--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-686: "ARtem Onair ComCard 11"-variation not supported (but possibly could)
- From: Mitsch Jarosch <mitsch@riotmusic.de>
- Date: Wed, 03 Dec 2008 14:07:05 +0100
- Message-id: <20081203130705.3313.78057.reportbug@scheidungsgrund.confusion>
Package: linux-image-2.6.26-1-686
Version: 2.6.26-10
Severity: normal
Hi there!
I recently bought a WLAN-PCMCIA-adaptor from Ebay, named "ARtem Onair
Comcard 11", which is reported to work with linux on several places in
the internet. Well - my special card doesn't work. But this is not a
"How can I get my device to work with Linux" issue, I promise! I did
some investigation about this card, which I want to tell you, and I hope
that this will help someone of the debian-kernel-team to get things right!
By the way: A similar report was also sent to kernel.org.
O.k. - here's what I found:
My card's got an alternate label on the backside, saying:
"CC-W11-EMB PC-ETS-128"
The modalias of the card looks like this:
#cat /sys/bus/pcmcia/devices/1.0/modalias
pcmcia:m0268c0003f06fn00pfn00pa7CE6F45Bpb427B2E41pc3284C1FFpd00000000
The PCMCIA-Subsystem of a recent Kernel (2.6.26) prints out:
#pccard ident
Socket 1:
product info: "ARtem", "Onair", "Version 1.0", ""
manfid: 0x0268, 0x0003
function: 6 (network)
When I plug this card to my Debian Laptop, there won't happen that much.
No module is loaded. The kernel just prints out some stuff
to /var/log/syslog, saying:
kernel: pccard: PCMCIA card inserted into slot 1
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
kernel: pcmcia: registering new device pcmcia1.0
No big surprise: There is no kernel module with a fitting modalias!
I also tried this card with Deli-Linux 0.7, a distro, which is specially
made for old Devices. It uses the 2.4.34.4 kernel. There's also no
module loading when plugging in the card - initially.
In the PCMCIA configuration file /etc/pcmcia/config I found something
interesting:
card "ARtem Onair Version 1.0"
#version "ARtem", "Onair", "Version 1.0"
manfid 0x0268, 0x0001
bind "orinoco_cs"
which says to me that another Version of the ARtem Onair card with the
same chipset, but another manfid would just work. I edited the file and
changed the manfid from 0x0001 to 0x0003 and restarted the
pcmcia-daemon. When I now plug the card in, the modules "orinoco_cs",
"orinoco" and "hermes" are loaded and I get a network device, named
eth0. Now I can do some configuration with iwconfig. I also tried
changing the driver to "wavelan_cs" (because of an entry on
tuxmobil.org, look here: http://tuxmobil.org/pcmcia_ci10339.html ) -
looks the same to me.
I don't know if this card does perfectly work with this driver. Scanning
(with "iwlist eth0 scanning") is not supported and I can get no
WEP-connection with any accesspoints at home - simply because there
aren't any accesspoints that supports WEP. There would be some WPA-APs,
but the package wpa-supplicant is not included in Deli-Linux. So: I
haven't managed to get a wifi-connection on Deli with this card and these
drivers!
On Debian Lenny loading the modules manually didn't lead to a
network-device. This can mean that "orinoco_cs" and "wavelan_cs" are not
the right modules and maybe that there aren't any working modules in
kernel 2.6.26 for this card any more. This can also mean, that I should
have to create also the network-device manually - but I don't know how.
Although I haven't ever managed to get a wifi-connection with this card,
it doesn't seem to me that support for this card on a recent kernel
is far away. And maybe someone with better capabilities than me should
get this thing done.
I'm very interested in helping! I want this device working, so don't
hesitate asking me!
greetings
Mitsch Jarosch
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 19:00:26 UTC 2008
** Command line:
root=/dev/mapper/scheidungsgrund-root ro quiet vga=791
** Not tainted
** Kernel log:
[ 10.265855] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=62016/15/63
[ 10.268028] hda: cache flushes supported
[ 10.268028] hda: hda1 hda2
[ 10.296028] hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
[ 10.296028] Uniform CD-ROM driver Revision: 3.20
[ 10.652019] device-mapper: uevent: version 1.0.3
[ 10.652019] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 329.668040] PM: Starting manual resume from disk
[ 329.793725] kjournald starting. Commit interval 5 seconds
[ 329.795403] EXT3-fs: mounted filesystem with ordered data mode.
[ 333.044014] udevd version 125 started
[ 336.608014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 336.705108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 336.816015] Linux agpgart interface v0.103
[ 336.888016] agpgart: Detected an Intel 440BX Chipset.
[ 336.892037] agpgart: AGP aperture is 64M @ 0xf4000000
[ 337.448965] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
[ 337.450805] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 337.452019] Yenta: Routing CardBus interrupts to PCI
[ 337.452019] Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
[ 337.684016] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 337.684016] Socket status: 30000006
[ 337.684016] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
[ 337.684016] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 337.684016] Yenta: Routing CardBus interrupts to PCI
[ 337.684016] Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
[ 337.915461] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 337.916020] Socket status: 30000006
[ 338.236024] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 338.237868] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 338.240073] piix4_smbus: probe of 0000:00:07.3 failed with error -1
[ 338.364018] input: PC Speaker as /class/input/input1
[ 338.783235] input: Power Button (FF) as /class/input/input2
[ 338.812016] ACPI: Power Button (FF) [PWRF]
[ 338.812016] input: Lid Switch as /class/input/input3
[ 338.828019] ACPI: Lid Switch [LID]
[ 338.829891] input: Sleep Button (CM) as /class/input/input4
[ 338.840018] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 338.872040] ACPI: Sleep Button (CM) [SLPB]
[ 338.904020] input: TPPS/2 IBM TrackPoint as /class/input/input5
[ 340.136027] input: Video Bus as /class/input/input6
[ 340.384025] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 343.040015] parport_pc 00:0d: reported by Plug and Play ACPI
[ 343.060248] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 343.156025] ACPI: Battery Slot [BAT0] (battery present)
[ 343.248018] NET: Registered protocol family 23
[ 343.284024] ACPI: AC Adapter [AC] (off-line)
[ 343.530042] nsc-ircc, chip->init
[ 343.548147] nsc-ircc, Found chip at base=0x02e
[ 343.565446] nsc-ircc, driver loaded (Dag Brattli)
[ 343.581954] nsc_ircc_open(), can't get iobase of 0x2f8
[ 343.598510] nsc-ircc, Found chip at base=0x02e
[ 343.615028] nsc-ircc, driver loaded (Dag Brattli)
[ 343.631304] nsc_ircc_open(), can't get iobase of 0x2f8
[ 343.647811] nsc-ircc 00:0e: disabled
[ 344.380041] cs: IO port probe 0x100-0x3af: clean.
[ 344.397474] cs: IO port probe 0x100-0x3af: clean.
[ 344.411939] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 344.427410] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 344.540031] cs: IO port probe 0x820-0x8ff: clean.
[ 344.632017] cs: IO port probe 0x820-0x8ff: clean.
[ 344.712925] cs: IO port probe 0xc00-0xcf7: clean.
[ 344.796030] cs: IO port probe 0xc00-0xcf7: clean.
[ 344.872025] cs: IO port probe 0xa00-0xaff: clean.
[ 344.924019] cs: IO port probe 0xa00-0xaff: clean.
[ 346.752105] EXT3 FS on dm-1, internal journal
[ 347.284034] loop: module loaded
[ 347.392040] Non-volatile memory driver v1.2
[ 347.528014] [drm] Initialized drm 1.1.0 20060810
[ 347.552038] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 347.569073] [drm] Initialized r128 2.5.0 20030725 on minor 0
[ 349.580622] kjournald starting. Commit interval 5 seconds
[ 349.600577] EXT3 FS on hda1, internal journal
[ 349.613668] EXT3-fs: mounted filesystem with ordered data mode.
[ 349.672587] kjournald starting. Commit interval 5 seconds
[ 349.696295] EXT3 FS on dm-3, internal journal
[ 349.712012] EXT3-fs: mounted filesystem with ordered data mode.
[ 349.799605] Adding 380920k swap on /dev/mapper/scheidungsgrund-swap_1. Priority:-1 extents:1 across:380920k
[ 351.444022] ttyS1: LSR safety check engaged!
[ 351.496031] ttyS1: LSR safety check engaged!
[ 352.156040] eth0: setting full-duplex.
[ 355.664014] NET: Registered protocol family 10
[ 355.664014] lo: Disabled Privacy Extensions
[ 358.300185] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 362.428031] ttyS1: LSR safety check engaged!
[ 363.740019] Bluetooth: Core ver 2.11
[ 363.780023] NET: Registered protocol family 31
[ 363.796343] Bluetooth: HCI device and connection manager initialized
[ 363.816185] Bluetooth: HCI socket layer initialized
[ 364.100035] Bluetooth: L2CAP ver 2.9
[ 364.116097] Bluetooth: L2CAP socket layer initialized
[ 364.302997] Bluetooth: RFCOMM socket layer initialized
[ 364.316629] Bluetooth: RFCOMM TTY layer initialized
[ 364.336242] Bluetooth: RFCOMM ver 1.8
[ 364.548028] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 364.562228] Bluetooth: BNEP filters: protocol multicast
[ 365.712368] eth0: no IPv6 routers present
[ 3943.308170] pccard: PCMCIA card inserted into slot 1
[ 3943.308170] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 3943.316015] pcmcia: registering new device pcmcia1.0
** Loaded modules:
Module Size Used by
bnep 10304 0
rfcomm 28272 0
l2cap 17248 6 bnep,rfcomm
bluetooth 44900 5 bnep,rfcomm,l2cap
speedstep_smi 4112 0
speedstep_lib 4516 1 speedstep_smi
cpufreq_ondemand 6476 0
cpufreq_stats 3776 0
cpufreq_conservative 5960 0
ipv6 235300 10
freq_table 4224 3 speedstep_smi,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
r128 32288 0
drm 65256 1 r128
nvram 7116 1
loop 12748 0
irtty_sir 4480 0
sir_dev 10724 1 irtty_sir
pcmcia 29548 0
firmware_class 6816 1 pcmcia
irda 95480 1 sir_dev
ac 4196 0
crc_ccitt 2080 1 irda
battery 10180 0
parport_pc 22500 0
parport 30988 1 parport_pc
video 16400 0
output 2912 1 video
button 6064 0
serio_raw 4740 0
pcspkr 2432 0
i2c_piix4 7216 0
i2c_core 19828 1 i2c_piix4
psmouse 32336 0
yenta_socket 20620 4
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
intel_agp 22332 1
agpgart 28776 2 drm,intel_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
evdev 8000 5
ext3 105416 3
jbd 39444 1 ext3
mbcache 7108 1 ext3
sha256_generic 11360 0
aes_i586 7744 2
aes_generic 29256 1 aes_i586
cbc 3264 1
dm_crypt 11172 1
crypto_blkcipher 15236 3 cbc,dm_crypt
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 13 dm_crypt,dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
ata_generic 4676 0
libata 140384 1 ata_generic
scsi_mod 129356 1 libata
ide_pci_generic 3908 0 [permanent]
floppy 47716 0
uhci_hcd 18672 0
usbcore 118160 2 uhci_hcd
piix 6568 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,piix
dock 8272 1 libata
3c59x 35624 0
mii 4896 1 3c59x
thermal 15228 0
processor 32576 2 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 CardBus bridge [0607]: Texas Instruments PCI1450 [104c:ac1b] (rev 03)
Subsystem: IBM ThinkPad A21m/T20/T22 [1014:0130]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10000000-13fff000 (prefetchable)
Memory window 1: 14000000-17fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:02.1 CardBus bridge [0607]: Texas Instruments PCI1450 [104c:ac1b] (rev 03)
Subsystem: IBM ThinkPad A21m/T20/T22 [1014:0130]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 1c000000-1ffff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:03.0 Ethernet controller [0200]: 3Com Corporation 3c556B CardBus [Tornado] [10b7:6056] (rev 20)
Subsystem: 3Com Corporation Device [10b7:6356]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at f0101400 (32-bit, non-prefetchable) [size=128]
Region 2: Memory at f0101000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: 3c59x
Kernel modules: 3c59x
00:03.1 Communication controller [0780]: 3Com Corporation Mini PCI 56k Winmodem [10b7:1007] (rev 20)
Subsystem: 3Com Corporation Device [10b7:6159]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f0101c00 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f0101800 (32-bit, non-prefetchable) [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:05.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
Subsystem: IBM ThinkPad A20m [1014:0153]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 1c00 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1c20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel modules: i2c-piix4
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02) (prog-if 00 [VGA controller])
Subsystem: IBM IBM Thinkpad A22p [1014:0155]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at f0200000 (32-bit, non-prefetchable) [size=16K]
[virtual] Expansion ROM at f0220000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: aty128fb
** Sound cards:
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-16 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---