[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#613052: marked as done (hisax: Elsa QuickStep 1000 not working)

Your message dated Wed, 19 Jun 2013 18:56:37 +0200
with message-id <20130619165637.GA5133@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #613052,
regarding hisax: Elsa QuickStep 1000 not working
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
613052: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613052
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.32-5-amd64
Version: 2.6.32-30

After upgrading to kernel 2.6.32, my ISDN card is not working anymore.
It looks like the driver can't get the io ports.
The same system with kernel 2.6.26 works alright.

lspci says:
06:01.0 Network controller: Elsa AG QuickStep 1000 (rev 02)

/proc/ioports:
...
d000-dfff : PCI Bus 0000:06
  d480-d483 : 0000:06:01.0
    d480-d483 : qs1000.1
  d800-d87f : 0000:06:01.0
    d800-d87f : qs1000.1
...

When I load the driver (options hisax type=18 protocol=2 id=teles0)
the following is logged:
...
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=teles0 (0)
HiSax: Elsa driver Rev. 2.32.2.4
Elsa: Microlink PCI defined at 0xd480/0xd800 IRQ 22
HiSax: ELSA config port 0xd480-0xd482 already in use
HiSax: Card Elsa PCI not installed !

Here for comparison the same thing with linux-image-2.6.26-2-amd64:
...
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=teles0 (0)
HiSax: Elsa driver Rev. 2.32.2.4
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Elsa: Microlink PCI defined at 0xd480/0xd800 IRQ 22
Elsa: IPAC version 2
Elsa PCI: IRQ 22 count 0
Elsa PCI: IRQ 22 count 3
HiSax: DSS1 Rev. 2.32.2.3
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: