--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.38-2-amd64: kernel 2.6.38-2 reports Hardware errors about cache and copyback
- From: Ernesto Cuconato <e.cuconato@gmail.com>
- Date: Sun, 10 Apr 2011 13:49:12 +0200
- Message-id: <BANLkTiksEcOg-GMobX6XeaW3eMxWMEYW=A@mail.gmail.com>
Package: linux-2.6
Version: 2.6.38-3
Severity: normal
Message from syslogd@Lenin at Apr 10 13:19:17 ...
kernel:[ 2869.300019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
Message from syslogd@Lenin at Apr 10 13:19:54 ...
kernel:[ 2906.788012] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]:
0x9400000000000151
Message from syslogd@Lenin at Apr 10 13:19:54 ...
kernel:[ 2906.788016] [Hardware Error]: Instruction Cache Error: Parity error
during data load.
Message from syslogd@Lenin at Apr 10 13:19:54 ...
kernel:[ 2906.788019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
Message from syslogd@Lenin at Apr 10 13:24:35 ...
kernel:[ 3187.948018] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]:
0x943ac00000000136
Message from syslogd@Lenin at Apr 10 13:24:35 ...
kernel:[ 3187.948022] [Hardware Error]: Data Cache Error: during L1 linefill
from L2.
Message from syslogd@Lenin at Apr 10 13:24:35 ...
kernel:[ 3187.948025] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
Message from syslogd@Lenin at Apr 10 13:25:50 ...
kernel:[ 3262.924013] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]:
0x940040000000017a
Message from syslogd@Lenin at Apr 10 13:25:50 ...
kernel:[ 3262.924017] [Hardware Error]: Bus Unit Error: EV error during data
copyback.
Message from syslogd@Lenin at Apr 10 13:25:50 ...
kernel:[ 3262.924020] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 06:43:20 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=9ce15fe4-952c-4943-8965-4d004b2381b0 ro quiet
** Tainted: M (16)
* System experienced a machine check exception.
** Kernel log:
[ 688.794986] device-mapper: uevent: version 1.0.3
[ 688.795193] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 692.273365] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 692.274555] SGI XFS Quota Management subsystem
[ 692.326222] JFS: nTxBlock = 8192, nTxLock = 65536
[ 692.395107] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 692.424277] QNX4 filesystem 0.2.3 registered.
[ 692.464041] Btrfs loaded
[ 900.804011] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 900.804016] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 900.804018] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 900.804021] Disabling lock debugging due to kernel taint
[ 900.804023] [Hardware Error]: Machine check events logged
[ 1050.804016] [Hardware Error]: MC1_STATUS[Over|CE|-|-|AddrV]: 0xd400000000000151
[ 1050.804021] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1050.804023] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1050.804027] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 1050.804029] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 1050.804031] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 1050.804035] [Hardware Error]: Machine check events logged
[ 1275.804012] [Hardware Error]: MC1_STATUS[Over|CE|-|-|AddrV]: 0xd400000000000151
[ 1275.804016] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1275.804019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1275.804023] [Hardware Error]: Machine check events logged
[ 1800.804019] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 1800.804023] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 1800.804026] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 1800.804030] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 1800.804031] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1800.804034] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1800.804037] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV]: 0x940000000000017a
[ 1800.804038] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 1800.804040] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 1800.804043] [Hardware Error]: Machine check events logged
[ 1888.537887] reportbug[4653] trap divide error ip:f68d3a62 sp:f5f14730 error:0 in libgtk-x11-2.0.so.0.2400.3[f67a2000+3dd000]
[ 1950.804013] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 1950.804017] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1950.804020] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1950.804024] [Hardware Error]: Machine check events logged
[ 2025.804014] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2025.804019] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2025.804021] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2025.804025] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2025.804027] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2025.804029] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2025.804031] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000018a
[ 2025.804033] [Hardware Error]: Bus Unit Error: SNP error during data copyback.
[ 2025.804036] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: SNP
[ 2025.804038] [Hardware Error]: Machine check events logged
[ 2063.304013] [Hardware Error]: MC0_STATUS[Over|CE|-|-|AddrV|CECC]: 0xd43ac00000000136
[ 2063.304018] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2063.304020] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2063.304024] [Hardware Error]: Machine check events logged
[ 2082.052020] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2082.052025] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2082.052028] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2110.168015] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 2110.168020] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 2110.168023] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 2250.748019] [Hardware Error]: MC1_STATUS[Over|CE|-|-|-]: 0xd000000000000171
[ 2250.748023] [Hardware Error]: Instruction Cache Error: Copyback Parity/Victim error.
[ 2250.748026] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: EV
[ 2250.748031] mce_notify_irq: 2 callbacks suppressed
[ 2250.748032] [Hardware Error]: Machine check events logged
[ 2288.236017] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2288.236022] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2288.236025] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2288.236029] [Hardware Error]: Machine check events logged
[ 2569.396013] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 2569.396018] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 2569.396021] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 2569.396025] [Hardware Error]: Machine check events logged
[ 2644.372017] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2644.372022] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2644.372024] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2644.372028] [Hardware Error]: Machine check events logged
[ 2681.860016] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2681.860021] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2681.860023] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2738.092013] [Hardware Error]: MC1_STATUS[-|CE|-|-|-]: 0x9000000000000171
[ 2738.092017] [Hardware Error]: Instruction Cache Error: Copyback Parity/Victim error.
[ 2738.092020] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: EV
[ 2738.092024] mce_notify_irq: 1 callbacks suppressed
[ 2738.092026] [Hardware Error]: Machine check events logged
[ 2869.300012] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2869.300017] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2869.300019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2869.300023] [Hardware Error]: Machine check events logged
[ 2906.788012] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2906.788016] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2906.788019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 3187.948018] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 3187.948022] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 3187.948025] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 3187.948029] mce_notify_irq: 1 callbacks suppressed
[ 3187.948031] [Hardware Error]: Machine check events logged
[ 3262.924013] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 3262.924017] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 3262.924020] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 3262.924024] [Hardware Error]: Machine check events logged
** Model information
sys_vendor: BIOSTAR Group
product_name: A780G M2+ SE
product_version: 6.0
chassis_vendor: BIOSTAR Group
chassis_version: 6.0
bios_vendor: American Megatrends Inc.
bios_version: 080014
board_vendor: BIOSTAR Group
board_name: A780G M2+ SE
board_version: 6.0
** Loaded modules:
Module Size Used by
btrfs 428766 0
zlib_deflate 25466 1 btrfs
crc32c 12656 1
libcrc32c 12426 1 btrfs
ufs 61682 0
qnx4 13184 0
hfsplus 71274 0
hfs 45666 0
minix 27349 0
ntfs 162694 0
vfat 17165 0
msdos 17070 0
fat 45206 2 vfat,msdos
jfs 140566 0
xfs 603664 0
exportfs 12591 1 xfs
reiserfs 198112 0
ext4 285166 0
jbd2 65157 1 ext4
crc16 12343 1 ext4
ext2 62796 0
dm_mod 62467 0
ppdev 12725 0
lp 17190 0
kvm_amd 50543 0
binfmt_misc 12914 1
kvm 259192 1 kvm_amd
fuse 61520 5
hwmon_vid 12388 0
loop 22515 0
radeon 717227 3
snd_hda_codec_realtek 283856 1
snd_hda_intel 25946 3
ttm 52155 1 radeon
snd_hda_codec 63551 2 snd_hda_codec_realtek,snd_hda_intel
drm_kms_helper 26893 1 radeon
drm 165567 5 radeon,ttm,drm_kms_helper
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67327 3 snd_hda_intel,snd_hda_codec
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
tpm_tis 13125 0
tpm 17726 1 tpm_tis
snd 52280 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
tpm_bios 12903 1 tpm
edac_core 35344 0
i2c_piix4 12536 0
i2c_algo_bit 12834 1 radeon
i2c_core 19629 5 radeon,drm_kms_helper,drm,i2c_piix4,i2c_algo_bit
pcspkr 12579 0
parport_pc 22191 1
soundcore 13014 1 snd
edac_mce_amd 17103 0
parport 31650 3 ppdev,lp,parport_pc
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
power_supply 13475 1 radeon
evdev 17475 7
processor 27431 0
k10temp 12611 0
button 12994 0
wmi 13202 0
ext3 112218 1
jbd 41698 1 ext3
mbcache 12930 3 ext4,ext2,ext3
sg 25769 0
sr_mod 21824 0
sd_mod 35501 3
usbhid 39900 0
cdrom 35134 1 sr_mod
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
hid 72616 1 usbhid
pata_atiixp 12689 0
ohci_hcd 26400 0
ahci 25089 3
libahci 22568 1 ahci
ehci_hcd 39529 0
libata 147240 4 ata_generic,pata_atiixp,ahci,libahci
r8169 37209 0
usbcore 122908 4 usbhid,ohci_hcd,ehci_hcd
thermal 17330 0
thermal_sys 17939 2 processor,thermal
floppy 56861 0
scsi_mod 161457 4 sg,sr_mod,sd_mod,libata
mii 12634 1 r8169
nls_base 12753 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe9ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe9fa800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Biostar Microtech Int'l Corp Device [1565:8218]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9f9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] [1002:7187] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:0840]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) [1002:71a7]
Subsystem: PC Partner Limited Device [174b:0841]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at feae0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device [1565:2307]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04b8:011f Seiko Epson Corp. Perfection 1670
Bus 004 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (800, 'stable'), (750, 'unstable'), (700, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
uname -a
Linux Lenin 2.6.38-2-amd64 #1 SMP Thu Apr 7 06:43:20 UTC 2011 x86_64 GNU/Linux
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 06:43:20 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=9ce15fe4-952c-4943-8965-4d004b2381b0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000cffee000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: BIOSTAR Group A780G M2+ SE/A780G M2+ SE, BIOS 080014 07/28/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffb0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cffae000-cffb0000
[ 0.000000] RAMDISK: 376dc000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fa330 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cffb0000 0003C (v01 072809 RSDT1327 20090728 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0200 00084 (v02 072809 FACP1327 20090728 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffb0440 07250 (v01 A78GM A78GM728 00000004 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffbe000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 0006C (v01 072809 APIC1327 20090728 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0400 0003C (v01 072809 OEMMCFG 20090728 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffbe040 00071 (v01 072809 OEMB1327 20090728 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffb7690 00038 (v01 072809 OEMHPET 20090728 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffb76d0 002B4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffb0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048383
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
[ 0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000
[ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s82752 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031353
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=9ce15fe4-952c-4943-8965-4d004b2381b0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ e1c0000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3984244k/4980736k available (3240k kernel code, 787204k absent, 209288k reserved, 3445k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3080.985 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6161.97 BogoMIPS (lpj=12323940)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004027] Security Framework initialized
[ 0.004031] SELinux: Disabled at boot.
[ 0.004286] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008431] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009049] Mount-cache hash table entries: 256
[ 0.009162] Initializing cgroup subsys ns
[ 0.009165] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009167] Initializing cgroup subsys cpuacct
[ 0.009171] Initializing cgroup subsys devices
[ 0.009173] Initializing cgroup subsys freezer
[ 0.009175] Initializing cgroup subsys net_cls
[ 0.009177] Initializing cgroup subsys blkio
[ 0.009203] tseg: 0000000000
[ 0.009213] CPU: Physical Processor ID: 0
[ 0.009215] CPU: Processor Core ID: 0
[ 0.009216] mce: CPU supports 6 MCE banks
[ 0.009225] using C1E aware idle routine
[ 0.009822] ACPI: Core revision 20110112
[ 0.012056] Setting APIC routing to flat
[ 0.012353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053669] CPU0: AMD Athlon(tm) 7850 Dual-Core Processor stepping 03
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.144019] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144035] Brought up 2 CPUs
[ 0.144037] Total of 2 processors activated (12322.56 BogoMIPS).
[ 0.144363] devtmpfs: initialized
[ 0.149217] print_constraints: dummy:
[ 0.149217] NET: Registered protocol family 16
[ 0.149217] node 0 link 0: io port [1000, ffffff]
[ 0.149217] TOM: 00000000d0000000 aka 3328M
[ 0.149217] Fam 10h mmconf [e0000000, efffffff]
[ 0.149217] node 0 link 0: mmio [a0000, bffff]
[ 0.149217] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.149217] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.149217] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.149217] TOM2: 0000000130000000 aka 4864M
[ 0.149217] bus: [00, 07] on node 0 link 0
[ 0.149217] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.149217] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.149217] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.149217] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.149217] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.149217] Extended Config Space enabled on 1 nodes
[ 0.149217] ACPI: bus type pci registered
[ 0.149217] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.149217] PCI: not using MMCONFIG
[ 0.149217] PCI: Using configuration type 1 for base access
[ 0.149217] PCI: Using configuration type 1 for extended access
[ 0.149217] bio: create slab <bio-0> at 0
[ 0.149217] ACPI: EC: Look up EC in DSDT
[ 0.149586] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.168520] ACPI: Interpreter enabled
[ 0.168523] ACPI: (supports S0 S1 S4 S5)
[ 0.168538] ACPI: Using IOAPIC for interrupt routing
[ 0.168560] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.169707] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.264077] ACPI: No dock devices found.
[ 0.264078] HEST: Table not found.
[ 0.264081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.264145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.264278] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.264280] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.264282] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.264284] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.264286] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.264288] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.264300] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.264337] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.264359] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.264361] pci 0000:00:02.0: PME# disabled
[ 0.264377] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[ 0.264398] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.264401] pci 0000:00:07.0: PME# disabled
[ 0.264428] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.264446] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.264455] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.264464] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.264473] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.264482] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.264491] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.264510] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.264543] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.264556] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.264615] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.264627] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.264692] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.264710] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.264775] pci 0000:00:12.2: supports D1 D2
[ 0.264776] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.264780] pci 0000:00:12.2: PME# disabled
[ 0.264800] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.264812] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.264871] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.264883] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.264948] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.264965] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[ 0.265031] pci 0000:00:13.2: supports D1 D2
[ 0.265032] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.265036] pci 0000:00:13.2: PME# disabled
[ 0.265058] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.265144] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.265160] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.265169] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.265177] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.265186] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.265195] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.265242] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.265262] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.265316] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.265320] pci 0000:00:14.2: PME# disabled
[ 0.265332] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.265401] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.265439] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.265451] pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[ 0.265512] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.265524] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.265534] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.265545] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.265557] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.265607] pci 0000:01:00.0: [1002:7187] type 0 class 0x000300
[ 0.265618] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.265627] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.265633] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.265643] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.265658] pci 0000:01:00.0: supports D1 D2
[ 0.265673] pci 0000:01:00.1: [1002:71a7] type 0 class 0x000380
[ 0.265684] pci 0000:01:00.1: reg 10: [mem 0xfeae0000-0xfeaeffff 64bit]
[ 0.265718] pci 0000:01:00.1: supports D1 D2
[ 0.265729] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.265736] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.265739] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.265742] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.265745] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.265776] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.265787] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.265806] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.265819] pci 0000:02:00.0: reg 20: [mem 0xfdff0000-0xfdffffff 64bit pref]
[ 0.265828] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.265854] pci 0000:02:00.0: supports D1 D2
[ 0.265856] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.265859] pci 0000:02:00.0: PME# disabled
[ 0.272025] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.272028] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.272030] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.272034] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.272094] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.272098] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.272102] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272107] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272109] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.272111] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.272113] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.272115] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.272117] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.272120] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.272131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.272327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.272364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.272421] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.275309] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.275337] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.275365] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.275394] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.275421] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.275449] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.275476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *9 10 11 12 14 15)
[ 0.275503] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.275578] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.275580] vgaarb: loaded
[ 0.275601] PCI: Using ACPI for IRQ routing
[ 0.275603] PCI: pci_cache_line_size set to 64 bytes
[ 0.275666] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.275668] reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
[ 0.275755] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.275758] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.277038] Switching to clocksource hpet
[ 0.277934] pnp: PnP ACPI init
[ 0.277949] ACPI: bus type pnp registered
[ 0.278023] pnp 00:00: [bus 00-ff]
[ 0.278025] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.278027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.278028] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.278030] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.278032] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.278034] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.278035] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.278070] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.278128] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.278130] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.278165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278190] pnp 00:02: [dma 4]
[ 0.278192] pnp 00:02: [io 0x0000-0x000f]
[ 0.278193] pnp 00:02: [io 0x0081-0x0083]
[ 0.278195] pnp 00:02: [io 0x0087]
[ 0.278196] pnp 00:02: [io 0x0089-0x008b]
[ 0.278197] pnp 00:02: [io 0x008f]
[ 0.278199] pnp 00:02: [io 0x00c0-0x00df]
[ 0.278220] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.278227] pnp 00:03: [io 0x0070-0x0071]
[ 0.278238] pnp 00:03: [irq 8]
[ 0.278259] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278266] pnp 00:04: [io 0x0061]
[ 0.278284] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.278291] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.278298] pnp 00:05: [irq 13]
[ 0.278320] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.278740] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.278742] pnp 00:06: [io 0x03f7]
[ 0.278747] pnp 00:06: [irq 6]
[ 0.278749] pnp 00:06: [dma 2]
[ 0.278795] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.278128] Switched to NOHz mode on CPU #0
[ 0.278795] Switched to NOHz mode on CPU #1
[ 0.278795] pnp 00:07: [io 0x0378-0x037f]
[ 0.278795] pnp 00:07: [irq 7]
[ 0.278795] pnp 00:07: [dma 0 disabled]
[ 0.278795] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.278795] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.278795] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.278795] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.278795] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.278795] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.278795] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.278795] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278795] pnp 00:0a: [io 0x0010-0x001f]
[ 0.278795] pnp 00:0a: [io 0x0022-0x003f]
[ 0.278795] pnp 00:0a: [io 0x0062-0x0063]
[ 0.278795] pnp 00:0a: [io 0x0065-0x006f]
[ 0.278795] pnp 00:0a: [io 0x0072-0x007f]
[ 0.278795] pnp 00:0a: [io 0x0080]
[ 0.278795] pnp 00:0a: [io 0x0084-0x0086]
[ 0.278795] pnp 00:0a: [io 0x0088]
[ 0.278795] pnp 00:0a: [io 0x008c-0x008e]
[ 0.278795] pnp 00:0a: [io 0x0090-0x009f]
[ 0.278795] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.278795] pnp 00:0a: [io 0x00b1]
[ 0.278795] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.278795] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.278795] pnp 00:0a: [io 0x040b]
[ 0.278795] pnp 00:0a: [io 0x04d6]
[ 0.278795] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.278795] pnp 00:0a: [io 0x0c14]
[ 0.278795] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.278795] pnp 00:0a: [io 0x0c52]
[ 0.278795] pnp 00:0a: [io 0x0c6c]
[ 0.278795] pnp 00:0a: [io 0x0c6f]
[ 0.278795] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.278795] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.278795] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.278795] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.278795] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.278795] pnp 00:0a: [io 0x0800-0x089f]
[ 0.278795] pnp 00:0a: [io 0x0b20-0x0b2f]
[ 0.278795] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.278795] pnp 00:0a: [io 0x0900-0x090f]
[ 0.278795] pnp 00:0a: [io 0x0910-0x091f]
[ 0.278795] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.278795] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.278795] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.278807] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.278809] system 00:0a: [io 0x040b] has been reserved
[ 0.278811] system 00:0a: [io 0x04d6] has been reserved
[ 0.278812] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.278814] system 00:0a: [io 0x0c14] has been reserved
[ 0.278816] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.278818] system 00:0a: [io 0x0c52] has been reserved
[ 0.278820] system 00:0a: [io 0x0c6c] has been reserved
[ 0.278822] system 00:0a: [io 0x0c6f] has been reserved
[ 0.278824] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.278826] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.278828] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.278830] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.278832] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.278834] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.278836] system 00:0a: [io 0x0b20-0x0b2f] has been reserved
[ 0.278838] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.278840] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.278842] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.278844] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.278846] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.278849] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278866] pnp 00:0b: [io 0x0060]
[ 0.278868] pnp 00:0b: [io 0x0064]
[ 0.278871] pnp 00:0b: [irq 1]
[ 0.278894] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.279005] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.279007] pnp 00:0c: [io 0x0e00-0x0e0f]
[ 0.279009] pnp 00:0c: [io 0x0e80-0x0e8f]
[ 0.279010] pnp 00:0c: [io 0x0f40-0x0f4f]
[ 0.279012] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.279048] system 00:0c: [io 0x0e00-0x0e0f] has been reserved
[ 0.279050] system 00:0c: [io 0x0e80-0x0e8f] has been reserved
[ 0.279052] system 00:0c: [io 0x0f40-0x0f4f] has been reserved
[ 0.279054] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.279057] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279445] pnp 00:0d: [io 0x03f8-0x03ff]
[ 0.279449] pnp 00:0d: [irq 4]
[ 0.279450] pnp 00:0d: [dma 0 disabled]
[ 0.279513] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.279534] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.279572] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.279574] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279920] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.279922] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.279924] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.279926] pnp 00:0f: [mem 0x00100000-0xcfffffff]
[ 0.279927] pnp 00:0f: [mem 0xfec00000-0xffffffff]
[ 0.279966] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.279968] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.279970] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.279972] system 00:0f: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.279974] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.279976] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.280073] pnp: PnP ACPI: found 16 devices
[ 0.280074] ACPI: ACPI bus type pnp unregistered
[ 0.286005] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.286007] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.286010] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.286013] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.286017] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.286019] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.286021] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.286024] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.286027] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.286029] pci 0000:00:14.4: bridge window [io disabled]
[ 0.286033] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.286037] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.286054] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.286057] pci 0000:00:02.0: setting latency timer to 64
[ 0.286064] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.286066] pci 0000:00:07.0: setting latency timer to 64
[ 0.286072] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.286074] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.286076] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.286078] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.286079] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.286081] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.286083] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.286085] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.286086] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.286088] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.286090] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.286092] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.286094] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.286095] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.286097] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.286099] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.286101] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.286102] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.286125] NET: Registered protocol family 2
[ 0.286241] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.287221] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.289847] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.290169] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.290172] TCP reno registered
[ 0.290181] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.290210] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.290322] NET: Registered protocol family 1
[ 0.380031] pci 0000:01:00.0: Boot video device
[ 0.380038] PCI: CLS 64 bytes, default 64
[ 0.380077] Unpacking initramfs...
[ 0.542669] Freeing initrd memory: 9296k freed
[ 0.546813] PCI-DMA: Disabling AGP.
[ 0.546905] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.546906] PCI-DMA: using GART IOMMU.
[ 0.546910] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.550236] audit: initializing netlink socket (disabled)
[ 0.550246] type=2000 audit(1302431487.544:1): initialized
[ 0.556797] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.558521] VFS: Disk quotas dquot_6.5.2
[ 0.558572] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.558640] msgmni has been set to 7928
[ 0.558835] alg: No test for stdrng (krng)
[ 0.558879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.558882] io scheduler noop registered
[ 0.558883] io scheduler deadline registered
[ 0.558916] io scheduler cfq registered (default)
[ 0.559010] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.559035] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.559120] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.559138] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.559263] ERST: Table is not found!
[ 0.559312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.579760] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.640575] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.640789] Linux agpgart interface v0.103
[ 0.644056] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.644058] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.644182] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.644255] mousedev: PS/2 mouse device common for all mice
[ 0.644294] rtc_cmos 00:03: RTC can wake from S4
[ 0.644349] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.644374] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.644383] cpuidle: using governor ladder
[ 0.644385] cpuidle: using governor menu
[ 0.644563] TCP cubic registered
[ 0.644655] NET: Registered protocol family 10
[ 0.645093] Mobile IPv6
[ 0.645096] NET: Registered protocol family 17
[ 0.645100] Registering the dns_resolver key type
[ 0.645174] PM: Hibernation image not present or could not be loaded.
[ 0.645189] registered taskstats version 1
[ 0.645582] rtc_cmos 00:03: setting system clock to 2011-04-10 10:31:28 UTC (1302431488)
[ 0.645599] Initalizing network drop monitor service
[ 0.646531] Freeing unused kernel memory: 676k freed
[ 0.646731] Write protecting the kernel read-only data: 6144k
[ 0.649428] Freeing unused kernel memory: 836k freed
[ 0.652155] Freeing unused kernel memory: 776k freed
[ 0.664481] udev[77]: starting version 166
[ 0.670440] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.730852] Floppy drive(s): fd0 is 1.44M
[ 0.755592] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.755594] ACPI: Thermal Zone [THRM] (27 C)
[ 0.755681] SCSI subsystem initialized
[ 0.759135] FDC 0 is a post-1991 82077
[ 0.759221] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.759243] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.759293] usbcore: registered new interface driver usbfs
[ 0.759318] usbcore: registered new interface driver hub
[ 0.759633] r8169 0000:02:00.0: setting latency timer to 64
[ 0.759675] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.760107] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc9000060c000, 00:e0:4d:9a:21:14, XID 1c4000c0 IRQ 42
[ 0.762919] usbcore: registered new device driver usb
[ 0.780341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.783141] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.783163] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.783186] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.783628] libata version 3.00 loaded.
[ 0.801245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.802557] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.802573] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.802585] ehci_hcd 0000:00:12.2: debug port 1
[ 0.802608] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000
[ 0.812028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.812045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.812047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812049] usb usb1: Product: EHCI Host Controller
[ 0.812051] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 0.812052] usb usb1: SerialNumber: 0000:00:12.2
[ 0.812150] hub 1-0:1.0: USB hub found
[ 0.812153] hub 1-0:1.0: 6 ports detected
[ 0.812285] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.812299] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.812306] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.828030] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.828041] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.828053] ehci_hcd 0000:00:13.2: debug port 1
[ 0.828070] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800
[ 0.840022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.840034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.840036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.840038] usb usb2: Product: EHCI Host Controller
[ 0.840040] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 0.840041] usb usb2: SerialNumber: 0000:00:13.2
[ 0.840106] hub 2-0:1.0: USB hub found
[ 0.840109] hub 2-0:1.0: 6 ports detected
[ 0.841060] ahci 0000:00:11.0: version 3.0
[ 0.841077] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.841177] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.841180] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
[ 0.841924] scsi0 : ahci
[ 0.842039] scsi1 : ahci
[ 0.842115] scsi2 : ahci
[ 0.842188] scsi3 : ahci
[ 0.842274] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
[ 0.842277] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22
[ 0.842280] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22
[ 0.842283] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22
[ 0.842418] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.842434] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.842446] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.860063] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 0.920026] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.920029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920031] usb usb3: Product: OHCI Host Controller
[ 0.920032] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 0.920034] usb usb3: SerialNumber: 0000:00:12.0
[ 0.920122] hub 3-0:1.0: USB hub found
[ 0.920128] hub 3-0:1.0: 3 ports detected
[ 0.920246] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.920262] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.920270] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.924050] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 0.984024] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.984026] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.984027] usb usb4: Product: OHCI Host Controller
[ 0.984029] usb usb4: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 0.984030] usb usb4: SerialNumber: 0000:00:12.1
[ 0.984106] hub 4-0:1.0: USB hub found
[ 0.984111] hub 4-0:1.0: 3 ports detected
[ 0.984210] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.984221] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.984228] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.996053] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.056022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.056024] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056026] usb usb5: Product: OHCI Host Controller
[ 1.056027] usb usb5: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.056029] usb usb5: SerialNumber: 0000:00:13.0
[ 1.056096] hub 5-0:1.0: USB hub found
[ 1.056101] hub 5-0:1.0: 3 ports detected
[ 1.056194] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.056204] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.056210] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.056241] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.116019] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.116024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116025] usb usb6: Product: OHCI Host Controller
[ 1.116027] usb usb6: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.116028] usb usb6: SerialNumber: 0000:00:13.1
[ 1.116094] hub 6-0:1.0: USB hub found
[ 1.116099] hub 6-0:1.0: 3 ports detected
[ 1.116202] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.116213] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.116220] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.120040] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000
[ 1.124030] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.160040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.160073] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.160102] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.180021] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.180023] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180024] usb usb7: Product: OHCI Host Controller
[ 1.180026] usb usb7: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.180027] usb usb7: SerialNumber: 0000:00:14.5
[ 1.180094] hub 7-0:1.0: USB hub found
[ 1.180100] hub 7-0:1.0: 2 ports detected
[ 1.180184] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.180207] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.180523] scsi4 : pata_atiixp
[ 1.180608] scsi5 : pata_atiixp
[ 1.181077] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.181079] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.260526] usb 1-1: New USB device found, idVendor=04b8, idProduct=011f
[ 1.260529] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.260531] usb 1-1: Product: EPSON Scanner
[ 1.260532] usb 1-1: Manufacturer: EPSON
[ 1.347730] ata6.00: ATAPI: PLEXTOR DVDR PX-712A, 1.02, max UDMA/33
[ 1.356409] ata6.00: configured for UDMA/33
[ 1.548015] Refined TSC clocksource calibration: 3080.312 MHz.
[ 1.548018] Switching to clocksource tsc
[ 1.580007] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 1.744011] ata1: softreset failed (device not ready)
[ 1.744050] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.758978] usb 4-1: New USB device found, idVendor=045e, idProduct=0039
[ 1.758980] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.758982] usb 4-1: Product: Microsoft IntelliMouse® Optical
[ 1.758984] usb 4-1: Manufacturer: Microsoft
[ 1.916031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.918106] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 1.918108] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.920190] ata1.00: configured for UDMA/133
[ 1.920309] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 1.921167] scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-712A 1.02 PQ: 0 ANSI: 5
[ 1.931963] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.931995] sd 0:0:0:0: [sda] Write Protect is off
[ 1.932006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.932018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.935760] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.935763] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.935844] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.938117] input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
[ 1.938181] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:12.1-1/input0
[ 1.938196] usbcore: registered new interface driver usbhid
[ 1.938197] usbhid: USB HID core driver
[ 1.952159] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.952408] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.958331] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.958586] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.936375] EXT3-fs: barriers not enabled
[ 2.997638] kjournald starting. Commit interval 5 seconds
[ 2.997663] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 4.004681] udev[451]: starting version 166
[ 4.166397] wmi: Mapper loaded
[ 4.172450] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.192299] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 4.198900] ACPI: acpi_idle registered with cpuidle
[ 4.199785] ACPI: Power Button [PWRB]
[ 4.199842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.199847] ACPI: Power Button [PWRF]
[ 4.335584] MCE: In-kernel MCE decoding enabled.
[ 4.373699] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.373754] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.397006] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.462137] EDAC MC: Ver: 2.1.0 Apr 7 2011
[ 4.462245] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 4.462247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.594493] EDAC amd64_edac: v3.3.0
[ 4.594630] EDAC amd64: DRAM ECC disabled.
[ 4.594634] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.594635] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.594637] (Note that use of the override may cause unknown side effects.)
[ 4.708586] [drm] Initialized drm 1.1.0 20060810
[ 4.776427] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.776433] hda_intel: position_fix set to 1 for device 1565:8218
[ 4.848650] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 4.850810] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.854003] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.984220] [drm] radeon kernel modesetting enabled.
[ 4.984328] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.984334] radeon 0000:01:00.0: setting latency timer to 64
[ 4.986001] [drm] initializing kernel modesetting (RV515 0x1002:0x7187).
[ 4.986037] [drm] register mmio base: 0xFEAF0000
[ 4.986039] [drm] register mmio size: 65536
[ 4.990680] ATOM BIOS: RV516LE
[ 4.990701] [drm] Generation 2 PCI interface, using max accessible memory
[ 4.990706] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.990708] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 4.990723] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.990724] [drm] Driver supports precise vblank timestamp query.
[ 4.990757] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[ 4.990762] radeon 0000:01:00.0: radeon: using MSI.
[ 4.990782] [drm] radeon: irq initialized.
[ 4.991298] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.991301] [drm] RAM width 128bits DDR
[ 4.991376] [TTM] Zone kernel: Available graphics memory: 2030890 kiB.
[ 4.991378] [TTM] Initializing pool allocator.
[ 4.991397] [drm] radeon: 512M of VRAM memory ready
[ 4.991399] [drm] radeon: 512M of GTT memory ready.
[ 4.991423] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.993047] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 4.993670] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 4.993686] radeon 0000:01:00.0: WB enabled
[ 4.993734] [drm] Loading R500 Microcode
[ 5.247741] [drm] radeon: ring at 0x0000000020001000
[ 5.247775] [drm] ring test succeeded in 9 usecs
[ 5.247861] [drm] radeon: ib pool ready.
[ 5.247929] [drm] ib test succeeded in 0 usecs
[ 5.247935] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 5.248138] [drm] Radeon Display Connectors
[ 5.248140] [drm] Connector 0:
[ 5.248141] [drm] VGA
[ 5.248142] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.248144] [drm] Encoders:
[ 5.248145] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.248147] [drm] Connector 1:
[ 5.248148] [drm] S-video
[ 5.248149] [drm] Encoders:
[ 5.248150] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 5.248151] [drm] Connector 2:
[ 5.248152] [drm] DVI-I
[ 5.248153] [drm] HPD2
[ 5.248155] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.248156] [drm] Encoders:
[ 5.248157] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.248158] [drm] DFP3: INTERNAL_LVTM1
[ 5.394657] [drm] fb mappable at 0xD00C0000
[ 5.394658] [drm] vram apper at 0xD0000000
[ 5.394659] [drm] size 5300224
[ 5.394661] [drm] fb depth is 24
[ 5.394662] [drm] pitch is 5888
[ 5.407592] Console: switching to colour frame buffer device 180x56
[ 5.411074] fb0: radeondrmfb frame buffer device
[ 5.411075] drm: registered panic notifier
[ 5.411080] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[ 6.978991] EXT3-fs (sda3): using internal journal
[ 7.069573] loop: module loaded
[ 7.094581] it87: Found IT8718F chip at 0xe80, revision 5
[ 7.094622] ACPI: resource it87 [io 0x0e85-0x0e86] conflicts with ACPI region SENP [io 0xe85-0xe86]
[ 7.094624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.389370] fuse init (API version 7.16)
[ 8.989010] r8169 0000:02:00.0: eth0: link down
[ 8.989017] r8169 0000:02:00.0: eth0: link down
[ 8.989454] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.369998] kvm: Nested Virtualization enabled
[ 9.370001] kvm: Nested Paging enabled
[ 10.613305] r8169 0000:02:00.0: eth0: link up
[ 10.613728] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.441675] lp0: using parport0 (interrupt-driven).
[ 12.508797] ppdev: user-space parallel port driver
[ 21.512011] eth0: no IPv6 routers present
[ 688.794986] device-mapper: uevent: version 1.0.3
[ 688.795193] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 692.273365] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 692.274555] SGI XFS Quota Management subsystem
[ 692.326222] JFS: nTxBlock = 8192, nTxLock = 65536
[ 692.395107] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 692.424277] QNX4 filesystem 0.2.3 registered.
[ 692.464041] Btrfs loaded
[ 900.804011] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 900.804016] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 900.804018] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 900.804021] Disabling lock debugging due to kernel taint
[ 900.804023] [Hardware Error]: Machine check events logged
[ 1050.804016] [Hardware Error]: MC1_STATUS[Over|CE|-|-|AddrV]: 0xd400000000000151
[ 1050.804021] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1050.804023] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1050.804027] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 1050.804029] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 1050.804031] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 1050.804035] [Hardware Error]: Machine check events logged
[ 1275.804012] [Hardware Error]: MC1_STATUS[Over|CE|-|-|AddrV]: 0xd400000000000151
[ 1275.804016] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1275.804019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1275.804023] [Hardware Error]: Machine check events logged
[ 1800.804019] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 1800.804023] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 1800.804026] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 1800.804030] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 1800.804031] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1800.804034] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1800.804037] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV]: 0x940000000000017a
[ 1800.804038] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 1800.804040] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 1800.804043] [Hardware Error]: Machine check events logged
[ 1888.537887] reportbug[4653] trap divide error ip:f68d3a62 sp:f5f14730 error:0 in libgtk-x11-2.0.so.0.2400.3[f67a2000+3dd000]
[ 1950.804013] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 1950.804017] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 1950.804020] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 1950.804024] [Hardware Error]: Machine check events logged
[ 2025.804014] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2025.804019] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2025.804021] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2025.804025] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2025.804027] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2025.804029] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2025.804031] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000018a
[ 2025.804033] [Hardware Error]: Bus Unit Error: SNP error during data copyback.
[ 2025.804036] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: SNP
[ 2025.804038] [Hardware Error]: Machine check events logged
[ 2063.304013] [Hardware Error]: MC0_STATUS[Over|CE|-|-|AddrV|CECC]: 0xd43ac00000000136
[ 2063.304018] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2063.304020] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2063.304024] [Hardware Error]: Machine check events logged
[ 2082.052020] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2082.052025] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2082.052028] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2110.168015] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 2110.168020] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 2110.168023] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 2250.748019] [Hardware Error]: MC1_STATUS[Over|CE|-|-|-]: 0xd000000000000171
[ 2250.748023] [Hardware Error]: Instruction Cache Error: Copyback Parity/Victim error.
[ 2250.748026] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: EV
[ 2250.748031] mce_notify_irq: 2 callbacks suppressed
[ 2250.748032] [Hardware Error]: Machine check events logged
[ 2288.236017] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 2288.236022] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 2288.236025] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 2288.236029] [Hardware Error]: Machine check events logged
[ 2569.396013] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 2569.396018] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 2569.396021] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 2569.396025] [Hardware Error]: Machine check events logged
[ 2644.372017] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2644.372022] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2644.372024] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2644.372028] [Hardware Error]: Machine check events logged
[ 2681.860016] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2681.860021] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2681.860023] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2738.092013] [Hardware Error]: MC1_STATUS[-|CE|-|-|-]: 0x9000000000000171
[ 2738.092017] [Hardware Error]: Instruction Cache Error: Copyback Parity/Victim error.
[ 2738.092020] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: EV
[ 2738.092024] mce_notify_irq: 1 callbacks suppressed
[ 2738.092026] [Hardware Error]: Machine check events logged
[ 2869.300012] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2869.300017] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2869.300019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 2869.300023] [Hardware Error]: Machine check events logged
[ 2906.788012] [Hardware Error]: MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000000151
[ 2906.788016] [Hardware Error]: Instruction Cache Error: Parity error during data load.
[ 2906.788019] [Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[ 3187.948018] [Hardware Error]: MC0_STATUS[-|CE|-|-|AddrV|CECC]: 0x943ac00000000136
[ 3187.948022] [Hardware Error]: Data Cache Error: during L1 linefill from L2.
[ 3187.948025] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[ 3187.948029] mce_notify_irq: 1 callbacks suppressed
[ 3187.948031] [Hardware Error]: Machine check events logged
[ 3262.924013] [Hardware Error]: MC2_STATUS[-|CE|-|-|AddrV|CECC]: 0x940040000000017a
[ 3262.924017] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 3262.924020] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
[ 3262.924024] [Hardware Error]: Machine check events logged
LSHW
description: Desktop Computer
product: A780G M2+ SE (To Be Filled By O.E.M.)
vendor: BIOSTAR Group
version: 6.0
serial: None
width: 64 bits
capabilities: smbios-2.5 dmi-2.5 smp-1.1 smp vsyscall64 vsyscall32
configuration: boot=normal chassis=desktop cpus=2 family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009
*-core
description: Motherboard
product: A780G M2+ SE
vendor: BIOSTAR Group
physical id: 0
version: 6.0
serial: None
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 080014
date: 07/28/2009
size: 64KiB
capacity: 960KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: AMD Athlon(tm) 7850 Dual-Core Processor
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 4
bus info: cpu@0
version: 15.2.3
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 3080MHz
width: 64 bits
clock: 200MHz
capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
configuration: cores=2 enabledcores=2
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KiB
capacity: 1MiB
capabilities: pipeline-burst internal varies unified
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 8KiB
capacity: 8KiB
capabilities: pipeline-burst internal varies unified
*-memory
description: System Memory
physical id: 24
slot: System board or motherboard
size: 4GiB
*-bank:0
description: DIMM DDR2 Synchronous 333 MHz (3,0 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 333MHz (3.0ns)
*-bank:1
description: DIMM DDR2 Synchronous 333 MHz (3,0 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 2GiB
width: 64 bits
clock: 333MHz (3.0ns)
*-bank:2
description: DIMM SDRAM [empty]
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
*-bank:3
description: DIMM SDRAM [empty]
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
*-cpu:1
physical id: 1
bus info: cpu@1
version: 15.2.3
size: 3100MHz
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 512KiB
*-pci:0
description: Host bridge
product: RS780 Host Bridge
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
*-pci:0
description: PCI bridge
product: RS780 PCI to PCI bridge (ext gfx port 0)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40 ioport:d000(size=4096) memory:fea00000-feafffff ioport:d0000000(size=268435456)
*-display:0
description: VGA compatible controller
product: RV516 [Radeon X1300/X1550 Series]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:43 memory:d0000000-dfffffff memory:feaf0000-feafffff ioport:d000(size=256) memory:feac0000-feadffff
*-display:1 UNCLAIMED
description: Display controller
product: RV516 [Radeon X1300/X1550 Series] (Secondary)
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: latency=0
resources: memory:feae0000-feaeffff
*-pci:1
description: PCI bridge
product: RS780 PCI to PCI bridge (PCIE port 3)
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 7
bus info: pci@0000:00:07.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41 ioport:e000(size=4096) memory:feb00000-febfffff ioport:fdf00000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:e0:4d:9a:21:14
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:42 ioport:e800(size=256) memory:febff000-febfffff memory:fdff0000-fdffffff memory:febc0000-febdffff
*-storage
description: SATA controller
product: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
vendor: ATI Technologies Inc
physical id: 11
bus info: pci@0000:00:11.0
logical name: scsi0
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage pm ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=64
resources: irq:22 ioport:c000(size=8) ioport:b000(size=4) ioport:a000(size=8) ioport:9000(size=4) ioport:8000(size=16) memory:fe9ff800-fe9ffbff
*-disk
description: ATA Disk
product: WDC WD10EARS-00Y
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 80.0
serial: WD-WCAV5E451641
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=64734d02
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: 402d-2d34
size: 98MiB
capacity: 100MiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2010-09-21 16:20:43 filesystem=ntfs label=Riservato per il sistema state=clean
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
version: 3.1
serial: 36926d85-a1d9-e544-b80b-4a10f4fa6676
size: 36GiB
capacity: 36GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2010-09-21 16:20:53 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:2
description: EXT3 volume
vendor: Linux
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
logical name: /
version: 1.0
serial: 9ce15fe4-952c-4943-8965-4d004b2381b0
size: 36GiB
capacity: 36GiB
capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2010-12-19 10:25:11 filesystem=ext3 modified=2011-03-27 19:00:17 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,commit=5,barrier=0,data=ordered mounted=2011-04-10 12:31:34 state=mounted
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@0:0.0.0,4
logical name: /dev/sda4
size: 858GiB
capacity: 858GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: HPFS/NTFS partition
physical id: 5
logical name: /dev/sda5
logical name: /media/volume
capacity: 858GiB
configuration: mount.fstype=fuseblk mount.options=rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-usb:0
description: USB Controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:fe9fe000-fe9fefff
*-usb:1
description: USB Controller
product: SB7x0 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 12.1
bus info: pci@0000:00:12.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:fe9fd000-fe9fdfff
*-usb:2
description: USB Controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:fe9ff000-fe9ff0ff
*-usb:3
description: USB Controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fe9fc000-fe9fcfff
*-usb:4
description: USB Controller
product: SB7x0 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@0000:00:13.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fe9fb000-fe9fbfff
*-usb:5
description: USB Controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:19 memory:fe9fa800-fe9fa8ff
*-serial UNCLAIMED
description: SMBus
product: SBx00 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 3a
width: 32 bits
clock: 66MHz
capabilities: ht cap_list
configuration: latency=0
*-ide
description: IDE interface
product: SB7x0/SB8x0/SB9x0 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
logical name: scsi5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ide msi bus_master cap_list emulated
configuration: driver=pata_atiixp latency=64
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16)
*-cdrom
description: DVD writer
product: DVDR PX-712A
vendor: PLEXTOR
physical id: 0.0.0
bus info: scsi@5:0.0.0
logical name: /dev/cdrom1
logical name: /dev/cdrw1
logical name: /dev/dvd1
logical name: /dev/dvdrw1
logical name: /dev/scd0
logical name: /dev/sr0
version: 1.02
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
*-multimedia
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=64
resources: irq:16 memory:fe9f4000-fe9f7fff
*-isa
description: ISA bridge
product: SB7x0/SB8x0/SB9x0 LPC host controller
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:2
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master
*-usb:6
description: USB Controller
product: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
vendor: ATI Technologies Inc
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fe9f9000-fe9f9fff
*-pci:1
description: Host bridge
product: Family 10h Processor HyperTransport Configuration
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Family 10h Processor Address Map
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Family 10h Processor DRAM Controller
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Family 10h Processor Miscellaneous Control
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Family 10h Processor Link Control
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
--- End Message ---