[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#620652: marked as done (linux-image-2.6.38-2-686-bigmem: fails to disable error beep)



Your message dated Sun, 23 Jun 2013 16:08:17 +0200
with message-id <20130623140817.GA5918@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #620652,
regarding linux-image-2.6.38-2-686-bigmem: fails to disable error beep
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
620652: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=620652
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.38-2
Severity: normal
Tags: sid

Usually as a last resort removing the pc speaker modules pcspkr and
snd_pscp effectively disables the error beep.
Not with this kernel.

In the according directories I removed `pcspkr.ko` and `snd_pcsp.ko`,
then executed `depmod -a`, then built initird with:
update-initramfs -u -k all.

Nevertheless the beep on error is still there...

-- Package-specific info:
** Version:
Linux version 2.6.38-2-686-bigmem (Debian 2.6.38-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 18:09:13 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-686-bigmem root=/dev/mapper/argon-root ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[   14.002820] ext3_orphan_cleanup: deleting unreferenced inode 26983
[   14.002840] ext3_orphan_cleanup: deleting unreferenced inode 26982
[   14.002846] ext3_orphan_cleanup: deleting unreferenced inode 26981
[   14.002859] ext3_orphan_cleanup: deleting unreferenced inode 26980
[   14.002867] EXT3-fs (dm-1): 4 orphan inodes deleted
[   14.002869] EXT3-fs (dm-1): recovery complete
[   14.019147] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[   15.783843] udev[387]: starting version 166
[   16.117114] ACPI: acpi_idle registered with cpuidle
[   16.119366] Monitor-Mwait will be used to enter C-1 state
[   16.119397] Monitor-Mwait will be used to enter C-2 state
[   16.119402] Marking TSC unstable due to TSC halts in idle
[   16.120636] Switching to clocksource hpet
[   16.367628] input: Ideapad extra buttons as /devices/platform/ideapad/input/input4
[   16.371209] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   16.396031] ACPI: Lid Switch [LID0]
[   16.396107] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   16.396168] ACPI: Power Button [PWRB]
[   16.396231] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   16.396269] ACPI: Sleep Button [SLPB]
[   16.396339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[   16.396374] ACPI: Power Button [PWRF]
[   16.721254] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[   16.721260] ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[   16.721263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.807884] [drm] Initialized drm 1.1.0 20060810
[   16.874109] ACPI: AC Adapter [ACAD] (on-line)
[   17.382353] Linux video capture interface: v2.00
[   17.463368] ACPI: Battery Slot [BAT1] (battery present)
[   17.504494] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (064e:a127)
[   17.547767] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9
[   17.547845] usbcore: registered new interface driver uvcvideo
[   17.547847] USB Video Class driver (v1.0.0)
[   17.600722] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[   17.664668] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
[   17.734412] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.734417] i915 0000:00:02.0: setting latency timer to 64
[   17.773100] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   17.773106] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.773108] [drm] Driver supports precise vblank timestamp query.
[   17.857757] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.858085] fixme: max PWM is zero.
[   17.972152] Console: switching to colour frame buffer device 170x48
[   17.976165] fb0: inteldrmfb frame buffer device
[   17.976166] drm: registered panic notifier
[   17.979330] acpi device:08: registered as cooling_device2
[   17.979598] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[   17.979713] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   17.979960] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.980068] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.980073] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.980088] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   17.980165] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   17.980197] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.175066] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[   18.176621] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   18.176715] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   18.176793] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   19.107854] EXT3-fs (dm-1): using internal journal
[   19.327407] loop: module loaded
[   19.819845] Adding 5963772k swap on /dev/mapper/argon-swap_1.  Priority:-1 extents:1 across:5963772k 
[   21.664411] EXT3-fs: barriers not enabled
[   21.803401] kjournald starting.  Commit interval 5 seconds
[   21.803482] EXT3-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[   21.814586] EXT3-fs (dm-3): using internal journal
[   21.814588] EXT3-fs (dm-3): recovery complete
[   21.815167] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[   22.622147] fuse init (API version 7.16)
[   24.317316] apm: BIOS not found.
[   24.352594] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   25.547729] lp: driver loaded but no devices found
[   25.562750] ppdev: user-space parallel port driver
[   28.419430] tg3 0000:07:00.0: irq 48 for MSI/MSI-X
[   28.452417] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.739627] sshd (1606): /proc/1606/oom_adj is deprecated, please use /proc/1606/oom_score_adj instead.
[   28.961474] Disabling lock debugging due to kernel taint
[   28.989790] vboxdrv: Found 2 processor cores.
[   28.990232] vboxdrv: fAsync=0 offMin=0x16f offMax=0x61d
[   28.990281] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   28.990283] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000).
[   29.571003] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[   31.100870] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[   31.100925] ehci_hcd 0000:00:1a.7: PME# enabled
[   31.117107] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[   31.332080] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xf4905800-0xf4905bff] (PCI address [0xf4905800-0xf4905bff])
[   31.332104] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x307)
[   31.332135] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[   31.332179] ehci_hcd 0000:00:1a.7: PME# disabled
[   31.332194] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[   31.332204] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   31.522093] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   31.522105] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   43.020105] tg3 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex
[   43.020112] tg3 0000:07:00.0: eth0: Flow control is on for TX and on for RX
[   43.020359] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   54.016046] eth0: no IPv6 routers present
[  257.452061] CE: hpet increased min_delta_ns to 20113 nsec
[  816.937186] mail-notificati[2478]: segfault at 4d0 ip b77391d6 sp bfadf830 error 4 in libX11.so.6.3.0[b7716000+11c000]
[  922.943465] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[  930.475228] device eth0 entered promiscuous mode

** Model information
not available

** Loaded modules:
Module                  Size  Used by
vboxnetadp             13120  0 
vboxnetflt             23683  2 
vboxdrv               147237  3 vboxnetadp,vboxnetflt
cpufreq_userspace      12520  0 
cpufreq_stats          12670  0 
parport_pc             21895  0 
ppdev                  12621  0 
lp                     12858  0 
parport                27018  3 parport_pc,ppdev,lp
cpufreq_conservative    13598  0 
cpufreq_powersave      12422  0 
acpi_cpufreq           12737  1 
mperf                  12387  1 acpi_cpufreq
uinput                 12984  1 
fuse                   55640  1 
ext2                   53488  1 
loop                   17805  0 
snd_hda_codec_conexant    35784  1 
snd_hda_intel          21529  2 
snd_hda_codec          57563  2 snd_hda_codec_conexant,snd_hda_intel
i915                  276436  2 
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                52774  2 snd_hda_intel,snd_hda_codec
drm_kms_helper         26501  1 i915
snd_seq                39172  0 
snd_timer              22171  2 snd_pcm,snd_seq
uvcvideo               52490  0 
joydev                 16906  0 
videodev               48418  1 uvcvideo
drm                   128416  3 i915,drm_kms_helper
i2c_i801               12670  0 
snd_seq_device         12995  1 snd_seq
battery                12926  0 
ac                     12552  0 
i2c_algo_bit           12706  1 i915
i2c_core               18989  6 i915,drm_kms_helper,videodev,drm,i2c_i801,i2c_algo_bit
snd                    38153  12 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              12878  1 snd
snd_page_alloc         12841  2 snd_hda_intel,snd_pcm
power_supply           13283  2 battery,ac
psmouse                45863  0 
button                 12866  1 i915
ideapad_laptop         12772  0 
tpm_tis                12949  0 
tpm                    17454  1 tpm_tis
tpm_bios               12799  1 tpm
evdev                  13084  35 
sparse_keymap          12680  1 ideapad_laptop
rfkill                 18510  1 ideapad_laptop
video                  17345  1 i915
processor              26983  3 acpi_cpufreq
serio_raw              12758  0 
ext3                   98001  2 
jbd                    40818  1 ext3
mbcache                12810  2 ext2,ext3
sha256_generic         16709  2 
aes_i586               16608  4 
aes_generic            37066  1 aes_i586
cbc                    12659  2 
dm_crypt               17809  1 
dm_mod                 56394  12 dm_crypt
sg                     21385  0 
hid_cherry             12447  0 
usbhid                 35168  0 
hid                    59736  2 hid_cherry,usbhid
sd_mod                 34941  3 
sr_mod                 17418  0 
crc_t10dif             12332  1 sd_mod
cdrom                  34631  1 sr_mod
uhci_hcd               21850  0 
ahci                   20897  2 
libahci                22161  1 ahci
libata                131904  2 ahci,libahci
ehci_hcd               34919  0 
tg3                   103807  0 
scsi_mod              134369  4 sg,sd_mod,sr_mod,libata
usbcore                99058  5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
thermal                13058  0 
libphy                 18279  1 tg3
thermal_sys            17667  3 video,processor,thermal
nls_base               12649  1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 09)
	Subsystem: Lenovo Device [17aa:3a00]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:3a02]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 1800 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 09)
	Subsystem: Lenovo Device [17aa:3a02]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a09]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 1820 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a0a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 1840 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a0b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 20
	Region 4: I/O ports at 1860 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:3a0c]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at f4905800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
	Subsystem: Lenovo Device [17aa:3a0d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at f4700000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0000000-c01fffff
	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: c0400000-c05fffff
	Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f4500000-f45fffff
	Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0000000-f3ffffff
	Prefetchable memory behind bridge: 00000000f6000000-00000000f7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: f4600000-f46fffff
	Prefetchable memory behind bridge: 00000000c0a00000-00000000c0bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a14]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a15]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 18a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:3a16]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 18c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:3a17]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f4905c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
	Subsystem: Lenovo Device [17aa:3a19]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:3a1a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 45
	Region 0: I/O ports at 1818 [size=8]
	Region 1: I/O ports at 180c [size=4]
	Region 2: I/O ports at 1810 [size=8]
	Region 3: I/O ports at 1808 [size=4]
	Region 4: I/O ports at 18e0 [size=32]
	Region 5: Memory at f4905000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
	Subsystem: Lenovo Device [17aa:3a1d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at c0c00000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 1c00 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
	Subsystem: Lenovo Device [17aa:3a1f]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 10
	Region 0: Memory at f4704000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
	Subsystem: Broadcom Corporation Device [14e4:04b5]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at f4500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>

07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
	Subsystem: Lenovo IdeaPad S10e [17aa:3a23]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at f4600000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 064e:a127 Suyin Corp. 
Bus 006 Device 002: ID 04d9:1135 Holtek Semiconductor, Inc. 
Bus 006 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (1001, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-686-bigmem depends on:
ii  debconf [debconf-2.0]         1.5.38     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    3          Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-686-bigmem recommends:
ii  firmware-linux-free           3          Binary firmware for various driver
ii  libc6-i686                    2.11.2-11  Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.38-2-686-bigmem suggests:
ii  grub-pc                 1.98+20100804-14 GRand Unified Bootloader, version 
pn  linux-doc-2.6.38        <none>           (no description available)

Versions of packages linux-image-2.6.38-2-686-bigmem is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.38-2-686-bigmem/postinst/ignoring-do-bootloader-2.6.38-2-686-bigmem:
  linux-image-2.6.38-2-686-bigmem/postinst/depmod-error-initrd-2.6.38-2-686-bigmem: false
* linux-image-2.6.38-2-686-bigmem/postinst/missing-firmware-2.6.38-2-686-bigmem:
  linux-image-2.6.38-2-686-bigmem/prerm/removing-running-kernel-2.6.38-2-686-bigmem: true

-- debsums errors found:
debsums: missing file /lib/modules/2.6.38-2-686-bigmem/kernel/drivers/input/misc/pcspkr.ko (from linux-image-2.6.38-2-686-bigmem package)
debsums: missing file /lib/modules/2.6.38-2-686-bigmem/kernel/sound/drivers/pcsp/snd-pcsp.ko (from linux-image-2.6.38-2-686-bigmem package)



--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: