--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Kernel will freeze sometimes during booting
- From: Prekates Alexandros <aprekates@gmail.com>
- Date: Sun, 19 Dec 2010 02:15:22 +0200
- Message-id: <20101219001522.3322.80731.reportbug@enous.homenet>
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
Tags: squeeze
I installed two days ago debian squeeze beta from dvd. Installation went ok,
but some times during boot up system will freeze with messages like:
BUG: soft lockup - CPU#0 stuck for 61s! [khubd.s] or
BUG: Unable to handle kernel paging request at ffffffffffffffff.
The last time i managed to take a screenshot.
I give two links of images from the screenshot.
<a href=http://www.freeimagehosting.net/image.php?fc2d7b1d7a.jpg><img
src=http://www.freeimagehosting.net/uploads/th.fc2d7b1d7a.jpg alt="Free Image
Hosting by FreeImageHosting.net"></a>
<a href=http://www.freeimagehosting.net/image.php?a5ab47edf7.jpg><img
src=http://www.freeimagehosting.net/uploads/th.a5ab47edf7.jpg alt="Free Image
Hosting by FreeImageHosting.net"></a>
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 15:35:08 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e2205fab-0b56-41a6-8f2f-5bccb43ea074 ro quiet
** Not tainted
** Kernel log:
[ 8.887476] hub 4-2:1.0: 4 ports detected
[ 9.044019] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 9.132030] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 9.317692] usb 5-2: New USB device found, idVendor=046d, idProduct=c318
[ 9.317695] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.317697] usb 5-2: Product: Logitech Illuminated Keyboard
[ 9.317698] usb 5-2: Manufacturer: Logitech
[ 9.317777] usb 5-2: configuration #1 chosen from 1 choice
[ 9.325900] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5
[ 9.325961] generic-usb 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.2-2/input0
[ 9.328759] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input6
[ 9.328827] generic-usb 0003:046D:C318.0003: input,hiddev1,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.2-2/input1
[ 9.568029] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 9.819855] usb 6-2: New USB device found, idVendor=1241, idProduct=1603
[ 9.819857] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.819859] usb 6-2: Product: USB Keyboard
[ 9.819861] usb 6-2: Manufacturer:
[ 9.819940] usb 6-2: configuration #1 chosen from 1 choice
[ 9.870057] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input7
[ 9.870137] generic-usb 0003:1241:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2/input0
[ 9.959918] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input8
[ 9.959968] generic-usb 0003:1241:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2/input1
[ 10.048023] hda-intel: Codec #3 probe error; disabling it...
[ 10.121622] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 10.138629] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.138686] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.138739] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.138796] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.138854] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.138910] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 10.138965] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 10.776389] Adding 8193108k swap on /dev/sda5. Priority:-1 extents:1 across:8193108k
[ 10.789510] Adding 7815612k swap on /dev/sdb2. Priority:-2 extents:1 across:7815612k
[ 11.128906] loop: module loaded
[ 13.244179] usb-storage: device scan complete
[ 13.244653] scsi 4:0:0:0: Direct-Access HP Photosmart D5400 1.00 PQ: 0 ANSI: 5
[ 13.245146] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 13.247267] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 16.120949] EXT4-fs (sda14): mounted filesystem with ordered data mode
[ 17.068177] fuse init (API version 7.13)
[ 17.895619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.925281] wlan0: direct probe to AP 00:1d:19:88:cb:0a (try 1)
[ 19.124038] wlan0: direct probe to AP 00:1d:19:88:cb:0a (try 2)
[ 19.125296] wlan0: direct probe responded
[ 19.125301] wlan0: authenticate with AP 00:1d:19:88:cb:0a (try 1)
[ 19.126428] wlan0: authenticated
[ 19.126446] wlan0: associate with AP 00:1d:19:88:cb:0a (try 1)
[ 19.131843] wlan0: RX AssocResp from 00:1d:19:88:cb:0a (capab=0x431 status=0 aid=3)
[ 19.131847] wlan0: associated
[ 19.132684] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.089691] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 21.144059] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 21.144750] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.472547] wlan0: deauthenticating from 00:1d:19:88:cb:0a by local choice (reason=3)
[ 21.741330] lp: driver loaded but no devices found
[ 21.790866] ppdev: user-space parallel port driver
[ 21.800230] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 21.928156] parport0: irq 5 detected
[ 22.020687] lp0: using parport0 (polling).
[ 23.788721] usb 1-5: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 29.960029] wlan0: no IPv6 routers present
[ 39.289451] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 70.050552] wlan0: direct probe to AP 00:1d:19:88:cb:0a (try 1)
[ 70.051832] wlan0: direct probe responded
[ 70.051836] wlan0: authenticate with AP 00:1d:19:88:cb:0a (try 1)
[ 70.052933] wlan0: authenticated
[ 70.052947] wlan0: associate with AP 00:1d:19:88:cb:0a (try 1)
[ 70.054504] wlan0: RX AssocResp from 00:1d:19:88:cb:0a (capab=0x431 status=0 aid=3)
[ 70.054506] wlan0: associated
[ 72.816077] usb 6-2: USB disconnect, address 2
[ 76.696039] usb 3-2: new high speed USB device using ehci_hcd and address 3
[ 76.829926] usb 3-2: New USB device found, idVendor=058f, idProduct=6362
[ 76.829929] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 76.829932] usb 3-2: Product: Mass Storage Device
[ 76.829934] usb 3-2: Manufacturer: Generic
[ 76.829935] usb 3-2: SerialNumber: 058F63626376
[ 76.830037] usb 3-2: configuration #1 chosen from 1 choice
[ 76.830373] scsi5 : SCSI emulation for USB Mass Storage devices
[ 76.830465] usb-storage: device found at 3
[ 76.830467] usb-storage: waiting for device to settle before scanning
[ 81.829243] usb-storage: device scan complete
[ 81.829830] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 81.830321] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 81.830823] scsi 5:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 81.831319] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 81.831826] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 81.831980] sd 5:0:0:1: Attached scsi generic sg6 type 0
[ 81.832182] sd 5:0:0:2: Attached scsi generic sg7 type 0
[ 81.832349] sd 5:0:0:3: Attached scsi generic sg8 type 0
[ 81.839064] sd 5:0:0:0: [sde] Attached SCSI removable disk
[ 81.839847] sd 5:0:0:1: [sdf] Attached SCSI removable disk
[ 81.840598] sd 5:0:0:2: [sdg] Attached SCSI removable disk
[ 81.841318] sd 5:0:0:3: [sdh] Attached SCSI removable disk
[ 96.407072] sd 5:0:0:3: [sdh] 249856 512-byte logical blocks: (127 MB/122 MiB)
[ 96.407818] sd 5:0:0:3: [sdh] Assuming drive cache: write through
[ 96.409195] sd 5:0:0:3: [sdh] Assuming drive cache: write through
[ 96.409199] sdh: sdh1
[ 100.457463] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 546.537128] sd 5:0:0:3: [sdh] Assuming drive cache: write through
[ 1113.337250] reportbug[3313] trap divide error ip:7fe4c82facf0 sp:7fe4c0d96f60 error:0 in libgtk-x11-2.0.so.0.2000.1[7fe4c81ce000+415000]
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: IDG4510H.86A.0117.2009.0927.1107
board_vendor: Intel Corporation
board_name: DG45ID
board_version: AAE27729-305
** Loaded modules:
Module Size Used by
nls_utf8 1208 1
nls_cp437 5817 1
vfat 7884 1
fat 40038 1 vfat
parport_pc 18855 1
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
acpi_cpufreq 5571 1
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
cpufreq_userspace 1992 0
fuse 50369 1
loop 11799 0
firewire_sbp2 11514 0
snd_hda_codec_idt 42481 1
joydev 8459 0
usbhid 33292 0
hid 63193 1 usbhid
usblp 9571 0
usb_storage 39561 1
firewire_ohci 19676 0
arc4 1274 2
radeon 573596 2
snd_hda_intel 19987 2
ecb 1841 2
ttm 39986 1 radeon
drm_kms_helper 20065 1 radeon
ath5k 112242 0
snd_hda_codec 54244 2 snd_hda_codec_idt,snd_hda_intel
mac80211 137340 1 ath5k
ath 8006 1 ath5k
snd_hwdep 5380 1 snd_hda_codec
cfg80211 101496 3 ath5k,mac80211,ath
rfkill 13044 1 cfg80211
firewire_core 36848 2 firewire_sbp2,firewire_ohci
uhci_hcd 18521 0
ehci_hcd 31151 0
crc_itu_t 1307 1 firewire_core
led_class 2433 1 ath5k
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
usbcore 122034 6 usbhid,usblp,usb_storage,uhci_hcd,ehci_hcd
drm 142359 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
snd_seq 42881 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
e1000e 110047 0
snd 46446 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
i2c_i801 7830 0
nls_base 6377 5 nls_utf8,nls_cp437,vfat,fat,usbcore
sg 18744 0
processor 29935 5 acpi_cpufreq
evdev 7352 15
i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
sr_mod 12602 0
video 17445 0
cdrom 29415 1 sr_mod
output 1692 1 video
pcspkr 1699 0
psmouse 49777 0
button 4650 0
serio_raw 3752 0
ext4 289033 2
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 1 ext4
sd_mod 29889 8
crc_t10dif 1276 1 sd_mod
ata_generic 3047 0
ata_piix 21124 4
libata 133632 2 ata_generic,ata_piix
scsi_mod 122149 6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
thermal 11674 0
thermal_sys 11942 3 processor,video,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
# wireless-* options are implemented by the wireless-tools package
wireless-mode managed
wireless-essid CONNX
wireless-key1 ***************
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:1c:c0:5f:9f:f6 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:30:4f:49:80:5f brd ff:ff:ff:ff:ff:ff
inet 192.168.2.2/24 brd 192.168.2.255 scope global wlan0
inet6 fe80::230:4fff:fe49:805f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 24555 300 0 0 0 0 0 0 24555 300 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 3051704 3562 0 0 0 0 0 0 1131963 4085 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3812 total packets received
0 forwarded
0 incoming packets discarded
3812 incoming packets delivered
4245 requests sent out
34 dropped because of missing route
Icmp:
2 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 2
2 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 2
IcmpMsg:
InType8: 2
OutType0: 2
Tcp:
248 active connections openings
22 passive connection openings
16 failed connection attempts
4 connection resets received
0 connections established
3541 segments received
3755 segments send out
208 segments retransmited
0 bad segments received.
23 resets sent
Udp:
358 packets received
0 packets to unknown port received.
0 packet receive errors
364 packets sent
UdpLite:
TcpExt:
108 TCP sockets finished time wait in fast timer
111 delayed acks sent
Quick ack mode was activated 7 times
8 packets directly queued to recvmsg prequeue.
776 bytes directly in process context from backlog
2116 bytes directly received in process context from prequeue
1849 packet headers predicted
19 packets header predicted and directly queued to user
490 acknowledgments not containing data payload received
136 predicted acknowledgments
12 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
51 other TCP timeouts
6 DSACKs sent for old packets
2 DSACKs received
4 connections reset due to unexpected data
23 connections aborted due to timeout
TCPDSACKIgnoredOld: 2
IpExt:
InMcastPkts: 44
OutMcastPkts: 46
InBcastPkts: 3
InOctets: 3023728
OutOctets: 1008287
InMcastOctets: 7800
OutMcastOctets: 7880
InBcastOctets: 984
*** Device features:
eth0: 0x1109a9
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: c0000000-d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e24] (rev 03)
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0225900 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF-2 Gigabit Network Connection [8086:10cd]
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d0224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at e0e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e0c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0225400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0225000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: d0100000-d01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at e1b0 [size=8]
Region 1: I/O ports at e1a0 [size=4]
Region 2: I/O ports at e190 [size=8]
Region 3: I/O ports at e180 [size=4]
Region 4: I/O ports at e170 [size=16]
Region 5: I/O ports at e160 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0225800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at e150 [size=8]
Region 1: I/O ports at e140 [size=4]
Region 2: I/O ports at e130 [size=8]
Region 3: I/O ports at e120 [size=4]
Region 4: I/O ports at e110 [size=16]
Region 5: I/O ports at e100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV535 [Radeon X1650 Series] [1002:71c7] (rev 9e) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:2160]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0030000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc RV535 [Radeon X1650 Series] [1002:71e7] (rev 9e)
Subsystem: Giga-byte Technology Device [1458:2161]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at d0020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter [168c:0013] (rev 01)
Subsystem: Atheros Communications Inc. TRENDnet TEW-443PI Wireless PCI Adapter [168c:2051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
02:01.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:5002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0110000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at d0111000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c318 Logitech, Inc. Illuminated Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse H3003
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 03f0:6d11 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=el_GR.UTF-8, LC_CTYPE=el_GR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-29 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---