--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-486: Atmel driver claims register interrupt 15 failed, no wireless with 00:0a.0
- From: Arkaitz Jimenez <arkaitzj@gmail.com>
- Date: Thu, 18 Sep 2008 14:26:09 +0100
- Message-id: <20080918132609.2403.36750.reportbug@Tablet.botadurrias.net>
Package: linux-image-2.6.26-1-486
Version: 2.6.26-4
Severity: normal
-- Package-specific info:
** Version:
Linux version 2.6.26-1-486 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Thu Aug 28 11:14:57 UTC 2008
** Command line:
root=/dev/hda1 ro
** Not tainted
** Kernel log:
[ 8.782011] usb usb2: configuration #1 chosen from 1 choice
[ 8.782319] hub 2-0:1.0: USB hub found
[ 8.782494] hub 2-0:1.0: 3 ports detected
[ 9.297553] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.297775] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.297998] usb usb2: Product: OHCI Host Controller
[ 9.298149] usb usb2: Manufacturer: Linux 2.6.26-1-486 ohci_hcd
[ 9.298314] usb usb2: SerialNumber: 0000:00:0c.0
[ 9.298934] ACPI: PCI Interrupt 0000:00:0c.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 9.299993] ohci_hcd 0000:00:0c.1: OHCI Host Controller
[ 9.300763] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
[ 9.301264] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xe8023000
[ 9.885171] usb usb3: configuration #1 chosen from 1 choice
[ 9.885488] hub 3-0:1.0: USB hub found
[ 9.885655] hub 3-0:1.0: 2 ports detected
[ 10.124198] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 10.346406] usb 2-2: configuration #1 chosen from 1 choice
[ 10.360752] usb 2-2: New USB device found, idVendor=05af, idProduct=080a
[ 10.360973] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.361151] usb 2-2: Product: USB K/B+Mouse
[ 10.361290] usb 2-2: Manufacturer: Jing-Mold
[ 10.403739] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.403958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.404265] usb usb3: Product: OHCI Host Controller
[ 10.404423] usb usb3: Manufacturer: Linux 2.6.26-1-486 ohci_hcd
[ 10.404577] usb usb3: SerialNumber: 0000:00:0c.1
[ 10.657017] usbcore: registered new interface driver hiddev
[ 10.672789] input: Jing-Mold USB K/B+Mouse as /class/input/input1
[ 10.680051] input,hidraw0: USB HID v1.10 Keyboard [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2
[ 10.701171] input: Jing-Mold USB K/B+Mouse as /class/input/input2
[ 10.705069] input,hidraw1: USB HID v1.10 Mouse [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2
[ 10.705519] usbcore: registered new interface driver usbhid
[ 10.705625] usbhid: v2.6:USB HID core driver
[ 10.994985] PM: Starting manual resume from disk
[ 11.124203] kjournald starting. Commit interval 5 seconds
[ 11.124883] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.961843] udevd version 125 started
[ 21.838329] Linux agpgart interface v0.103
[ 22.375175] parport_pc: VIA 686A/8231 detected
[ 22.375196] parport_pc: probing current configuration
[ 22.375250] parport_pc: Current parallel port base: 0x0
[ 22.375267] parport_pc: VIA parallel port disabled in BIOS
[ 23.058582] atmel 0000:00:0a.0: enabling device (0010 -> 0013)
[ 23.059642] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
[ 23.059760] PCI: setting IRQ 15 as level-triggered
[ 23.059773] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
[ 23.060247] eth1: register interrupt 15 failed, rc -16
[ 23.168450] VIA 82xx Modem 0000:00:07.6: enabling device (0000 -> 0001)
[ 23.168607] ACPI: PCI Interrupt 0000:00:07.6[C] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 23.168845] VIA 82xx Modem 0000:00:07.6: VIA VLink IRQ fixup, from 255 to 7
[ 23.269670] PCI: Setting latency timer of device 0000:00:07.6 to 64
[ 23.786537] VIA 82xx Audio 0000:00:07.5: enabling device (0000 -> 0001)
[ 23.786703] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 23.786938] VIA 82xx Audio 0000:00:07.5: VIA VLink IRQ fixup, from 255 to 7
[ 23.787301] PCI: Setting latency timer of device 0000:00:07.5 to 64
[ 24.009443] input: PC Speaker as /class/input/input3
[ 24.299673] codec_read: codec 0 is not valid [0x87e5372]
[ 24.306249] codec_read: codec 0 is not valid [0x87e5372]
[ 24.312819] codec_read: codec 0 is not valid [0x87e5372]
[ 24.319476] codec_read: codec 0 is not valid [0x87e5372]
[ 24.375569] Error: Driver 'pcspkr' is already registered, aborting...
[ 24.560707] input: Power Button (FF) as /class/input/input4
[ 24.584575] ACPI: Power Button (FF) [PWRF]
[ 24.585018] input: Power Button (CM) as /class/input/input5
[ 24.590249] Yenta: CardBus bridge found at 0000:00:0b.0 [0e11:00b5]
[ 24.590436] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.590530] Yenta: Routing CardBus interrupts to PCI
[ 24.590623] Yenta TI: socket 0000:00:0b.0, mfunc 0x01001022, devctl 0x64
[ 24.632202] ACPI: Power Button (CM) [PWRB]
[ 24.821487] Yenta: ISA IRQ mask 0x0068, PCI irq 9
[ 24.821610] Socket status: 30000006
[ 24.822887] Yenta: CardBus bridge found at 0000:00:0b.1 [0e11:00b5]
[ 24.823068] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.823157] Yenta: Routing CardBus interrupts to PCI
[ 24.823252] Yenta TI: socket 0000:00:0b.1, mfunc 0x01001022, devctl 0x64
[ 25.052656] Yenta: ISA IRQ mask 0x0068, PCI irq 11
[ 25.052773] Socket status: 30000006
[ 25.144901] ACPI: AC Adapter [AC] (on-line)
[ 25.579040] ACPI: Battery Slot [CMB0] (battery present)
[ 26.025777] Error: Driver 'pcspkr' is already registered, aborting...
[ 27.140731] ACPI: WMI: Mapper loaded
[ 27.188257] input: Video Bus as /class/input/input6
[ 27.247537] ACPI: Video Device [VIDO] (multi-head: yes rom: no post: no)
[ 28.761750] cs: IO port probe 0x100-0x3af: clean.
[ 28.766841] cs: IO port probe 0x3e0-0x4ff: clean.
[ 28.768743] cs: IO port probe 0x820-0x8ff: clean.
[ 28.770451] cs: IO port probe 0xc00-0xcf7: clean.
[ 28.787065] cs: IO port probe 0xa00-0xaff: clean.
[ 28.814280] cs: IO port probe 0x100-0x3af: clean.
[ 28.823343] cs: IO port probe 0x3e0-0x4ff: clean.
[ 28.825338] cs: IO port probe 0x820-0x8ff: clean.
[ 28.827095] cs: IO port probe 0xc00-0xcf7: clean.
[ 28.832324] cs: IO port probe 0xa00-0xaff: clean.
[ 30.921555] Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1 across:1959920k
[ 32.290413] EXT3 FS on hda1, internal journal
[ 33.148658] loop: module loaded
[ 35.900341] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 41.099879] NET: Registered protocol family 10
[ 41.102929] lo: Disabled Privacy Extensions
[ 51.612609] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 225044 10
loop 12428 0
pcmcia 29612 0
video 16272 0
output 2816 1 video
wmi 6440 0
battery 10116 0
ac 4228 0
button 6032 0
psmouse 32016 0
snd_pcsp 8220 0
serio_raw 4740 0
snd_via82xx 20248 0
i2c_viapro 6804 0
gameport 10504 1 snd_via82xx
yenta_socket 20620 2
rsrc_nonstatic 9472 1 yenta_socket
snd_via82xx_modem 9864 0
snd_ac97_codec 88228 2 snd_via82xx,snd_via82xx_modem
atmel_pci 1920 0
i2c_core 19728 1 i2c_viapro
pcmcia_core 31888 3 pcmcia,yenta_socket,rsrc_nonstatic
atmel 28804 1 atmel_pci
ac97_bus 1664 1 snd_ac97_codec
firmware_class 6656 2 pcmcia,atmel
snd_pcm 60808 4 snd_pcsp,snd_via82xx,snd_via82xx_modem,snd_ac97_codec
snd_mpu401_uart 6400 1 snd_via82xx
snd_timer 17668 1 snd_pcm
snd_rawmidi 18720 1 snd_mpu401_uart
snd_seq_device 6412 1 snd_rawmidi
parport_pc 22436 0
via686a 11916 0
snd 45092 9 snd_pcsp,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm,snd_mpu401_uart,snd_timer,snd_rawmidi,snd_seq_device
snd_page_alloc 7816 3 snd_via82xx,snd_via82xx_modem,snd_pcm
soundcore 6112 1 snd
parport 30408 1 parport_pc
efficeon_agp 6048 0
agpgart 28336 1 efficeon_agp
evdev 7808 0
ext3 103432 1
jbd 35092 1 ext3
mbcache 6656 1 ext3
usbhid 35712 0
hid 32128 1 usbhid
ff_memless 4232 1 usbhid
ohci_hcd 18436 0
ehci_hcd 28300 0
usbcore 117616 4 usbhid,ohci_hcd,ehci_hcd
e100 29196 0
mii 4864 1 e100
via82cxxx 6916 0 [permanent]
ide_pci_generic 3844 0 [permanent]
ata_generic 4612 0
libata 141088 1 ata_generic
scsi_mod 129804 1 libata
dock 8076 1 libata
ide_disk 10496 3
thermal 15132 0
processor 28080 2 thermal
fan 4100 0
thermal_sys 10784 4 video,thermal,processor,fan
ide_generic 2432 0 [permanent]
ide_core 91444 4 via82cxxx,ide_pci_generic,ide_disk,ide_generic
** PCI devices:
00:00.0 Host bridge [0600]: Transmeta Corporation LongRun Northbridge [1279:0395] (rev 03)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=1M]
Kernel modules: efficeon-agp
00:00.1 RAM memory [0500]: Transmeta Corporation SDRAM controller [1279:0396]
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: Transmeta Corporation BIOS scratchpad [1279:0397]
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:05.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 Go] [10de:0112] (rev b2)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 30000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: nvidiafb
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: parport_pc
Kernel modules: parport_pc
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 9
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 1040 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: via82cxxx
00:07.4 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 10
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro, via686a
00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 50)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 7
Region 0: I/O ports at 1400 [size=256]
Region 1: I/O ports at 1054 [size=4]
Region 2: I/O ports at 1050 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:07.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 30)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 7
Region 0: I/O ports at 1800 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Modem
Kernel modules: snd-via82xx-modem
00:08.0 Ethernet controller [0200]: Intel Corporation 82551QM Ethernet Controller [8086:1059] (rev 10)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8020000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=64]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at 30010000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: e100, eepro100
00:0a.0 Ethernet controller [0200]: Atmel Corporation at76c506 802.11b Wireless Network Adaptor [1114:0506] (rev 11)
Subsystem: Compaq Computer Corporation Device [0e11:00d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99 (3000ns min, 15000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 15
Region 0: Memory at e8030000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at 1c00 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: atmel_pci
00:0b.0 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 30020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0b.1 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 30021000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0c.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8022000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0c.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e8023000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0c.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02) (prog-if 20)
Subsystem: Compaq Computer Corporation Device [0e11:00b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 7
Region 0: Memory at e8021000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)
Kernel: Linux 2.6.26-1-486
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-486 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-486 recommends no packages.
Versions of packages linux-image-2.6.26-1-486 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-486/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-486/preinst/overwriting-modules-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-overwrite-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-system-map-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/prerm/removing-running-kernel-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/failed-to-move-modules-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-install-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/create-kimage-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/bootloader-test-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/bootloader-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/elilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/initrd-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/bootloader-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/lilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-2.6.26-1-486: false
linux-image-2.6.26-1-486/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-486/prerm/would-invalidate-boot-loader-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/old-dir-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-initrd-2.6.26-1-486: false
Freshly installed system in compaq TC1000 tablet pc
This behaviour is not present at linux-image-2.6.22-3-486 package
--- End Message ---