[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#521944: marked as done (linux-image-2.6.29-1-686: Excessive number of interrupts from hrtimer_start_expires)



Your message dated Sun, 23 Jun 2013 16:08:48 +0200
with message-id <20130623140847.GB5918@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #521944,
regarding linux-image-2.6.29-1-686: Excessive number of interrupts from  hrtimer_start_expires
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
521944: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=521944
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.29-1-686
Version: 2.6.29-1
Severity: normal

Running powertop on the 2.6.29-1 kernel gets me the following

Top causes for wakeups:
  50.8% (126.3)     <kernel core> : hrtimer_start_expires (tick_sched_timer)
  12.8% ( 31.7)      <kernel IPI> : Rescheduling interrupts
   7.4% ( 18.5)       <interrupt> : uhci_hcd:usb3, ath
   5.3% ( 13.1)       <interrupt> : ata_piix
   4.4% ( 10.9)       <interrupt> : extra timer interrupt

Previously, the major cause of interrupts had been the kernel IPI, and
hence one reason for upgrading to the latest kernel version. Now there's
hrtimer_start_expires, and quite frankly this is a median case - I've
seen it hit as high as 500 interrupts/second occasionally.

This is causing my battery to get drained at an accelerated rate and
I don't think this is correct behaviour.

-- Package-specific info:
** Version:
Linux version 2.6.29-1-686 (Debian 2.6.29-1) (waldi@debian.org) (gcc
version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Tue Mar 24 23:05:52 UTC 2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.29-1-686
root=UUID=1d2ed566-a39a-423f-8a96-59206e41336e ro quiet

** Not tainted

** Kernel log:
[  913.817857] pci 0000:04:00.3: restoring config space at offset 0x1
(was 0x100000, writing 0x100007)
[  913.817857] pci 0000:04:00.4: restoring config space at offset 0xf
(was 0x1ff, writing 0x10b)
[  913.817857] pci 0000:04:00.4: restoring config space at offset 0x4
(was 0x0, writing 0x54100000)
[  913.817857] pci 0000:04:00.4: restoring config space at offset 0x1
(was 0x100000, writing 0x100007)
[  913.820542] Enabling non-boot CPUs ...
[  913.821353] SMP alternatives: switching to SMP code
[  914.363428] Booting processor 1 APIC 0x1 ip 0x6000
[  913.816617] Initializing CPU#1
[  913.816617] Calibrating delay using timer specific routine..
3192.03 BogoMIPS (lpj=6384069)
[  913.816617] CPU: L1 I cache: 32K, L1 D cache: 24K
[  913.816617] CPU: L2 cache: 512K
[  913.816617] [ds] using Core 2/Atom configuration
[  913.816617] CPU: Physical Processor ID: 0
[  913.816617] CPU: Processor Core ID: 0
[  913.816617] Intel machine check architecture supported.
[  913.816617] Intel machine check reporting enabled on CPU#1.
[  914.452394] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[  914.452572] CPU0 attaching NULL sched-domain.
[  914.453038] Switched to high resolution mode on CPU 1
[  914.464581] CPU0 attaching sched-domain:
[  914.464587]  domain 0: span 0-1 level SIBLING
[  914.464591]   groups: 0 1
[  914.464600] CPU1 attaching sched-domain:
[  914.464604]  domain 0: span 0-1 level SIBLING
[  914.464607]   groups: 1 0
[  914.469032] CPU1 is up
[  914.469037] ACPI: Waking up from system sleep state S3
[  914.500538] pci 0000:00:02.0: PME# disabled
[  914.500560] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  914.500571] pci 0000:00:02.0: setting latency timer to 64
[  914.500581] pci 0000:00:02.1: PME# disabled
[  914.500659] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[  914.500671] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  914.500712] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[  914.500728] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[  914.500744] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[  914.500759] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[  914.500813] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  914.500825] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  914.500859] usb usb1: root hub lost power or was reset
[  914.500919] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  914.500932] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  914.500964] usb usb2: root hub lost power or was reset
[  914.501047] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  914.501063] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  914.501104] usb usb3: root hub lost power or was reset
[  914.501165] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[  914.501177] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[  914.501210] usb usb4: root hub lost power or was reset
[  914.501288] ehci_hcd 0000:00:1d.7: PME# disabled
[  914.501299] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  914.501311] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  914.501324] ehci_hcd 0000:00:1d.7: PME# disabled
[  914.501368] pci 0000:00:1e.0: setting latency timer to 64
[  914.501432] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  914.501443] ata_piix 0000:00:1f.2: setting latency timer to 64
[  914.501651] r8169 0000:02:00.0: PME# disabled
[  914.501843] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  914.529635] sdhci-pci 0000:04:00.0: restoring config space at
offset 0xc (was 0x0, writing 0xffff8000)
[  914.529729] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level,
low) -> IRQ 19
[  914.529756] sdhci-pci 0000:04:00.0: setting latency timer to 64
[  914.529790] pci 0000:04:00.2: PME# disabled
[  914.529804] pci 0000:04:00.3: PME# disabled
[  914.529818] pci 0000:04:00.4: PME# disabled
[  914.537956] r8169: eth0: link down
[  914.668176] sd 0:0:0:0: [sda] Starting disk
[  914.672545] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[  914.672557] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[  914.728958] ata1.00: configured for UDMA/133
[  914.732613] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors:
(120 GB/111 GiB)
[  914.732691] sd 0:0:0:0: [sda] Write Protect is off
[  914.732702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  914.732824] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[  914.844124] usb 5-5: reset high speed USB device using ehci_hcd and address 2
[  915.028191] pci 0000:00:02.0: restoring config space at offset 0x1
(was 0x900007, writing 0x900003)
[  915.028218] pci 0000:00:02.0: setting latency timer to 64
[  915.178185] Restarting tasks ... done.
[  915.909259] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[  918.573027] wlan0: No ProbeResp from current AP 00:02:a5:6f:2e:5b -
assume out of range
[  919.883964] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 1
[  919.884045] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 1
[  920.085026] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 2
[  920.285028] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 3
[  920.485026] wlan0: direct probe to AP 00:02:a5:6f:2e:5b timed out
[  934.036967] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 1
[  934.237076] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 2
[  934.437037] wlan0: direct probe to AP 00:02:a5:6f:2e:5b try 3
[  934.637028] wlan0: direct probe to AP 00:02:a5:6f:2e:5b timed out
[  938.080139] wlan0: authenticate with AP 00:1f:9f:46:79:d7
[  938.083603] wlan0: authenticated
[  938.083610] wlan0: associate with AP 00:1f:9f:46:79:d7
[  938.086258] wlan0: RX AssocResp from 00:1f:9f:46:79:d7 (capab=0x411
status=0 aid=4)
[  938.086265] wlan0: associated
[ 1000.090175] wlan0 direct probe responded
[ 1000.090184] wlan0: authenticate with AP 00:1f:9f:46:79:d7
[ 1000.092614] wlan0: authenticated
[ 1000.092621] wlan0: associate with AP 00:1f:9f:46:79:d7
[ 1000.095226] wlan0: RX ReassocResp from 00:1f:9f:46:79:d7
(capab=0x411 status=0 aid=4)
[ 1000.095234] wlan0: associated
[ 1055.864285] ACPI: Battery Slot [BAT1] (battery present)

** Loaded modules:
Module                  Size  Used by
battery                 5832  0
i915                  129464  2
drm                   133260  3 i915
i2c_algo_bit            4888  1 i915
rfcomm                 29636  0
l2cap                  17072  5 rfcomm
bluetooth              46052  4 rfcomm,l2cap
ipv6                  232468  20
binfmt_misc             7168  1
acpi_cpufreq            6868  0
cpufreq_conservative     5456  0
cpufreq_stats           3588  0
cpufreq_userspace       2748  0
cpufreq_powersave       1276  0
fuse                   48352  3
mmc_block               8952  0
pci_hotplug            24464  0
arc4                    1544  2
ecb                     2352  2
ath5k                  96796  0
mac80211              135592  1 ath5k
cfg80211               33000  2 ath5k,mac80211
loop                   12988  0
joydev                  8560  0
acer_wmi               13404  0
rfkill                  9576  2 acer_wmi
snd_hda_codec_realtek   173504  1
uvcvideo               48808  0
serio_raw               4544  0
videodev               33448  1 uvcvideo
iTCO_wdt                9880  0
evdev                   8160  15
pcspkr                  2092  0
v4l1_compat            11196  2 uvcvideo,videodev
i2c_i801                8104  0
psmouse                36628  0
i2c_core               20828  4 i915,drm,i2c_algo_bit,i2c_i801
rng_core                3644  0
snd_hda_intel          22092  3
video                  16348  0
output                  2504  1 video
snd_hda_codec          58808  2 snd_hda_codec_realtek,snd_hda_intel
wmi                     6332  1 acer_wmi
ac                      2872  0
snd_hwdep               6000  1 snd_hda_codec
button                  5672  0
snd_pcm                62704  2 snd_hda_intel,snd_hda_codec
snd_seq                42120  0
snd_timer              17808  2 snd_pcm,snd_seq
snd_seq_device          6108  1 snd_seq
snd                    48420  14
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore               6204  1 snd
intel_agp              22548  1
snd_page_alloc          8036  2 snd_hda_intel,snd_pcm
agpgart                30624  3 drm,intel_agp
ext3                  107180  1
jbd                    42500  1 ext3
mbcache                 7180  1 ext3
sd_mod                 28252  3
crc_t10dif              1616  1 sd_mod
ata_generic             4316  0
ata_piix               20092  2
libata                148892  2 ata_generic,ata_piix
ehci_hcd               29836  0
scsi_mod              132076  2 sd_mod,libata
ide_pci_generic         3408  0
uhci_hcd               19392  0
sdhci_pci               6364  0
sdhci                  14260  1 sdhci_pci
ide_core               91820  1 ide_pci_generic
usbcore               124872  4 uvcvideo,ehci_hcd,uhci_hcd
mmc_core               44104  2 mmc_block,sdhci
led_class               3668  3 ath5k,acer_wmi,sdhci
r8169                  27728  0
mii                     4648  1 r8169
thermal                15092  0
processor              39540  4 acpi_cpufreq,thermal
fan                     4104  0
thermal_sys            10272  4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express
Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
(prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 58480000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 60c0 [size=8]
	Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at 58500000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
	Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile
945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
[8086:27a6] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at 58400000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family)
High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 58540000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: 57300000-583fffff
	Prefetchable memory behind bridge: 0000000050000000-0000000050ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: 56300000-572fffff
	Prefetchable memory behind bridge: 0000000051000000-00000000520fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 55200000-562fffff
	Prefetchable memory behind bridge: 0000000052100000-00000000530fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 54100000-551fffff
	Prefetchable memory behind bridge: 0000000053100000-00000000540fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 6080 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 6060 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 6040 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at 6020 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 58544400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt, intel-rng

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7
Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 60a0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 6000 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136]
(rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: I/O ports at 3000 [size=256]
	Region 2: Memory at 51010000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at 51000000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 51020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
	Subsystem: Foxconn International, Inc. Device [105b:e008]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k
	Kernel modules: ath5k

04:00.0 System peripheral [0880]: JMicron Technologies, Inc. SD/MMC
Host Controller [197b:2382]
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at 54100300 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at 53100000 [disabled] [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

04:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Standard
SD Host Controller [197b:2381] (prog-if 01)
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at 54100200 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel modules: sdhci-pci

04:00.3 System peripheral [0880]: JMicron Technologies, Inc. MS Host
Controller [197b:2383]
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 54100100 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel modules: jmb38x_ms

04:00.4 System peripheral [0880]: JMicron Technologies, Inc. xD Host
Controller [197b:2384]
	Subsystem: Acer Incorporated [ALI] Device [1025:015b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 54100000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>



-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (400, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.29-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.29-1-686 depends on:
ii  cdebconf [debconf-2.0]        0.139+b1   Debian Configuration Management Sy
ii  debconf [debconf-2.0]         1.5.26     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92l      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.29-1-686 recommends:
ii  libc6-i686                    2.9-4      GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.29-1-686 suggests:
ii  grub-pc [grub]           1.96+20081201-1 GRand Unified Bootloader, version
pn  linux-doc-2.6.29         <none>          (no description available)

-- debconf information:
  linux-image-2.6.29-1-686/preinst/abort-overwrite-2.6.29-1-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.29-1-686/preinst/overwriting-modules-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/elilo-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/initrd-2.6.29-1-686:
  linux-image-2.6.29-1-686/preinst/bootloader-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/bootloader-test-error-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/depmod-error-initrd-2.6.29-1-686: false
  linux-image-2.6.29-1-686/prerm/removing-running-kernel-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.29-1-686/postinst/old-system-map-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.29-1-686/postinst/old-dir-initrd-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/lilo-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/depmod-error-2.6.29-1-686: false
  linux-image-2.6.29-1-686/postinst/bootloader-error-2.6.29-1-686:
  linux-image-2.6.29-1-686/preinst/failed-to-move-modules-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/create-kimage-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/prerm/would-invalidate-boot-loader-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/abort-install-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/old-initrd-link-2.6.29-1-686: true



--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: