Bug#713030: linux-image-3.9: [3.2->3.9] Warnings of CPU intel-microcode not found
Package: src:linux
Version: 3.9.6-1
Severity: normal
File: linux-image-3.9
Dear Maintainer,
after the last kernel update from 3.2.x to 3.9.x in Debian "Jessie", a warning
is shown upon boot up about some CPU microcode not being found. In my case, the
warning is the following one:
platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not
found?)
Other users seem to also have found this exactly after upgrading the kernel as I
did: http://forums.debian.net/viewtopic.php?f=5&t=94248#p502708
Installing intel-microcode fixes this, but it's a non-free package. If the
previous 3.2 kernel didn't produce this warning, I think there should be some
way to avoid installing that package in order to properly load the required CPU
microcodes.
Thanks!
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=28c225a1-305c-493e-9946-f2e52bf08193 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 6.102980] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff88011a2c7308), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 6.103191] ACPI Error: [IIA0] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
[ 6.103196] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff88011a2c7308), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 6.103262] ACPI: Marking method WMNB as Serialized because of AE_ALREADY_EXISTS error
[ 6.105062] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 6.113276] asus-nb-wmi: probe of asus-nb-wmi failed with error -5
[ 6.122175] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 6.122229] usbcore: registered new interface driver uvcvideo
[ 6.122230] USB Video Class driver (1.1.1)
[ 6.270669] ath: EEPROM regdomain: 0x60
[ 6.270672] ath: EEPROM indicates we should expect a direct regpair map
[ 6.270675] ath: Country alpha2 being used: 00
[ 6.270677] ath: Regpair used: 0x60
[ 6.272172] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.297336] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.297587] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90009980000, irq=17
[ 6.637161] cfg80211: World regulatory domain updated:
[ 6.637162] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.637165] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.637167] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.637168] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.637170] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.637171] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.720845] Console: switching to colour frame buffer device 170x48
[ 6.730685] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.730689] i915 0000:00:02.0: registered panic notifier
[ 6.737077] acpi device:32: registered as cooling_device4
[ 6.744971] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.745117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 6.745284] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.745487] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.769535] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 6.783204] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 6.853920] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[ 6.954965] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.955174] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.955382] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.816443] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9.154956] Adding 7812092k swap on /dev/sda3. Priority:-1 extents:1 across:7812092k
[ 9.185143] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.555327] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.772755] fuse init (API version 7.21)
[ 9.818978] loop: module loaded
[ 11.098949] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.318707] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 11.958745] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.019868] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.152283] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.998903] RPC: Registered named UNIX socket transport module.
[ 12.998907] RPC: Registered udp transport module.
[ 12.998908] RPC: Registered tcp transport module.
[ 12.998910] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.040380] FS-Cache: Loaded
[ 13.049167] Key type dns_resolver registered
[ 13.094423] FS-Cache: Netfs 'nfs' registered for caching
[ 13.149149] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.687582] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 18.208423] Bluetooth: Core ver 2.16
[ 18.208451] NET: Registered protocol family 31
[ 18.208453] Bluetooth: HCI device and connection manager initialized
[ 18.208461] Bluetooth: HCI socket layer initialized
[ 18.208463] Bluetooth: L2CAP socket layer initialized
[ 18.208468] Bluetooth: SCO socket layer initialized
[ 18.472992] Bluetooth: RFCOMM TTY layer initialized
[ 18.473008] Bluetooth: RFCOMM socket layer initialized
[ 18.473010] Bluetooth: RFCOMM ver 1.11
[ 18.706315] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.706319] Bluetooth: BNEP filters: protocol multicast
[ 18.706329] Bluetooth: BNEP socket layer initialized
