002d09000 - 0002ee2000]
[    0.000000]   #7 [000152c000 - 000152c21c]              BRK ==> [000152c000 - 000152c21c]
[    0.000000]   #8 [0000100000 - 000024f000]          PGTABLE ==> [0000100000 - 000024f000]
[    0.000000]   #9 [0000010000 - 0000016000]          BOOTMAP ==> [0000010000 - 0000016000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002cffe
[    0.000000]   HighMem  0x0002cffe -> 0x00075fe1
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00075fe1
[    0.000000] On node 0 totalpages: 483184
[    0.000000] free_area_init_node: node 0, pgdat c13f4d00, node_mem_map c2eff200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1408 pages used for memmap
[    0.000000]   Normal zone: 178814 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2336 pages used for memmap
[    0.000000]   HighMem zone: 296643 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 256
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @c3dcb000 s37688 r0 d23752 u65536
[    0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] trying to map vcpu_info 0 at c3dcc010, mfn 3bdcc, offset 16
[    0.000000] cpu 0 using vcpu_info at c3dcc010
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 479408
[    0.000000] Kernel command line: placeholder root=UUID=213f474a-b67c-45f7-832f-91c9471e5871 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] DMA: Placing 64MB software IO TLB between c3e9f000 - c7e9f000
[    0.000000] DMA: software IO TLB at phys 0x3e9f000 - 0x7e9f000
[    0.000000] xen_swiotlb_fixup: buf=c3e9f000 size=67108864
[    0.000000] xen_swiotlb_fixup: buf=c7eff000 size=32768
[    0.000000] Initializing HighMem for node 0 (0002cffe:00075fe1)
[    0.000000] Memory: 1817812k/1933188k available (2635k kernel code, 113884k reserved, 1455k data, 404k init, 1195916k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xf5556000 - 0xf57ff000   (2724 kB)
[    0.000000]     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
[    0.000000]     vmalloc : 0xed7fe000 - 0xf4ffe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xecffe000   ( 719 MB)
[    0.000000]       .init : 0xc13ff000 - 0xc1464000   ( 404 kB)
[    0.000000]       .data : 0xc1292d81 - 0xc13feb18   (1455 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1292d81   (2635 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1536
[    0.000000] xen: --> irq=0
[    0.000000] xen: --> irq=1
[    0.000000] xen: --> irq=2
[    0.000000] xen: --> irq=3
[    0.000000] xen: --> irq=4
[    0.000000] xen: --> irq=5
[    0.000000] xen: --> irq=6
[    0.000000] xen: --> irq=7
[    0.000000] xen: --> irq=8
[    0.000000] xen: --> irq=9
[    0.000000] xen: --> irq=10
[    0.000000] xen: --> irq=11
[    0.000000] xen: --> irq=12
[    0.000000] xen: --> irq=13
[    0.000000] xen: --> irq=14
[    0.000000] xen: --> irq=15
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[    0.000000] xen: registering gsi 9 triggering 0 polarity 1
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] xen: --> irq=9
[    0.000000] xen: acpi sci 9
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2200.196 MHz processor.
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.39 BogoMIPS (lpj=8800784)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] mce: CPU supports 5 MCE banks
[    0.004000] Performance Events: AMD PMU driver.
[    0.004000] ------------[ cut here ]------------
[    0.004000] WARNING: at
+/build/buildd-linux-2.6_2.6.32-31-i386-qYaaJr/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:726
+perf_events_lapic_init+0x28/0x29()
[    0.004000] Hardware name: System Product Name
[    0.004000] Modules linked in:
[    0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1
[    0.004000] Call Trace:
[    0.004000]  [<c1037799>] ? warn_slowpath_common+0x5e/0x8a
[    0.004000]  [<c10377cf>] ? warn_slowpath_null+0xa/0xc
[    0.004000]  [<c1011cdc>] ? perf_events_lapic_init+0x28/0x29
[    0.004000]  [<c14073d9>] ? init_hw_perf_events+0x2dd/0x376
[    0.004000]  [<c140702c>] ? check_bugs+0x8/0xd8
[    0.004000]  [<c13ff808>] ? start_kernel+0x309/0x31d
[    0.004000]  [<c1401410>] ? xen_start_kernel+0x564/0x56b
[    0.004000]  [<c1409046>] ? mtrr_cleanup+0x341/0x3eb
[    0.004000] ---[ end trace a7919e7f17c0a725 ]---
[    0.004000] ... version:                0
[    0.004000] ... bit width:              48
[    0.004000] ... generic registers:      4
[    0.004000] ... value mask:             0000ffffffffffff
[    0.004000] ... max period:             00007fffffffffff
[    0.004000] ... fixed-purpose events:   0
[    0.004000] ... event mask:             000000000000000f
[    0.004000] SMP alternatives: switching to UP code
[    0.004000] Freeing SMP alternatives: 14k freed
[    0.004000] ACPI: Core revision 20090903
[    0.012300] Brought up 1 CPUs
[    0.012311] CPU0 attaching NULL sched-domain.
[    0.012449] devtmpfs: initialized
[    0.013020] Grant table initialized
[    0.013023] regulator: core version 0.5
[    0.013093] NET: Registered protocol family 16
[    0.013288] ACPI: bus type pci registered
[    0.013313] sync cpu 0 get result 1 max_id 0
[    0.014149] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.014153] PCI: Using configuration type 1 for base access
[    0.014788] bio: create slab <bio-0> at 0
[    0.016507] ERROR: Unable to locate IOAPIC for GSI 9
[    0.016574] ACPI: EC: Look up EC in DSDT
[    0.022119] ACPI: Executed 1 blocks of module-level executable AML code
[    0.030087] ACPI: Interpreter enabled
[    0.030092] ACPI: (supports S0 S1 S3 S4 S5)
[    0.030146] ACPI: Using IOAPIC for interrupt routing
[    0.044949] ACPI Warning: Incorrect checksum in table [OEMB] - 28, should be 23 (20090903/tbutils-314)
[    0.045249] ACPI: No dock devices found.
[    0.045412] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.045495] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xfa000000-0xfbffffff]
[    0.046203] pci 0000:00:01.0: supports D1
[    0.046312] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[    0.046325] pci 0000:00:0f.0: reg 14 io port: [0xe880-0xe883]
[    0.046338] pci 0000:00:0f.0: reg 18 io port: [0xe800-0xe807]
[    0.046350] pci 0000:00:0f.0: reg 1c io port: [0xe480-0xe483]
[    0.046363] pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
[    0.046376] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfebffc00-0xfebfffff]
[    0.046433] pci 0000:00:0f.0: PME# supported from D3hot
[    0.046441] pci 0000:00:0f.0: PME# disabled
[    0.046541] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.046705] pci 0000:00:10.0: reg 20 io port: [0xe080-0xe09f]
[    0.046757] pci 0000:00:10.0: supports D1 D2
[    0.046761] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046768] pci 0000:00:10.0: PME# disabled
[    0.046864] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f]
[    0.046917] pci 0000:00:10.1: supports D1 D2
[    0.046921] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046928] pci 0000:00:10.1: PME# disabled
[    0.047025] pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f]
[    0.047077] pci 0000:00:10.2: supports D1 D2
[    0.047080] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047088] pci 0000:00:10.2: PME# disabled
[    0.047184] pci 0000:00:10.3: reg 20 io port: [0xd880-0xd89f]
[    0.047237] pci 0000:00:10.3: supports D1 D2
[    0.047240] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047248] pci 0000:00:10.3: PME# disabled
[    0.047324] pci 0000:00:10.4: reg 10 32bit mmio: [0xfebff800-0xfebff8ff]
[    0.047420] pci 0000:00:10.4: supports D1 D2
[    0.047423] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047431] pci 0000:00:10.4: PME# disabled
[    0.047662] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff]
[    0.047750] pci 0000:00:11.5: supports D1 D2
[    0.047931] pci 0000:00:12.0: reg 10 io port: [0xd000-0xd0ff]
[    0.047944] pci 0000:00:12.0: reg 14 32bit mmio: [0xfebff400-0xfebff4ff]
[    0.048027] pci 0000:00:12.0: supports D1 D2
[    0.048030] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.048038] pci 0000:00:12.0: PME# disabled
[    0.048545] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[    0.048556] pci 0000:01:00.0: reg 14 32bit mmio: [0xfd000000-0xfdffffff]
[    0.048596] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff]
[    0.048634] pci 0000:01:00.0: supports D1 D2
[    0.048731] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[    0.048739] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0900000-0xf88fffff]
[    0.048848] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.048856] pci 0000:02:00.0: PME# disabled
[    0.048972] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.048980] pci 0000:02:00.1: PME# disabled
[    0.049023] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.049444] pci_bus 0000:00: on NUMA node 0
[    0.049450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.049743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.049862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.049970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[    0.050078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[    0.050179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.085170] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.085325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.085477] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.085629] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.085780] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.085935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.086089] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.086244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.086351] xen_balloon: Initialising balloon driver with page order 0.
[    0.086450] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.086456] vgaarb: loaded
[    0.086564] PCI: Using ACPI for IRQ routing
[    0.086903] Switching to clocksource xen
[    0.088001] pnp: PnP ACPI init
[    0.088001] ACPI: bus type pnp registered
[    0.088001] xen: registering gsi 8 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.088001] xen: --> irq=8
[    0.088001] xen: registering gsi 13 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.088001] xen: --> irq=13
[    0.088001] xen: registering gsi 6 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 6 for gsi 6
[    0.088001] xen: --> irq=6
[    0.088607] xen: registering gsi 7 triggering 1 polarity 0
[    0.088611] xen_allocate_pirq: returning irq 7 for gsi 7
[    0.088614] xen: --> irq=7
[    0.089450] pnp 00:08: mem resource (0xf0000000-0xf7ffffff) overlaps 0000:00:01.0 BAR 15 (0xf0900000-0xf88fffff), disabling
[    0.089811] xen: registering gsi 1 triggering 1 polarity 0
[    0.089815] xen_allocate_pirq: returning irq 1 for gsi 1
[    0.089818] xen: --> irq=1
[    0.090696] xen: registering gsi 4 triggering 1 polarity 0
[    0.090699] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.090702] xen: --> irq=4
[    0.092458] pnp: PnP ACPI: found 14 devices
[    0.092461] ACPI: ACPI bus type pnp unregistered
[    0.092466] PnPBIOS: Disabled
[    0.092480] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.092490] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
[    0.092495] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.092500] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.092504] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.092510] system 00:08: iomem range 0xff780000-0xffffffff has been reserved
[    0.092520] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.092525] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.092534] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.092543] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.092548] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.092554] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[    0.096591] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    0.096655] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.096658] pci 0000:00:01.0:   IO window: disabled
[    0.096668] pci 0000:00:01.0:   MEM window: 0xfca00000-0xfeafffff
[    0.096676] pci 0000:00:01.0:   PREFETCH window: 0xf0900000-0xf88fffff
[    0.096687] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[    0.096691] pci 0000:02:00.0:   IO window: disabled
[    0.096700] pci 0000:02:00.0:   MEM window: disabled
[    0.096706] pci 0000:02:00.0:   PREFETCH window: disabled
[    0.096718] pci 0000:02:00.1: PCI bridge, secondary bus 0000:04
[    0.096721] pci 0000:02:00.1:   IO window: disabled
[    0.096730] pci 0000:02:00.1:   MEM window: disabled
[    0.096736] pci 0000:02:00.1:   PREFETCH window: disabled
[    0.096747] pci 0000:00:13.0: PCI bridge, secondary bus 0000:02
[    0.096750] pci 0000:00:13.0:   IO window: disabled
[    0.096759] pci 0000:00:13.0:   MEM window: disabled
[    0.096765] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.096776] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[    0.096779] pci 0000:00:13.1:   IO window: disabled
[    0.096788] pci 0000:00:13.1:   MEM window: disabled
[    0.096795] pci 0000:00:13.1:   PREFETCH window: disabled
[    0.096822] pci 0000:00:01.0: setting latency timer to 64
[    0.096836] pci 0000:00:13.0: setting latency timer to 64
[    0.096855] pci 0000:02:00.0: setting latency timer to 64
[    0.096874] pci 0000:02:00.1: setting latency timer to 64
[    0.096887] pci 0000:00:13.1: setting latency timer to 64
[    0.096894] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.096898] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.096902] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff]
[    0.096906] pci_bus 0000:01: resource 2 pref mem [0xf0900000-0xf88fffff]
[    0.096941] NET: Registered protocol family 2
[    0.097027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.097360] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.098056] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.098430] TCP: Hash tables configured (established 131072 bind 65536)
[    0.098434] TCP reno registered
[    0.098536] NET: Registered protocol family 1
[    0.098553] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.098567] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.098730] pci 0000:01:00.0: Boot video device
[    0.098798] Unpacking initramfs...
[    0.177087] Freeing initrd memory: 23260k freed
[    0.193346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.193353] DMA: Placing 64MB software IO TLB between c3e9f000 - c7e9f000
[    0.193357] DMA: software IO TLB at phys 0x3e9f000 - 0x7e9f000
[    0.193709] audit: initializing netlink socket (disabled)
[    0.193725] type=2000 audit(1302441508.192:1): initialized
[    0.197184] highmem bounce pool size: 64 pages
[    0.197191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.199040] VFS: Disk quotas dquot_6.5.2
[    0.199107] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.199210] msgmni has been set to 1262
[    0.199444] alg: No test for stdrng (krng)
[    0.199510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.199514] io scheduler noop registered
[    0.199517] io scheduler anticipatory registered
[    0.199520] io scheduler deadline registered
[    0.199565] io scheduler cfq registered (default)
[    0.200022] isapnp: Scanning for PnP cards...
[    0.555426] isapnp: No Plug & Play device found
[    0.560248] registering netback
[    0.562247] Linux agpgart interface v0.103
[    0.562315] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    0.563490] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xfa000000
[    0.563608] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.563757] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.564207] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.564362] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.564366] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.564544] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.564664] mice: PS/2 mouse device common for all mice
[    0.564735] rtc_cmos 00:02: RTC can wake from S4
[    0.564790] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.564838] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.564854] cpuidle: using governor ladder
[    0.564857] cpuidle: using governor menu
[    0.564863] No iBFT detected.
[    0.565194] TCP cubic registered
[    0.565369] NET: Registered protocol family 10
[    0.566108] Mobile IPv6
[    0.566112] NET: Registered protocol family 17
[    0.566129] Using IPI No-Shortcut mode
[    0.566208] PM: Resume from disk failed.
[    0.566222] registered taskstats version 1
[    0.566832] rtc_cmos 00:02: setting system clock to 2011-04-10 13:18:27 UTC (1302441507)
[    0.566893] Initalizing network drop monitor service
[    0.566943] Freeing unused kernel memory: 404k freed
[    0.567983] Write protecting the kernel text: 2636k
[    0.568331] Write protecting the kernel read-only data: 968k
[    0.616309] udev[51]: starting version 164
[    1.101966] SCSI subsystem initialized
[    1.135291] usbcore: registered new interface driver usbfs
[    1.135552] usbcore: registered new interface driver hub
[    1.135827] usbcore: registered new device driver usb
[    1.144316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.144359] xen: registering gsi 22 triggering 0 polarity 1
[    1.144376] xen: --> irq=22
[    1.144387] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.144414] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    1.144441] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.144514] ehci_hcd 0000:00:10.4: debug port 1
[    1.144554] ehci_hcd 0000:00:10.4: irq 22, io mem 0xfebff800
[    1.151455] Floppy drive(s): fd0 is 1.44M
[    1.152340] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.152369] libata version 3.00 loaded.
[    1.156062] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.156116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.156120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.156124] usb usb1: Product: EHCI Host Controller
[    1.156127] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[    1.156130] usb usb1: SerialNumber: 0000:00:10.4
[    1.156337] usb usb1: configuration #1 chosen from 1 choice
[    1.156464] hub 1-0:1.0: USB hub found
[    1.156498] hub 1-0:1.0: 8 ports detected
[    1.157908] xen: registering gsi 23 triggering 0 polarity 1
[    1.157927] xen: --> irq=23
[    1.157938] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.158708] eth0: VIA Rhine II at 0x1d000, 00:17:31:33:82:63, IRQ 23.
[    1.159457] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[    1.159774] pata_via 0000:00:0f.1: version 0.3.4
[    1.162875] scsi0 : pata_via
[    1.163687] scsi1 : pata_via
[    1.167751] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.167756] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.172057] FDC 0 is a post-1991 82077
[    1.215397] uhci_hcd: USB Universal Host Controller Interface driver
[    1.215460] xen: registering gsi 20 triggering 0 polarity 1
[    1.215479] xen: --> irq=20
[    1.215490] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.215503] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.215519] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.215581] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
[    1.215670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.215674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.215678] usb usb2: Product: UHCI Host Controller
[    1.215681] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.215684] usb usb2: SerialNumber: 0000:00:10.0
[    1.215895] usb usb2: configuration #1 chosen from 1 choice
[    1.216054] hub 2-0:1.0: USB hub found
[    1.216074] hub 2-0:1.0: 2 ports detected
[    1.216154] xen: registering gsi 22 triggering 0 polarity 1
[    1.216158] xen_allocate_pirq: returning irq 22 for gsi 22
[    1.216161] xen: --> irq=22
[    1.216165] Already setup the GSI :22
[    1.216170] uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.216180] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.216189] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.216224] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e000
[    1.216299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.216303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.216306] usb usb3: Product: UHCI Host Controller
[    1.216310] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.216313] usb usb3: SerialNumber: 0000:00:10.1
[    1.216485] usb usb3: configuration #1 chosen from 1 choice
[    1.216609] hub 3-0:1.0: USB hub found
[    1.216628] hub 3-0:1.0: 2 ports detected
[    1.216701] xen: registering gsi 21 triggering 0 polarity 1
[    1.216714] xen: --> irq=21
[    1.216721] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.216731] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.216741] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.216793] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[    1.216867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.216871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.216875] usb usb4: Product: UHCI Host Controller
[    1.216878] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.216882] usb usb4: SerialNumber: 0000:00:10.2
[    1.217055] usb usb4: configuration #1 chosen from 1 choice
[    1.217178] hub 4-0:1.0: USB hub found
[    1.217197] hub 4-0:1.0: 2 ports detected
[    1.217269] xen: registering gsi 23 triggering 0 polarity 1
[    1.217273] xen_allocate_pirq: returning irq 23 for gsi 23
[    1.217276] xen: --> irq=23
[    1.217280] Already setup the GSI :23
[    1.217284] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.217294] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.217307] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.217354] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d880
[    1.217427] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.217431] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.217435] usb usb5: Product: UHCI Host Controller
[    1.217439] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.217442] usb usb5: SerialNumber: 0000:00:10.3
[    1.217613] usb usb5: configuration #1 chosen from 1 choice
[    1.217750] hub 5-0:1.0: USB hub found
[    1.217769] hub 5-0:1.0: 2 ports detected
[    1.255602] ahci 0000:00:0f.0: version 3.0
[    1.255628] xen: registering gsi 21 triggering 0 polarity 1
[    1.255632] xen_allocate_pirq: returning irq 21 for gsi 21
[    1.255636] xen: --> irq=21
[    1.255642] Already setup the GSI :21
[    1.255647] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.255699] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[    1.255703] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[    1.255756] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[    1.255785] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    1.255790] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[    1.261452] scsi2 : ahci
[    1.261728] scsi3 : ahci
[    1.261914] scsi4 : ahci
[    1.262104] scsi5 : ahci
[    1.263041] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 21
[    1.263046] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 21
[    1.263050] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[    1.263055] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[    1.500432] ata2.00: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS05, max UDMA/33
[    1.508349] ata2.00: configured for UDMA/33
[    1.510125] scsi 1:0:0:0: CD-ROM            TSSTcorp CD-R/RW SH-R522C TS05 PQ: 0 ANSI: 5
[    1.580029] ata3: SATA link down (SStatus 0 SControl 300)
[    1.580052] ata4: SATA link down (SStatus 0 SControl 300)
[    1.660024] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.817305] usb 3-2: New USB device found, idVendor=0566, idProduct=3107
[    1.817309] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.817393] usb 3-2: configuration #1 chosen from 1 choice
[    1.938564] usbcore: registered new interface driver hiddev
[    1.951806] input: HID 0566:3107 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input0
[    1.951959] generic-usb 0003:0566:3107.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:10.1-2/input0
[    1.975530] input: HID 0566:3107 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input1
[    1.975663] generic-usb 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:10.1-2/input1
[    1.975694] usbcore: registered new interface driver usbhid
[    1.975974] usbhid: v2.6:USB HID core driver
[    2.148024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.148047] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.148601] ata5.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[    2.148605] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.148636] ata6.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[    2.148640] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.149369] ata5.00: configured for UDMA/133
[    2.149397] ata6.00: configured for UDMA/133
[    2.164151] scsi 4:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
[    2.164428] scsi 5:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
[    2.214997] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.215104] sd 4:0:0:0: [sda] Write Protect is off
[    2.215109] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.215154] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.215388]  sda:
[    2.215603] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.215707] sd 5:0:0:0: [sdb] Write Protect is off
[    2.215711] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.215756] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.215981]  sdb:sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[    2.221005] Uniform CD-ROM driver Revision: 3.20
[    2.221490] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.223489]  sda1 sda2 sda3 sda4
[    2.224534] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.225119]  sdb1 sdb2 sdb3 sdb4
[    2.226074] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.249231] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.250354] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.250938] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.528108] md: raid1 personality registered for level 1
[    2.606725] md: md0 stopped.
[    2.616176] md: bind<sda1>
[    2.616506] md: bind<sdb1>
[    2.620511] raid1: raid set md0 active with 2 out of 2 mirrors
[    2.620544] md0: detected capacity change from 0 to 1003356160
[    2.623898]  md0: unknown partition table
[    2.691270] md: md1 stopped.
[    2.728890] md: bind<sda2>
[    2.729050] md: bind<sdb2>
[    2.731836] raid1: raid set md1 active with 2 out of 2 mirrors
[    2.731868] md1: detected capacity change from 0 to 98631680
[    2.735217]  md1:
[    2.886983] md: md2 stopped.
[    2.925192] md: bind<sda3>
[    2.925359] md: bind<sdb3>
[    2.928243] raid1: md2 is not clean -- starting background reconstruction
[    2.928248] raid1: raid set md2 active with 2 out of 2 mirrors
[    2.928279] md2: detected capacity change from 0 to 1998651392
[    2.931703]  md2: unknown partition table
[    2.990009] md: md3 stopped.
[    3.066355] md: bind<sda4>
[    3.066485] md: bind<sdb4>
[    3.069392] raid1: raid set md3 active with 2 out of 2 mirrors
[    3.069428] md3: detected capacity change from 0 to 246955704320
[    3.072519]  md3: unknown partition table
[    3.093845] device-mapper: uevent: version 1.0.3
[    3.094704] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    3.157175] PM: Starting manual resume from disk
[    3.157181] PM: Resume from partition 9:0
[    3.157184] PM: Checking hibernation image.
[    3.183263] PM: Error -22 checking image file
[    3.183266] PM: Resume from disk failed.
[    3.201277] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[    3.201291] REISERFS (device md2): using ordered data mode
[    3.205339] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max
+commit age 30, max trans age 30
[    3.206102] REISERFS (device md2): checking transaction log (md2)
[    3.258171] md: resync of RAID array md2
[    3.258175] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
[    3.258178] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[    3.258183] md: using 128k window, over a total of 1951808 blocks.
[   21.805419] REISERFS (device md2): replayed 1673 transactions in 18 seconds
[   21.838457] REISERFS (device md2): Using r5 hash to sort names
[   22.888068] udev[380]: starting version 164
[   23.210776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   23.217141] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[   23.217158] ACPI: Sleep Button [SLPB]
[   23.217250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   23.217260] ACPI: Power Button [PWRB]
[   23.217334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   23.217339] ACPI: Power Button [PWRF]
[   23.363101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.900827] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   24.426262] parport_pc 00:06: reported by Plug and Play ACPI
[   24.426427] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   24.553014] Error: Driver 'pcspkr' is already registered, aborting...
[   24.758132] xen: registering gsi 22 triggering 0 polarity 1
[   24.758138] xen_allocate_pirq: returning irq 22 for gsi 22
[   24.758141] xen: --> irq=22
[   24.758148] Already setup the GSI :22
[   24.758153] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   24.758304] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   27.630643] Adding 979832k swap on /dev/md0.  Priority:-1 extents:1 across:979832k
[   27.878666] loop: module loaded
[   28.022223] usbcore: registered new interface driver usblp
[   30.296015] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[   30.296038] REISERFS (device md1): using ordered data mode
[   30.301804] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max
+commit age 30, max trans age 30
[   30.302288] REISERFS (device md1): checking transaction log (md1)
[   30.334588] REISERFS (device md1): Using r5 hash to sort names
[   30.842588] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   32.136579] Event-channel device installed.
[   32.304384] lp0: using parport0 (interrupt-driven).
[   32.516899] ppdev: user-space parallel port driver
[   32.767175] XENBUS: Unable to read cpu state
[   35.803063] Bridge firewalling registered
[   36.638358] peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.659625] device peth0 entered promiscuous mode
[   36.676708] eth0: port 1(peth0) entering forwarding state
[   42.223388] device vif1.0 entered promiscuous mode
[   42.229774] eth0: port 2(vif1.0) entering forwarding state
[   42.341550] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.418204] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   42.418810] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   42.418814] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   42.418818] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   42.442587] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   42.461135] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   42.464470] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   42.464477] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   44.548240] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   44.584287] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   47.020010] peth0: no IPv6 routers present
[   47.492011] eth0: no IPv6 routers present
[   51.579098] device vif2.0 entered promiscuous mode
[   51.587445] eth0: port 3(vif2.0) entering forwarding state
[   51.631688] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.631696] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.638956] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.638964] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.638969] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.652791] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.652798] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.652803] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.667481] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.667489] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.667494] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   51.667499] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   53.136013] vif1.0: no IPv6 routers present
[   53.639012] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   53.705818] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   53.740519] blkback: ring-ref 771, event-channel 11, protocol 1 (x86_32-abi)
[   62.036025] vif2.0: no IPv6 routers present
[   62.310722] device vif3.0 entered promiscuous mode
[   62.315867] eth0: port 4(vif3.0) entering forwarding state
[   62.375734] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.375742] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.375747] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.375752] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.395952] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.395960] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.395966] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.395970] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.395975] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.410288] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.410295] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.410301] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.410306] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.410311] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418515] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418523] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418528] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418533] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418537] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   62.418542] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported
+anymore.
[   65.170413] blkback: ring-ref 768, event-channel 8, protocol 1 (x86_32-abi)
[   65.202538] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_32-abi)
[   65.277096] blkback: ring-ref 773, event-channel 11, protocol 1 (x86_32-abi)
[   72.620013] vif3.0: no IPv6 routers present
[   75.296062] usb 3-2: USB disconnect, address 2
[  175.802781] md: md2: resync done.
[  175.848875] RAID1 conf printout:
[  175.848881]  --- wd:2 rd:2
[  175.848886]  disk 0, wo:0, o:1, dev:sdb3
[  175.848890]  disk 1, wo:0, o:1, dev:sda3

----------------------------------------------------------------------

In particular, I noticed the following lines:

----------------------------------------------------------------------
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9

[    0.004000] ------------[ cut here ]------------
[    0.004000] WARNING: at /build/buildd-linux-2.6_2.6.32-31-i386-qYaaJr/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten
.c:726 perf_events_lapic_init+0x28/0x29()
[    0.004000] Hardware name: System Product Name
[    0.004000] Modules linked in:
[    0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1
[    0.004000] Call Trace:
[    0.004000]  [<c1037799>] ? warn_slowpath_common+0x5e/0x8a
[    0.004000]  [<c10377cf>] ? warn_slowpath_null+0xa/0xc
[    0.004000]  [<c1011cdc>] ? perf_events_lapic_init+0x28/0x29
[    0.004000]  [<c14073d9>] ? init_hw_perf_events+0x2dd/0x376
[    0.004000]  [<c140702c>] ? check_bugs+0x8/0xd8
[    0.004000]  [<c13ff808>] ? start_kernel+0x309/0x31d
[    0.004000]  [<c1401410>] ? xen_start_kernel+0x564/0x56b
[    0.004000]  [<c1409046>] ? mtrr_cleanup+0x341/0x3eb
[    0.004000] ---[ end trace a7919e7f17c0a725 ]---

[    0.016507] ERROR: Unable to locate IOAPIC for GSI 9
[   32.767175] XENBUS: Unable to read cpu state
----------------------------------------------------------------------


Thanks in advance for your replies.

Regards,
Daniel
-- 
Daniel Bareiro - GNU/Linux registered user #188.598
Proudly running Debian GNU/Linux with uptime:
23:57:09 up 46 days,  4:51, 12 users,  load average: 0.13, 0.07, 0.01

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: