--- Begin Message ---
Package: linux-image-2.6.32-5-686
Version: 2.6.32-30
When I try to hibernate my laptop, it starts the hibernation process
but quickly the screen goes black. Activity has stopped, and leaving
the machine for a bit doesn't result in it powering off, so I surmise
that it has crashed. This used to work in lenny.
(This is with the "no_console_suspend" kernel command line option,
which I have enabled to try to debug a separate hibernation crash.)
The machine is an IBM Thinkpad R50p, which has a Radeon graphics
chipset. I normally invoke hibernation using a "hibernate" script
which came from an ancient swsusp2 package, but for this test I did
echo disk >/sys/power/state
(from a VC, without having run an X server).
Attached is kern.log for a boot, followed by failed resume (well, as
much of the kern.log as got written to the disk).
I appreciate that this may not be very helpful or informative. If
you'd like to suggest ways to collect more data, please let me know.
Ian.
Mar 10 19:38:39 liberator kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 10 19:38:39 liberator kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 10 19:38:39 liberator kernel: [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
Mar 10 19:38:39 liberator kernel: [ 0.000000] KERNEL supported cpus:
Mar 10 19:38:39 liberator kernel: [ 0.000000] Intel GenuineIntel
Mar 10 19:38:39 liberator kernel: [ 0.000000] AMD AuthenticAMD
Mar 10 19:38:39 liberator kernel: [ 0.000000] NSC Geode by NSC
Mar 10 19:38:39 liberator kernel: [ 0.000000] Cyrix CyrixInstead
Mar 10 19:38:39 liberator kernel: [ 0.000000] Centaur CentaurHauls
Mar 10 19:38:39 liberator kernel: [ 0.000000] Transmeta GenuineTMx86
Mar 10 19:38:39 liberator kernel: [ 0.000000] Transmeta TransmetaCPU
Mar 10 19:38:39 liberator kernel: [ 0.000000] UMC UMC UMC UMC
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff60000 (usable)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 000000005ff60000 - 000000005ff77000 (ACPI data)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 000000005ff77000 - 000000005ff79000 (ACPI NVS)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
Mar 10 19:38:39 liberator kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Mar 10 19:38:39 liberator kernel: [ 0.000000] DMI present.
Mar 10 19:38:39 liberator kernel: [ 0.000000] last_pfn = 0x5ff60 max_arch_pfn = 0x100000
Mar 10 19:38:39 liberator kernel: [ 0.000000] MTRR default type: uncachable
Mar 10 19:38:39 liberator kernel: [ 0.000000] MTRR fixed ranges enabled:
Mar 10 19:38:39 liberator kernel: [ 0.000000] 00000-9FFFF write-back
Mar 10 19:38:39 liberator kernel: [ 0.000000] A0000-BFFFF uncachable
Mar 10 19:38:39 liberator kernel: [ 0.000000] C0000-CFFFF write-protect
Mar 10 19:38:39 liberator kernel: [ 0.000000] D0000-DBFFF uncachable
Mar 10 19:38:39 liberator kernel: [ 0.000000] DC000-DFFFF write-back
Mar 10 19:38:39 liberator kernel: [ 0.000000] E0000-FFFFF write-protect
Mar 10 19:38:39 liberator kernel: [ 0.000000] MTRR variable ranges enabled:
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back
Mar 10 19:38:39 liberator kernel: [ 0.000000] 1 base 040000000 mask FE0000000 write-back
Mar 10 19:38:39 liberator kernel: [ 0.000000] 2 base 05FF80000 mask FFFF80000 uncachable
Mar 10 19:38:39 liberator kernel: [ 0.000000] 3 disabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] 4 disabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] 5 disabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] 6 disabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] 7 disabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] PAT not supported by CPU.
Mar 10 19:38:39 liberator kernel: [ 0.000000] initial memory mapped : 0 - 01800000
Mar 10 19:38:39 liberator kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0000400000 - 0037000000 page 2M
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0037000000 - 00373fe000 page 4k
Mar 10 19:38:39 liberator kernel: [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
Mar 10 19:38:39 liberator kernel: [ 0.000000] RAMDISK: 3764d000 - 37fefb49
Mar 10 19:38:39 liberator kernel: [ 0.000000] Allocated new RAMDISK: 00100000 - 00aa2b49
Mar 10 19:38:39 liberator kernel: [ 0.000000] Move RAMDISK from 000000003764d000 - 0000000037fefb48 to 00100000 - 00aa2b48
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM )
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: XSDT 5ff6a6bd 0004C (v01 IBM TP-1R 00003210 LTP 00000000)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: FACP 5ff6a800 000F4 (v03 IBM TP-1R 00003210 IBM 00000001)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: DSDT 5ff6a9e7 0C4E5 (v01 IBM TP-1R 00003210 MSFT 0100000E)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: FACS 5ff78000 00040
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: SSDT 5ff6a9b4 00033 (v01 IBM TP-1R 00003210 MSFT 0100000E)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: ECDT 5ff76ecc 00052 (v01 IBM TP-1R 00003210 IBM 00000001)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: TCPA 5ff76f1e 00032 (v01 IBM TP-1R 00003210 PTL 00000001)
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: BOOT 5ff76fd8 00028 (v01 IBM TP-1R 00003210 LTP 00000001)
Mar 10 19:38:39 liberator kernel: [ 0.000000] 651MB HIGHMEM available.
Mar 10 19:38:39 liberator kernel: [ 0.000000] 883MB LOWMEM available.
Mar 10 19:38:39 liberator kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Mar 10 19:38:39 liberator kernel: [ 0.000000] low ram: 0 - 373fe000
Mar 10 19:38:39 liberator kernel: [ 0.000000] node 0 low ram: 00000000 - 373fe000
Mar 10 19:38:39 liberator kernel: [ 0.000000] node 0 bootmap 00009000 - 0000fe80
Mar 10 19:38:39 liberator kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #5 [00014ca000 - 00014d0128] BRK ==> [00014ca000 - 00014d0128]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #7 [0000100000 - 0000aa2b49] NEW RAMDISK ==> [0000100000 - 0000aa2b49]
Mar 10 19:38:39 liberator kernel: [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Mar 10 19:38:39 liberator kernel: [ 0.000000] Zone PFN ranges:
Mar 10 19:38:39 liberator kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Mar 10 19:38:39 liberator kernel: [ 0.000000] Normal 0x00001000 -> 0x000373fe
Mar 10 19:38:39 liberator kernel: [ 0.000000] HighMem 0x000373fe -> 0x0005ff60
Mar 10 19:38:39 liberator kernel: [ 0.000000] Movable zone start PFN for each node
Mar 10 19:38:39 liberator kernel: [ 0.000000] early_node_map[2] active PFN ranges
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f
Mar 10 19:38:39 liberator kernel: [ 0.000000] 0: 0x00000100 -> 0x0005ff60
Mar 10 19:38:39 liberator kernel: [ 0.000000] On node 0 totalpages: 392959
Mar 10 19:38:39 liberator kernel: [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000
Mar 10 19:38:39 liberator kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Mar 10 19:38:39 liberator kernel: [ 0.000000] DMA zone: 0 pages reserved
Mar 10 19:38:39 liberator kernel: [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
Mar 10 19:38:39 liberator kernel: [ 0.000000] Normal zone: 1736 pages used for memmap
Mar 10 19:38:39 liberator kernel: [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
Mar 10 19:38:39 liberator kernel: [ 0.000000] HighMem zone: 1303 pages used for memmap
Mar 10 19:38:39 liberator kernel: [ 0.000000] HighMem zone: 165451 pages, LIFO batch:31
Mar 10 19:38:39 liberator kernel: [ 0.000000] Using APIC driver default
Mar 10 19:38:39 liberator kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Mar 10 19:38:39 liberator kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Mar 10 19:38:39 liberator kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Mar 10 19:38:39 liberator kernel: [ 0.000000] APIC: disable apic facility
Mar 10 19:38:39 liberator kernel: [ 0.000000] nr_irqs_gsi: 16
Mar 10 19:38:39 liberator kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 10 19:38:39 liberator kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
Mar 10 19:38:39 liberator kernel: [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
Mar 10 19:38:39 liberator kernel: [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
Mar 10 19:38:39 liberator kernel: [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Mar 10 19:38:39 liberator kernel: [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9f800000)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Mar 10 19:38:39 liberator kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
Mar 10 19:38:39 liberator kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s34296 r0 d23048 u4194304
Mar 10 19:38:39 liberator kernel: [ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304
Mar 10 19:38:39 liberator kernel: [ 0.000000] pcpu-alloc: [0] 0
Mar 10 19:38:39 liberator kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389888
Mar 10 19:38:39 liberator kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg--liberator-lv--root ro acpi_sleep=s3_bios ROOTDELAY=20 resume=/dev/mapper/vg--liberator-lv--swap no_console_suspend
Mar 10 19:38:39 liberator kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Mar 10 19:38:39 liberator kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Mar 10 19:38:39 liberator kernel: [ 0.000000] Initializing CPU#0
Mar 10 19:38:39 liberator kernel: [ 0.000000] Initializing HighMem for node 0 (000373fe:0005ff60)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Memory: 1542996k/1572224k available (2501k kernel code, 28004k reserved, 1323k data, 376k init, 667016k highmem)
Mar 10 19:38:39 liberator kernel: [ 0.000000] virtual kernel memory layout:
Mar 10 19:38:39 liberator kernel: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB)
Mar 10 19:38:39 liberator kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mar 10 19:38:39 liberator kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mar 10 19:38:39 liberator kernel: [ 0.000000] Hierarchical RCU implementation.
Mar 10 19:38:39 liberator kernel: [ 0.000000] NR_IRQS:1280
Mar 10 19:38:39 liberator kernel: [ 0.000000] Extended CMOS year: 2000
Mar 10 19:38:39 liberator kernel: [ 0.000000] Console: colour VGA+ 80x25
Mar 10 19:38:39 liberator kernel: [ 0.000000] console [tty0] enabled
Mar 10 19:38:39 liberator kernel: [ 0.000000] Fast TSC calibration using PIT
Mar 10 19:38:39 liberator kernel: [ 0.000000] Detected 1594.794 MHz processor.
Mar 10 19:38:39 liberator kernel: [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.58 BogoMIPS (lpj=6379176)
Mar 10 19:38:39 liberator kernel: [ 0.008103] Security Framework initialized
Mar 10 19:38:39 liberator kernel: [ 0.008147] SELinux: Disabled at boot.
Mar 10 19:38:39 liberator kernel: [ 0.008189] Mount-cache hash table entries: 512
Mar 10 19:38:39 liberator kernel: [ 0.008407] Initializing cgroup subsys ns
Mar 10 19:38:39 liberator kernel: [ 0.008446] Initializing cgroup subsys cpuacct
Mar 10 19:38:39 liberator kernel: [ 0.008483] Initializing cgroup subsys devices
Mar 10 19:38:39 liberator kernel: [ 0.008519] Initializing cgroup subsys freezer
Mar 10 19:38:39 liberator kernel: [ 0.008555] Initializing cgroup subsys net_cls
Mar 10 19:38:39 liberator kernel: [ 0.008622] CPU: L1 I cache: 32K, L1 D cache: 32K
Mar 10 19:38:39 liberator kernel: [ 0.008681] CPU: L2 cache: 1024K
Mar 10 19:38:39 liberator kernel: [ 0.008718] mce: CPU supports 5 MCE banks
Mar 10 19:38:39 liberator kernel: [ 0.008772] Performance Events:
Mar 10 19:38:39 liberator kernel: [ 0.008800] no APIC, boot with the "lapic" boot parameter to force-enable it.
Mar 10 19:38:39 liberator kernel: [ 0.008866] no hardware sampling interrupt available.
Mar 10 19:38:39 liberator kernel: [ 0.008902] p6 PMU driver.
Mar 10 19:38:39 liberator kernel: [ 0.008938] ... version: 0
Mar 10 19:38:39 liberator kernel: [ 0.008973] ... bit width: 32
Mar 10 19:38:39 liberator kernel: [ 0.009008] ... generic registers: 2
Mar 10 19:38:39 liberator kernel: [ 0.009042] ... value mask: 00000000ffffffff
Mar 10 19:38:39 liberator kernel: [ 0.009079] ... max period: 000000007fffffff
Mar 10 19:38:39 liberator kernel: [ 0.009115] ... fixed-purpose events: 0
Mar 10 19:38:39 liberator kernel: [ 0.009149] ... event mask: 0000000000000003
Mar 10 19:38:39 liberator kernel: [ 0.009189] Checking 'hlt' instruction... OK.
Mar 10 19:38:39 liberator kernel: [ 0.024491] SMP alternatives: switching to UP code
Mar 10 19:38:39 liberator kernel: [ 0.028773] Freeing SMP alternatives: 13k freed
Mar 10 19:38:39 liberator kernel: [ 0.028815] ACPI: Core revision 20090903
Mar 10 19:38:39 liberator kernel: [ 0.042842] ACPI: setting ELCR to 0200 (from 0800)
Mar 10 19:38:39 liberator kernel: [ 0.044082] Enabling APIC mode: Flat. Using 0 I/O APICs
Mar 10 19:38:39 liberator kernel: [ 0.044120] weird, boot CPU (#0) not listed by the BIOS.
Mar 10 19:38:39 liberator kernel: [ 0.044156] SMP motherboard not detected.
Mar 10 19:38:39 liberator kernel: [ 0.044190] Local APIC not detected. Using dummy APIC emulation.
Mar 10 19:38:39 liberator kernel: [ 0.044227] SMP disabled
Mar 10 19:38:39 liberator kernel: [ 0.044478] Brought up 1 CPUs
Mar 10 19:38:39 liberator kernel: [ 0.044514] Total of 1 processors activated (3189.58 BogoMIPS).
Mar 10 19:38:39 liberator kernel: [ 0.048045] CPU0 attaching NULL sched-domain.
Mar 10 19:38:39 liberator kernel: [ 0.048185] devtmpfs: initialized
Mar 10 19:38:39 liberator kernel: [ 0.048771] regulator: core version 0.5
Mar 10 19:38:39 liberator kernel: [ 0.048866] NET: Registered protocol family 16
Mar 10 19:38:39 liberator kernel: [ 0.049007] ACPI: bus type pci registered
Mar 10 19:38:39 liberator kernel: [ 0.049335] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
Mar 10 19:38:39 liberator kernel: [ 0.049373] PCI: Using configuration type 1 for base access
Mar 10 19:38:39 liberator kernel: [ 0.049851] bio: create slab <bio-0> at 0
Mar 10 19:38:39 liberator kernel: [ 0.050943] ACPI: EC: EC description table is found, configuring boot EC
Mar 10 19:38:39 liberator kernel: [ 0.061424] ACPI: Interpreter enabled
Mar 10 19:38:39 liberator kernel: [ 0.061461] ACPI: (supports S0 S3 S4 S5)
Mar 10 19:38:39 liberator kernel: [ 0.061604] ACPI: Using PIC for interrupt routing
Mar 10 19:38:39 liberator kernel: [ 0.069545] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Mar 10 19:38:39 liberator kernel: [ 0.069545] ACPI: Power Resource [PUBS] (on)
Mar 10 19:38:39 liberator kernel: [ 0.073009] ACPI: ACPI Dock Station Driver: 3 docks/bays found
Mar 10 19:38:39 liberator kernel: [ 0.073070] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 10 19:38:39 liberator kernel: [ 0.073150] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
Mar 10 19:38:39 liberator kernel: [ 0.073265] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
Mar 10 19:38:39 liberator kernel: [ 0.073319] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
Mar 10 19:38:39 liberator kernel: [ 0.073374] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
Mar 10 19:38:39 liberator kernel: [ 0.073435] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff]
Mar 10 19:38:39 liberator kernel: [ 0.073492] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.073532] pci 0000:00:1d.7: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.073655] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
Mar 10 19:38:39 liberator kernel: [ 0.073703] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
Mar 10 19:38:39 liberator kernel: [ 0.073763] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Mar 10 19:38:39 liberator kernel: [ 0.073771] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Mar 10 19:38:39 liberator kernel: [ 0.073779] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Mar 10 19:38:39 liberator kernel: [ 0.073787] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Mar 10 19:38:39 liberator kernel: [ 0.073794] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
Mar 10 19:38:39 liberator kernel: [ 0.073802] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
Mar 10 19:38:39 liberator kernel: [ 0.073854] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
Mar 10 19:38:39 liberator kernel: [ 0.073899] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
Mar 10 19:38:39 liberator kernel: [ 0.073906] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
Mar 10 19:38:39 liberator kernel: [ 0.073914] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff]
Mar 10 19:38:39 liberator kernel: [ 0.073922] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff]
Mar 10 19:38:39 liberator kernel: [ 0.073951] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.073990] pci 0000:00:1f.5: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.074053] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
Mar 10 19:38:39 liberator kernel: [ 0.074061] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
Mar 10 19:38:39 liberator kernel: [ 0.074098] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.074137] pci 0000:00:1f.6: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.074206] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
Mar 10 19:38:39 liberator kernel: [ 0.074213] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
Mar 10 19:38:39 liberator kernel: [ 0.074220] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
Mar 10 19:38:39 liberator kernel: [ 0.074236] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Mar 10 19:38:39 liberator kernel: [ 0.074255] pci 0000:01:00.0: supports D1 D2
Mar 10 19:38:39 liberator kernel: [ 0.074295] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
Mar 10 19:38:39 liberator kernel: [ 0.074300] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
Mar 10 19:38:39 liberator kernel: [ 0.074304] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
Mar 10 19:38:39 liberator kernel: [ 0.074341] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
Mar 10 19:38:39 liberator kernel: [ 0.074360] pci 0000:02:00.0: supports D1 D2
Mar 10 19:38:39 liberator kernel: [ 0.074363] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.074403] pci 0000:02:00.0: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.074470] pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff]
Mar 10 19:38:39 liberator kernel: [ 0.074490] pci 0000:02:00.1: supports D1 D2
Mar 10 19:38:39 liberator kernel: [ 0.074493] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.074532] pci 0000:02:00.1: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.074615] pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff]
Mar 10 19:38:39 liberator kernel: [ 0.074624] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff]
Mar 10 19:38:39 liberator kernel: [ 0.074632] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f]
Mar 10 19:38:39 liberator kernel: [ 0.074652] pci 0000:02:01.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
Mar 10 19:38:39 liberator kernel: [ 0.074676] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
Mar 10 19:38:39 liberator kernel: [ 0.074715] pci 0000:02:01.0: PME# disabled
Mar 10 19:38:39 liberator kernel: [ 0.074787] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0214000-0xc0214fff]
Mar 10 19:38:39 liberator kernel: [ 0.074871] pci 0000:00:1e.0: transparent bridge
Mar 10 19:38:39 liberator kernel: [ 0.076007] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
Mar 10 19:38:39 liberator kernel: [ 0.076013] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
Mar 10 19:38:39 liberator kernel: [ 0.076019] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
Mar 10 19:38:39 liberator kernel: [ 0.076060] pci_bus 0000:00: on NUMA node 0
Mar 10 19:38:39 liberator kernel: [ 0.076065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 10 19:38:39 liberator kernel: [ 0.076122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Mar 10 19:38:39 liberator kernel: [ 0.076153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Mar 10 19:38:39 liberator kernel: [ 0.080955] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
Mar 10 19:38:39 liberator kernel: [ 0.081414] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
Mar 10 19:38:39 liberator kernel: [ 0.081869] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Mar 10 19:38:39 liberator kernel: [ 0.082325] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Mar 10 19:38:39 liberator kernel: [ 0.082759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Mar 10 19:38:39 liberator kernel: [ 0.083247] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Mar 10 19:38:39 liberator kernel: [ 0.083734] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Mar 10 19:38:39 liberator kernel: [ 0.084232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Mar 10 19:38:39 liberator kernel: [ 0.084621] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar 10 19:38:39 liberator kernel: [ 0.084670] vgaarb: loaded
Mar 10 19:38:39 liberator kernel: [ 0.084770] PCI: Using ACPI for IRQ routing
Mar 10 19:38:39 liberator kernel: [ 0.085112] Switching to clocksource tsc
Mar 10 19:38:39 liberator kernel: [ 0.086820] pnp: PnP ACPI init
Mar 10 19:38:39 liberator kernel: [ 0.086870] ACPI: bus type pnp registered
Mar 10 19:38:39 liberator kernel: [ 0.089408] pnp: PnP ACPI: found 13 devices
Mar 10 19:38:39 liberator kernel: [ 0.089444] ACPI: ACPI bus type pnp unregistered
Mar 10 19:38:39 liberator kernel: [ 0.089481] PnPBIOS: Disabled by ACPI PNP
Mar 10 19:38:39 liberator kernel: [ 0.089526] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089565] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089605] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089644] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089683] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089722] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089761] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089801] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089840] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089879] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089918] system 00:00: iomem range 0xec000-0xeffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089957] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.089997] system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.090044] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
Mar 10 19:38:39 liberator kernel: [ 0.090095] system 00:02: ioport range 0x1000-0x107f has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.090134] system 00:02: ioport range 0x1180-0x11bf has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.090173] system 00:02: ioport range 0x15e0-0x15ef has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.090212] system 00:02: ioport range 0x1600-0x162f has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.090250] system 00:02: ioport range 0x1632-0x167f has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.090289] system 00:02: ioport range 0x1630-0x1631 has been reserved
Mar 10 19:38:39 liberator kernel: [ 0.125064] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Mar 10 19:38:39 liberator kernel: [ 0.125102] pci 0000:00:01.0: IO window: 0x3000-0x3fff
Mar 10 19:38:39 liberator kernel: [ 0.125141] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
Mar 10 19:38:39 liberator kernel: [ 0.125180] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
Mar 10 19:38:39 liberator kernel: [ 0.125225] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
Mar 10 19:38:39 liberator kernel: [ 0.125263] pci 0000:02:00.0: IO window: 0x004000-0x0040ff
Mar 10 19:38:39 liberator kernel: [ 0.125302] pci 0000:02:00.0: IO window: 0x004400-0x0044ff
Mar 10 19:38:39 liberator kernel: [ 0.125341] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
Mar 10 19:38:39 liberator kernel: [ 0.125381] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
Mar 10 19:38:39 liberator kernel: [ 0.125420] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
Mar 10 19:38:39 liberator kernel: [ 0.125457] pci 0000:02:00.1: IO window: 0x004800-0x0048ff
Mar 10 19:38:39 liberator kernel: [ 0.125496] pci 0000:02:00.1: IO window: 0x004c00-0x004cff
Mar 10 19:38:39 liberator kernel: [ 0.125535] pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff
Mar 10 19:38:39 liberator kernel: [ 0.125575] pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff
Mar 10 19:38:39 liberator kernel: [ 0.125615] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
Mar 10 19:38:39 liberator kernel: [ 0.125653] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
Mar 10 19:38:39 liberator kernel: [ 0.125693] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
Mar 10 19:38:39 liberator kernel: [ 0.125732] pci 0000:00:1e.0: PREFETCH window: 0xe8000000-0xefffffff
Mar 10 19:38:39 liberator kernel: [ 0.125784] pci 0000:00:1e.0: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 0.126154] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Mar 10 19:38:39 liberator kernel: [ 0.126191] PCI: setting IRQ 11 as level-triggered
Mar 10 19:38:39 liberator kernel: [ 0.126197] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 0.126592] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Mar 10 19:38:39 liberator kernel: [ 0.126631] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 0.126683] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Mar 10 19:38:39 liberator kernel: [ 0.126687] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126691] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
Mar 10 19:38:39 liberator kernel: [ 0.126695] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
Mar 10 19:38:39 liberator kernel: [ 0.126699] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126703] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
Mar 10 19:38:39 liberator kernel: [ 0.126706] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126710] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126714] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
Mar 10 19:38:39 liberator kernel: [ 0.126717] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126721] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
Mar 10 19:38:39 liberator kernel: [ 0.126725] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
Mar 10 19:38:39 liberator kernel: [ 0.126728] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126732] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126736] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
Mar 10 19:38:39 liberator kernel: [ 0.126739] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
Mar 10 19:38:39 liberator kernel: [ 0.126743] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126747] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
Mar 10 19:38:39 liberator kernel: [ 0.126789] NET: Registered protocol family 2
Mar 10 19:38:39 liberator kernel: [ 0.126949] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.127432] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.128910] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.129944] TCP: Hash tables configured (established 131072 bind 65536)
Mar 10 19:38:39 liberator kernel: [ 0.129985] TCP reno registered
Mar 10 19:38:39 liberator kernel: [ 0.130174] NET: Registered protocol family 1
Mar 10 19:38:39 liberator kernel: [ 0.130322] pci 0000:01:00.0: Boot video device
Mar 10 19:38:39 liberator kernel: [ 0.130412] Unpacking initramfs...
Mar 10 19:38:39 liberator kernel: [ 0.511222] Freeing initrd memory: 9866k freed
Mar 10 19:38:39 liberator kernel: [ 0.525273] Simple Boot Flag at 0x35 set to 0x1
Mar 10 19:38:39 liberator kernel: [ 0.525631] audit: initializing netlink socket (disabled)
Mar 10 19:38:39 liberator kernel: [ 0.525690] type=2000 audit(1299785897.522:1): initialized
Mar 10 19:38:39 liberator kernel: [ 0.531148] highmem bounce pool size: 64 pages
Mar 10 19:38:39 liberator kernel: [ 0.531190] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Mar 10 19:38:39 liberator kernel: [ 0.533305] VFS: Disk quotas dquot_6.5.2
Mar 10 19:38:39 liberator kernel: [ 0.533418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 10 19:38:39 liberator kernel: [ 0.533558] msgmni has been set to 1731
Mar 10 19:38:39 liberator kernel: [ 0.533842] alg: No test for stdrng (krng)
Mar 10 19:38:39 liberator kernel: [ 0.533948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 10 19:38:39 liberator kernel: [ 0.533996] io scheduler noop registered
Mar 10 19:38:39 liberator kernel: [ 0.534030] io scheduler anticipatory registered
Mar 10 19:38:39 liberator kernel: [ 0.534066] io scheduler deadline registered
Mar 10 19:38:39 liberator kernel: [ 0.534153] io scheduler cfq registered (default)
Mar 10 19:38:39 liberator kernel: [ 0.534411] isapnp: Scanning for PnP cards...
Mar 10 19:38:39 liberator kernel: [ 0.887324] isapnp: No Plug & Play device found
Mar 10 19:38:39 liberator kernel: [ 0.889075] Linux agpgart interface v0.103
Mar 10 19:38:39 liberator kernel: [ 0.889196] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
Mar 10 19:38:39 liberator kernel: [ 0.902606] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Mar 10 19:38:39 liberator kernel: [ 0.902735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 10 19:38:39 liberator kernel: [ 0.903738] serial 00:0a: activated
Mar 10 19:38:39 liberator kernel: [ 0.903885] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
Mar 10 19:38:39 liberator kernel: [ 0.904024] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 0.904075] serial 0000:00:1f.6: PCI INT B disabled
Mar 10 19:38:39 liberator kernel: [ 0.904214] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Mar 10 19:38:39 liberator kernel: [ 0.910296] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 10 19:38:39 liberator kernel: [ 0.910340] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 10 19:38:39 liberator kernel: [ 0.910485] mice: PS/2 mouse device common for all mice
Mar 10 19:38:39 liberator kernel: [ 0.910577] rtc_cmos 00:06: RTC can wake from S4
Mar 10 19:38:39 liberator kernel: [ 0.910657] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Mar 10 19:38:39 liberator kernel: [ 0.910709] rtc0: alarms up to one month, y3k, 114 bytes nvram
Mar 10 19:38:39 liberator kernel: [ 0.910758] cpuidle: using governor ladder
Mar 10 19:38:39 liberator kernel: [ 0.910793] cpuidle: using governor menu
Mar 10 19:38:39 liberator kernel: [ 0.910830] No iBFT detected.
Mar 10 19:38:39 liberator kernel: [ 0.911411] TCP cubic registered
Mar 10 19:38:39 liberator kernel: [ 0.911669] NET: Registered protocol family 10
Mar 10 19:38:39 liberator kernel: [ 0.912343] lo: Disabled Privacy Extensions
Mar 10 19:38:39 liberator kernel: [ 0.912833] Mobile IPv6
Mar 10 19:38:39 liberator kernel: [ 0.912867] NET: Registered protocol family 17
Mar 10 19:38:39 liberator kernel: [ 0.912920] Using IPI No-Shortcut mode
Mar 10 19:38:39 liberator kernel: [ 0.913031] PM: Checking image partition /dev/mapper/vg--liberator-lv--swap
Mar 10 19:38:39 liberator kernel: [ 0.913661] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Mar 10 19:38:39 liberator kernel: [ 0.918624] PM: Resume from disk failed.
Mar 10 19:38:39 liberator kernel: [ 0.918642] registered taskstats version 1
Mar 10 19:38:39 liberator kernel: [ 0.918960] rtc_cmos 00:06: setting system clock to 2011-03-10 19:38:18 UTC (1299785898)
Mar 10 19:38:39 liberator kernel: [ 0.919038] Initalizing network drop monitor service
Mar 10 19:38:39 liberator kernel: [ 0.919097] Freeing unused kernel memory: 376k freed
Mar 10 19:38:39 liberator kernel: [ 0.919367] Write protecting the kernel text: 2504k
Mar 10 19:38:39 liberator kernel: [ 0.919425] Write protecting the kernel read-only data: 920k
Mar 10 19:38:39 liberator kernel: [ 0.947002] udev[49]: starting version 164
Mar 10 19:38:39 liberator kernel: [ 1.174246] SCSI subsystem initialized
Mar 10 19:38:39 liberator kernel: [ 1.178397] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Mar 10 19:38:39 liberator kernel: [ 1.178436] Copyright (c) 1999-2006 Intel Corporation.
Mar 10 19:38:39 liberator kernel: [ 1.178515] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.478376] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:89:eb:c2
Mar 10 19:38:39 liberator kernel: [ 1.479126] Floppy drive(s): fd0 is 1.44M
Mar 10 19:38:39 liberator kernel: [ 1.479483] usbcore: registered new interface driver usbfs
Mar 10 19:38:39 liberator kernel: [ 1.479688] usbcore: registered new interface driver hub
Mar 10 19:38:39 liberator kernel: [ 1.481500] usbcore: registered new device driver usb
Mar 10 19:38:39 liberator kernel: [ 1.490343] libata version 3.00 loaded.
Mar 10 19:38:39 liberator kernel: [ 1.497840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 10 19:38:39 liberator kernel: [ 1.498069] thermal LNXTHERM:01: registered as thermal_zone0
Mar 10 19:38:39 liberator kernel: [ 1.498114] ACPI: Thermal Zone [THM0] (50 C)
Mar 10 19:38:39 liberator kernel: [ 1.498525] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.498759] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.499163] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.499203] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.499266] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 1.499271] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.499331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Mar 10 19:38:39 liberator kernel: [ 1.499409] ehci_hcd 0000:00:1d.7: debug port 1
Mar 10 19:38:39 liberator kernel: [ 1.503331] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Mar 10 19:38:39 liberator kernel: [ 1.503724] FDC 0 is a National Semiconductor PC87306
Mar 10 19:38:39 liberator kernel: [ 1.508609] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
Mar 10 19:38:39 liberator kernel: [ 1.524021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mar 10 19:38:39 liberator kernel: [ 1.524106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 10 19:38:39 liberator kernel: [ 1.524145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 10 19:38:39 liberator kernel: [ 1.524191] usb usb1: Product: EHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.524227] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Mar 10 19:38:39 liberator kernel: [ 1.524264] usb usb1: SerialNumber: 0000:00:1d.7
Mar 10 19:38:39 liberator kernel: [ 1.524410] usb usb1: configuration #1 chosen from 1 choice
Mar 10 19:38:39 liberator kernel: [ 1.524485] hub 1-0:1.0: USB hub found
Mar 10 19:38:39 liberator kernel: [ 1.524528] hub 1-0:1.0: 6 ports detected
Mar 10 19:38:39 liberator kernel: [ 1.528851] ata_piix 0000:00:1f.1: version 2.13
Mar 10 19:38:39 liberator kernel: [ 1.528867] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Mar 10 19:38:39 liberator kernel: [ 1.529332] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.529372] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.529467] ata_piix 0000:00:1f.1: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 1.538700] scsi0 : ata_piix
Mar 10 19:38:39 liberator kernel: [ 1.538911] scsi1 : ata_piix
Mar 10 19:38:39 liberator kernel: [ 1.539860] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
Mar 10 19:38:39 liberator kernel: [ 1.539899] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
Mar 10 19:38:39 liberator kernel: [ 1.540380] uhci_hcd: USB Universal Host Controller Interface driver
Mar 10 19:38:39 liberator kernel: [ 1.540706] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.540956] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.540999] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.541052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 1.541056] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.541817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 10 19:38:39 liberator kernel: [ 1.541885] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
Mar 10 19:38:39 liberator kernel: [ 1.541981] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 10 19:38:39 liberator kernel: [ 1.542020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 10 19:38:39 liberator kernel: [ 1.542066] usb usb2: Product: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.542101] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Mar 10 19:38:39 liberator kernel: [ 1.542138] usb usb2: SerialNumber: 0000:00:1d.0
Mar 10 19:38:39 liberator kernel: [ 1.542321] usb usb2: configuration #1 chosen from 1 choice
Mar 10 19:38:39 liberator kernel: [ 1.542434] hub 2-0:1.0: USB hub found
Mar 10 19:38:39 liberator kernel: [ 1.542476] hub 2-0:1.0: 2 ports detected
Mar 10 19:38:39 liberator kernel: [ 1.542726] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.542932] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 1.543327] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.543366] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.543416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 1.543421] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.543466] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Mar 10 19:38:39 liberator kernel: [ 1.543531] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
Mar 10 19:38:39 liberator kernel: [ 1.543609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar 10 19:38:39 liberator kernel: [ 1.543647] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 10 19:38:39 liberator kernel: [ 1.543693] usb usb3: Product: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.543729] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Mar 10 19:38:39 liberator kernel: [ 1.543766] usb usb3: SerialNumber: 0000:00:1d.1
Mar 10 19:38:39 liberator kernel: [ 1.543921] usb usb3: configuration #1 chosen from 1 choice
Mar 10 19:38:39 liberator kernel: [ 1.544052] hub 3-0:1.0: USB hub found
Mar 10 19:38:39 liberator kernel: [ 1.544093] hub 3-0:1.0: 2 ports detected
Mar 10 19:38:39 liberator kernel: [ 1.544180] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 1.544231] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 1.544235] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.544283] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mar 10 19:38:39 liberator kernel: [ 1.544348] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
Mar 10 19:38:39 liberator kernel: [ 1.544426] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Mar 10 19:38:39 liberator kernel: [ 1.544464] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 10 19:38:39 liberator kernel: [ 1.544510] usb usb4: Product: UHCI Host Controller
Mar 10 19:38:39 liberator kernel: [ 1.544546] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Mar 10 19:38:39 liberator kernel: [ 1.544583] usb usb4: SerialNumber: 0000:00:1d.2
Mar 10 19:38:39 liberator kernel: [ 1.544737] usb usb4: configuration #1 chosen from 1 choice
Mar 10 19:38:39 liberator kernel: [ 1.544846] hub 4-0:1.0: USB hub found
Mar 10 19:38:39 liberator kernel: [ 1.544887] hub 4-0:1.0: 2 ports detected
Mar 10 19:38:39 liberator kernel: [ 1.545909] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Mar 10 19:38:39 liberator kernel: [ 1.745805] ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
Mar 10 19:38:39 liberator kernel: [ 1.745850] ata1.00: 625142448 sectors, multi 16: LBA48
Mar 10 19:38:39 liberator kernel: [ 1.760456] ata1.00: configured for UDMA/100
Mar 10 19:38:39 liberator kernel: [ 1.760633] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
Mar 10 19:38:39 liberator kernel: [ 1.781588] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Mar 10 19:38:39 liberator kernel: [ 1.781706] sd 0:0:0:0: [sda] Write Protect is off
Mar 10 19:38:39 liberator kernel: [ 1.781743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 10 19:38:39 liberator kernel: [ 1.781773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 10 19:38:39 liberator kernel: [ 1.781986] sda: sda1 sda2 sda3 sda4
Mar 10 19:38:39 liberator kernel: [ 1.786769] sd 0:0:0:0: [sda] Attached SCSI disk
Mar 10 19:38:39 liberator kernel: [ 1.836033] usb 1-4: new high speed USB device using ehci_hcd and address 2
Mar 10 19:38:39 liberator kernel: [ 2.161047] device-mapper: uevent: version 1.0.3
Mar 10 19:38:39 liberator kernel: [ 2.161687] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Mar 10 19:38:39 liberator kernel: [ 2.469953] usb 1-4: New USB device found, idVendor=090c, idProduct=1000
Mar 10 19:38:39 liberator kernel: [ 2.469995] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 10 19:38:39 liberator kernel: [ 2.470035] usb 1-4: Product: USB Flash Disk
Mar 10 19:38:39 liberator kernel: [ 2.470070] usb 1-4: Manufacturer: General
Mar 10 19:38:39 liberator kernel: [ 2.470105] usb 1-4: SerialNumber: 5810030000052793
Mar 10 19:38:39 liberator kernel: [ 2.470273] usb 1-4: configuration #1 chosen from 1 choice
Mar 10 19:38:39 liberator kernel: [ 2.484704] Initializing USB Mass Storage driver...
Mar 10 19:38:39 liberator kernel: [ 2.484851] scsi2 : SCSI emulation for USB Mass Storage devices
Mar 10 19:38:39 liberator kernel: [ 2.485039] usbcore: registered new interface driver usb-storage
Mar 10 19:38:39 liberator kernel: [ 2.485078] USB Mass Storage support registered.
Mar 10 19:38:39 liberator kernel: [ 2.485660] usb-storage: device found at 2
Mar 10 19:38:39 liberator kernel: [ 2.485663] usb-storage: waiting for device to settle before scanning
Mar 10 19:38:39 liberator kernel: [ 7.484615] usb-storage: device scan complete
Mar 10 19:38:39 liberator kernel: [ 7.514623] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
Mar 10 19:38:39 liberator kernel: [ 7.517467] sd 2:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
Mar 10 19:38:39 liberator kernel: [ 7.519217] sd 2:0:0:0: [sdb] Write Protect is off
Mar 10 19:38:39 liberator kernel: [ 7.519259] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
Mar 10 19:38:39 liberator kernel: [ 7.519263] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar 10 19:38:39 liberator kernel: [ 7.525328] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar 10 19:38:39 liberator kernel: [ 7.525368] sdb: sdb4
Mar 10 19:38:39 liberator kernel: [ 7.531342] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar 10 19:38:39 liberator kernel: [ 7.531386] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Mar 10 19:38:39 liberator kernel: [ 10.705556] PM: Starting manual resume from disk
Mar 10 19:38:39 liberator kernel: [ 10.705605] PM: Resume from partition 254:4
Mar 10 19:38:39 liberator kernel: [ 10.705607] PM: Checking hibernation image.
Mar 10 19:38:39 liberator kernel: [ 10.705951] PM: Error -22 checking image file
Mar 10 19:38:39 liberator kernel: [ 10.705953] PM: Resume from disk failed.
Mar 10 19:38:39 liberator kernel: [ 10.752615] kjournald starting. Commit interval 5 seconds
Mar 10 19:38:39 liberator kernel: [ 10.752662] EXT3-fs: dm-1: orphan cleanup on readonly fs
Mar 10 19:38:39 liberator kernel: [ 10.774532] ext3_orphan_cleanup: deleting unreferenced inode 1885771
Mar 10 19:38:39 liberator kernel: [ 10.785192] EXT3-fs: dm-1: 1 orphan inode deleted
Mar 10 19:38:39 liberator kernel: [ 10.785228] EXT3-fs: recovery complete.
Mar 10 19:38:39 liberator kernel: [ 10.792101] EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 19:38:39 liberator kernel: [ 13.164186] udev[490]: starting version 164
Mar 10 19:38:39 liberator kernel: [ 13.554587] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 10 19:38:39 liberator kernel: [ 13.564323] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Mar 10 19:38:39 liberator kernel: [ 13.564610] ACPI: Lid Switch [LID]
Mar 10 19:38:39 liberator kernel: [ 13.565161] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Mar 10 19:38:39 liberator kernel: [ 13.565217] ACPI: Sleep Button [SLPB]
Mar 10 19:38:39 liberator kernel: [ 13.565402] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Mar 10 19:38:39 liberator kernel: [ 13.565451] ACPI: Power Button [PWRF]
Mar 10 19:38:39 liberator kernel: [ 13.588165] input: PC Speaker as /devices/platform/pcspkr/input/input4
Mar 10 19:38:39 liberator kernel: [ 13.597744] ACPI: AC Adapter [AC] (on-line)
Mar 10 19:38:39 liberator kernel: [ 13.598111] Marking TSC unstable due to TSC halts in idle
Mar 10 19:38:39 liberator kernel: [ 13.599277] processor LNXCPU:00: registered as cooling_device0
Mar 10 19:38:39 liberator kernel: [ 13.607033] Switching to clocksource acpi_pm
Mar 10 19:38:39 liberator kernel: [ 13.623140] Non-volatile memory driver v1.3
Mar 10 19:38:39 liberator kernel: [ 13.629758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 10 19:38:39 liberator kernel: [ 13.638247] ACPI: Battery Slot [BAT0] (battery present)
Mar 10 19:38:39 liberator kernel: [ 13.684090] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5
Mar 10 19:38:39 liberator kernel: [ 13.684248] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Mar 10 19:38:39 liberator kernel: [ 13.770116] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 13.770722] parport_pc 00:0b: reported by Plug and Play ACPI
Mar 10 19:38:39 liberator kernel: [ 13.770799] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Mar 10 19:38:39 liberator kernel: [ 13.772229] intel_rng: FWH not detected
Mar 10 19:38:39 liberator kernel: [ 13.901541] NET: Registered protocol family 23
Mar 10 19:38:39 liberator kernel: [ 14.045158] nsc-ircc 00:0c: activated
Mar 10 19:38:39 liberator kernel: [ 14.045385] nsc-ircc, chip->init
Mar 10 19:38:39 liberator kernel: [ 14.045427] nsc-ircc, Found chip at base=0x02e
Mar 10 19:38:39 liberator kernel: [ 14.045484] nsc-ircc, driver loaded (Dag Brattli)
Mar 10 19:38:39 liberator kernel: [ 14.047097] IrDA: Registered device irda0
Mar 10 19:38:39 liberator kernel: [ 14.047136] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
Mar 10 19:38:39 liberator kernel: [ 14.125452] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
Mar 10 19:38:39 liberator kernel: [ 14.125516] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
Mar 10 19:38:39 liberator kernel: [ 14.125566] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
Mar 10 19:38:39 liberator kernel: [ 14.125610] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
Mar 10 19:38:39 liberator kernel: [ 14.356865] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
Mar 10 19:38:39 liberator kernel: [ 14.356922] yenta_cardbus 0000:02:00.0: Socket status: 30000086
Mar 10 19:38:39 liberator kernel: [ 14.356965] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
Mar 10 19:38:39 liberator kernel: [ 14.357014] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
Mar 10 19:38:39 liberator kernel: [ 14.359050] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
Mar 10 19:38:39 liberator kernel: [ 14.359099] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Mar 10 19:38:39 liberator kernel: [ 14.361162] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
Mar 10 19:38:39 liberator kernel: [ 14.361215] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
Mar 10 19:38:39 liberator kernel: [ 14.361261] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
Mar 10 19:38:39 liberator kernel: [ 14.361301] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
Mar 10 19:38:39 liberator kernel: [ 14.369101] [drm] Initialized drm 1.1.0 20060810
Mar 10 19:38:39 liberator kernel: [ 14.410892] thinkpad_acpi: ThinkPad ACPI Extras v0.23
Mar 10 19:38:39 liberator kernel: [ 14.410935] thinkpad_acpi: http://ibm-acpi.sf.net/
Mar 10 19:38:39 liberator kernel: [ 14.410971] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04
Mar 10 19:38:39 liberator kernel: [ 14.411010] thinkpad_acpi: IBM ThinkPad R50p, model 18322AG
Mar 10 19:38:39 liberator kernel: [ 14.411047] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
Mar 10 19:38:39 liberator kernel: [ 14.411085] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
Mar 10 19:38:39 liberator kernel: [ 14.423073] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
Mar 10 19:38:39 liberator kernel: [ 14.424767] Registered led device: tpacpi::thinklight
Mar 10 19:38:39 liberator kernel: [ 14.424906] Registered led device: tpacpi::power
Mar 10 19:38:39 liberator kernel: [ 14.424963] Registered led device: tpacpi::standby
Mar 10 19:38:39 liberator kernel: [ 14.434425] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
Mar 10 19:38:39 liberator kernel: [ 14.571499] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0
Mar 10 19:38:39 liberator kernel: [ 14.571553] serio: Synaptics pass-through port at isa0060/serio1/input0
Mar 10 19:38:39 liberator kernel: [ 14.610625] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
Mar 10 19:38:39 liberator kernel: [ 14.610670] yenta_cardbus 0000:02:00.1: Socket status: 30000086
Mar 10 19:38:39 liberator kernel: [ 14.610713] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
Mar 10 19:38:39 liberator kernel: [ 14.610761] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
Mar 10 19:38:39 liberator kernel: [ 14.612992] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
Mar 10 19:38:39 liberator kernel: [ 14.613041] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Mar 10 19:38:39 liberator kernel: [ 14.634344] Error: Driver 'pcspkr' is already registered, aborting...
Mar 10 19:38:39 liberator kernel: [ 14.638401] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Mar 10 19:38:39 liberator kernel: [ 14.823763] [drm] radeon kernel modesetting enabled.
Mar 10 19:38:39 liberator kernel: [ 14.823965] radeon 0000:01:00.0: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 14.824074] radeon 0000:01:00.0: power state changed by ACPI to D0
Mar 10 19:38:39 liberator kernel: [ 14.824121] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 14.834511] [drm] radeon: Initializing kernel modesetting.
Mar 10 19:38:39 liberator kernel: [ 14.834993] [drm] register mmio base: 0xC0100000
Mar 10 19:38:39 liberator kernel: [ 14.835029] [drm] register mmio size: 65536
Mar 10 19:38:39 liberator kernel: [ 14.835512] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Mar 10 19:38:39 liberator kernel: [ 14.835567] [drm] Generation 2 PCI interface, using max accessible memory
Mar 10 19:38:39 liberator kernel: [ 14.835633] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
Mar 10 19:38:39 liberator kernel: [ 14.835793] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
Mar 10 19:38:39 liberator kernel: [ 14.835898] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
Mar 10 19:38:39 liberator kernel: [ 14.835963] [drm] radeon: VRAM 128M
Mar 10 19:38:39 liberator kernel: [ 14.835999] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
Mar 10 19:38:39 liberator kernel: [ 14.836077] [drm] radeon: GTT 256M
Mar 10 19:38:39 liberator kernel: [ 14.836113] [drm] radeon: GTT from 0xD0000000 to 0xDFFFFFFF
Mar 10 19:38:39 liberator kernel: [ 14.836171] [drm] radeon: irq initialized.
Mar 10 19:38:39 liberator kernel: [ 14.836561] [drm] Detected VRAM RAM=128M, BAR=128M
Mar 10 19:38:39 liberator kernel: [ 14.836603] [drm] RAM width 128bits DDR
Mar 10 19:38:39 liberator kernel: [ 14.840811] [TTM] Zone kernel: Available graphics memory: 443536 kiB.
Mar 10 19:38:39 liberator kernel: [ 14.840890] [TTM] Zone highmem: Available graphics memory: 777044 kiB.
Mar 10 19:38:39 liberator kernel: [ 14.842225] [drm] radeon: 128M of VRAM memory ready
Mar 10 19:38:39 liberator kernel: [ 14.842265] [drm] radeon: 256M of GTT memory ready.
Mar 10 19:38:39 liberator kernel: [ 14.842537] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
Mar 10 19:38:39 liberator kernel: [ 14.842582] [drm] radeon: cp idle (0x10000C03)
Mar 10 19:38:39 liberator kernel: [ 14.842849] [drm] Loading R300 Microcode
Mar 10 19:38:39 liberator kernel: [ 14.843212] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Mar 10 19:38:39 liberator kernel: [ 14.933353] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 14.933425] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 14.944560] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 10 19:38:39 liberator kernel: [ 14.944708] Intel ICH 0000:00:1f.5: setting latency timer to 64
Mar 10 19:38:39 liberator kernel: [ 15.337040] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
Mar 10 19:38:39 liberator kernel: [ 15.338570] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.339053] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.339652] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.340441] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
Mar 10 19:38:39 liberator kernel: [ 15.341960] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.342450] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.343033] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
Mar 10 19:38:39 liberator kernel: [ 15.344967] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
Mar 10 19:38:39 liberator kernel: [ 15.345009] [drm:r100_cp_init] *ERROR* Failed to load firmware!
Mar 10 19:38:39 liberator kernel: [ 15.345046] radeon 0000:01:00.0: failled initializing CP (-2).
Mar 10 19:38:39 liberator kernel: [ 15.345083] radeon 0000:01:00.0: Disabling GPU acceleration
Mar 10 19:38:39 liberator kernel: [ 15.345122] [drm] radeon: cp finalized
Mar 10 19:38:39 liberator kernel: [ 15.345370] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Mar 10 19:38:39 liberator kernel: [ 15.345408] [drm] radeon: cp finalized
Mar 10 19:38:39 liberator kernel: [ 15.345826] [TTM] Zone kernel: Used memory at exit: 0 kiB.
Mar 10 19:38:39 liberator kernel: [ 15.345866] [TTM] Zone highmem: Used memory at exit: 0 kiB.
Mar 10 19:38:39 liberator kernel: [ 15.345903] [drm] radeon: ttm finalized
Mar 10 19:38:39 liberator kernel: [ 15.345940] [drm] Forcing AGP to PCI mode
Mar 10 19:38:39 liberator kernel: [ 15.346380] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Mar 10 19:38:39 liberator kernel: [ 15.346426] [drm] Generation 2 PCI interface, using max accessible memory
Mar 10 19:38:39 liberator kernel: [ 15.346465] [drm] radeon: VRAM 128M
Mar 10 19:38:39 liberator kernel: [ 15.346499] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
Mar 10 19:38:39 liberator kernel: [ 15.346535] [drm] radeon: GTT 512M
Mar 10 19:38:39 liberator kernel: [ 15.346568] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
Mar 10 19:38:39 liberator kernel: [ 15.346621] [drm] radeon: irq initialized.
Mar 10 19:38:39 liberator kernel: [ 15.346661] [drm] Detected VRAM RAM=128M, BAR=128M
Mar 10 19:38:39 liberator kernel: [ 15.346696] [drm] RAM width 128bits DDR
Mar 10 19:38:39 liberator kernel: [ 15.347086] [TTM] Zone kernel: Available graphics memory: 443536 kiB.
Mar 10 19:38:39 liberator kernel: [ 15.347125] [TTM] Zone highmem: Available graphics memory: 777044 kiB.
Mar 10 19:38:39 liberator kernel: [ 15.347179] [drm] radeon: 128M of VRAM memory ready
Mar 10 19:38:39 liberator kernel: [ 15.347214] [drm] radeon: 512M of GTT memory ready.
Mar 10 19:38:39 liberator kernel: [ 15.347251] [drm] GART: num cpu pages 131072, num gpu pages 131072
Mar 10 19:38:39 liberator kernel: [ 15.349153] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
Mar 10 19:38:39 liberator kernel: [ 15.349203] [drm] radeon: cp idle (0x10000C03)
Mar 10 19:38:39 liberator kernel: [ 15.351056] [drm] Loading R300 Microcode
Mar 10 19:38:39 liberator kernel: [ 15.352271] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Mar 10 19:38:39 liberator kernel: [ 15.360435] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
Mar 10 19:38:39 liberator kernel: [ 15.360478] [drm:r100_cp_init] *ERROR* Failed to load firmware!
Mar 10 19:38:39 liberator kernel: [ 15.360516] radeon 0000:01:00.0: failled initializing CP (-2).
Mar 10 19:38:39 liberator kernel: [ 15.360552] radeon 0000:01:00.0: Disabling GPU acceleration
Mar 10 19:38:39 liberator kernel: [ 15.360591] [drm] radeon: cp finalized
Mar 10 19:38:39 liberator kernel: [ 15.361416] [drm] DFP table revision: 4
Mar 10 19:38:39 liberator kernel: [ 15.361505] [drm] Panel ID String: 1600x1200
Mar 10 19:38:39 liberator kernel: [ 15.361542] [drm] Panel Size 1600x1200
Mar 10 19:38:39 liberator kernel: [ 15.361608] [drm] Default TV standard: NTSC
Mar 10 19:38:39 liberator kernel: [ 15.361642] [drm] 27.000000000 MHz TV ref clk
Mar 10 19:38:39 liberator kernel: [ 15.361677] [drm] No TV DAC info found in BIOS
Mar 10 19:38:39 liberator kernel: [ 15.361712] [drm] Default TV standard: NTSC
Mar 10 19:38:39 liberator kernel: [ 15.361746] [drm] 27.000000000 MHz TV ref clk
Mar 10 19:38:39 liberator kernel: [ 15.361811] [drm] Radeon Display Connectors
Mar 10 19:38:39 liberator kernel: [ 15.361846] [drm] Connector 0:
Mar 10 19:38:39 liberator kernel: [ 15.361879] [drm] VGA
Mar 10 19:38:39 liberator kernel: [ 15.361912] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
Mar 10 19:38:39 liberator kernel: [ 15.361949] [drm] Encoders:
Mar 10 19:38:39 liberator kernel: [ 15.361982] [drm] CRT1: INTERNAL_DAC1
Mar 10 19:38:39 liberator kernel: [ 15.362016] [drm] Connector 1:
Mar 10 19:38:39 liberator kernel: [ 15.362049] [drm] DVI-D
Mar 10 19:38:39 liberator kernel: [ 15.362081] [drm] HPD1
Mar 10 19:38:39 liberator kernel: [ 15.362114] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
Mar 10 19:38:39 liberator kernel: [ 15.362151] [drm] Encoders:
Mar 10 19:38:39 liberator kernel: [ 15.362184] [drm] DFP1: INTERNAL_TMDS1
Mar 10 19:38:39 liberator kernel: [ 15.362218] [drm] Connector 2:
Mar 10 19:38:39 liberator kernel: [ 15.362251] [drm] LVDS
Mar 10 19:38:39 liberator kernel: [ 15.362283] [drm] Encoders:
Mar 10 19:38:39 liberator kernel: [ 15.362316] [drm] LCD1: INTERNAL_LVDS
Mar 10 19:38:39 liberator kernel: [ 15.362350] [drm] Connector 3:
Mar 10 19:38:39 liberator kernel: [ 15.362383] [drm] S-video
Mar 10 19:38:39 liberator kernel: [ 15.362415] [drm] Encoders:
Mar 10 19:38:39 liberator kernel: [ 15.362448] [drm] TV1: INTERNAL_DAC2
Mar 10 19:38:39 liberator kernel: [ 15.454779] [drm] fb mappable at 0xE0040000
Mar 10 19:38:39 liberator kernel: [ 15.454819] [drm] vram apper at 0xE0000000
Mar 10 19:38:39 liberator kernel: [ 15.454853] [drm] size 7680000
Mar 10 19:38:39 liberator kernel: [ 15.454886] [drm] fb depth is 24
Mar 10 19:38:39 liberator kernel: [ 15.454919] [drm] pitch is 6400
Mar 10 19:38:39 liberator kernel: [ 15.594118] Console: switching to colour frame buffer device 200x75
Mar 10 19:38:39 liberator kernel: [ 15.639057] fb0: radeondrmfb frame buffer device
Mar 10 19:38:39 liberator kernel: [ 15.639224] registered panic notifier
Mar 10 19:38:39 liberator kernel: [ 15.639938] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
Mar 10 19:38:39 liberator kernel: [ 15.868042] intel8x0_measure_ac97_clock: measured 55356 usecs (2667 samples)
Mar 10 19:38:39 liberator kernel: [ 15.868298] intel8x0: clocking to 48000
Mar 10 19:38:39 liberator kernel: [ 16.641471] Adding 5242872k swap on /dev/mapper/vg--liberator-lv--swap. Priority:-1 extents:1 across:5242872k
Mar 10 19:38:39 liberator kernel: [ 16.652633] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar 10 19:38:39 liberator kernel: [ 16.653722] EXT3 FS on dm-1, internal journal
Mar 10 19:38:39 liberator kernel: [ 18.532254] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Mar 10 19:38:39 liberator kernel: [ 18.602278] kjournald starting. Commit interval 5 seconds
Mar 10 19:38:39 liberator kernel: [ 18.602486] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar 10 19:38:39 liberator kernel: [ 18.604307] EXT3 FS on dm-3, internal journal
Mar 10 19:38:39 liberator kernel: [ 18.604485] EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 19:38:39 liberator kernel: [ 18.673029] kjournald starting. Commit interval 5 seconds
Mar 10 19:38:39 liberator kernel: [ 18.673600] EXT3 FS on dm-2, internal journal
Mar 10 19:38:39 liberator kernel: [ 18.673770] EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 19:38:39 liberator kernel: [ 19.979440] IBM TrackPoint firmware: 0x0e, buttons: 3/3
Mar 10 19:38:39 liberator kernel: [ 20.194809] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
Mar 10 19:38:59 liberator kernel: [ 42.207671] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
Mar 10 19:38:59 liberator kernel: [ 42.207676] PM: Basic memory bitmaps created
--- End Message ---