[ 18.940152] lp: driver loaded but no devices found
[ 18.957113] ppdev: user-space parallel port driver
[ 21.785758] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.789389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.658989] Ebtables v2.0 registered
[ 24.082242] wlan0: authenticate with c0:ac:54:01:79:82
[ 24.100455] wlan0: send auth to c0:ac:54:01:79:82 (try 1/3)
[ 24.103316] wlan0: authenticated
[ 24.103675] wlan0: associate with c0:ac:54:01:79:82 (try 1/3)
[ 24.107726] wlan0: RX AssocResp from c0:ac:54:01:79:82 (capab=0x431 status=0 aid=1)
[ 24.107812] wlan0: associated
[ 24.107820] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.107932] cfg80211: Calling CRDA for country: ES
[ 24.114355] ath: regdomain 0x82d4 updated by CountryIE
[ 24.114364] ath: EEPROM regdomain: 0x82d4
[ 24.114368] ath: EEPROM indicates we should expect a country code
[ 24.114373] ath: doing EEPROM country->regdmn map search
[ 24.114377] ath: country maps to regdmn code: 0x37
[ 24.114381] ath: Country alpha2 being used: ES
[ 24.114385] ath: Regpair used: 0x37
[ 24.114415] cfg80211: Regulatory domain changed to country: ES
[ 24.114419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.114425] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.114430] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.114434] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.114439] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 25.308006] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16806 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0
[ 33.446655] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16807 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0
[ 53.944982] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16808 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0
[ 94.677901] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16809 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0
[ 165.303805] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: X55CR
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: X55CR.404
board_vendor: ASUSTeK COMPUTER INC.
board_name: X55CR
board_version: 1.0
** Loaded modules:
ebtable_nat
ebtables
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
nls_utf8
nls_cp437
vfat
fat
loop
fuse
snd_hda_codec_hdmi
joydev
snd_hda_codec_via
arc4
ath9k
ath9k_common
ath9k_hw
uvcvideo
ath
asus_wmi
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
mac80211
snd_hda_intel
snd_hda_codec
cfg80211
sparse_keymap
snd_hwdep
rfkill
videodev
i915
drm_kms_helper
drm
snd_pcm_oss
snd_mixer_oss
media
acpi_cpufreq
i2c_algo_bit
psmouse
snd_pcm
iTCO_wdt
iTCO_vendor_support
coretemp
mperf
i2c_i801
pcspkr
serio_raw
mei
efivars
i2c_core
lpc_ich
processor
mfd_core
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
video
evdev
kvm_intel
battery
kvm
snd_seq
crc32c_intel
ghash_clmulni_intel
wmi
button
ac
snd_seq_device
snd_timer
snd
cryptd
soundcore
ext4
crc16
jbd2
mbcache
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
xhci_hcd
ehci_pci
ehci_hcd
alx(C)
microcode
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 08:60:6e:04:49:cc brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether dc:85:de:88:b9:98 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.14/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::de85:deff:fe88:b998/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 1344 12 0 0 0 0 0 0 1344 12 0 0 0 0 0 0
wlan0: 1500860 1287 0 0 0 0 0 0 119856 952 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1346 total packets received
0 forwarded
0 incoming packets discarded
1253 incoming packets delivered
930 requests sent out
40 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
14 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 14
IcmpMsg:
OutType3: 14
Tcp:
25 active connections openings
0 passive connection openings
2 failed connection attempts
3 connection resets received
5 connections established
1103 segments received
719 segments send out
2 segments retransmited
0 bad segments received.
5 resets sent
Udp:
138 packets received
14 packets to unknown port received.
0 packet receive errors
195 packets sent
UdpLite:
TcpExt:
11 TCP sockets finished time wait in fast timer
20 delayed acks sent
Quick ack mode was activated 2 times
873 packet headers predicted
61 acknowledgments not containing data payload received
3 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
2 other TCP timeouts
2 DSACKs sent for old packets
2 DSACKs received
3 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPRcvCoalesce: 604
IpExt:
InNoRoutes: 1
InMcastPkts: 19
OutMcastPkts: 21
InBcastPkts: 49
OutBcastPkts: 43
InOctets: 1493173
OutOctets: 84291
InMcastOctets: 3589
OutMcastOctets: 3669
InBcastOctets: 6975
OutBcastOctets: 6124
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1c33]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Subsystem: AzureWave Device [1a3b:1186]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7d80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:14c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1bcf:2883 Sunplus Innovation Technology Inc.
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: