[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#620278: marked as done (linux-image-2.6.38-2-amd64: tpm_tis failure increases boot time a llllooootttt)

Your message dated Sun, 23 Jun 2013 16:08:17 +0200
with message-id <20130623140817.GA5918@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #620278,
regarding linux-image-2.6.38-2-amd64: tpm_tis failure increases boot time a llllooootttt
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
620278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=620278
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.38-2
Severity: normal

Hi,

there are several problems with this linux-image, either the configuration or
patches as a self-compile 2.6.38-rc7 does not suffer from those problems.
The boot process (until login on vt1 is possible) take >6 minutes with the
Debian kernel while the self-compiled (although almost everything that's
needed is compiled-in) kernel takes far less than 1 minute (never measured
this).

If you more information than below, just tell me.

Regards,

Hendrik Sattler

-- Package-specific info:
** Kernel log: boot messages should be attached
[   11.177753] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input11
[  129.448119] tpm_tis 00:0b: tpm_transmit: tpm_send: error -62
[...]
Mar 31 19:31:56 yavin4 kernel: [  360.588423] modprobe        D ffff8800b7f90000     0   696      1 0x00000000
Mar 31 19:31:56 yavin4 kernel: [  360.588434]  ffff8800b7f90000 0000000000000086 ffff880000000000 ffff880036deca40
Mar 31 19:31:56 yavin4 kernel: [  360.588447]  0000000000013700 ffff8800b8f57fd8 ffff8800b8f57fd8 0000000000013700
Mar 31 19:31:56 yavin4 kernel: [  360.588457]  ffff8800b7f90000 ffff8800b8f56010 0000000000000000 00000001b8f57dc0
Mar 31 19:31:56 yavin4 kernel: [  360.588468] Call Trace:
Mar 31 19:31:56 yavin4 kernel: [  360.588484]  [<ffffffff8132608a>] ? __mutex_lock_common+0x127/0x193
Mar 31 19:31:56 yavin4 kernel: [  360.588505]  [<ffffffff813261c2>] ? mutex_lock+0x1a/0x33
Mar 31 19:31:56 yavin4 kernel: [  360.588515]  [<ffffffff8123e4e7>] ? __driver_attach+0x2e/0x6f
Mar 31 19:31:56 yavin4 kernel: [  360.588524]  [<ffffffff8123e4b9>] ? __driver_attach+0x0/0x6f
Mar 31 19:31:56 yavin4 kernel: [  360.588532]  [<ffffffff8123daac>] ? bus_for_each_dev+0x44/0x78
Mar 31 19:31:56 yavin4 kernel: [  360.588543]  [<ffffffff8123df04>] ? bus_add_driver+0xa8/0x1f0
Mar 31 19:31:56 yavin4 kernel: [  360.588552]  [<ffffffff8123e7b1>] ? driver_register+0x90/0xf8
Mar 31 19:31:56 yavin4 kernel: [  360.588568]  [<ffffffffa035c358>] ? parport_pc_init+0x2a2/0xf4a [parport_pc]
Mar 31 19:31:56 yavin4 kernel: [  360.588585]  [<ffffffffa035c0b6>] ? parport_pc_init+0x0/0xf4a [parport_pc]
Mar 31 19:31:56 yavin4 kernel: [  360.588594]  [<ffffffff81002079>] ? do_one_initcall+0x78/0x131
Mar 31 19:31:56 yavin4 kernel: [  360.588606]  [<ffffffff81075e1a>] ? sys_init_module+0xd3/0x221
Mar 31 19:31:56 yavin4 kernel: [  360.588614]  [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b

** Model information
sys_vendor: Acer
product_name: TravelMate 6592
product_version: PSMBOU-1234567
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Acer
bios_version: V1.41   
board_vendor: Acer
board_name: TravelMate 6592
board_version: Not Applicable

** PNP information
00:0a PNP0401 ECP printer port
    state = disabled
    possible resources:
        Dependent: 00 - Priority acceptable
          port 0x378-0x378, align 0x0, size 0x8, 16-bit address decoding
          port 0x778-0x778, align 0x0, size 0x8, 16-bit address decoding
          irq 5,7 High-Edge
          dma 1,3 8-bit compatible
        Dependent: 01 - Priority acceptable
          port 0x278-0x278, align 0x0, size 0x8, 16-bit address decoding
          port 0x678-0x678, align 0x0, size 0x8, 16-bit address decoding
          irq 5,7 High-Edge
          dma 1,3 8-bit compatible
        Dependent: 02 - Priority acceptable
          port 0x3bc-0x3bc, align 0x0, size 0x4, 16-bit address decoding
          port 0x7bc-0x7bc, align 0x0, size 0x4, 16-bit address decoding
          irq 5,7 High-Edge
          dma 1,3 8-bit compatible

00:0b IFX0102 Infineon Trusted Platform Module
    state = active
    allocated resources:
        mem 0xfed40000-0xfed44fff
        io 0x4e-0x4f
        io 0x1670-0x167f
        irq 11
    compatible devices:
        PNP0c31 (unknown)


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-rc7 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.38     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    3          Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-amd64 recommends:
pn  firmware-linux-free           <none>     (no description available)

Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii  grub-pc                       1.99~rc1-8 GRand Unified Bootloader, version 
ii  linux-doc-2.6.38              2.6.38-2   Linux kernel specific documentatio

Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
ii  firmware-iwlwifi              0.29       Binary firmware for Intel Wireless
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.29       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
  linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
  linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
  linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: