--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: WinTV-HVR1300: tuner-simple: couldn't set tuner type
- From: Rafael Varela Pet <rafael.varela+debianbts@gmail.com>
- Date: Sun, 20 Feb 2011 21:14:51 +0100
- Message-id: <20110220201451.5540.22101.reportbug@deneb.casa.local>
Package: linux-2.6
Version: 2.6.32-30
Severity: normal
Kernel does not properly set the tuner type, falling back to another one. This breaks tuning functionality in TV programs like Kaffeine.
Here's an extract from the kernel log:
Feb 20 18:31:11 deneb kernel: [ 8.807044] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
Feb 20 18:31:11 deneb kernel: [ 8.807046] cx88[0]: TV tuner type 63, Radio tuner type -1
Feb 20 18:31:11 deneb kernel: [ 8.926574] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
Feb 20 18:31:11 deneb kernel: [ 8.997772] tuner 1-0043: chip found @ 0x86 (cx88[0])
Feb 20 18:31:11 deneb kernel: [ 9.048390] tuner 1-0061: chip found @ 0xc2 (cx88[0])
Feb 20 18:31:11 deneb kernel: [ 9.086591] tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
Feb 20 18:31:11 deneb kernel: [ 9.086601] cx88[0]: hauppauge eeprom: model=96019
Feb 20 18:31:11 deneb kernel: [ 9.117041] tuner-simple 1-0061: creating new instance
Feb 20 18:31:11 deneb kernel: [ 9.117044] tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
Feb 20 18:31:11 deneb kernel: [ 9.299118] tuner-simple 1-0061: attaching existing instance
Feb 20 18:31:11 deneb kernel: [ 9.299121] tuner-simple 1-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
In contrast, booting with Lenny (kernel 2.6.26), tuner type is set correctly and tuning works OK:
Feb 17 16:51:17 deneb kernel: [ 0.000000] Linux version 2.6.26-2-686-bigmem (Debian 2.6.26-26lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2
Feb 17 16:51:17 deneb kernel: [ 18.613837] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
Feb 17 16:51:17 deneb kernel: [ 18.613837] cx88[0]: TV tuner type 63, Radio tuner type -1
Feb 17 16:51:17 deneb kernel: [ 18.757981] tuner' 1-0061: chip found @ 0xc2 (cx88[0])
Feb 17 16:51:17 deneb kernel: [ 18.757981] tuner' 1-0063: chip found @ 0xc6 (cx88[0])
Feb 17 16:51:17 deneb kernel: [ 18.858716] tuner-simple 1-0061: creating new instance
Feb 17 16:51:17 deneb kernel: [ 18.858716] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Feb 17 16:51:17 deneb kernel: [ 18.930322] tuner-simple 1-0061: attaching existing instance
Feb 17 16:51:17 deneb kernel: [ 18.930363] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:40:25 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem root=UUID=3941ff55-d4b9-457c-b30b-f046ec641d73 ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 27.032005] eth0: no IPv6 routers present
[ 30.170966] Bluetooth: Core ver 2.15
[ 30.171127] NET: Registered protocol family 31
[ 30.171129] Bluetooth: HCI device and connection manager initialized
[ 30.171131] Bluetooth: HCI socket layer initialized
[ 30.189644] Bluetooth: L2CAP ver 2.14
[ 30.189647] Bluetooth: L2CAP socket layer initialized
[ 30.323281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.323283] Bluetooth: BNEP filters: protocol multicast
[ 30.374323] Bridge firewalling registered
[ 30.411137] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.411140] Bluetooth: SCO socket layer initialized
[ 31.740584] lp0: using parport0 (interrupt-driven).
[ 31.811958] ppdev: user-space parallel port driver
[ 32.644504] vmnet1: no IPv6 routers present
[ 33.508504] vmnet8: no IPv6 routers present
[ 91.270702] CPU0 attaching NULL sched-domain.
[ 91.270706] CPU1 attaching NULL sched-domain.
[ 91.296539] CPU0 attaching sched-domain:
[ 91.296543] domain 0: span 0-1 level MC
[ 91.296545] groups: 0 1
[ 91.296550] CPU1 attaching sched-domain:
[ 91.296552] domain 0: span 0-1 level MC
[ 91.296554] groups: 1 0
[ 320.232009] usb 9-4: new high speed USB device using ehci_hcd and address 3
[ 320.366145] usb 9-4: New USB device found, idVendor=152d, idProduct=2338
[ 320.366148] usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 320.366151] usb 9-4: Product: USB to ATA/ATAPI Bridge
[ 320.366153] usb 9-4: Manufacturer: JMicron
[ 320.366155] usb 9-4: SerialNumber: 3BA27540261A
[ 320.366248] usb 9-4: configuration #1 chosen from 1 choice
[ 320.410217] Initializing USB Mass Storage driver...
[ 320.410346] scsi10 : SCSI emulation for USB Mass Storage devices
[ 320.410461] usb-storage: device found at 3
[ 320.410463] usb-storage: waiting for device to settle before scanning
[ 320.410474] usbcore: registered new interface driver usb-storage
[ 320.410477] USB Mass Storage support registered.
[ 325.409252] usb-storage: device scan complete
[ 325.409873] scsi 10:0:0:0: Direct-Access TOSHIBA MK4026GAXB PQ: 0 ANSI: 2 CCS
[ 325.410537] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 325.414576] sd 10:0:0:0: [sdb] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 325.415353] sd 10:0:0:0: [sdb] Write Protect is off
[ 325.415356] sd 10:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 325.415358] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 325.417231] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 325.417235] sdb: sdb1
[ 325.422980] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 325.422984] sd 10:0:0:0: [sdb] Attached SCSI disk
[ 325.733492] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 347.375542] kjournald starting. Commit interval 5 seconds
[ 347.375628] EXT3 FS on dm-0, internal journal
[ 347.375632] EXT3-fs: mounted filesystem with ordered data mode.
[ 1763.696038] hub 8-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[ 1763.696043] usb 8-2: USB disconnect, address 2
[ 1763.696198] usblp1: removed
[ 1763.936010] usb 8-2: new full speed USB device using uhci_hcd and address 3
[ 1764.142097] usb 8-2: New USB device found, idVendor=03f0, idProduct=3a02
[ 1764.142100] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1764.142102] usb 8-2: Product: photosmart 7150
[ 1764.142104] usb 8-2: Manufacturer: hp
[ 1764.142106] usb 8-2: SerialNumber: MY2A9441QW2F
[ 1764.142199] usb 8-2: configuration #1 chosen from 1 choice
[ 1764.153140] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3A02
[ 1765.228018] usb 9-4: USB disconnect, address 3
[ 1931.674906] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4
[ 1931.675007] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675011] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675014] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675017] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675020] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675023] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675026] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675029] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675032] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675035] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 1931.675041] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988544] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4
[ 2506.988637] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988641] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988644] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988647] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988650] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988653] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988656] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988659] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988662] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988665] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2506.988671] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270339] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4
[ 2510.270436] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270439] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270443] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270446] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270449] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270452] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270455] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270458] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270461] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270464] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
[ 2510.270471] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
** Model information
not available
** Loaded modules:
Module Size Used by
nls_utf8 908 0
nls_cp437 4489 0
vfat 6570 0
fat 34912 1 vfat
usb_storage 30617 0
binfmt_misc 4907 1
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
l2cap 21705 3 bnep
crc16 1027 1 l2cap
bluetooth 36319 5 sco,bnep,l2cap
rfkill 10264 3 bluetooth
vmnet 31885 13
vmblock 8518 1
vsock 29259 0
vmci 41779 1 vsock
vmmon 53796 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
deflate 1315 0
zlib_deflate 15822 1 deflate
ctr 2703 0
twofish 5665 0
twofish_common 12560 1 twofish
camellia 16843 0
serpent 16187 0
blowfish 7252 0
cast5 15593 0
des_generic 15027 0
cbc 2047 0
aes_i586 6816 0
aes_generic 25738 1 aes_i586
xcbc 1925 0
rmd160 9448 0
sha256_generic 10748 0
sha1_generic 1395 0
hmac 2033 0
crypto_null 1876 0
af_key 23390 0
fuse 44033 1
dm_crypt 9264 0
it87 11499 0
hwmon_vid 1528 1 it87
eeprom 2609 0
acpi_cpufreq 4951 0
loop 9765 0
cx88_blackbird 10944 0
cx2341x 8257 1 cx88_blackbird
cx22702 3717 1
cx88_dvb 14300 0
cx88_vp3054_i2c 1264 1 cx88_dvb
videobuf_dvb 3390 1 cx88_dvb
dvb_core 62650 2 cx88_dvb,videobuf_dvb
wm8775 2259 1
tuner_simple 9694 2
tuner_types 7537 1 tuner_simple
tda9887 6997 1
snd_hda_codec_realtek 163294 1
tda8290 7865 0
tuner 14428 2
snd_hda_intel 16895 1
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
cx88_alsa 6107 0
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_seq_midi 3576 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_rawmidi 12513 1 snd_seq_midi
snd_pcm 47386 4 snd_hda_intel,snd_hda_codec,cx88_alsa,snd_pcm_oss
cx8802 9409 2 cx88_blackbird,cx88_dvb
cx8800 20227 1 cx88_blackbird
snd_seq_midi_event 3684 1 snd_seq_midi
cx88xx 59172 5 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
ir_common 22187 1 cx88xx
v4l2_common 9820 6 cx88_blackbird,cx2341x,wm8775,tuner,cx8800,cx88xx
i2c_algo_bit 3497 2 cx88_vp3054_i2c,cx88xx
videodev 25545 6 cx88_blackbird,wm8775,tuner,cx8800,cx88xx,v4l2_common
tveeprom 9393 1 cx88xx
v4l1_compat 10250 1 videodev
videobuf_dma_sg 7263 6 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
snd_timer 12258 2 snd_pcm,snd_seq
btcx_risc 2527 4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core 10476 6 cx88_blackbird,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
i2c_i801 6466 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
nvidia 9843640 28
joydev 6739 0
shpchp 21264 0
i2c_core 12696 16 eeprom,cx22702,cx88_vp3054_i2c,wm8775,tuner_simple,tda9887,tda8290,tuner,cx8800,cx88xx,v4l2_common,i2c_algo_bit,videodev,tveeprom,i2c_i801,nvidia
pci_hotplug 18065 1 shpchp
snd 34375 14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,cx88_alsa,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 5113 2 snd_hda_intel,snd_pcm
usblp 7899 0
processor 26335 1 acpi_cpufreq
button 3598 0
parport_pc 15907 1
parport 22554 3 ppdev,lp,parport_pc
evdev 5609 15
pcspkr 1207 0
ext3 94204 1
jbd 32169 1 ext3
mbcache 3762 1 ext3
dm_mod 46082 1 dm_crypt
raid10 16733 0
usbhid 28056 0
hid 50893 1 usbhid
raid456 42876 0
async_raid6_recov 4166 1 raid456
async_pq 2647 2 raid456,async_raid6_recov
raid6_pq 77468 2 async_raid6_recov,async_pq
async_xor 1990 3 raid456,async_raid6_recov,async_pq
xor 12418 1 async_xor
async_memcpy 858 2 raid456,async_raid6_recov
async_tx 1326 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 16375 0
raid0 5601 0
multipath 4987 0
linear 3063 0
md_mod 67345 6 raid10,raid456,raid1,raid0,multipath,linear
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25969 3
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
ohci_hcd 17072 0
pata_jmicron 1452 0
uhci_hcd 16141 0
firewire_ohci 17009 0
firewire_core 31287 1 firewire_ohci
crc_itu_t 1035 1 firewire_core
ehci_hcd 28263 0
floppy 40931 0
r8169 25376 0
mii 2714 1 r8169
ahci 27286 3
libata 116061 3 ata_generic,pata_jmicron,ahci
scsi_mod 101433 5 usb_storage,sg,sr_mod,sd_mod,libata
thermal 9206 0
thermal_sys 9378 2 processor,thermal
usbcore 98801 7 usb_storage,usblp,usbhid,ohci_hcd,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e4000000-e7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ee105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at ee100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ee200000-ee3fffff
Prefetchable memory behind bridge: 00000000ee400000-00000000ee5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ee000000-ee0fffff
Prefetchable memory behind bridge: 00000000ee600000-00000000ee7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000ee800000-00000000ee9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ee104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=06, sec-latency=32
Memory behind bridge: ea000000-edffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA AHCI Controller [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at e600 [size=8]
Region 1: I/O ports at e700 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e900 [size=4]
Region 4: I/O ports at ea00 [size=32]
Region 5: Memory at ee106000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ee107000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:4016]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at b000 [size=128]
[virtual] Expansion ROM at e7000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at ee000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c100 [size=4]
Region 2: I/O ports at c200 [size=8]
Region 3: I/O ports at c300 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at e9000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at ee800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
05:00.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
05:00.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
05:01.0 PCI bridge [0604]: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) [3388:0021] (rev 15) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: ed000000-ed0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:08.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec Device [9004:1135]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ed007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
06:08.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec Device [9004:1135]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ed004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
06:08.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02) (prog-if 20 [EHCI])
Subsystem: Adaptec Device [9004:11e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at ed005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
06:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Texas Instruments Device [104c:8010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ed006000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 011 Device 004: ID 046d:c70a Logitech, Inc. MX5000 Cordless Desktop
Bus 011 Device 003: ID 046d:c70e Logitech, Inc. MX1000 Bluetooth Laser Mouse
Bus 011 Device 002: ID 046d:0b02 Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 03f0:3a02 Hewlett-Packard PhotoSmart 7150
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=es_ES@euro, LC_CTYPE=es_ES@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686-bigmem recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686-bigmem suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---